# All Global changes to build and install go here.
# Per the below section about __spec_install_pre, any rpm
# environment changes that affect %%install need to go
# here before the %%install macro is pre-built.
# Include Fedora files
%global include_fedora 0
# Include RHEL files
%global include_rhel 1
# Disable LTO in userspace packages.
%global _lto_cflags %{nil}
# Option to enable compiling with clang instead of gcc.
%bcond_with toolchain_clang
%if %{with toolchain_clang}
%global toolchain clang
%endif
# Compile the kernel with LTO (only supported when building with clang).
%bcond_with clang_lto
%if %{with clang_lto} && %{without toolchain_clang}
{error:clang_lto requires --with toolchain_clang}
%endif
# Cross compile on copr for arm
# See https://bugzilla.redhat.com/1879599
%if 0%{?_with_cross_arm:1}
%global _target_cpu armv7hl
%global _arch arm
%global _build_arch arm
%global _with_cross 1
%endif
# The kernel's %%install section is special
# Normally the %%install section starts by cleaning up the BUILD_ROOT
# like so:
#
# %%__spec_install_pre %%{___build_pre}\
# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
# mkdir "$RPM_BUILD_ROOT"\
# %%{nil}
#
# But because of kernel variants, the %%build section, specifically
# BuildKernel(), moves each variant to its final destination as the
# variant is built. This violates the expectation of the %%install
# section. As a result we snapshot the current env variables and
# purposely leave out the removal section. All global wide changes
# should be added above this line otherwise the %%install section
# will not see them.
%global __spec_install_pre %{___build_pre}
# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
# compression for rpms (xz, level 2).
# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
# to compress by single-threaded xz. Switch to threaded compression,
# and from level 2 to 3 to keep compressed sizes close to "w2" results.
#
# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
# this one might need tweaking (e.g. if default changes to w3.xzdio,
# change below to w4T.xzdio):
#
# This is disabled on i686 as it triggers oom errors
%ifnarch i686
%define _binary_payload w3T.xzdio
%endif
Summary: The Linux kernel
# Set released_kernel to 1 when the upstream source tarball contains a
# kernel release. (This includes prepatch or "rc" releases.)
# Set released_kernel to 0 when the upstream source tarball contains an
# unreleased kernel development snapshot.
%global released_kernel 0
# Set debugbuildsenabled to 1 to build separate base and debug kernels
# (on supported architectures). The kernel-debug-* subpackages will
# contain the debug kernel.
# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
# to build the base kernel using the debug configuration. (Specifying
# the --with-release option overrides this setting.)
%define debugbuildsenabled 1
%global distro_build 29
%if 0%{?fedora}
%define secure_boot_arch x86_64
%else
%define secure_boot_arch x86_64 aarch64 s390x ppc64le
%endif
# Signing for secure boot authentication
%ifarch %{secure_boot_arch}
%global signkernel 1
%else
%global signkernel 0
%endif
# Sign modules on all arches
%global signmodules 1
%if 0%{?centos_hs}
# We cannot do signing for secure boot yet...
# Cf. https://pagure.io/centos-infra/issue/307
# Cf. https://git.centos.org/centos/board/issue/67
%global signkernel 0
%global signmodules 0
%endif
# Compress modules only for architectures that build modules
%ifarch noarch
%global zipmodules 0
%else
%global zipmodules 1
%endif
%if %{zipmodules}
%global zipsed -e 's/\.ko$/\.ko.xz/'
# for parallel xz processes, replace with 1 to go back to single process
%global zcpu `nproc --all`
%endif
# define buildid .local
%if 0%{?fedora}
%define primary_target fedora
%else
%define primary_target rhel
%endif
# The kernel tarball/base version
%define kversion 5.14
%define rpmversion 5.14.0
%define pkgrelease 29.hs1.el9
# This is needed to do merge window version magic
%define patchlevel 14
# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 29.hs1%{?buildid}%{?dist}
%define pkg_release %{specrelease}
# libexec dir is not used by the linker, so the shared object there
# should not be exported to RPM provides
%global __provides_exclude_from ^%{_libexecdir}/kselftests
# The following build options are enabled by default, but may become disabled
# by later architecture-specific checks. These can also be disabled by using
# --without <opt> in the rpmbuild command, or by forcing these values to 0.
#
# standard kernel
%define with_up %{?_without_up: 0} %{?!_without_up: 1}
# kernel PAE (only valid for ARM (lpae))
%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
# kernel-debug
%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
# kernel-zfcpdump (s390 specific kernel for zfcpdump)
%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
# kernel-doc
%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
# kernel-headers
%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
# perf
%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
# tools
%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
# bpf tool
%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
# kernel-debuginfo
%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
# kernel-abi-stablelists
%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
# internal samples and selftests
%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
#
# Additional options for user-friendly one-off kernel building:
#
# Only build the base kernel (--with baseonly):
%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
# Only build the pae kernel (--with paeonly):
%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
# Only build the debug kernel (--with dbgonly):
%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
# Control whether we perform a compat. check against published ABI.
%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
# Temporarily disable kabi checks until RC.
%define with_kabichk 0
# Control whether we perform a compat. check against DUP ABI.
%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
#
# Control whether to run an extensive DWARF based kABI check.
# Note that this option needs to have baseline setup in SOURCE300.
%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
#
# Control whether to install the vdso directories.
%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
#
# should we do C=1 builds with sparse
%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
#
# Cross compile requested?
%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
#
# build a release kernel on rawhide
%define with_release %{?_with_release: 1} %{?!_with_release: 0}
# verbose build, i.e. no silent rules and V=1
%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
#
# check for mismatched config options
%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
#
# gcov support
%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
#
# ipa_clone support
%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
# Want to build a vanilla kernel build without any non-upstream patches?
%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
%if 0%{?fedora}
# Kernel headers are being split out into a separate package
%define with_headers 0
%define with_cross_headers 0
# no ipa_clone for now
%define with_ipaclones 0
# no stablelist
%define with_kernel_abi_stablelists 0
# Fedora builds these separately
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
# selftests turns on bpftool
%define with_selftests 0
%endif
%if %{with_verbose}
%define make_opts V=1
%else
%define make_opts -s
%endif
%if %{with toolchain_clang}
%global clang_make_opts HOSTCC=clang CC=clang
%if %{with clang_lto}
%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm LLVM_IAS=1
%endif
%global make_opts %{make_opts} %{clang_make_opts}
# clang does not support the -fdump-ipa-clones option
%global with_ipaclones 0
%endif
# turn off debug kernel and kabichk for gcov builds
%if %{with_gcov}
%define with_debug 0
%define with_kabichk 0
%define with_kabidupchk 0
%define with_kabidwchk 0
%define with_kabidw_base 0
%define with_kernel_abi_stablelists 0
%endif
# turn off kABI DWARF-based check if we're generating the base dataset
%if %{with_kabidw_base}
%define with_kabidwchk 0
%endif
# kpatch_kcflags are extra compiler flags applied to base kernel
# -fdump-ipa-clones is enabled only for base kernels on selected arches
%if %{with_ipaclones}
%ifarch x86_64 ppc64le
%define kpatch_kcflags -fdump-ipa-clones
%else
%define with_ipaclones 0
%endif
%endif
%define make_target bzImage
%define image_install_path boot
%define KVERREL %{version}-%{release}.%{_target_cpu}
%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
%define hdrarch %_target_cpu
%define asmarch %_target_cpu
%if 0%{!?nopatches:1}
%define nopatches 0
%endif
%if %{with_vanilla}
%define nopatches 1
%endif
%if %{with_release}
%define debugbuildsenabled 1
%endif
%if !%{with_debuginfo}
%define _enable_debug_packages 0
%endif
%define debuginfodir /usr/lib/debug
# Needed because we override almost everything involving build-ids
# and debuginfo generation. Currently we rely on the old alldebug setting.
%global _build_id_links alldebug
# kernel PAE is only built on ARMv7
%ifnarch armv7hl
%define with_pae 0
%endif
# if requested, only build base kernel
%if %{with_baseonly}
%define with_pae 0
%define with_debug 0
%define with_vdso_install 0
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%define with_kernel_abi_stablelists 0
%define with_selftests 0
%define with_cross 0
%define with_cross_headers 0
%define with_ipaclones 0
%endif
# if requested, only build pae kernel
%if %{with_paeonly}
%define with_up 0
%define with_debug 0
%endif
# if requested, only build debug kernel
%if %{with_dbgonly}
%define with_up 0
%define with_vdso_install 0
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%define with_kernel_abi_stablelists 0
%define with_selftests 0
%define with_cross 0
%define with_cross_headers 0
%define with_ipaclones 0
%endif
# turn off kABI DUP check and DWARF-based check if kABI check is disabled
%if !%{with_kabichk}
%define with_kabidupchk 0
%define with_kabidwchk 0
%endif
%if %{with_vdso_install}
%define use_vdso 1
%endif
# selftests require bpftool to be built
%if %{with_selftests}
%define with_bpftool 1
%endif
%ifnarch noarch
%define with_kernel_abi_stablelists 0
%endif
# Overrides for generic default options
# only package docs noarch
%ifnarch noarch
%define with_doc 0
%define doc_build_fail true
%endif
%if 0%{?fedora}
# don't do debug builds on anything but i686 and x86_64
%ifnarch i686 x86_64
%define with_debug 0
%endif
%endif
# don't build noarch kernels or headers (duh)
%ifarch noarch
%define with_up 0
%define with_headers 0
%define with_cross_headers 0
%define with_tools 0
%define with_perf 0
%define with_bpftool 0
%define with_selftests 0
%define with_debug 0
%define all_arch_configs kernel-%{version}-*.config
%endif
# sparse blows up on ppc
%ifnarch ppc64le
%define with_sparse 0
%endif
# zfcpdump mechanism is s390 only
%ifnarch s390x
%define with_zfcpdump 0
%endif
%if 0%{?fedora}
# This is not for Fedora
%define with_zfcpdump 0
%endif
# Per-arch tweaks
%ifarch i686
%define asmarch x86
%define hdrarch i386
%define all_arch_configs kernel-%{version}-i?86*.config
%define kernel_image arch/x86/boot/bzImage
%endif
%ifarch x86_64
%define asmarch x86
%define all_arch_configs kernel-%{version}-x86_64*.config
%define kernel_image arch/x86/boot/bzImage
%endif
%ifarch ppc64le
%define asmarch powerpc
%define hdrarch powerpc
%define make_target vmlinux
%define kernel_image vmlinux
%define kernel_image_elf 1
%define use_vdso 0
%define all_arch_configs kernel-%{version}-ppc64le*.config
%endif
%ifarch s390x
%define asmarch s390
%define hdrarch s390
%define all_arch_configs kernel-%{version}-s390x.config
%define kernel_image arch/s390/boot/bzImage
%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
%endif
%ifarch %{arm}
%define all_arch_configs kernel-%{version}-arm*.config
%define skip_nonpae_vdso 1
%define asmarch arm
%define hdrarch arm
%define make_target bzImage
%define kernel_image arch/arm/boot/zImage
# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
%define kernel_mflags KALLSYMS_EXTRA_PASS=1
# we only build headers/perf/tools on the base arm arches
# just like we used to only build them on i386 for x86
%ifnarch armv7hl
%define with_headers 0
%define with_cross_headers 0
%endif
# These currently don't compile on armv7
%define with_selftests 0
%endif
%ifarch aarch64
%define all_arch_configs kernel-%{version}-aarch64*.config
%define asmarch arm64
%define hdrarch arm64
%define make_target Image.gz
%define kernel_image arch/arm64/boot/Image.gz
%endif
# Should make listnewconfig fail if there's config options
# printed out?
%if %{nopatches}
%define with_configchecks 0
%endif
# To temporarily exclude an architecture from being built, add it to
# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
# don't build kernel-headers then the new build system will no longer let
# us use the previous build of that package -- it'll just be completely AWOL.
# Which is a BadThing(tm).
# We only build kernel-headers on the following...
%if 0%{?fedora}
%define nobuildarches i386
%else
%define nobuildarches i386 i686 %{arm}
%endif
%ifarch %nobuildarches
# disable BuildKernel commands
%define with_up 0
%define with_debug 0
%define with_pae 0
%define with_zfcpdump 0
%define with_debuginfo 0
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%define with_selftests 0
%define _enable_debug_packages 0
%endif
# Architectures we build tools/cpupower on
%if 0%{?fedora}
%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
%else
%define cpupowerarchs i686 x86_64 ppc64le aarch64
%endif
%if 0%{?use_vdso}
%if 0%{?skip_nonpae_vdso}
%define _use_vdso 0
%else
%define _use_vdso 1
%endif
%else
%define _use_vdso 0
%endif
# If build of debug packages is disabled, we need to know if we want to create
# meta debug packages or not, after we define with_debug for all specific cases
# above. So this must be at the end here, after all cases of with_debug or not.
%define with_debug_meta 0
%if !%{debugbuildsenabled}
%if %{with_debug}
%define with_debug_meta 1
%endif
%define with_debug 0
%endif
#
# Packages that need to be installed before the kernel is, because the %%post
# scripts use them.
#
%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
%define initrd_prereq dracut >= 027
Name: kernel
License: GPLv2 and Redistributable, no modification permitted
URL: https://www.kernel.org/
Version: %{rpmversion}
Release: %{pkg_release}
# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
# SET %%nobuildarches (ABOVE) INSTEAD
%if 0%{?fedora}
ExclusiveArch: x86_64 s390x %{arm} aarch64 ppc64le
%else
ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
%endif
ExclusiveOS: Linux
%ifnarch %{nobuildarches}
Requires: kernel-core-uname-r = %{KVERREL}
Requires: kernel-modules-uname-r = %{KVERREL}
%endif
#
# List the packages used during the kernel build
#
BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
BuildRequires: net-tools, hostname, bc, elfutils-devel
BuildRequires: dwarves
BuildRequires: python3-devel
BuildRequires: gcc-plugin-devel
%ifnarch %{nobuildarches} noarch
BuildRequires: bpftool
%endif
%if %{with_headers}
BuildRequires: rsync
%endif
%if %{with_doc}
BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
%endif
%if %{with_sparse}
BuildRequires: sparse
%endif
%if %{with_perf}
BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
BuildRequires: audit-libs-devel
BuildRequires: java-devel
BuildRequires: libbpf-devel
BuildRequires: libbabeltrace-devel
BuildRequires: libtraceevent-devel
%ifnarch %{arm} s390x
BuildRequires: numactl-devel
%endif
%ifarch aarch64
BuildRequires: opencsd-devel >= 1.0.0
%endif
%endif
%if %{with_tools}
BuildRequires: gettext ncurses-devel
BuildRequires: libcap-devel libcap-ng-devel
%ifnarch s390x
BuildRequires: pciutils-devel
%endif
%endif
%if %{with_bpftool}
BuildRequires: python3-docutils
BuildRequires: zlib-devel binutils-devel
%endif
%if %{with_selftests}
BuildRequires: clang llvm
%ifnarch %{arm}
BuildRequires: numactl-devel
%endif
BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
%endif
BuildConflicts: rhbuildsys(DiskFree) < 500Mb
%if %{with_debuginfo}
BuildRequires: rpm-build, elfutils
BuildConflicts: rpm < 4.13.0.1-19
BuildConflicts: dwarves < 1.13
# Most of these should be enabled after more investigation
%undefine _include_minidebuginfo
%undefine _find_debuginfo_dwz_opts
%undefine _unique_build_ids
%undefine _unique_debug_names
%undefine _unique_debug_srcs
%undefine _debugsource_packages
%undefine _debuginfo_subpackages
%global _find_debuginfo_opts -r
%global _missing_build_ids_terminate_build 1
%global _no_recompute_build_ids 1
%endif
%if %{with_kabidwchk} || %{with_kabidw_base}
BuildRequires: kabi-dw
%endif
BuildRequires: openssl openssl-devel
%if %{signkernel}%{signmodules}
%if %{signkernel}
%ifarch x86_64 aarch64
BuildRequires: nss-tools
BuildRequires: pesign >= 0.10-4
%endif
%endif
%endif
%if %{with_cross}
BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
%define __strip %{_build_arch}-linux-gnu-strip
%endif
# These below are required to build man pages
%if %{with_perf}
BuildRequires: xmlto
%endif
%if %{with_perf} || %{with_tools}
BuildRequires: asciidoc
%endif
%if %{with toolchain_clang}
BuildRequires: clang
%endif
%if %{with clang_lto}
BuildRequires: llvm
BuildRequires: lld
%endif
# Because this is the kernel, it's hard to get a single upstream URL
# to represent the base without needing to do a bunch of patching. This
# tarball is generated from a src-git tree. If you want to see the
# exact git commit you can run
#
# xzcat -qq ${TARBALL} | git get-tar-commit-id
Source0: linux-5.14.0-29.hs1.el9.tar.xz
Source1: Makefile.rhelver
# Name of the packaged file containing signing key
%ifarch ppc64le
%define signing_key_filename kernel-signing-ppc.cer
%endif
%ifarch s390x
%define signing_key_filename kernel-signing-s390.cer
%endif
%if %{?released_kernel}
Source10: redhatsecurebootca5.cer
Source11: redhatsecurebootca3.cer
Source12: redhatsecurebootca6.cer
Source13: redhatsecureboot501.cer
Source14: redhatsecureboot302.cer
Source15: redhatsecureboot601.cer
%ifarch x86_64 aarch64
%define secureboot_ca_0 %{SOURCE10}
%define secureboot_key_0 %{SOURCE13}
%define pesign_name_0 redhatsecureboot501
%endif
%ifarch s390x
%define secureboot_ca_0 %{SOURCE11}
%define secureboot_key_0 %{SOURCE14}
%define pesign_name_0 redhatsecureboot302
%endif
%ifarch ppc64le
%define secureboot_ca_0 %{SOURCE12}
%define secureboot_key_0 %{SOURCE15}
%define pesign_name_0 redhatsecureboot601
%endif
# released_kernel
%else
Source10: redhatsecurebootca4.cer
Source11: redhatsecureboot401.cer
%define secureboot_ca_0 %{SOURCE10}
%define secureboot_key_0 %{SOURCE11}
%define pesign_name_0 redhatsecureboot401
# released_kernel
%endif
Source20: mod-denylist.sh
Source21: mod-sign.sh
Source22: parallel_xz.sh
%define modsign_cmd %{SOURCE21}
%if 0%{?include_rhel}
Source23: x509.genkey.rhel
Source24: kernel-aarch64-rhel.config
Source25: kernel-aarch64-debug-rhel.config
Source26: mod-extra.list.rhel
Source27: kernel-ppc64le-rhel.config
Source28: kernel-ppc64le-debug-rhel.config
Source29: kernel-s390x-rhel.config
Source30: kernel-s390x-debug-rhel.config
Source31: kernel-s390x-zfcpdump-rhel.config
Source32: kernel-x86_64-rhel.config
Source33: kernel-x86_64-debug-rhel.config
Source34: filter-x86_64.sh.rhel
Source35: filter-armv7hl.sh.rhel
Source36: filter-i686.sh.rhel
Source37: filter-aarch64.sh.rhel
Source38: filter-ppc64le.sh.rhel
Source39: filter-s390x.sh.rhel
Source40: filter-modules.sh.rhel
%endif
%if 0%{?include_fedora}
Source50: x509.genkey.fedora
Source51: mod-extra.list.fedora
Source52: kernel-aarch64-fedora.config
Source53: kernel-aarch64-debug-fedora.config
Source54: kernel-armv7hl-fedora.config
Source55: kernel-armv7hl-debug-fedora.config
Source56: kernel-armv7hl-lpae-fedora.config
Source57: kernel-armv7hl-lpae-debug-fedora.config
Source58: kernel-i686-fedora.config
Source59: kernel-i686-debug-fedora.config
Source60: kernel-ppc64le-fedora.config
Source61: kernel-ppc64le-debug-fedora.config
Source62: kernel-s390x-fedora.config
Source63: kernel-s390x-debug-fedora.config
Source64: kernel-x86_64-fedora.config
Source65: kernel-x86_64-debug-fedora.config
Source67: filter-x86_64.sh.fedora
Source68: filter-armv7hl.sh.fedora
Source69: filter-i686.sh.fedora
Source70: filter-aarch64.sh.fedora
Source71: filter-ppc64le.sh.fedora
Source72: filter-s390x.sh.fedora
Source73: filter-modules.sh.fedora
%endif
Source75: partial-kgcov-snip.config
Source80: generate_all_configs.sh
Source81: process_configs.sh
Source82: update_scripts.sh
Source83: generate_crashkernel_default.sh
Source84: mod-internal.list
Source100: rheldup3.x509
Source101: rhelkpatch1.x509
Source200: check-kabi
Source201: Module.kabi_aarch64
Source202: Module.kabi_ppc64le
Source203: Module.kabi_s390x
Source204: Module.kabi_x86_64
Source210: Module.kabi_dup_aarch64
Source211: Module.kabi_dup_ppc64le
Source212: Module.kabi_dup_s390x
Source213: Module.kabi_dup_x86_64
Source300: kernel-abi-stablelists-%{rpmversion}-%{distro_build}.tar.bz2
Source301: kernel-kabi-dw-%{rpmversion}-%{distro_build}.tar.bz2
# Sources for kernel-tools
Source2000: cpupower.service
Source2001: cpupower.config
Source2002: kvm_stat.logrotate
# Some people enjoy building customized kernels from the dist-git in Fedora and
# use this to override configuration options. One day they may all use the
# source tree, but in the mean time we carry this to support the legacy workflow
Source3000: merge.pl
Source3001: kernel-local
Source4000: README.rst
Source4001: rpminspect.yaml
Source4002: gating.yaml
## Patches needed for building this package
%if !%{nopatches}
Patch1: patch-%{rpmversion}-redhat.patch
%endif
# empty final patch to facilitate testing of kernel patches
Patch999999: linux-kernel-test.patch
# END OF PATCH DEFINITIONS
%description
The kernel meta package
#
# This macro does requires, provides, conflicts, obsoletes for a kernel package.
# %%kernel_reqprovconf <subpackage>
# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
# macros defined above.
#
%define kernel_reqprovconf \
Provides: kernel = %{rpmversion}-%{pkg_release}\
Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:+%{1}}\
Provides: kernel-drm-nouveau = 16\
Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
Requires(pre): %{kernel_prereq}\
Requires(pre): %{initrd_prereq}\
Requires(pre): linux-firmware >= 20150904-56.git6ebf5d57\
Requires(preun): systemd >= 200\
Conflicts: xfsprogs < 4.3.0-1\
Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
# We can't let RPM do the dependencies automatic because it'll then pick up\
# a correct but undesirable perl dependency from the module headers which\
# isn't required for the kernel proper to function\
AutoReq: no\
AutoProv: yes\
%{nil}
%package doc
Summary: Various documentation bits found in the kernel source
Group: Documentation
%description doc
This package contains documentation files from the kernel
source. Various bits of information about the Linux kernel and the
device drivers shipped with it are documented in these files.
You'll want to install this package if you need a reference to the
options that can be passed to Linux kernel modules at load time.
%package headers
Summary: Header files for the Linux kernel for use by glibc
Obsoletes: glibc-kernheaders < 3.0-46
Provides: glibc-kernheaders = 3.0-46
%description headers
Kernel-headers includes the C header files that specify the interface
between the Linux kernel and userspace libraries and programs. The
header files define structures and constants that are needed for
building most standard programs and are also needed for rebuilding the
glibc package.
%package cross-headers
Summary: Header files for the Linux kernel for use by cross-glibc
%description cross-headers
Kernel-cross-headers includes the C header files that specify the interface
between the Linux kernel and userspace libraries and programs. The
header files define structures and constants that are needed for
building most standard programs and are also needed for rebuilding the
cross-glibc package.
%package debuginfo-common-%{_target_cpu}
Summary: Kernel source files used by %{name}-debuginfo packages
Provides: installonlypkg(kernel)
%description debuginfo-common-%{_target_cpu}
This package is required by %{name}-debuginfo subpackages.
It provides the kernel source files common to all builds.
%if %{with_perf}
%package -n perf
Summary: Performance monitoring for the Linux kernel
Requires: bzip2
License: GPLv2
%description -n perf
This package contains the perf tool, which enables performance monitoring
of the Linux kernel.
%package -n perf-debuginfo
Summary: Debug information for package perf
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n perf-debuginfo
This package provides debug information for the perf package.
# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
%package -n python3-perf
Summary: Python bindings for apps which will manipulate perf events
%description -n python3-perf
The python3-perf package contains a module that permits applications
written in the Python programming language to use the interface
to manipulate perf events.
%package -n python3-perf-debuginfo
Summary: Debug information for package perf python bindings
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n python3-perf-debuginfo
This package provides debug information for the perf python bindings.
# the python_sitearch macro should already be defined from above
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
# with_perf
%endif
%if %{with_tools}
%package -n kernel-tools
Summary: Assortment of tools for the Linux kernel
License: GPLv2
%ifarch %{cpupowerarchs}
Provides: cpupowerutils = 1:009-0.6.p1
Obsoletes: cpupowerutils < 1:009-0.6.p1
Provides: cpufreq-utils = 1:009-0.6.p1
Provides: cpufrequtils = 1:009-0.6.p1
Obsoletes: cpufreq-utils < 1:009-0.6.p1
Obsoletes: cpufrequtils < 1:009-0.6.p1
Obsoletes: cpuspeed < 1:1.5-16
Requires: kernel-tools-libs = %{version}-%{release}
%endif
%define __requires_exclude ^%{_bindir}/python
%description -n kernel-tools
This package contains the tools/ directory from the kernel source
and the supporting documentation.
%package -n kernel-tools-libs
Summary: Libraries for the kernels-tools
License: GPLv2
%description -n kernel-tools-libs
This package contains the libraries built from the tools/ directory
from the kernel source.
%package -n kernel-tools-libs-devel
Summary: Assortment of tools for the Linux kernel
License: GPLv2
Requires: kernel-tools = %{version}-%{release}
%ifarch %{cpupowerarchs}
Provides: cpupowerutils-devel = 1:009-0.6.p1
Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
%endif
Requires: kernel-tools-libs = %{version}-%{release}
Provides: kernel-tools-devel
%description -n kernel-tools-libs-devel
This package contains the development files for the tools/ directory from
the kernel source.
%package -n kernel-tools-debuginfo
Summary: Debug information for package kernel-tools
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n kernel-tools-debuginfo
This package provides debug information for package kernel-tools.
# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
# with_tools
%endif
%if %{with_bpftool}
%package -n bpftool
Summary: Inspection and simple manipulation of eBPF programs and maps
License: GPLv2
%description -n bpftool
This package contains the bpftool, which allows inspection and simple
manipulation of eBPF programs and maps.
%package -n bpftool-debuginfo
Summary: Debug information for package bpftool
Group: Development/Debug
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n bpftool-debuginfo
This package provides debug information for the bpftool package.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
# with_bpftool
%endif
%if %{with_selftests}
%package selftests-internal
Summary: Kernel samples and selftests
License: GPLv2
Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
%description selftests-internal
Kernel sample programs and selftests.
# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
# with_selftests
%endif
%if %{with_gcov}
%package gcov
Summary: gcov graph and source files for coverage data collection.
%description gcov
kernel-gcov includes the gcov graph and source files for gcov coverage collection.
%endif
%package -n kernel-abi-stablelists
Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
AutoReqProv: no
%description -n kernel-abi-stablelists
The kABI package contains information pertaining to the Red Hat Enterprise
Linux kernel ABI, including lists of kernel symbols that are needed by
external Linux kernel modules, and a yum plugin to aid enforcement.
%if %{with_kabidw_base}
%package kernel-kabidw-base-internal
Summary: The baseline dataset for kABI verification using DWARF data
Group: System Environment/Kernel
AutoReqProv: no
%description kernel-kabidw-base-internal
The package contains data describing the current ABI of the Red Hat Enterprise
Linux kernel, suitable for the kabi-dw tool.
%endif
#
# This macro creates a kernel-<subpackage>-debuginfo package.
# %%kernel_debuginfo_package <subpackage>
#
# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
# pae etc.) so the regex filters those kernels appropriately. We also
# have to package several binaries as part of kernel-devel but getting
# unique build-ids is tricky for these userspace binaries. We don't really
# care about debugging those so we just filter those out and remove it.
%define kernel_debuginfo_package() \
%package %{?1:%{1}-}debuginfo\
Summary: Debug information for package %{name}%{?1:-%{1}}\
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
Provides: installonlypkg(kernel)\
AutoReqProv: no\
%description %{?1:%{1}-}debuginfo\
This package provides debug information for package %{name}%{?1:-%{1}}.\
This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
%{nil}
#
# This macro creates a kernel-<subpackage>-devel package.
# %%kernel_devel_package [-m] <subpackage> <pretty-name>
#
%define kernel_devel_package(m) \
%package %{?1:%{1}-}devel\
Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
Provides: installonlypkg(kernel)\
AutoReqProv: no\
Requires(pre): findutils\
Requires: findutils\
Requires: perl-interpreter\
Requires: openssl-devel\
Requires: elfutils-libelf-devel\
Requires: bison\
Requires: flex\
Requires: make\
Requires: gcc\
%if %{-m:1}%{!-m:0}\
Requires: kernel-devel-uname-r = %{KVERREL}\
%endif\
%description %{?1:%{1}-}devel\
This package provides kernel headers and makefiles sufficient to build modules\
against the %{?2:%{2} }kernel package.\
%{nil}
#
# This macro creates an empty kernel-<subpackage>-devel-matched package that
# requires both the core and devel packages locked on the same version.
# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
#
%define kernel_devel_matched_package(m) \
%package %{?1:%{1}-}devel-matched\
Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
%description %{?1:%{1}-}devel-matched\
This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
%{nil}
#
# kernel-<variant>-ipaclones-internal package
#
%define kernel_ipaclones_package() \
%package %{?1:%{1}-}ipaclones-internal\
Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
Group: System Environment/Kernel\
AutoReqProv: no\
%description %{?1:%{1}-}ipaclones-internal\
This package provides *.ipa-clones files.\
%{nil}
#
# This macro creates a kernel-<subpackage>-modules-internal package.
# %%kernel_modules_internal_package <subpackage> <pretty-name>
#
%define kernel_modules_internal_package() \
%package %{?1:%{1}-}modules-internal\
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
Group: System Environment/Kernel\
Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules-internal\
This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
%{nil}
#
# This macro creates a kernel-<subpackage>-modules-extra package.
# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
#
%define kernel_modules_extra_package(m) \
%package %{?1:%{1}-}modules-extra\
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
%if %{-m:1}%{!-m:0}\
Requires: kernel-modules-extra-uname-r = %{KVERREL}\
%endif\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules-extra\
This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
%{nil}
#
# This macro creates a kernel-<subpackage>-modules package.
# %%kernel_modules_package [-m] <subpackage> <pretty-name>
#
%define kernel_modules_package(m) \
%package %{?1:%{1}-}modules\
Summary: kernel modules to match the %{?2:%{2}-}core kernel\
Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
%if %{-m:1}%{!-m:0}\
Requires: kernel-modules-uname-r = %{KVERREL}\
%endif\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules\
This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
%{nil}
#
# this macro creates a kernel-<subpackage> meta package.
# %%kernel_meta_package <subpackage>
#
%define kernel_meta_package() \
%package %{1}\
summary: kernel meta-package for the %{1} kernel\
Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
Provides: installonlypkg(kernel)\
%description %{1}\
The meta-package for the %{1} kernel\
%{nil}
#
# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
# %%define variant_summary The Linux kernel compiled for <configuration>
# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
#
%define kernel_variant_package(n:m) \
%package %{?1:%{1}-}core\
Summary: %{variant_summary}\
Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
Provides: installonlypkg(kernel)\
%if %{-m:1}%{!-m:0}\
Requires: kernel-core-uname-r = %{KVERREL}\
%endif\
%{expand:%%kernel_reqprovconf}\
%if %{?1:1} %{!?1:0} \
%{expand:%%kernel_meta_package %{?1:%{1}}}\
%endif\
%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%if %{-m:0}%{!-m:1}\
%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
%endif\
%{nil}
# Now, each variant package.
%if %{with_pae}
%define variant_summary The Linux kernel compiled for Cortex-A15
%kernel_variant_package lpae
%description lpae-core
This package includes a version of the Linux kernel with support for
Cortex-A15 devices with LPAE and HW virtualisation support
%endif
%if %{with_zfcpdump}
%define variant_summary The Linux kernel compiled for zfcpdump usage
%kernel_variant_package zfcpdump
%description zfcpdump-core
The kernel package contains the Linux kernel (vmlinuz) for use by the
zfcpdump infrastructure.
# with_zfcpdump
%endif
%define variant_summary The Linux kernel compiled with extra debugging enabled
%if !%{debugbuildsenabled}
%kernel_variant_package -m debug
%else
%kernel_variant_package debug
%endif
%description debug-core
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system. The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.
This variant of the kernel has numerous debugging options enabled.
It should only be installed when trying to gather additional information
on kernel bugs, as some of these options impact performance noticably.
# And finally the main -core package
%define variant_summary The Linux kernel
%kernel_variant_package
%description core
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system. The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.
%if %{with_ipaclones}
%kernel_ipaclones_package
%endif
%prep
# do a few sanity-checks for --with *only builds
%if %{with_baseonly}
%if !%{with_up}
echo "Cannot build --with baseonly, up build is disabled"
exit 1
%endif
%endif
# more sanity checking; do it quietly
if [ "%{patches}" != "%%{patches}" ] ; then
for patch in %{patches} ; do
if [ ! -f $patch ] ; then
echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
exit 1
fi
done
fi 2>/dev/null
patch_command='patch -p1 -F1 -s'
ApplyPatch()
{
local patch=$1
shift
if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
exit 1
fi
if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
if [ "${patch:0:8}" != "patch-5." ] ; then
echo "ERROR: Patch $patch not listed as a source patch in specfile"
exit 1
fi
fi 2>/dev/null
case "$patch" in
*.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
*.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
*.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
*) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
esac
}
# don't apply patch if it's empty
ApplyOptionalPatch()
{
local patch=$1
shift
if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
exit 1
fi
local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
if [ "$C" -gt 9 ]; then
ApplyPatch $patch ${1+"$@"}
fi
}
%setup -q -n kernel-5.14.0-29.hs1.el9 -c
mv linux-5.14.0-29.hs1.el9 linux-%{KVERREL}
cd linux-%{KVERREL}
cp -a %{SOURCE1} .
%if !%{nopatches}
ApplyOptionalPatch patch-%{rpmversion}-redhat.patch
%endif
ApplyOptionalPatch linux-kernel-test.patch
# END OF PATCH APPLICATIONS
# Any further pre-build tree manipulations happen here.
chmod +x scripts/checkpatch.pl
mv COPYING COPYING-%{version}-%{release}
# This Prevents scripts/setlocalversion from mucking with our version numbers.
touch .scmversion
# Mangle /usr/bin/python shebangs to /usr/bin/python3
# Mangle all Python shebangs to be Python 3 explicitly
# -p preserves timestamps
# -n prevents creating ~backup files
# -i specifies the interpreter for the shebang
# This fixes errors such as
# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
# We patch all sources below for which we got a report/error.
pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
tools/kvm/kvm_stat/kvm_stat \
scripts/show_delta \
scripts/diffconfig \
scripts/bloat-o-meter \
scripts/jobserver-exec \
tools \
Documentation \
scripts/clang-tools
# only deal with configs if we are going to build for the arch
%ifnarch %nobuildarches
if [ -L configs ]; then
rm -f configs
fi
mkdir configs
cd configs
# Drop some necessary files from the source dir into the buildroot
cp $RPM_SOURCE_DIR/kernel-*.config .
cp %{SOURCE80} .
# merge.pl
cp %{SOURCE3000} .
# kernel-local
cp %{SOURCE3001} .
VERSION=%{version} ./generate_all_configs.sh %{primary_target} %{debugbuildsenabled}
# Merge in any user-provided local config option changes
%ifnarch %nobuildarches
for i in %{all_arch_configs}
do
mv $i $i.tmp
./merge.pl %{SOURCE3001} $i.tmp > $i
%if %{with_gcov}
echo "Merging with gcov options"
cat %{SOURCE75}
mv $i $i.tmp
./merge.pl %{SOURCE75} $i.tmp > $i
%endif
rm $i.tmp
done
%endif
%if %{with clang_lto}
for i in *aarch64*.config *x86_64*.config; do
sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
done
%endif
# Add DUP and kpatch certificates to system trusted keys for RHEL
%if 0%{?rhel}
%if %{signkernel}%{signmodules}
openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
%ifarch s390x ppc64le
openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
cat secureboot.pem >> ../certs/rhel.pem
%endif
for i in *.config; do
sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
done
%endif
%endif
cp %{SOURCE81} .
OPTS=""
%if %{with_configchecks}
OPTS="$OPTS -w -n -c"
%endif
%if %{with clang_lto}
for opt in %{clang_make_opts}; do
OPTS="$OPTS -m $opt"
done
%endif
./process_configs.sh $OPTS kernel %{rpmversion}
cp %{SOURCE82} .
RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
# end of kernel config
%endif
cd ..
# # End of Configs stuff
# get rid of unwanted files resulting from patch fuzz
find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
# remove unnecessary SCM files
find . -name .gitignore -delete >/dev/null
cd ..
###
### build
###
%build
%if %{with_sparse}
%define sparse_mflags C=1
%endif
cp_vmlinux()
{
eu-strip --remove-comment -o "$2" "$1"
}
# Note we need to disable these flags for cross builds because the flags
# from redhat-rpm-config assume that host == target so target arch
# flags cause issues with the host compiler.
%if !%{with_cross}
%define build_hostcflags %{?build_cflags}
%define build_hostldflags %{?build_ldflags}
%endif
%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
InitBuildVars() {
# Initialize the kernel .config file and create some variables that are
# needed for the actual build process.
Variant=$1
# Pick the right kernel config file
Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
# make sure EXTRAVERSION says what we want it to say
# Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
# if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
# if we are post rc1 this should match anyway so this won't matter
perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
%{make} %{?_smp_mflags} mrproper
cp configs/$Config .config
%if %{signkernel}%{signmodules}
cp $RPM_SOURCE_DIR/x509.genkey certs/.
%endif
Arch=`head -1 .config | cut -b 3-`
echo USING ARCH=$Arch
KCFLAGS="%{?kcflags}"
# add kpatch flags for base kernel
if [ "$Variant" == "" ]; then
KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
fi
}
BuildKernel() {
MakeTarget=$1
KernelImage=$2
DoVDSO=$3
Variant=$4
InstallName=${5:-vmlinuz}
DoModules=1
if [ "$Variant" = "zfcpdump" ]; then
DoModules=0
fi
# When the bootable image is just the ELF kernel, strip it.
# We already copy the unstripped file into the debuginfo package.
if [ "$KernelImage" = vmlinux ]; then
CopyKernel=cp_vmlinux
else
CopyKernel=cp
fi
InitBuildVars $Variant
echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
%{make} ARCH=$Arch olddefconfig >/dev/null
# This ensures build-ids are unique to allow parallel debuginfo
perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
%{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
if [ $DoModules -eq 1 ]; then
%{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
fi
mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
%if %{with_debuginfo}
mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
%endif
%ifarch %{arm} aarch64
%{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
%{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
%endif
# Start installing the results
install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
# We estimate the size of the initramfs because rpm needs to take this size
# into consideration when performing disk space calculations. (See bz #530778)
dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
if [ -f arch/$Arch/boot/zImage.stub ]; then
cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
fi
%if %{signkernel}
if [ "$KernelImage" = vmlinux ]; then
# We can't strip and sign $KernelImage in place, because
# we need to preserve original vmlinux for debuginfo.
# Use a copy for signing.
$CopyKernel $KernelImage $KernelImage.tosign
KernelImage=$KernelImage.tosign
CopyKernel=cp
fi
# Sign the image if we're using EFI
# aarch64 kernels are gziped EFI images
KernelExtension=${KernelImage##*.}
if [ "$KernelExtension" == "gz" ]; then
SignImage=${KernelImage%.*}
else
SignImage=$KernelImage
fi
%ifarch x86_64 aarch64
%pesign -s -i $SignImage -o vmlinuz.signed -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
%endif
%ifarch s390x ppc64le
if [ -x /usr/bin/rpm-sign ]; then
rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
elif [ $DoModules -eq 1 ]; then
chmod +x scripts/sign-file
./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
else
mv $SignImage vmlinuz.signed
fi
%endif
if [ ! -s vmlinuz.signed ]; then
echo "pesigning failed"
exit 1
fi
mv vmlinuz.signed $SignImage
if [ "$KernelExtension" == "gz" ]; then
gzip -f9 $SignImage
fi
# signkernel
%endif
$CopyKernel $KernelImage \
$RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
# hmac sign the kernel for FIPS
echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
sha512hmac $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer | sed -e "s,$RPM_BUILD_ROOT,," > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
if [ $DoModules -eq 1 ]; then
# Override $(mod-fw) because we don't want it to install any firmware
# we'll get it from the linux-firmware package and we don't want conflicts
%{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
fi
%if %{with_gcov}
# install gcov-needed files to $BUILDROOT/$BUILD/...:
# gcov_info->filename is absolute path
# gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
# sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
%endif
# add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
if [ $DoVDSO -ne 0 ]; then
%{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
if [ -s ldconfig-kernel.conf ]; then
install -D -m 444 ldconfig-kernel.conf \
$RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
fi
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
fi
# And save the headers/makefiles etc for building modules against
#
# This all looks scary, but the end result is supposed to be:
# * all arch relevant include/ files
# * all Makefile/Kconfig files
# * all script/ files
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
(cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
# dirs for additional modules per module-init-tools, kbuild/modules.txt
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
# CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
# testing so just delete
find . -name *.h.s -delete
# first copy everything
cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
if [ ! -e Module.symvers ]; then
touch Module.symvers
fi
cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
if [ -s Module.markers ]; then
cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
fi
# create the kABI metadata for use in packaging
# NOTENOTE: the name symvers is used by the rpm backend
# NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
# NOTENOTE: script which dynamically adds exported kernel symbol
# NOTENOTE: checksums to the rpm metadata provides list.
# NOTENOTE: if you change the symvers name, update the backend too
echo "**** GENERATING kernel ABI metadata ****"
gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
%if %{with_kabichk}
echo "**** kABI checking is enabled in kernel SPEC file. ****"
chmod 0755 $RPM_SOURCE_DIR/check-kabi
if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
$RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
# for now, don't keep it around.
rm $RPM_BUILD_ROOT/Module.kabi
else
echo "**** NOTE: Cannot find reference Module.kabi file. ****"
fi
%endif
%if %{with_kabidupchk}
echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
$RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
# for now, don't keep it around.
rm $RPM_BUILD_ROOT/Module.kabi
else
echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
fi
%endif
%if %{with_kabidw_base}
# Don't build kabi base for debug kernels
if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
echo "**** GENERATING DWARF-based kABI baseline dataset ****"
chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
$RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
"$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
"$(pwd)" \
"$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
rm -rf $RPM_BUILD_ROOT/kabi-dwarf
fi
%endif
%if %{with_kabidwchk}
if [ "$Variant" != "zfcpdump" ]; then
mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
echo "**** GENERATING DWARF-based kABI dataset ****"
chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
$RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
"$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
"$(pwd)" \
"$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
echo "**** kABI DWARF-based comparison report ****"
$RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
"$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
"$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
echo "**** End of kABI DWARF-based comparison report ****"
else
echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
fi
rm -rf $RPM_BUILD_ROOT/kabi-dwarf
fi
%endif
# then drop all but the needed Makefiles/Kconfig files
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
# Files for 'make scripts' to succeed with kernel-devel.
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
# Files for 'make prepare' to succeed with kernel-devel.
cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
if [ -f tools/objtool/objtool ]; then
cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
fi
if [ -f tools/objtool/fixdep ]; then
cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
fi
if [ -d arch/$Arch/scripts ]; then
cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
fi
if [ -f arch/$Arch/*lds ]; then
cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
fi
if [ -f arch/%{asmarch}/kernel/module.lds ]; then
cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
fi
find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
%ifarch ppc64le
cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
if [ -d arch/%{asmarch}/include ]; then
cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
fi
%ifarch aarch64
# arch/arm64/include/asm/xen references arch/arm
cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
# arch/arm64/include/asm/opcodes.h references arch/arm
cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
# include the machine specific headers for ARM variants, if available.
%ifarch %{arm}
if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
fi
# include a few files for 'make prepare'
cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
%ifarch i686 x86_64
# files for 'make prepare' to succeed with kernel-devel
cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
%endif
# Clean up intermediate tools files
find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
# Make sure the Makefile and version.h have a matching timestamp so that
# external modules can be built
touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h
# Copy .config to include/config/auto.conf so "make prepare" is unnecessary.
cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
%if %{with_debuginfo}
eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
#
# save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
#
mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
if [ -n "%{vmlinux_decompressor}" ]; then
eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
# Without build-id the build will fail. But for s390 the build-id
# wasn't added before 5.11. In case it is missing prefer not
# packaging the debuginfo over a build failure.
if [ -s vmlinux.decompressor.id ]; then
cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
fi
fi
%endif
find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
# mark modules executable so that strip-to-file can strip them
xargs --no-run-if-empty chmod u+x < modnames
# Generate a list of modules for block and networking.
grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
collect_modules_list()
{
sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
if [ ! -z "$3" ]; then
sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
fi
}
collect_modules_list networking \
'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
collect_modules_list block \
'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
collect_modules_list drm \
'drm_open|drm_init'
collect_modules_list modesetting \
'drm_crtc_init'
# detect missing or incorrect license tags
( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
remove_depmod_files()
{
# remove files that will be auto generated by depmod at rpm -i time
pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
popd
}
remove_depmod_files
# Identify modules in the kernel-modules-extras package
%{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $RPM_SOURCE_DIR/mod-extra.list
# Identify modules in the kernel-modules-extras package
%{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
#
# Generate the kernel-core and kernel-modules files lists
#
# Copy the System.map file for depmod to use, and create a backup of the
# full module tree so we can restore it after we're done filtering
cp System.map $RPM_BUILD_ROOT/.
pushd $RPM_BUILD_ROOT
mkdir restore
cp -r lib/modules/$KernelVer/* restore/.
# don't include anything going into kernel-modules-extra in the file lists
xargs rm -rf < mod-extra.list
# don't include anything going int kernel-modules-internal in the file lists
xargs rm -rf < mod-internal.list
if [ $DoModules -eq 1 ]; then
# Find all the module files and filter them out into the core and
# modules lists. This actually removes anything going into -modules
# from the dir.
find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
cp $RPM_SOURCE_DIR/filter-*.sh .
./filter-modules.sh modules.list %{_target_cpu}
rm filter-*.sh
# Run depmod on the resulting module tree and make sure it isn't broken
depmod -b . -aeF ./System.map $KernelVer &> depmod.out
if [ -s depmod.out ]; then
echo "Depmod failure"
cat depmod.out
exit 1
else
rm depmod.out
fi
else
# Ensure important files/directories exist to let the packaging succeed
echo '%%defattr(-,-,-)' > modules.list
echo '%%defattr(-,-,-)' > k-d.list
mkdir -p lib/modules/$KernelVer/kernel
# Add files usually created by make modules, needed to prevent errors
# thrown by depmod during package installation
touch lib/modules/$KernelVer/modules.order
touch lib/modules/$KernelVer/modules.builtin
fi
remove_depmod_files
# Go back and find all of the various directories in the tree. We use this
# for the dir lists in kernel-core
find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
# Cleanup
rm System.map
cp -r restore/* lib/modules/$KernelVer/.
rm -rf restore
popd
# Make sure the files lists start with absolute paths or rpmbuild fails.
# Also add in the dir entries
sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
# Cleanup
rm -f $RPM_BUILD_ROOT/k-d.list
rm -f $RPM_BUILD_ROOT/modules.list
rm -f $RPM_BUILD_ROOT/module-dirs.list
rm -f $RPM_BUILD_ROOT/mod-extra.list
rm -f $RPM_BUILD_ROOT/mod-internal.list
%if %{signmodules}
if [ $DoModules -eq 1 ]; then
# Save the signing keys so we can sign the modules in __modsign_install_post
cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
fi
%endif
# Move the devel headers out of the root file system
mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
# This is going to create a broken link during the build, but we don't use
# it after this point. We need the link to actually point to something
# when kernel-devel is installed, and a relative link doesn't work across
# the F17 UsrMove feature.
ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
%ifnarch armv7hl
# Generate vmlinux.h and put it to kernel-devel path
bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
%endif
# prune junk from kernel-devel
find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
# Generate crashkernel default config
%{SOURCE83} "$KernelVer" "$Arch" "$RPM_BUILD_ROOT"
# Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
%ifarch s390x ppc64le
if [ $DoModules -eq 1 ]; then
if [ -x /usr/bin/rpm-sign ]; then
install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
else
install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
fi
fi
%endif
%if %{with_ipaclones}
MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
if [ -z "$MAXPROCS" ]; then
MAXPROCS=1
fi
if [ "$Variant" == "" ]; then
mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
fi
%endif
}
###
# DO it...
###
# prepare directories
rm -rf $RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT/boot
mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
cd linux-%{KVERREL}
%if %{with_debug}
BuildKernel %make_target %kernel_image %{_use_vdso} debug
%endif
%if %{with_zfcpdump}
BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
%endif
%if %{with_pae}
BuildKernel %make_target %kernel_image %{use_vdso} lpae
%endif
%if %{with_up}
BuildKernel %make_target %kernel_image %{_use_vdso}
%endif
%ifnarch noarch i686
%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
# If only building the user space tools, then initialize the build environment
# and some variables so that the various userspace tools can be built.
InitBuildVars
%endif
%endif
%ifarch aarch64
%global perf_build_extra_opts CORESIGHT=1
%endif
%global perf_make \
%{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags} -Wl,-E" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
%if %{with_perf}
# perf
# make sure check-headers.sh is executable
chmod +x tools/perf/check-headers.sh
%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
%endif
%global tools_make \
%{make} CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?make_opts}
%if %{with_tools}
%ifarch %{cpupowerarchs}
# cpupower
# make sure version-gen.sh is executable.
chmod +x tools/power/cpupower/utils/version-gen.sh
%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
%ifarch x86_64
pushd tools/power/cpupower/debug/x86_64
%{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
popd
%endif
%ifarch x86_64
pushd tools/power/x86/x86_energy_perf_policy/
%{tools_make}
popd
pushd tools/power/x86/turbostat
%{tools_make}
popd
pushd tools/power/x86/intel-speed-select
%{make}
popd
%endif
%endif
pushd tools/thermal/tmon/
%{tools_make}
popd
pushd tools/iio/
%{tools_make}
popd
pushd tools/gpio/
%{tools_make}
popd
# build VM tools
pushd tools/vm/
%{tools_make} slabinfo page_owner_sort
popd
%endif
if [ -f $DevelDir/vmlinux.h ]; then
RPM_VMLINUX_H=$DevelDir/vmlinux.h
fi
%global bpftool_make \
%{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
%if %{with_bpftool}
pushd tools/bpf/bpftool
%{bpftool_make}
popd
%endif
%if %{with_selftests}
# Unfortunately, samples/bpf/Makefile expects that the headers are installed
# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
# but there's no way to tell the Makefile to take them from there.
%{make} %{?_smp_mflags} headers_install
%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/
# Prevent bpf selftests to build bpftool repeatedly:
export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
pushd tools/testing/selftests
# We need to install here because we need to call make with ARCH set which
# doesn't seem possible to do in the install section.
%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" FORCE_TARGETS=1 INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
# 'make install' for bpf is broken and upstream refuses to fix it.
# Install the needed files manually.
for dir in bpf bpf/no_alu32 bpf/progs; do
# In ARK, the rpm build continues even if some of the selftests
# cannot be built. It's not always possible to build selftests,
# as upstream sometimes dependens on too new llvm version or has
# other issues. If something did not get built, just skip it.
test -d $dir || continue
mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
-name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
-name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
done
popd
export -n BPFTOOL
%endif
%if %{with_doc}
# Make the HTML pages.
%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
# sometimes non-world-readable files sneak into the kernel source tree
chmod -R a=rX Documentation
find Documentation -type d | xargs chmod u+w
%endif
# In the modsign case, we do 3 things. 1) We check the "variant" and hard
# code the value in the following invocations. This is somewhat sub-optimal
# but we're doing this inside of an RPM macro and it isn't as easy as it
# could be because of that. 2) We restore the .tmp_versions/ directory from
# the one we saved off in BuildKernel above. This is to make sure we're
# signing the modules we actually built/installed in that variant. 3) We
# grab the arch and invoke mod-sign.sh command to actually sign the modules.
#
# We have to do all of those things _after_ find-debuginfo runs, otherwise
# that will strip the signature off of the modules.
#
# Don't sign modules for the zfcpdump variant as it is monolithic.
%define __modsign_install_post \
if [ "%{signmodules}" -eq "1" ]; then \
if [ "%{with_pae}" -ne "0" ]; then \
%{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
fi \
if [ "%{with_debug}" -ne "0" ]; then \
%{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
fi \
if [ "%{with_up}" -ne "0" ]; then \
%{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
fi \
fi \
if [ "%{zipmodules}" -eq "1" ]; then \
find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P%{zcpu} xz; \
fi \
%{nil}
###
### Special hacks for debuginfo subpackages.
###
# This macro is used by %%install, so we must redefine it before that.
%define debug_package %{nil}
%if %{with_debuginfo}
%ifnarch noarch
%global __debug_package 1
%files -f debugfiles.list debuginfo-common-%{_target_cpu}
%endif
%endif
# We don't want to package debuginfo for self-tests and samples but
# we have to delete them to avoid an error messages about unpackaged
# files.
# Delete the debuginfo for kernel-devel files
%define __remove_unwanted_dbginfo_install_post \
if [ "%{with_selftests}" -ne "0" ]; then \
rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
fi \
rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
%{nil}
#
# Disgusting hack alert! We need to ensure we sign modules *after* all
# invocations of strip occur, which is in __debug_install_post if
# find-debuginfo.sh runs, and __os_install_post if not.
#
%define __spec_install_post \
%{?__debug_package:%{__debug_install_post}}\
%{__arch_install_post}\
%{__os_install_post}\
%{__remove_unwanted_dbginfo_install_post}\
%{__modsign_install_post}
###
### install
###
%install
cd linux-%{KVERREL}
%if %{with_doc}
docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{rpmversion}-%{pkgrelease}
# copy the source over
mkdir -p $docdir
tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
# with_doc
%endif
# We have to do the headers install before the tools install because the
# kernel headers_install will remove any header files in /usr/include that
# it doesn't install itself.
%if %{with_headers}
# Install kernel headers
%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
find $RPM_BUILD_ROOT/usr/include \
\( -name .install -o -name .check -o \
-name ..install.cmd -o -name ..check.cmd \) -delete
%endif
%if %{with_cross_headers}
%if 0%{?fedora}
HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
%else
HDR_ARCH_LIST='arm64 powerpc s390 x86'
%endif
mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
for arch in $HDR_ARCH_LIST; do
mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
%{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
done
find $RPM_BUILD_ROOT/usr/tmp-headers \
\( -name .install -o -name .check -o \
-name ..install.cmd -o -name ..check.cmd \) -delete
# Copy all the architectures we care about to their respective asm directories
for arch in $HDR_ARCH_LIST ; do
mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
done
rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
%endif
%if %{with_kernel_abi_stablelists}
# kabi directory
INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
mkdir -p $INSTALL_KABI_PATH
# install kabi releases directories
tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
# with_kernel_abi_stablelists
%endif
%if %{with_perf}
# perf tool binary and supporting scripts/binaries
%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
# remove the 'trace' symlink.
rm -f %{buildroot}%{_bindir}/trace
# For both of the below, yes, this should be using a macro but right now
# it's hard coded and we don't actually want it anyway right now.
# Whoever wants examples can fix it up!
# remove examples
rm -rf %{buildroot}/usr/lib/perf/examples
rm -rf %{buildroot}/usr/lib/perf/include
# python-perf extension
%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
# perf man pages (note: implicit rpm magic compresses them later)
mkdir -p %{buildroot}/%{_mandir}/man1
%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
# remove any tracevent files, eg. its plugins still gets built and installed,
# even if we build against system's libtracevent during perf build (by setting
# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
# ship with libtraceevent package.
rm -rf %{buildroot}%{_libdir}/traceevent
%endif
%if %{with_tools}
%ifarch %{cpupowerarchs}
%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
rm -f %{buildroot}%{_libdir}/*.{a,la}
%find_lang cpupower
mv cpupower.lang ../
%ifarch x86_64
pushd tools/power/cpupower/debug/x86_64
install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
popd
%endif
chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
%endif
%ifarch x86_64
mkdir -p %{buildroot}%{_mandir}/man8
pushd tools/power/x86/x86_energy_perf_policy
%{tools_make} DESTDIR=%{buildroot} install
popd
pushd tools/power/x86/turbostat
%{tools_make} DESTDIR=%{buildroot} install
popd
pushd tools/power/x86/intel-speed-select
%{tools_make} CFLAGS+="-D_GNU_SOURCE -Iinclude" DESTDIR=%{buildroot} install
popd
%endif
pushd tools/thermal/tmon
%{tools_make} INSTALL_ROOT=%{buildroot} install
popd
pushd tools/iio
%{tools_make} DESTDIR=%{buildroot} install
popd
pushd tools/gpio
%{tools_make} DESTDIR=%{buildroot} install
popd
install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
pushd tools/kvm/kvm_stat
%{__make} INSTALL_ROOT=%{buildroot} install-tools
%{__make} INSTALL_ROOT=%{buildroot} install-man
install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
popd
# install VM tools
pushd tools/vm/
install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
popd
%endif
if [ -f $DevelDir/vmlinux.h ]; then
RPM_VMLINUX_H=$DevelDir/vmlinux.h
fi
%if %{with_bpftool}
pushd tools/bpf/bpftool
%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
popd
%endif
%if %{with_selftests}
pushd samples
install -d %{buildroot}%{_libexecdir}/ksamples
# install bpf samples
pushd bpf
install -d %{buildroot}%{_libexecdir}/ksamples/bpf
find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
# kernel tree. Just remove it.
rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
popd
# install pktgen samples
pushd pktgen
install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
popd
popd
# install drivers/net/mlxsw selftests
pushd tools/testing/selftests/drivers/net/mlxsw
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
popd
# install drivers/net/netdevsim selftests
pushd tools/testing/selftests/drivers/net/netdevsim
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
popd
# install net/forwarding selftests
pushd tools/testing/selftests/net/forwarding
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
popd
# install net/mptcp selftests
pushd tools/testing/selftests/net/mptcp
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
popd
# install tc-testing selftests
pushd tools/testing/selftests/tc-testing
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
popd
# install livepatch selftests
pushd tools/testing/selftests/livepatch
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
popd
# install netfilter selftests
pushd tools/testing/selftests/netfilter
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
popd
%endif
###
### clean
###
###
### scripts
###
%if %{with_tools}
%post -n kernel-tools-libs
/sbin/ldconfig
%postun -n kernel-tools-libs
/sbin/ldconfig
%endif
#
# This macro defines a %%post script for a kernel*-devel package.
# %%kernel_devel_post [<subpackage>]
# Note we don't run hardlink if ostree is in use, as ostree is
# a far more sophisticated hardlink implementation.
# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
#
%define kernel_devel_post() \
%{expand:%%post %{?1:%{1}-}devel}\
if [ -f /etc/sysconfig/kernel ]\
then\
. /etc/sysconfig/kernel || exit $?\
fi\
if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
then\
(cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
/usr/bin/find . -type f | while read f; do\
hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
done)\
fi\
%{nil}
#
# This macro defines a %%post script for a kernel*-modules-extra package.
# It also defines a %%postun script that does the same thing.
# %%kernel_modules_extra_post [<subpackage>]
#
%define kernel_modules_extra_post() \
%{expand:%%post %{?1:%{1}-}modules-extra}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules-extra}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}
#
# This macro defines a %%post script for a kernel*-modules-internal package.
# It also defines a %%postun script that does the same thing.
# %%kernel_modules_internal_post [<subpackage>]
#
%define kernel_modules_internal_post() \
%{expand:%%post %{?1:%{1}-}modules-internal}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules-internal}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}
#
# This macro defines a %%post script for a kernel*-modules package.
# It also defines a %%postun script that does the same thing.
# %%kernel_modules_post [<subpackage>]
#
%define kernel_modules_post() \
%{expand:%%post %{?1:%{1}-}modules}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}
# This macro defines a %%posttrans script for a kernel package.
# %%kernel_variant_posttrans [<subpackage>]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_posttrans() \
%{expand:%%posttrans %{?1:%{1}-}core}\
%if 0%{!?fedora:1}\
if [ -x %{_sbindir}/weak-modules ]\
then\
%{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
fi\
%endif\
/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
%{nil}
#
# This macro defines a %%post script for a kernel package and its devel package.
# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_post(v:r:) \
%{expand:%%kernel_devel_post %{?-v*}}\
%{expand:%%kernel_modules_post %{?-v*}}\
%{expand:%%kernel_modules_extra_post %{?-v*}}\
%{expand:%%kernel_modules_internal_post %{?-v*}}\
%{expand:%%kernel_variant_posttrans %{?-v*}}\
%{expand:%%post %{?-v*:%{-v*}-}core}\
%{-r:\
if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
[ -f /etc/sysconfig/kernel ]; then\
/bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
fi}\
%{nil}
#
# This macro defines a %%preun script for a kernel package.
# %%kernel_variant_preun <subpackage>
#
%define kernel_variant_preun() \
%{expand:%%preun %{?1:%{1}-}core}\
/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
if [ -x %{_sbindir}/weak-modules ]\
then\
%{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
fi\
%{nil}
%kernel_variant_preun
%kernel_variant_post -r kernel-smp
%if %{with_pae}
%kernel_variant_preun lpae
%kernel_variant_post -v lpae -r (kernel|kernel-smp)
%endif
%if %{with_debug}
%kernel_variant_preun debug
%kernel_variant_post -v debug
%endif
%if %{with_zfcpdump}
%kernel_variant_preun zfcpdump
%kernel_variant_post -v zfcpdump
%endif
if [ -x /sbin/ldconfig ]
then
/sbin/ldconfig -X || exit $?
fi
###
### file lists
###
%if %{with_headers}
%files headers
/usr/include/*
%endif
%if %{with_cross_headers}
%files cross-headers
/usr/*-linux-gnu/include/*
%endif
%if %{with_kernel_abi_stablelists}
%files -n kernel-abi-stablelists
/lib/modules/kabi-*
%endif
%if %{with_kabidw_base}
%ifarch x86_64 s390x ppc64 ppc64le aarch64
%files kernel-kabidw-base-internal
%defattr(-,root,root)
/kabidw-base/%{_target_cpu}/*
%endif
%endif
# only some architecture builds need kernel-doc
%if %{with_doc}
%files doc
%defattr(-,root,root)
%{_datadir}/doc/kernel-doc-%{rpmversion}-%{pkgrelease}/Documentation/*
%dir %{_datadir}/doc/kernel-doc-%{rpmversion}-%{pkgrelease}/Documentation
%dir %{_datadir}/doc/kernel-doc-%{rpmversion}-%{pkgrelease}
%endif
%if %{with_perf}
%files -n perf
%{_bindir}/perf
%{_libdir}/libperf-jvmti.so
%dir %{_libexecdir}/perf-core
%{_libexecdir}/perf-core/*
%{_datadir}/perf-core/*
%{_mandir}/man[1-8]/perf*
%{_sysconfdir}/bash_completion.d/perf
%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
%{_docdir}/perf-tip/tips.txt
%files -n python3-perf
%{python3_sitearch}/*
%if %{with_debuginfo}
%files -f perf-debuginfo.list -n perf-debuginfo
%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
%endif
# with_perf
%endif
%if %{with_tools}
%ifnarch %{cpupowerarchs}
%files -n kernel-tools
%else
%files -n kernel-tools -f cpupower.lang
%{_bindir}/cpupower
%{_datadir}/bash-completion/completions/cpupower
%ifarch x86_64
%{_bindir}/centrino-decode
%{_bindir}/powernow-k8-decode
%endif
%{_unitdir}/cpupower.service
%{_mandir}/man[1-8]/cpupower*
%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
%ifarch x86_64
%{_bindir}/x86_energy_perf_policy
%{_mandir}/man8/x86_energy_perf_policy*
%{_bindir}/turbostat
%{_mandir}/man8/turbostat*
%{_bindir}/intel-speed-select
%endif
# cpupowerarchs
%endif
%{_bindir}/tmon
%{_bindir}/iio_event_monitor
%{_bindir}/iio_generic_buffer
%{_bindir}/lsiio
%{_bindir}/lsgpio
%{_bindir}/gpio-hammer
%{_bindir}/gpio-event-mon
%{_bindir}/gpio-watch
%{_mandir}/man1/kvm_stat*
%{_bindir}/kvm_stat
%{_unitdir}/kvm_stat.service
%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
%{_bindir}/page_owner_sort
%{_bindir}/slabinfo
%if %{with_debuginfo}
%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
%endif
%ifarch %{cpupowerarchs}
%files -n kernel-tools-libs
%{_libdir}/libcpupower.so.0
%{_libdir}/libcpupower.so.0.0.1
%files -n kernel-tools-libs-devel
%{_libdir}/libcpupower.so
%{_includedir}/cpufreq.h
%endif
# with_tools
%endif
%if %{with_bpftool}
%files -n bpftool
%{_sbindir}/bpftool
%{_sysconfdir}/bash_completion.d/bpftool
%{_mandir}/man8/bpftool-cgroup.8.gz
%{_mandir}/man8/bpftool-gen.8.gz
%{_mandir}/man8/bpftool-iter.8.gz
%{_mandir}/man8/bpftool-link.8.gz
%{_mandir}/man8/bpftool-map.8.gz
%{_mandir}/man8/bpftool-prog.8.gz
%{_mandir}/man8/bpftool-perf.8.gz
%{_mandir}/man8/bpftool.8.gz
%{_mandir}/man8/bpftool-net.8.gz
%{_mandir}/man8/bpftool-feature.8.gz
%{_mandir}/man8/bpftool-btf.8.gz
%{_mandir}/man8/bpftool-struct_ops.8.gz
%if %{with_debuginfo}
%files -f bpftool-debuginfo.list -n bpftool-debuginfo
%defattr(-,root,root)
%endif
%endif
%if %{with_selftests}
%files selftests-internal
%{_libexecdir}/ksamples
%{_libexecdir}/kselftests
%endif
# empty meta-package
%ifnarch %nobuildarches noarch
%files
%endif
%if %{with_gcov}
%ifnarch %nobuildarches noarch
%files gcov
%{_builddir}
%endif
%endif
# This is %%{image_install_path} on an arch where that includes ELF files,
# or empty otherwise.
%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
#
# This macro defines the %%files sections for a kernel package
# and its devel and debuginfo packages.
# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
#
%define kernel_variant_files(k:) \
%if %{2}\
%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
%{!?_licensedir:%global license %%doc}\
%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
%ifarch %{arm} aarch64\
/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
%endif\
%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
%dir /lib/modules\
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
/lib/modules/%{KVERREL}%{?3:+%{3}}/crashkernel.default\
%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
%if %{1}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
%endif\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
%{expand:%%files %{?3:%{3}-}devel}\
%defverify(not mtime)\
/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
%{expand:%%files %{?3:%{3}-}devel-matched}\
%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
%if %{with_debuginfo}\
%ifnarch noarch\
%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
%endif\
%endif\
%if %{?3:1} %{!?3:0}\
%{expand:%%files %{3}}\
%endif\
%endif\
%{nil}
%kernel_variant_files %{_use_vdso} %{with_up}
%kernel_variant_files %{_use_vdso} %{with_debug} debug
%if %{with_debug_meta}
%files debug
%files debug-core
%files debug-devel
%files debug-devel-matched
%files debug-modules
%files debug-modules-extra
%endif
%kernel_variant_files %{use_vdso} %{with_pae} lpae
%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
%define kernel_variant_ipaclones(k:) \
%if %{1}\
%if %{with_ipaclones}\
%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
%defattr(-,root,root)\
%defverify(not mtime)\
/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
%endif\
%endif\
%{nil}
%kernel_variant_ipaclones %{with_up}
# plz don't put in a version string unless you're going to tag
# and build.
#
#
%changelog
* Sun Dec 12 2021 Neal Gompa <ngompa@centosproject.org> [5.14.0-29.hs1.el9]
- redhat/configs: Enable the Btrfs file system (Neal Gompa)
- redhat/configs: Enable CONFIG_CRYPTO_BLAKE2B (Neal Gompa) [2031547]
* Thu Dec 09 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-29.el9]
- posix-cpu-timers: Prevent spuriously armed 0-value itimer (Phil Auld) [2022896]
- hrtimer: Unbreak hrtimer_force_reprogram() (Phil Auld) [2022896]
- hrtimer: Use raw_cpu_ptr() in clock_was_set() (Phil Auld) [2022896]
- clocksource: Make clocksource watchdog test safe for slow-HZ systems (Phil Auld) [2022896]
- posix-cpu-timers: Recalc next expiration when timer_settime() ends up not queueing (Phil Auld) [2022896]
- posix-cpu-timers: Consolidate timer base accessor (Phil Auld) [2022896]
- posix-cpu-timers: Remove confusing return value override (Phil Auld) [2022896]
- posix-cpu-timers: Force next expiration recalc after itimer reset (Phil Auld) [2022896]
- posix-cpu-timers: Force next_expiration recalc after timer deletion (Phil Auld) [2022896]
- posix-cpu-timers: Assert task sighand is locked while starting cputime counter (Phil Auld) [2022896]
- posix-timers: Remove redundant initialization of variable ret (Phil Auld) [2022896]
- hrtimer: Avoid more SMP function calls in clock_was_set() (Phil Auld) [2022896]
- hrtimer: Avoid unnecessary SMP function calls in clock_was_set() (Phil Auld) [2022896]
- hrtimer: Add bases argument to clock_was_set() (Phil Auld) [2022896]
- time/timekeeping: Avoid invoking clock_was_set() twice (Phil Auld) [2022896]
- timekeeping: Distangle resume and clock-was-set events (Phil Auld) [2022896]
- timerfd: Provide timerfd_resume() (Phil Auld) [2022896]
- hrtimer: Force clock_was_set() handling for the HIGHRES=n, NOHZ=y case (Phil Auld) [2022896]
- hrtimer: Ensure timerfd notification for HIGHRES=n (Phil Auld) [2022896]
- hrtimer: Consolidate reprogramming code (Phil Auld) [2022896]
- hrtimer: Avoid double reprogramming in __hrtimer_start_range_ns() (Phil Auld) [2022896]
* Wed Dec 08 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-28.el9]
- rcu: Fix rcu_dynticks_curr_cpu_in_eqs() vs noinstr (Waiman Long) [2022806]
- efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock() (Waiman Long) [2022806]
- Documentation: core-api/cpuhotplug: Rewrite the API section (Waiman Long) [2022806]
- docs/core-api: Modify document layout (Waiman Long) [2022806]
- futex: Avoid redundant task lookup (Waiman Long) [2022806]
- futex: Clarify comment for requeue_pi_wake_futex() (Waiman Long) [2022806]
- cgroup: Avoid compiler warnings with no subsystems (Waiman Long) [2022806]
- media/atomisp: Use lockdep instead of *mutex_is_locked() (Waiman Long) [2022806]
- debugobjects: Make them PREEMPT_RT aware (Waiman Long) [2022806]
- cgroup/cpuset: Enable event notification when partition state changes (Waiman Long) [2022806]
- cgroup: cgroup-v1: clean up kernel-doc notation (Waiman Long) [2022806]
- locking/semaphore: Add might_sleep() to down_*() family (Waiman Long) [2022806]
- static_call: Update API documentation (Waiman Long) [2022806]
- torture: Replace deprecated CPU-hotplug functions. (Waiman Long) [2022806]
- clocksource: Replace deprecated CPU-hotplug functions. (Waiman Long) [2022806]
- smpboot: Replace deprecated CPU-hotplug functions. (Waiman Long) [2022806]
- rcu: Replace deprecated CPU-hotplug functions (Waiman Long) [2022806]
- genirq/affinity: Replace deprecated CPU-hotplug functions. (Waiman Long) [2022806]
- cgroup: Replace deprecated CPU-hotplug functions. (Waiman Long) [2022806]
- mm: Replace deprecated CPU-hotplug functions. (Waiman Long) [2022806]
- thermal: Replace deprecated CPU-hotplug functions. (Waiman Long) [2022806]
- md/raid5: Replace deprecated CPU-hotplug functions. (Waiman Long) [2022806]
- perf/hw_breakpoint: Replace deprecated CPU-hotplug functions (Waiman Long) [2022806]
- perf/x86/intel: Replace deprecated CPU-hotplug functions (Waiman Long) [2022806]
- Documentation: Replace deprecated CPU-hotplug functions. (Waiman Long) [2022806]
- Documentation/atomic_t: Document forward progress expectations (Waiman Long) [2022806]
- eventfd: Make signal recursion protection a task bit (Waiman Long) [2022806]
- locking/atomic: simplify non-atomic wrappers (Waiman Long) [2022806]
- cgroup/cpuset: Fix violation of cpuset locking rule (Waiman Long) [2022806]
- cgroup/cpuset: Fix a partition bug with hotplug (Waiman Long) [2022806]
- cgroup/cpuset: Miscellaneous code cleanup (Waiman Long) [2022806]
- rcu: Mark accesses to rcu_state.n_force_qs (Waiman Long) [2022806]
- rcu: Print human-readable message for schedule() in RCU reader (Waiman Long) [2022806]
- cgroup: remove cgroup_mount from comments (Waiman Long) [2022806]
- doc: Update stallwarn.rst with recent changes (Waiman Long) [2022806]
- locking/atomic: add generic arch_*() bitops (Waiman Long) [2022806]
- locking/atomic: add arch_atomic_long*() (Waiman Long) [2022806]
- locking/atomic: centralize generated headers (Waiman Long) [2022806]
- locking/atomic: remove ARCH_ATOMIC remanants (Waiman Long) [2022806]
- locking/atomic: simplify ifdef generation (Waiman Long) [2022806]
- rcu: Fix macro name CONFIG_TASKS_RCU_TRACE (Waiman Long) [2022806]
- scftorture: Avoid NULL pointer exception on early exit (Waiman Long) [2022806]
- torture: Make kvm-test-1-run-qemu.sh check for reboot loops (Waiman Long) [2022806]
- torture: Add timestamps to kvm-test-1-run-qemu.sh output (Waiman Long) [2022806]
- torture: Don't use "test" command's "-a" argument (Waiman Long) [2022806]
- torture: Make kvm-test-1-run-batch.sh select per-scenario affinity masks (Waiman Long) [2022806]
- torture: Consistently name "qemu*" test output files (Waiman Long) [2022806]
- torture: Use numeric taskset argument in jitter.sh (Waiman Long) [2022806]
- rcutorture: Upgrade two-CPU scenarios to four CPUs (Waiman Long) [2022806]
- torture: Make kvm-test-1-run-qemu.sh apply affinity (Waiman Long) [2022806]
- torture: Don't redirect qemu-cmd comment lines (Waiman Long) [2022806]
- torture: Make kvm.sh select per-scenario affinity masks (Waiman Long) [2022806]
- torture: Put kvm.sh batch-creation awk script into a temp file (Waiman Long) [2022806]
- locking/rwsem: Remove an unused parameter of rwsem_wake() (Waiman Long) [2022806]
- rcu: Explain why rcu_all_qs() is a stub in preemptible TREE RCU (Waiman Long) [2022806]
- Documentation/atomic_t: Document cmpxchg() vs try_cmpxchg() (Waiman Long) [2022806]
- rcu: Use per_cpu_ptr to get the pointer of per_cpu variable (Waiman Long) [2022806]
- rcu: Remove useless "ret" update in rcu_gp_fqs_loop() (Waiman Long) [2022806]
- scftorture: Add RPC-like IPI tests (Waiman Long) [2022806]
- tools/nolibc: Implement msleep() (Waiman Long) [2022806]
- tools: include: nolibc: Fix a typo occured to occurred in the file nolibc.h (Waiman Long) [2022806]
- torture: Move parse-console.sh call to PATH-aware scripts (Waiman Long) [2022806]
- torture: Make kvm-recheck.sh skip kcsan.sum for build-only runs (Waiman Long) [2022806]
- rcu-tasks: Fix synchronize_rcu_rude() typo in comment (Waiman Long) [2022806]
- rcuscale: Console output claims too few grace periods (Waiman Long) [2022806]
- torture: Protect kvm-remote.sh directory trees from /tmp reaping (Waiman Long) [2022806]
- torture: Log more kvm-remote.sh information (Waiman Long) [2022806]
- torture: Make kvm-recheck-lock.sh tolerate qemu-cmd comments (Waiman Long) [2022806]
- torture: Make kvm-recheck-scf.sh tolerate qemu-cmd comments (Waiman Long) [2022806]
- rcu/doc: Add a quick quiz to explain further why we need smp_mb__after_unlock_lock() (Waiman Long) [2022806]
- rcu: Make rcu_gp_init() and rcu_gp_fqs_loop noinline to conserve stack (Waiman Long) [2022806]
- torture: Create KCSAN summaries for torture.sh runs (Waiman Long) [2022806]
- torture: Enable KCSAN summaries over groups of torture-test runs (Waiman Long) [2022806]
- rcu: Mark lockless ->qsmask read in rcu_check_boost_fail() (Waiman Long) [2022806]
- srcutiny: Mark read-side data races (Waiman Long) [2022806]
- locktorture: Count lock readers (Waiman Long) [2022806]
- locktorture: Mark statistics data races (Waiman Long) [2022806]
- docs: Fix a typo in Documentation/RCU/stallwarn.rst (Waiman Long) [2022806]
- rcu-tasks: Mark ->trc_reader_special.b.need_qs data races (Waiman Long) [2022806]
- rcu-tasks: Mark ->trc_reader_nesting data races (Waiman Long) [2022806]
- rcu-tasks: Add comments explaining task_struct strategy (Waiman Long) [2022806]
- rcu: Start timing stall repetitions after warning complete (Waiman Long) [2022806]
- rcu: Do not disable GP stall detection in rcu_cpu_stall_reset() (Waiman Long) [2022806]
- rcu/tree: Handle VM stoppage in stall detection (Waiman Long) [2022806]
- rculist: Unify documentation about missing list_empty_rcu() (Waiman Long) [2022806]
- rcu: Mark accesses in tree_stall.h (Waiman Long) [2022806]
- Documentation/RCU: Fix nested inline markup (Waiman Long) [2022806]
- rcu: Mark accesses to ->rcu_read_lock_nesting (Waiman Long) [2022806]
- Documentation/RCU: Fix emphasis markers (Waiman Long) [2022806]
- rcu: Weaken ->dynticks accesses and updates (Waiman Long) [2022806]
- rcu: Remove special bit at the bottom of the ->dynticks counter (Waiman Long) [2022806]
- rcu/nocb: Remove NOCB deferred wakeup from rcutree_dead_cpu() (Waiman Long) [2022806]
- rcu/nocb: Start moving nocb code to its own plugin file (Waiman Long) [2022806]
- rcutorture: Preempt rather than block when testing task stalls (Waiman Long) [2022806]
- rcu: Fix stall-warning deadlock due to non-release of rcu_node ->lock (Waiman Long) [2022806]
- rcu: Fix to include first blocked task in stall warning (Waiman Long) [2022806]
- torture: Make torture.sh accept --do-all and --donone (Waiman Long) [2022806]
- torture: Add clocksource-watchdog testing to torture.sh (Waiman Long) [2022806]
- refscale: Add measurement of clock readout (Waiman Long) [2022806]
* Tue Dec 07 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-27.el9]
- x86: change default to spec_store_bypass_disable=prctl spectre_v2_user=prctl (Wander Lairson Costa) [2002637]
- Enable PREEMPT_DYNAMIC for all but s390x (Phil Auld) [2019472]
- preempt: Restore preemption model selection configs (Phil Auld) [2019472]
- sched: Provide Kconfig support for default dynamic preempt mode (Phil Auld) [2019472]
- x86/sgx: Add TAINT_TECH_PREVIEW for virtual EPC (Wander Lairson Costa) [2025959]
- x86/sgx: mark tech preview (Wander Lairson Costa) [2025959]
- ipv6: When forwarding count rx stats on the orig netdev (Hangbin Liu) [2025457]
- ipv6: make exception cache less predictible (Hangbin Liu) [2025457]
- icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe (Guillaume Nault) [2024572]
- net: prefer socket bound to interface when not in VRF (Guillaume Nault) [2024572]
- net: ipv4: Fix rtnexthop len when RTA_FLOW is present (Guillaume Nault) [2024572]
- nexthop: Fix memory leaks in nexthop notification chain listeners (Guillaume Nault) [2024572]
- nexthop: Fix division by zero while replacing a resilient group (Guillaume Nault) [2024572]
- ipv4: fix endianness issue in inet_rtm_getroute_build_skb() (Guillaume Nault) [2024572]
- crypto: ccp - Make use of the helper macro kthread_run() (Vladis Dronov) [1997595]
- crypto: ccp - Fix whitespace in sev_cmd_buffer_len() (Vladis Dronov) [1997595]
- crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd() (Vladis Dronov) [1997595] {CVE-2021-3744 CVE-2021-3764}
- net/l2tp: Fix reference count leak in l2tp_udp_recv_core (Guillaume Nault) [2023271]
- scsi: megaraid: Clean up some inconsistent indenting (Tomas Henzl) [1879402]
- scsi: megaraid: Fix Coccinelle warning (Tomas Henzl) [1879402]
- scsi: megaraid_sas: Driver version update to 07.719.03.00-rc1 (Tomas Henzl) [1879402]
- scsi: megaraid_sas: Add helper functions for irq_context (Tomas Henzl) [1879402]
- scsi: megaraid_sas: Fix concurrent access to ISR between IRQ polling and real interrupt (Tomas Henzl) [1879402]
- tpm: ibmvtpm: Avoid error message when process gets signal while waiting (Štěpán Horáček) [1983089]
- char: tpm: cr50_i2c: convert to new probe interface (Štěpán Horáček) [1983089]
- char: tpm: Kconfig: remove bad i2c cr50 select (Štěpán Horáček) [1983089]
* Mon Dec 06 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-26.el9]
- redhat/configs: enable CONFIG_CEPH_FSCACHE (Jeffrey Layton) [2017798]
- ceph: add a new metric to keep track of remote object copies (Jeffrey Layton) [2017798]
- libceph, ceph: move ceph_osdc_copy_from() into cephfs code (Jeffrey Layton) [2017798]
- ceph: clean-up metrics data structures to reduce code duplication (Jeffrey Layton) [2017798]
- ceph: split 'metric' debugfs file into several files (Jeffrey Layton) [2017798]
- ceph: return the real size read when it hits EOF (Jeffrey Layton) [2017798]
- ceph: properly handle statfs on multifs setups (Jeffrey Layton) [2017798]
- ceph: shut down mount on bad mdsmap or fsmap decode (Jeffrey Layton) [2017798]
- ceph: fix mdsmap decode when there are MDS's beyond max_mds (Jeffrey Layton) [2017798]
- ceph: ignore the truncate when size won't change with Fx caps issued (Jeffrey Layton) [2017798]
- ceph: don't rely on error_string to validate blocklisted session. (Jeffrey Layton) [2017798]
- ceph: just use ci->i_version for fscache aux info (Jeffrey Layton) [2017798]
- ceph: shut down access to inode when async create fails (Jeffrey Layton) [2017798]
- ceph: refactor remove_session_caps_cb (Jeffrey Layton) [2017798]
- ceph: fix auth cap handling logic in remove_session_caps_cb (Jeffrey Layton) [2017798]
- ceph: drop private list from remove_session_caps_cb (Jeffrey Layton) [2017798]
- ceph: don't use -ESTALE as special return code in try_get_cap_refs (Jeffrey Layton) [2017798]
- ceph: print inode numbers instead of pointer values (Jeffrey Layton) [2017798]
- ceph: enable async dirops by default (Jeffrey Layton) [2017798]
- libceph: drop ->monmap and err initialization (Jeffrey Layton) [2017798]
- ceph: convert to noop_direct_IO (Jeffrey Layton) [2017798]
- ceph: fix handling of "meta" errors (Jeffrey Layton) [2017798]
- ceph: skip existing superblocks that are blocklisted or shut down when mounting (Jeffrey Layton) [2017798]
- ceph: fix off by one bugs in unsafe_request_wait() (Jeffrey Layton) [2017798]
- ceph: fix dereference of null pointer cf (Jeffrey Layton) [2017798]
- ceph: drop the mdsc_get_session/put_session dout messages (Jeffrey Layton) [2017798]
- ceph: lockdep annotations for try_nonblocking_invalidate (Jeffrey Layton) [2017798]
- ceph: don't WARN if we're forcibly removing the session caps (Jeffrey Layton) [2017798]
- ceph: don't WARN if we're force umounting (Jeffrey Layton) [2017798]
- ceph: remove the capsnaps when removing caps (Jeffrey Layton) [2017798]
- ceph: request Fw caps before updating the mtime in ceph_write_iter (Jeffrey Layton) [2017798]
- ceph: reconnect to the export targets on new mdsmaps (Jeffrey Layton) [2017798]
- ceph: print more information when we can't find snaprealm (Jeffrey Layton) [2017798]
- ceph: add ceph_change_snap_realm() helper (Jeffrey Layton) [2017798]
- ceph: remove redundant initializations from mdsc and session (Jeffrey Layton) [2017798]
- ceph: cancel delayed work instead of flushing on mdsc teardown (Jeffrey Layton) [2017798]
- ceph: add a new vxattr to return auth mds for an inode (Jeffrey Layton) [2017798]
- ceph: remove some defunct forward declarations (Jeffrey Layton) [2017798]
- ceph: flush the mdlog before waiting on unsafe reqs (Jeffrey Layton) [2017798]
- ceph: flush mdlog before umounting (Jeffrey Layton) [2017798]
- ceph: make iterate_sessions a global symbol (Jeffrey Layton) [2017798]
- ceph: make ceph_create_session_msg a global symbol (Jeffrey Layton) [2017798]
- ceph: fix comment about short copies in ceph_write_end (Jeffrey Layton) [2017798]
- ceph: fix memory leak on decode error in ceph_handle_caps (Jeffrey Layton) [2017798]
* Fri Dec 03 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-25.el9]
- x86: Pin task-stack in __get_wchan() (Chris von Recklinghausen) [2022169]
- x86: Fix __get_wchan() for !STACKTRACE (Chris von Recklinghausen) [2022169]
- sched: Add wrapper for get_wchan() to keep task blocked (Chris von Recklinghausen) [2022169]
- x86: Fix get_wchan() to support the ORC unwinder (Chris von Recklinghausen) [2022169]
- proc: Use task_is_running() for wchan in /proc/$pid/stat (Chris von Recklinghausen) [2022169]
- leaking_addresses: Always print a trailing newline (Chris von Recklinghausen) [2022169]
- Revert "proc/wchan: use printk format instead of lookup_symbol_name()" (Chris von Recklinghausen) [2022169]
- sched: Fill unconditional hole induced by sched_entity (Chris von Recklinghausen) [2022169]
- powerpc/bpf: Fix write protecting JIT code (Jiri Olsa) [2023618]
- vfs: check fd has read access in kernel_read_file_from_fd() (Carlos Maiolino) [2022893]
- Disable idmapped mounts (Alexey Gladkov) [2018141]
- KVM: s390: Fix handle_sske page fault handling (Thomas Huth) [1870686]
- KVM: s390: Simplify SIGP Set Arch handling (Thomas Huth) [1870686]
- KVM: s390: pv: avoid stalls when making pages secure (Thomas Huth) [1870686]
- KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm (Thomas Huth) [1870686]
- KVM: s390: pv: avoid double free of sida page (Thomas Huth) [1870686]
- KVM: s390: pv: add macros for UVC CC values (Thomas Huth) [1870686]
- s390/uv: fully validate the VMA before calling follow_page() (Thomas Huth) [1870686]
- s390/gmap: don't unconditionally call pte_unmap_unlock() in __gmap_zap() (Thomas Huth) [1870686]
- s390/gmap: validate VMA in __gmap_zap() (Thomas Huth) [1870686]
- KVM: s390: preserve deliverable_mask in __airqs_kick_single_vcpu (Thomas Huth) [1870686]
- KVM: s390: index kvm->arch.idle_mask by vcpu_idx (Thomas Huth) [1870686]
- KVM: s390: clear kicked_mask before sleeping again (Thomas Huth) [1870686]
- KVM: s390: Function documentation fixes (Thomas Huth) [1870686]
- s390/mm: fix kernel doc comments (Thomas Huth) [1870686]
- KVM: s390: generate kvm hypercall functions (Thomas Huth) [1870686]
- s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification (Thomas Huth) [1870686]
- s390/vfio-ap: r/w lock for PQAP interception handler function pointer (Thomas Huth) [1870686]
- KVM: Rename lru_slot to last_used_slot (Thomas Huth) [1870686]
- s390/uv: de-duplicate checks for Protected Host Virtualization (Thomas Huth) [1870686]
- s390/boot: disable Secure Execution in dump mode (Thomas Huth) [1870686]
- s390/boot: move uv function declarations to boot/uv.h (Thomas Huth) [1870686]
- s390/boot: move all linker symbol declarations from c to h files (Thomas Huth) [1870686]
- redhat/configs: Remove CONFIG_INFINIBAND_I40IW (Kamal Heib) [1920720]
* Wed Dec 01 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-24.el9]
- perf test: Handle fd gaps in test__dso_data_reopen (Michael Petlan) [1937209]
- perf tests vmlinux-kallsyms: Ignore hidden symbols (Michael Petlan) [1975103]
- perf script: Fix PERF_SAMPLE_WEIGHT_STRUCT support (Michael Petlan) [2009378]
- redhat/kernel.spec.template: Link perf with --export-dynamic (Michael Petlan) [2006775]
- xfs: fix I_DONTCACHE (Carlos Maiolino) [2022435]
- virtio: write back F_VERSION_1 before validate (Thomas Huth) [2008401]
- net/tls: Fix flipped sign in tls_err_abort() calls (Sabrina Dubroca) [2022006]
- net/tls: Fix flipped sign in async_wait.err assignment (Sabrina Dubroca) [2022006]
- hyper-v: Replace uuid.h with types.h (Mohammed Gamal) [2008572]
- Drivers: hv: vmbus: Remove unused code to check for subchannels (Mohammed Gamal) [2008572]
- hv: hyperv.h: Remove unused inline functions (Mohammed Gamal) [2008572]
- asm-generic/hyperv: provide cpumask_to_vpset_noself (Mohammed Gamal) [2008572]
- asm-generic/hyperv: Add missing #include of nmi.h (Mohammed Gamal) [2008572]
- x86/hyperv: Avoid erroneously sending IPI to 'self' (Mohammed Gamal) [2008572]
- x86/hyperv: remove on-stack cpumask from hv_send_ipi_mask_allbutself (Mohammed Gamal) [2008572]
- [s390] net/smc: improved fix wait on already cleared link (Mete Durlu) [1869652]
- [s390] net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work (Mete Durlu) [1869652]
- [s390] net/smc: add missing error check in smc_clc_prfx_set() (Mete Durlu) [1869652]
- cifs: enable SMB_DIRECT in RHEL9 (Ronnie Sahlberg) [1965209]
- scsi: mpt3sas: Clean up some inconsistent indenting (Tomas Henzl) [1876119]
- scsi: mpt3sas: Call cpu_relax() before calling udelay() (Tomas Henzl) [1876119]
- scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute (Tomas Henzl) [1876119]
- scsi: mpt3sas: Update driver version to 39.100.00.00 (Tomas Henzl) [1876119]
- scsi: mpt3sas: Use firmware recommended queue depth (Tomas Henzl) [1876119]
- scsi: mpt3sas: Bump driver version to 38.100.00.00 (Tomas Henzl) [1876119]
- scsi: mpt3sas: Add io_uring iopoll support (Tomas Henzl) [1876119]
- serial: 8250_lpss: Extract dw8250_do_set_termios() for common use (David Arcari) [1880032]
- serial: 8250_lpss: Enable DMA on Intel Elkhart Lake (David Arcari) [1880032]
- dmaengine: dw: Convert members to u32 in platform data (David Arcari) [1880032]
- dmaengine: dw: Simplify DT property parser (David Arcari) [1880032]
- dmaengine: dw: Remove error message from DT parsing code (David Arcari) [1880032]
- dmaengine: dw: Program xBAR hardware for Elkhart Lake (David Arcari) [1880032]
- vmxnet3: switch from 'pci_' to 'dma_' API (Kamal Heib) [2003297]
- vmxnet3: update to version 6 (Kamal Heib) [2003297]
- vmxnet3: increase maximum configurable mtu to 9190 (Kamal Heib) [2003297]
- vmxnet3: set correct hash type based on rss information (Kamal Heib) [2003297]
- vmxnet3: add support for ESP IPv6 RSS (Kamal Heib) [2003297]
- vmxnet3: remove power of 2 limitation on the queues (Kamal Heib) [2003297]
- vmxnet3: add support for 32 Tx/Rx queues (Kamal Heib) [2003297]
- vmxnet3: prepare for version 6 changes (Kamal Heib) [2003297]
* Mon Nov 29 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-23.el9]
- PCI/VPD: Defer VPD sizing until first access (Myron Stowe) [2021298]
- PCI/VPD: Use unaligned access helpers (Myron Stowe) [2021298]
- PCI/VPD: Clean up public VPD defines and inline functions (Myron Stowe) [2021298]
- cxgb4: Use pci_vpd_find_id_string() to find VPD ID string (Myron Stowe) [2021298]
- PCI/VPD: Add pci_vpd_find_id_string() (Myron Stowe) [2021298]
- PCI/VPD: Include post-processing in pci_vpd_find_tag() (Myron Stowe) [2021298]
- PCI/VPD: Stop exporting pci_vpd_find_info_keyword() (Myron Stowe) [2021298]
- PCI/VPD: Stop exporting pci_vpd_find_tag() (Myron Stowe) [2021298]
- scsi: cxlflash: Search VPD with pci_vpd_find_ro_info_keyword() (Myron Stowe) [2021298]
- cxgb4: Search VPD with pci_vpd_find_ro_info_keyword() (Myron Stowe) [2021298]
- cxgb4: Remove unused vpd_param member ec (Myron Stowe) [2021298]
- cxgb4: Validate VPD checksum with pci_vpd_check_csum() (Myron Stowe) [2021298]
- bnxt: Search VPD with pci_vpd_find_ro_info_keyword() (Myron Stowe) [2021298]
- bnxt: Read VPD with pci_vpd_alloc() (Myron Stowe) [2021298]
- bnx2x: Search VPD with pci_vpd_find_ro_info_keyword() (Myron Stowe) [2021298]
- bnx2x: Read VPD with pci_vpd_alloc() (Myron Stowe) [2021298]
- bnx2: Replace open-coded byte swapping with swab32s() (Myron Stowe) [2021298]
- bnx2: Search VPD with pci_vpd_find_ro_info_keyword() (Myron Stowe) [2021298]
- sfc: falcon: Search VPD with pci_vpd_find_ro_info_keyword() (Myron Stowe) [2021298]
- sfc: falcon: Read VPD with pci_vpd_alloc() (Myron Stowe) [2021298]
- tg3: Search VPD with pci_vpd_find_ro_info_keyword() (Myron Stowe) [2021298]
- tg3: Validate VPD checksum with pci_vpd_check_csum() (Myron Stowe) [2021298]
- tg3: Read VPD with pci_vpd_alloc() (Myron Stowe) [2021298]
- sfc: Search VPD with pci_vpd_find_ro_info_keyword() (Myron Stowe) [2021298]
- sfc: Read VPD with pci_vpd_alloc() (Myron Stowe) [2021298]
- PCI/VPD: Add pci_vpd_check_csum() (Myron Stowe) [2021298]
- PCI/VPD: Add pci_vpd_find_ro_info_keyword() (Myron Stowe) [2021298]
- PCI/VPD: Add pci_vpd_alloc() (Myron Stowe) [2021298]
- PCI/VPD: Treat invalid VPD like missing VPD capability (Myron Stowe) [2021298]
- PCI/VPD: Determine VPD size in pci_vpd_init() (Myron Stowe) [2021298]
- PCI/VPD: Embed struct pci_vpd in struct pci_dev (Myron Stowe) [2021298]
- PCI/VPD: Remove struct pci_vpd.valid member (Myron Stowe) [2021298]
- PCI/VPD: Remove struct pci_vpd_ops (Myron Stowe) [2021298]
- PCI/VPD: Reorder pci_read_vpd(), pci_write_vpd() (Myron Stowe) [2021298]
- PCI/VPD: Remove struct pci_vpd.flag (Myron Stowe) [2021298]
- PCI/VPD: Make pci_vpd_wait() uninterruptible (Myron Stowe) [2021298]
- PCI/VPD: Remove pci_vpd_size() old_size argument (Myron Stowe) [2021298]
- PCI/VPD: Allow access to valid parts of VPD if some is invalid (Myron Stowe) [2021298]
- PCI/VPD: Don't check Large Resource Item Names for validity (Myron Stowe) [2021298]
- PCI/VPD: Reject resource tags with invalid size (Myron Stowe) [2021298]
- PCI/VPD: Treat initial 0xff as missing EEPROM (Myron Stowe) [2021298]
- PCI/VPD: Check Resource Item Names against those valid for type (Myron Stowe) [2021298]
- PCI/VPD: Correct diagnostic for VPD read failure (Myron Stowe) [2021298]
* Fri Nov 26 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-22.el9]
- Add automotive CI jobs (Michael Hofmann)
- sched/scs: Reset the shadow stack when idle_task_exit (Phil Auld) [1992256]
- sched/fair: Null terminate buffer when updating tunable_scaling (Phil Auld) [1992256]
- sched/fair: Add ancestors of unthrottled undecayed cfs_rq (Phil Auld) [1981743 1992256]
- cpufreq: schedutil: Destroy mutex before kobject_put() frees the memory (Phil Auld) [1992256]
- sched/idle: Make the idle timer expire in hard interrupt context (Phil Auld) [1992256]
- sched: Prevent balance_push() on remote runqueues (Phil Auld) [1992256]
- sched/fair: Mark tg_is_idle() an inline in the !CONFIG_FAIR_GROUP_SCHED case (Phil Auld) [1992256]
- sched/topology: Skip updating masks for non-online nodes (Phil Auld) [1992256]
- sched: Skip priority checks with SCHED_FLAG_KEEP_PARAMS (Phil Auld) [1992256]
- sched: Fix UCLAMP_FLAG_IDLE setting (Phil Auld) [1992256]
- cpufreq: schedutil: Use kobject release() method to free sugov_tunables (Phil Auld) [1992256]
- sched/deadline: Fix missing clock update in migrate_task_rq_dl() (Phil Auld) [1992256]
- sched/fair: Avoid a second scan of target in select_idle_cpu (Phil Auld) [1992256]
- sched/fair: Use prev instead of new target as recent_used_cpu (Phil Auld) [1992256]
- sched: Replace deprecated CPU-hotplug functions. (Phil Auld) [1992256]
- sched: Introduce dl_task_check_affinity() to check proposed affinity (Phil Auld) [1992256]
- sched: Allow task CPU affinity to be restricted on asymmetric systems (Phil Auld) [1992256]
- sched: Split the guts of sched_setaffinity() into a helper function (Phil Auld) [1992256]
- sched: Introduce task_struct::user_cpus_ptr to track requested affinity (Phil Auld) [1992256]
- sched: Reject CPU affinity changes based on task_cpu_possible_mask() (Phil Auld) [1992256]
- cpuset: Cleanup cpuset_cpus_allowed_fallback() use in select_fallback_rq() (Phil Auld) [1992256]
- cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus() (Phil Auld) [1992256]
- cpuset: Don't use the cpu_possible_mask as a last resort for cgroup v1 (Phil Auld) [1992256]
- sched: Introduce task_cpu_possible_mask() to limit fallback rq selection (Phil Auld) [1992256]
- sched: Cgroup SCHED_IDLE support (Phil Auld) [1992256]
- sched: Don't report SCHED_FLAG_SUGOV in sched_getattr() (Phil Auld) [1992256]
- sched/deadline: Fix reset_on_fork reporting of DL tasks (Phil Auld) [1992256]
- sched/numa: Fix is_core_idle() (Phil Auld) [1992256]
- sched: remove redundant on_rq status change (Phil Auld) [1992256]
- sched: Optimize housekeeping_cpumask() in for_each_cpu_and() (Phil Auld) [1992256]
- sched/sysctl: Move extern sysctl declarations to sched.h (Phil Auld) [1992256]
- sched/debug: Don't update sched_domain debug directories before sched_debug_init() (Phil Auld) [1992256]
* Thu Nov 25 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-21.el9]
- clocksource: Increase WATCHDOG_MAX_SKEW (Waiman Long) [2017164]
- x86/hpet: Use another crystalball to evaluate HPET usability (Waiman Long) [2017164]
- scsi: target: Fix the pgr/alua_support_store functions (Maurizio Lombardi) [2023439]
- redhat: fix typo and make the output more silent for dist-git sync (Herton R. Krzesinski)
- x86: ACPI: cstate: Optimize C3 entry on AMD CPUs (David Arcari) [1998526]
- scsi: lpfc: Update lpfc version to 14.0.0.3 (Dick Kennedy) [2021327]
- scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss (Dick Kennedy) [2021327]
- scsi: lpfc: Fix link down processing to address NULL pointer dereference (Dick Kennedy) [2021327]
- scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted (Dick Kennedy) [2021327]
- scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine (Dick Kennedy) [2021327]
- scsi: lpfc: Correct sysfs reporting of loop support after SFP status change (Dick Kennedy) [2021327]
- scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset (Dick Kennedy) [2021327]
- scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup() (Dick Kennedy) [2021327]
- x86/Kconfig: Do not enable AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT automatically (Prarit Bhargava) [2021200]
- ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring (Alexey Gladkov) [2018142]
- ucounts: Proper error handling in set_cred_ucounts (Alexey Gladkov) [2018142]
- ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_creds (Alexey Gladkov) [2018142]
- ucounts: Fix signal ucount refcounting (Alexey Gladkov) [2018142]
- x86/cpu: Fix migration safety with X86_BUG_NULL_SEL (Vitaly Kuznetsov) [2016959]
- ip6_gre: Revert "ip6_gre: add validation for csum_start" (Guillaume Nault) [2014993]
- ip_gre: validate csum_start only on pull (Guillaume Nault) [2014993]
- redhat/configs: enable KEXEC_IMAGE_VERIFY_SIG for RHEL (Coiby Xu) [1994858]
- redhat/configs: enable KEXEC_SIG for aarch64 RHEL (Coiby Xu) [1994858]
- kernel.spec: add bpf_testmod.ko to kselftests/bpf (Viktor Malik) [2006318 2006319]
- netfilter: Add deprecation notices for xtables (Phil Sutter) [1945179]
- redhat: Add mark_driver_deprecated() (Phil Sutter) [1945179]
* Tue Nov 23 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-20.el9]
- powerpc/svm: Don't issue ultracalls if !mem_encrypt_active() (Herton R. Krzesinski) [2025186]
* Fri Nov 19 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-19.el9]
- net: core: don't call SIOCBRADD/DELIF for non-bridge devices (Ivan Vecera) [2008927]
- net: bridge: fix ioctl old_deviceless bridge argument (Ivan Vecera) [2008927]
- net: bridge: fix ioctl locking (Ivan Vecera) [2008927]
- ethtool: Fix rxnfc copy to user buffer overflow (Ivan Vecera) [2008927]
- net: bonding: move ioctl handling to private ndo operation (Ivan Vecera) [2008927]
- net: bridge: move bridge ioctls out of .ndo_do_ioctl (Ivan Vecera) [2008927]
- net: socket: return changed ifreq from SIOCDEVPRIVATE (Ivan Vecera) [2008927]
- net: split out ndo_siowandev ioctl (Ivan Vecera) [2008927]
- dev_ioctl: split out ndo_eth_ioctl (Ivan Vecera) [2008927]
- dev_ioctl: pass SIOCDEVPRIVATE data separately (Ivan Vecera) [2008927]
- wan: cosa: remove dead cosa_net_ioctl() function (Ivan Vecera) [2008927]
- wan: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- ppp: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- sb1000: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- hippi: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- ip_tunnel: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- airo: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- hamradio: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- cxgb3: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- qeth: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- slip/plip: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- net: usb: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- fddi: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- eql: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- tehuti: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- hamachi: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- appletalk: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- bonding: use siocdevprivate (Ivan Vecera) [2008927]
- tulip: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- phonet: use siocdevprivate (Ivan Vecera) [2008927]
- bridge: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- hostap: use ndo_siocdevprivate (Ivan Vecera) [2008927]
- staging: wlan-ng: use siocdevprivate (Ivan Vecera) [2008927]
- staging: rtlwifi: use siocdevprivate (Ivan Vecera) [2008927]
- net: split out SIOCDEVPRIVATE handling from dev_ioctl (Ivan Vecera) [2008927]
- net: socket: rework compat_ifreq_ioctl() (Ivan Vecera) [2008927]
- net: socket: simplify dev_ifconf handling (Ivan Vecera) [2008927]
- net: socket: remove register_gifconf (Ivan Vecera) [2008927]
- net: socket: rework SIOC?IFMAP ioctls (Ivan Vecera) [2008927]
- ethtool: improve compat ioctl handling (Ivan Vecera) [2008927]
- compat: make linux/compat.h available everywhere (Ivan Vecera) [2008927]
* Thu Nov 18 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-18.el9]
- CI: Add template for baseline gcov build (c9s repos) (Michael Hofmann)
- PCI: vmd: depend on !UML (Myron Stowe) [1994932]
- PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU (Myron Stowe) [1994932]
- PCI: vmd: Assign a number to each VMD controller (Myron Stowe) [1994932]
- PCI: VMD: ACPI: Make ACPI companion lookup work for VMD bus (Myron Stowe) [1994932]
- swiotlb-xen: drop DEFAULT_NSLABS (Jerry Snitselaar) [2004348]
- swiotlb-xen: arrange to have buffer info logged (Jerry Snitselaar) [2004348]
- swiotlb-xen: drop leftover __ref (Jerry Snitselaar) [2004348]
- swiotlb-xen: limit init retries (Jerry Snitselaar) [2004348]
- swiotlb-xen: suppress certain init retries (Jerry Snitselaar) [2004348]
- swiotlb-xen: maintain slab count properly (Jerry Snitselaar) [2004348]
- swiotlb-xen: fix late init retry (Jerry Snitselaar) [2004348]
- swiotlb-xen: avoid double free (Jerry Snitselaar) [2004348]
- dma-debug: teach add_dma_entry() about DMA_ATTR_SKIP_CPU_SYNC (Jerry Snitselaar) [2004348]
- dma-debug: fix sg checks in debug_dma_map_sg() (Jerry Snitselaar) [2004348]
- dma-mapping: fix the kerneldoc for dma_map_sgtable() (Jerry Snitselaar) [2004348]
- dma-debug: prevent an error message from causing runtime problems (Jerry Snitselaar) [2004348]
- dma-mapping: fix the kerneldoc for dma_map_sg_attrs (Jerry Snitselaar) [2004348]
- iommu/vt-d: Drop "0x" prefix from PCI bus & device addresses (Jerry Snitselaar) [2004348]
- iommu: Clarify default domain Kconfig (Jerry Snitselaar) [2004348]
- iommu/vt-d: Fix a deadlock in intel_svm_drain_prq() (Jerry Snitselaar) [2004348]
- iommu/vt-d: Fix PASID leak in intel_svm_unbind_mm() (Jerry Snitselaar) [2004348]
- iommu/amd: Remove iommu_init_ga() (Jerry Snitselaar) [2004348]
- iommu/amd: Relocate GAMSup check to early_enable_iommus (Jerry Snitselaar) [2004348]
- iommu/io-pgtable: Abstract iommu_iotlb_gather access (Jerry Snitselaar) [2004348]
- iommu/vt-d: Add present bit check in pasid entry setup helpers (Jerry Snitselaar) [2004348]
- iommu/vt-d: Use pasid_pte_is_present() helper function (Jerry Snitselaar) [2004348]
- iommu/vt-d: Drop the kernel doc annotation (Jerry Snitselaar) [2004348]
- iommu/vt-d: Allow devices to have more than 32 outstanding PRs (Jerry Snitselaar) [1921363]
- iommu/vt-d: Preset A/D bits for user space DMA usage (Jerry Snitselaar) [2004348]
- iomm/vt-d: Enable Intel IOMMU scalable mode by default (Jerry Snitselaar) [2004348]
- iommu/vt-d: Refactor Kconfig a bit (Jerry Snitselaar) [2004348]
- iommu/vt-d: Remove unnecessary oom message (Jerry Snitselaar) [2004348]
- iommu/vt-d: Update the virtual command related registers (Jerry Snitselaar) [2004348]
- iommu: Allow enabling non-strict mode dynamically (Jerry Snitselaar) [2004348]
- iommu: Merge strictness and domain type configs (Jerry Snitselaar) [2004348]
- iommu: Only log strictness for DMA domains (Jerry Snitselaar) [2004348]
- iommu: Expose DMA domain strictness via sysfs (Jerry Snitselaar) [2004348]
- iommu: Express DMA strictness via the domain type (Jerry Snitselaar) [2004348]
- iommu/vt-d: Prepare for multiple DMA domain types (Jerry Snitselaar) [2004348]
- iommu/arm-smmu: Prepare for multiple DMA domain types (Jerry Snitselaar) [2004348]
- iommu/amd: Prepare for multiple DMA domain types (Jerry Snitselaar) [2004348]
- iommu: Introduce explicit type for non-strict DMA domains (Jerry Snitselaar) [2004348]
- iommu/io-pgtable: Remove non-strict quirk (Jerry Snitselaar) [2004348]
- iommu: Indicate queued flushes via gather data (Jerry Snitselaar) [2004348]
- iommu/dma: Remove redundant "!dev" checks (Jerry Snitselaar) [2004348]
- iommu/virtio: Drop IOVA cookie management (Jerry Snitselaar) [2004348]
- iommu/vt-d: Drop IOVA cookie management (Jerry Snitselaar) [2004348]
- iommu/arm-smmu: Drop IOVA cookie management (Jerry Snitselaar) [2004348]
- iommu/amd: Drop IOVA cookie management (Jerry Snitselaar) [2004348]
- iommu: Pull IOVA cookie management into the core (Jerry Snitselaar) [2004348]
- iommu/amd: Remove stale amd_iommu_unmap_flush usage (Jerry Snitselaar) [2004348]
- iommu/amd: Use only natural aligned flushes in a VM (Jerry Snitselaar) [2004348]
- iommu/amd: Sync once for scatter-gather operations (Jerry Snitselaar) [2004348]
- iommu/amd: Tailored gather logic for AMD (Jerry Snitselaar) [2004348]
- iommu: Factor iommu_iotlb_gather_is_disjoint() out (Jerry Snitselaar) [2004348]
- iommu: Improve iommu_iotlb_gather helpers (Jerry Snitselaar) [2004348]
- iommu/amd: Do not use flush-queue when NpCache is on (Jerry Snitselaar) [2004348]
- iommu/amd: Selective flush on unmap (Jerry Snitselaar) [2004348]
- iommu/amd: Fix printing of IOMMU events when rate limiting kicks in (Jerry Snitselaar) [2004348]
- iommu/amd: Convert from atomic_t to refcount_t on pasid_state->count (Jerry Snitselaar) [2004348]
- iommu/arm-smmu: Fix missing unlock on error in arm_smmu_device_group() (Jerry Snitselaar) [2004348]
- iommu/arm-smmu-v3: Stop pre-zeroing batch commands (Jerry Snitselaar) [2004348]
- iommu/arm-smmu-v3: Extract reusable function __arm_smmu_cmdq_skip_err() (Jerry Snitselaar) [2004348]
- iommu/arm-smmu-v3: Add and use static helper function arm_smmu_get_cmdq() (Jerry Snitselaar) [2004348]
- iommu/arm-smmu-v3: Add and use static helper function arm_smmu_cmdq_issue_cmd_with_sync() (Jerry Snitselaar) [2004348]
- iommu/arm-smmu-v3: Use command queue batching helpers to improve performance (Jerry Snitselaar) [2004348]
- iommu/arm-smmu: Optimize ->tlb_flush_walk() for qcom implementation (Jerry Snitselaar) [2004348]
- iommu/arm-smmu: Fix race condition during iommu_group creation (Jerry Snitselaar) [2004348]
- iommu: Fix race condition during default domain allocation (Jerry Snitselaar) [2004348]
- iommu/arm-smmu: Add clk_bulk_{prepare/unprepare} to system pm callbacks (Jerry Snitselaar) [2004348]
- iommu/arm-smmu-v3: Remove some unneeded init in arm_smmu_cmdq_issue_cmdlist() (Jerry Snitselaar) [2004348]
- iommu/arm-smmu-v3: Implement the map_pages() IOMMU driver callback (Jerry Snitselaar) [1971978]
- iommu/arm-smmu-v3: Implement the unmap_pages() IOMMU driver callback (Jerry Snitselaar) [1971978]
- iommu/vt-d: Move clflush'es from iotlb_sync_map() to map_pages() (Jerry Snitselaar) [1971978]
- iommu/vt-d: Implement map/unmap_pages() iommu_ops callback (Jerry Snitselaar) [1971978]
- iommu/vt-d: Report real pgsize bitmap to iommu core (Jerry Snitselaar) [1971978]
- iommu: Streamline iommu_iova_to_phys() (Jerry Snitselaar) [2004348]
- iommu: Remove mode argument from iommu_set_dma_strict() (Jerry Snitselaar) [2004348]
- redhat/configs: Use new iommu default dma config options (Jerry Snitselaar) [2004348]
- iommu/amd: Add support for IOMMU default DMA mode build options (Jerry Snitselaar) [2004348]
- iommu/vt-d: Add support for IOMMU default DMA mode build options (Jerry Snitselaar) [2004348]
- iommu: Enhance IOMMU default DMA mode build options (Jerry Snitselaar) [2004348]
- iommu: Print strict or lazy mode at init time (Jerry Snitselaar) [2004348]
- iommu: Deprecate Intel and AMD cmdline methods to enable strict mode (Jerry Snitselaar) [2004348]
- iommu/arm-smmu: Implement the map_pages() IOMMU driver callback (Jerry Snitselaar) [1971978]
- iommu/arm-smmu: Implement the unmap_pages() IOMMU driver callback (Jerry Snitselaar) [1971978]
- iommu/io-pgtable-arm-v7s: Implement arm_v7s_map_pages() (Jerry Snitselaar) [1971978]
- iommu/io-pgtable-arm-v7s: Implement arm_v7s_unmap_pages() (Jerry Snitselaar) [1971978]
- iommu/io-pgtable-arm: Implement arm_lpae_map_pages() (Jerry Snitselaar) [1971978]
- iommu/io-pgtable-arm: Implement arm_lpae_unmap_pages() (Jerry Snitselaar) [1971978]
- iommu/io-pgtable-arm: Prepare PTE methods for handling multiple entries (Jerry Snitselaar) [1971978]
- iommu/io-pgtable: Introduce map_pages() as a page table op (Jerry Snitselaar) [1971978]
- iommu/io-pgtable: Introduce unmap_pages() as a page table op (Jerry Snitselaar) [1971978]
- iommu: Add support for the map_pages() callback (Jerry Snitselaar) [1971978]
- iommu: Hook up '->unmap_pages' driver callback (Jerry Snitselaar) [1971978]
- iommu: Split 'addr_merge' argument to iommu_pgsize() into separate parts (Jerry Snitselaar) [1971978]
- iommu: Use bitmap to calculate page size in iommu_pgsize() (Jerry Snitselaar) [1971978]
- iommu: Add a map_pages() op for IOMMU drivers (Jerry Snitselaar) [1971978]
- iommu: Add an unmap_pages() op for IOMMU drivers (Jerry Snitselaar) [1971978]
- swiotlb: use depends on for DMA_RESTRICTED_POOL (Jerry Snitselaar) [2004348]
- swiotlb: Free tbl memory in swiotlb_exit() (Jerry Snitselaar) [2004348]
- swiotlb: Emit diagnostic in swiotlb_exit() (Jerry Snitselaar) [2004348]
- swiotlb: Convert io_default_tlb_mem to static allocation (Jerry Snitselaar) [2004348]
- swiotlb: add overflow checks to swiotlb_bounce (Jerry Snitselaar) [2004348]
- swiotlb: fix implicit debugfs declarations (Jerry Snitselaar) [2004348]
- swiotlb: Add restricted DMA pool initialization (Jerry Snitselaar) [2004348]
- redhat/configs: Add CONFIG_DMA_RESTRICTED_POOL (Jerry Snitselaar) [2004348]
- swiotlb: Add restricted DMA alloc/free support (Jerry Snitselaar) [2004348]
- swiotlb: Refactor swiotlb_tbl_unmap_single (Jerry Snitselaar) [2004348]
- swiotlb: Move alloc_size to swiotlb_find_slots (Jerry Snitselaar) [2004348]
- swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing (Jerry Snitselaar) [2004348]
- swiotlb: Update is_swiotlb_active to add a struct device argument (Jerry Snitselaar) [2004348]
- swiotlb: Update is_swiotlb_buffer to add a struct device argument (Jerry Snitselaar) [2004348]
- swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used (Jerry Snitselaar) [2004348]
- swiotlb: Refactor swiotlb_create_debugfs (Jerry Snitselaar) [2004348]
- swiotlb: Refactor swiotlb init functions (Jerry Snitselaar) [2004348]
- dma-mapping: make the global coherent pool conditional (Jerry Snitselaar) [2004348]
- dma-mapping: add a dma_init_global_coherent helper (Jerry Snitselaar) [2004348]
- dma-mapping: simplify dma_init_coherent_memory (Jerry Snitselaar) [2004348]
- dma-mapping: allow using the global coherent pool for !ARM (Jerry Snitselaar) [2004348]
- dma-direct: add support for dma_coherent_default_memory (Jerry Snitselaar) [2004348]
- dma-mapping: return an unsigned int from dma_map_sg{,_attrs} (Jerry Snitselaar) [2004348]
- dma-mapping: disallow .map_sg operations from returning zero on error (Jerry Snitselaar) [2004348]
- dma-mapping: return error code from dma_dummy_map_sg() (Jerry Snitselaar) [2004348]
- xen: swiotlb: return error code from xen_swiotlb_map_sg() (Jerry Snitselaar) [2004348]
- s390/pci: don't set failed sg dma_address to DMA_MAPPING_ERROR (Jerry Snitselaar) [2004348]
- s390/pci: return error code from s390_dma_map_sg() (Jerry Snitselaar) [2004348]
- powerpc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR (Jerry Snitselaar) [2004348]
- powerpc/iommu: return error code from .map_sg() ops (Jerry Snitselaar) [2004348]
- iommu/dma: return error code from iommu_dma_map_sg() (Jerry Snitselaar) [2004348]
- iommu: return full error code from iommu_map_sg[_atomic]() (Jerry Snitselaar) [2004348]
- dma-direct: return appropriate error code from dma_direct_map_sg() (Jerry Snitselaar) [2004348]
- dma-mapping: allow map_sg() ops to return negative error codes (Jerry Snitselaar) [2004348]
- dma-debug: fix debugfs initialization order (Jerry Snitselaar) [2004348]
- dma-debug: use memory_intersects() directly (Jerry Snitselaar) [2004348]
* Tue Nov 16 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-17.el9]
- net: mana: Support hibernation and kexec (Mohammed Gamal) [2011883]
- net: mana: Improve the HWC error handling (Mohammed Gamal) [2011883]
- net: mana: Report OS info to the PF driver (Mohammed Gamal) [2011883]
- net: mana: Fix the netdev_err()'s vPort argument in mana_init_port() (Mohammed Gamal) [2011883]
- net: mana: Allow setting the number of queues while the NIC is down (Mohammed Gamal) [2011883]
- net: mana: Fix error handling in mana_create_rxq() (Mohammed Gamal) [2011883]
- net: mana: Use kcalloc() instead of kzalloc() (Mohammed Gamal) [2011883]
- net: mana: Prefer struct_size over open coded arithmetic (Mohammed Gamal) [2011883]
- net: mana: Add WARN_ON_ONCE in case of CQE read overflow (Mohammed Gamal) [2011883]
- net: mana: Add support for EQ sharing (Mohammed Gamal) [2011883]
- net: mana: Move NAPI from EQ to CQ (Mohammed Gamal) [2011883]
- PCI: hv: Fix sleep while in non-sleep context when removing child devices from the bus (Mohammed Gamal) [2008571]
- objtool: Remove redundant 'len' field from struct section (C. Erastus Toe) [2002440]
- objtool: Make .altinstructions section entry size consistent (C. Erastus Toe) [2002440]
- s390/topology: fix topology information when calling cpu hotplug notifiers (Phil Auld) [2003998]
- fs: remove leftover comments from mandatory locking removal (Jeffrey Layton) [2017438]
- locks: remove changelog comments (Jeffrey Layton) [2017438]
- docs: fs: locks.rst: update comment about mandatory file locking (Jeffrey Layton) [2017438]
- Documentation: remove reference to now removed mandatory-locking doc (Jeffrey Layton) [2017438]
- locks: remove LOCK_MAND flock lock support (Jeffrey Layton) [2017438]
- fs: clean up after mandatory file locking support removal (Jeffrey Layton) [2017438]
- fs: remove mandatory file locking support (Jeffrey Layton) [2017438]
- fcntl: fix potential deadlock for &fasync_struct.fa_lock (Jeffrey Layton) [2017438]
- fcntl: fix potential deadlocks for &fown_struct.lock (Jeffrey Layton) [2017438]
- KVM: s390: Enable specification exception interpretation (Thomas Huth) [2001770]
- redhat/configs: enable CONFIG_BCMGENET as module (Joel Savitz) [2011025]
* Fri Nov 12 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-16.el9]
- CI: Add template for baseline gcov build for RHEL (Israel Santana Aleman)
- redhat/configs: Enable Nitro Enclaves on Aarch64 (Vitaly Kuznetsov) [2001582]
- nitro_enclaves: Add fixes for checkpatch blank line reports (Vitaly Kuznetsov) [2001582]
- nitro_enclaves: Add fixes for checkpatch spell check reports (Vitaly Kuznetsov) [2001582]
- nitro_enclaves: Add fixes for checkpatch match open parenthesis reports (Vitaly Kuznetsov) [2001582]
- nitro_enclaves: Update copyright statement to include 2021 (Vitaly Kuznetsov) [2001582]
- nitro_enclaves: Add fix for the kernel-doc report (Vitaly Kuznetsov) [2001582]
- nitro_enclaves: Update documentation for Arm64 support (Vitaly Kuznetsov) [2001582]
- nitro_enclaves: Enable Arm64 support (Vitaly Kuznetsov) [2001582]
- redhat/configs: Enable Hyper-V support on ARM (Vitaly Kuznetsov) [1949613]
- redhat/configs: enable CONFIG_INPUT_KEYBOARD for AARCH64 (Vitaly Kuznetsov) [1949613]
- Drivers: hv: Enable Hyper-V code to be built on ARM64 (Vitaly Kuznetsov) [1949613]
- arm64: efi: Export screen_info (Vitaly Kuznetsov) [1949613]
- arm64: hyperv: Initialize hypervisor on boot (Vitaly Kuznetsov) [1949613]
- arm64: hyperv: Add panic handler (Vitaly Kuznetsov) [1949613]
- arm64: hyperv: Add Hyper-V hypercall and register access utilities (Vitaly Kuznetsov) [1949613]
- PCI: hv: Turn on the host bridge probing on ARM64 (Vitaly Kuznetsov) [1949613]
- PCI: hv: Set up MSI domain at bridge probing time (Vitaly Kuznetsov) [1949613]
- PCI: hv: Set ->domain_nr of pci_host_bridge at probing time (Vitaly Kuznetsov) [1949613]
- PCI: hv: Generify PCI probing (Vitaly Kuznetsov) [1949613]
- arm64: PCI: Support root bridge preparation for Hyper-V (Vitaly Kuznetsov) [1949613]
- arm64: PCI: Restructure pcibios_root_bridge_prepare() (Vitaly Kuznetsov) [1949613]
- PCI: Support populating MSI domains of root buses via bridges (Vitaly Kuznetsov) [1949613]
- PCI: Introduce domain_nr in pci_host_bridge (Vitaly Kuznetsov) [1949613]
- drivers: hv: Decouple Hyper-V clock/timer code from VMbus drivers (Vitaly Kuznetsov) [1949613]
- Drivers: hv: Move Hyper-V misc functionality to arch-neutral code (Vitaly Kuznetsov) [1949613]
- Drivers: hv: Add arch independent default functions for some Hyper-V handlers (Vitaly Kuznetsov) [1949613]
- Drivers: hv: Make portions of Hyper-V init code be arch neutral (Vitaly Kuznetsov) [1949613]
- asm-generic/hyperv: Add missing #include of nmi.h (Vitaly Kuznetsov) [1949613]
- PCI: hv: Support for create interrupt v3 (Vitaly Kuznetsov) [1949613]
- x86_64: Enable Elkhart Lake Quadrature Encoder Peripheral support (Prarit Bhargava) [1874997]
* Thu Nov 11 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-15.el9]
- scsi: lpfc: Fix memory overwrite during FC-GS I/O abort handling (Dick Kennedy) [1879528]
- scsi: lpfc: Fix gcc -Wstringop-overread warning, again (Dick Kennedy) [1879528]
- scsi: lpfc: Use correct scnprintf() limit (Dick Kennedy) [1879528]
- scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn() (Dick Kennedy) [1879528]
- scsi: lpfc: Fix compilation errors on kernels with no CONFIG_DEBUG_FS (Dick Kennedy) [1879528]
- scsi: lpfc: Fix CPU to/from endian warnings introduced by ELS processing (Dick Kennedy) [1879528]
- scsi: lpfc: Update lpfc version to 14.0.0.2 (Dick Kennedy) [1879528]
- scsi: lpfc: Improve PBDE checks during SGL processing (Dick Kennedy) [1879528]
- scsi: lpfc: Zero CGN stats only during initial driver load and stat reset (Dick Kennedy) [1879528]
- scsi: lpfc: Fix I/O block after enabling managed congestion mode (Dick Kennedy) [1879528]
- scsi: lpfc: Adjust bytes received vales during cmf timer interval (Dick Kennedy) [1879528]
- scsi: lpfc: Fix EEH support for NVMe I/O (Dick Kennedy) [1879528]
- scsi: lpfc: Fix FCP I/O flush functionality for TMF routines (Dick Kennedy) [1879528]
- scsi: lpfc: Fix NVMe I/O failover to non-optimized path (Dick Kennedy) [1879528]
- scsi: lpfc: Don't remove ndlp on PRLI errors in P2P mode (Dick Kennedy) [1879528]
- scsi: lpfc: Fix rediscovery of tape device after LIP (Dick Kennedy) [1879528]
- scsi: lpfc: Fix hang on unload due to stuck fport node (Dick Kennedy) [1879528]
- scsi: lpfc: Fix premature rpi release for unsolicited TPLS and LS_RJT (Dick Kennedy) [1879528]
- scsi: lpfc: Don't release final kref on Fport node while ABTS outstanding (Dick Kennedy) [1879528]
- scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq() (Dick Kennedy) [1879528]
- scsi: fc: Add EDC ELS definition (Dick Kennedy) [1879528]
- scsi: lpfc: Copyright updates for 14.0.0.1 patches (Dick Kennedy) [1879528]
- scsi: lpfc: Update lpfc version to 14.0.0.1 (Dick Kennedy) [1879528]
- scsi: lpfc: Add bsg support for retrieving adapter cmf data (Dick Kennedy) [1879528]
- scsi: lpfc: Add cmf_info sysfs entry (Dick Kennedy) [1879528]
- scsi: lpfc: Add debugfs support for cm framework buffers (Dick Kennedy) [1879528]
- scsi: lpfc: Add support for maintaining the cm statistics buffer (Dick Kennedy) [1879528]
- scsi: lpfc: Add rx monitoring statistics (Dick Kennedy) [1879528]
- scsi: lpfc: Add support for the CM framework (Dick Kennedy) [1879528]
- scsi: lpfc: Add cmfsync WQE support (Dick Kennedy) [1879528]
- scsi: lpfc: Add support for cm enablement buffer (Dick Kennedy) [1879528]
- scsi: lpfc: Add cm statistics buffer support (Dick Kennedy) [1879528]
- scsi: lpfc: Add EDC ELS support (Dick Kennedy) [1879528]
- scsi: lpfc: Expand FPIN and RDF receive logging (Dick Kennedy) [1879528]
- scsi: lpfc: Add MIB feature enablement support (Dick Kennedy) [1879528]
- scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware (Dick Kennedy) [1879528]
- scsi: lpfc: Fix possible ABBA deadlock in nvmet_xri_aborted() (Dick Kennedy) [1879528]
- scsi: lpfc: Remove redundant assignment to pointer pcmd (Dick Kennedy) [1879528]
- scsi: lpfc: Copyright updates for 14.0.0.0 patches (Dick Kennedy) [1879528]
- scsi: lpfc: Update lpfc version to 14.0.0.0 (Dick Kennedy) [1879528]
- scsi: lpfc: Add 256 Gb link speed support (Dick Kennedy) [1879528]
- scsi: lpfc: Revise Topology and RAS support checks for new adapters (Dick Kennedy) [1879528]
- scsi: lpfc: Fix cq_id truncation in rq create (Dick Kennedy) [1879528]
- scsi: lpfc: Add PCI ID support for LPe37000/LPe38000 series adapters (Dick Kennedy) [1879528]
- scsi: lpfc: Copyright updates for 12.8.0.11 patches (Dick Kennedy) [1879528]
- scsi: lpfc: Update lpfc version to 12.8.0.11 (Dick Kennedy) [1879528]
- scsi: lpfc: Skip issuing ADISC when node is in NPR state (Dick Kennedy) [1879528]
- scsi: lpfc: Skip reg_vpi when link is down for SLI3 in ADISC cmpl path (Dick Kennedy) [1879528]
- scsi: lpfc: Call discovery state machine when handling PLOGI/ADISC completions (Dick Kennedy) [1879528]
- scsi: lpfc: Delay unregistering from transport until GIDFT or ADISC completes (Dick Kennedy) [1879528]
- scsi: lpfc: Enable adisc discovery after RSCN by default (Dick Kennedy) [1879528]
- scsi: lpfc: Use PBDE feature enabled bit to determine PBDE support (Dick Kennedy) [1879528]
- scsi: lpfc: Clear outstanding active mailbox during PCI function reset (Dick Kennedy) [1879528]
- scsi: lpfc: Fix KASAN slab-out-of-bounds in lpfc_unreg_rpi() routine (Dick Kennedy) [1879528]
- scsi: lpfc: Remove REG_LOGIN check requirement to issue an ELS RDF (Dick Kennedy) [1879528]
- scsi: lpfc: Fix memory leaks in error paths while issuing ELS RDF/SCR request (Dick Kennedy) [1879528]
- scsi: lpfc: Fix NULL ptr dereference with NPIV ports for RDF handling (Dick Kennedy) [1879528]
- scsi: lpfc: Keep NDLP reference until after freeing the IOCB after ELS handling (Dick Kennedy) [1879528]
- scsi: lpfc: Fix target reset handler from falsely returning FAILURE (Dick Kennedy) [1879528]
- scsi: lpfc: Discovery state machine fixes for LOGO handling (Dick Kennedy) [1879528]
- scsi: lpfc: Fix function description comments for vmid routines (Dick Kennedy) [1879528]
- scsi: lpfc: Improve firmware download logging (Dick Kennedy) [1879528]
- scsi: lpfc: Remove use of kmalloc() in trace event logging (Dick Kennedy) [1879528]
- scsi: lpfc: Fix NVMe support reporting in log message (Dick Kennedy) [1879528]
* Wed Nov 10 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-14.el9]
- evm: mark evm_fixmode as __ro_after_init (Bruno Meneguele) [2017160]
- IMA: remove -Wmissing-prototypes warning (Bruno Meneguele) [2017160]
- perf flamegraph: flamegraph.py script improvements (Michael Petlan) [2010271]
- redhat/configs/evaluate_configs: insert EMPTY tags at correct place (Jan Stancek) [2015082]
- redhat/configs/evaluate_configs: walk cfgvariants line by line (Jan Stancek) [2015082]
- redhat/configs: create a separate config for gcov options (Jan Stancek) [2015082]
- redhat/kernel.spec.template: don't hardcode gcov arches (Jan Stancek) [2015082]
- i40e: fix endless loop under rtnl (Stefan Assmann) [1992939]
- selftests/bpf: Use nanosleep tracepoint in perf buffer test (Jiri Olsa) [2006310]
- selftests/bpf: Fix possible/online index mismatch in perf_buffer test (Jiri Olsa) [2006310]
- selftests/bpf: Fix perf_buffer test on system with offline cpus (Jiri Olsa) [2006310]
- KVM: x86: Fix stack-out-of-bounds memory access from ioapic_write_indirect() (Vitaly Kuznetsov) [1965145]
- selftest/bpf: Switch recursion test to use htab_map_delete_elem (Jiri Olsa) [2006313]
* Mon Nov 08 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-13.el9]
- futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic() (Waiman Long) [2007032]
- futex: Prevent inconsistent state and exit race (Waiman Long) [2007032]
- locking/ww_mutex: Initialize waiter.ww_ctx properly (Waiman Long) [2007032]
- futex: Return error code instead of assigning it without effect (Waiman Long) [2007032]
- locking/rwbase: Take care of ordering guarantee for fastpath reader (Waiman Long) [2007032]
- locking/rwbase: Extract __rwbase_write_trylock() (Waiman Long) [2007032]
- locking/rwbase: Properly match set_and_save_state() to restore_state() (Waiman Long) [2007032]
- locking/rtmutex: Fix ww_mutex deadlock check (Waiman Long) [2007032]
- locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT (Waiman Long) [2007032]
- locking/rtmutex: Return success on deadlock for ww_mutex waiters (Waiman Long) [2007032]
- locking/rtmutex: Prevent spurious EDEADLK return caused by ww_mutexes (Waiman Long) [2007032]
- locking/rtmutex: Dequeue waiter on ww_mutex deadlock (Waiman Long) [2007032]
- locking/rtmutex: Dont dereference waiter lockless (Waiman Long) [2007032]
- locking/local_lock: Add PREEMPT_RT support (Waiman Long) [2007032]
- locking/spinlock/rt: Prepare for RT local_lock (Waiman Long) [2007032]
- locking/rtmutex: Add adaptive spinwait mechanism (Waiman Long) [2007032]
- locking/rtmutex: Implement equal priority lock stealing (Waiman Long) [2007032]
- preempt: Adjust PREEMPT_LOCK_OFFSET for RT (Waiman Long) [2007032]
- locking/rtmutex: Prevent lockdep false positive with PI futexes (Waiman Long) [2007032]
- futex: Prevent requeue_pi() lock nesting issue on RT (Waiman Long) [2007032]
- futex: Simplify handle_early_requeue_pi_wakeup() (Waiman Long) [2007032]
- futex: Reorder sanity checks in futex_requeue() (Waiman Long) [2007032]
- futex: Clarify comment in futex_requeue() (Waiman Long) [2007032]
- futex: Restructure futex_requeue() (Waiman Long) [2007032]
- futex: Correct the number of requeued waiters for PI (Waiman Long) [2007032]
- futex: Remove bogus condition for requeue PI (Waiman Long) [2007032]
- futex: Clarify futex_requeue() PI handling (Waiman Long) [2007032]
- futex: Clean up stale comments (Waiman Long) [2007032]
- futex: Validate waiter correctly in futex_proxy_trylock_atomic() (Waiman Long) [2007032]
- lib/test_lockup: Adapt to changed variables (Waiman Long) [2007032]
- locking/rtmutex: Add mutex variant for RT (Waiman Long) [2007032]
- locking/ww_mutex: Implement rtmutex based ww_mutex API functions (Waiman Long) [2007032]
- locking/rtmutex: Extend the rtmutex core to support ww_mutex (Waiman Long) [2007032]
- locking/ww_mutex: Add rt_mutex based lock type and accessors (Waiman Long) [2007032]
- locking/ww_mutex: Add RT priority to W/W order (Waiman Long) [2007032]
- locking/ww_mutex: Implement rt_mutex accessors (Waiman Long) [2007032]
- locking/ww_mutex: Abstract out internal lock accesses (Waiman Long) [2007032]
- locking/ww_mutex: Abstract out mutex types (Waiman Long) [2007032]
- locking/ww_mutex: Abstract out mutex accessors (Waiman Long) [2007032]
- locking/ww_mutex: Abstract out waiter enqueueing (Waiman Long) [2007032]
- locking/ww_mutex: Abstract out the waiter iteration (Waiman Long) [2007032]
- locking/ww_mutex: Remove the __sched annotation from ww_mutex APIs (Waiman Long) [2007032]
- locking/ww_mutex: Split out the W/W implementation logic into kernel/locking/ww_mutex.h (Waiman Long) [2007032]
- locking/ww_mutex: Split up ww_mutex_unlock() (Waiman Long) [2007032]
- locking/ww_mutex: Gather mutex_waiter initialization (Waiman Long) [2007032]
- locking/ww_mutex: Simplify lockdep annotations (Waiman Long) [2007032]
- locking/mutex: Make mutex::wait_lock raw (Waiman Long) [2007032]
- locking/ww_mutex: Move the ww_mutex definitions from <linux/mutex.h> into <linux/ww_mutex.h> (Waiman Long) [2007032]
- locking/mutex: Move the 'struct mutex_waiter' definition from <linux/mutex.h> to the internal header (Waiman Long) [2007032]
- locking/mutex: Consolidate core headers, remove kernel/locking/mutex-debug.h (Waiman Long) [2007032]
- locking/rtmutex: Squash !RT tasks to DEFAULT_PRIO (Waiman Long) [2007032]
- locking/rwlock: Provide RT variant (Waiman Long) [2007032]
- locking/spinlock: Provide RT variant (Waiman Long) [2007032]
- locking/rtmutex: Provide the spin/rwlock core lock function (Waiman Long) [2007032]
- locking/spinlock: Provide RT variant header: <linux/spinlock_rt.h> (Waiman Long) [2007032]
- locking/spinlock: Provide RT specific spinlock_t (Waiman Long) [2007032]
- locking/rtmutex: Reduce <linux/rtmutex.h> header dependencies, only include <linux/rbtree_types.h> (Waiman Long) [2007032]
- rbtree: Split out the rbtree type definitions into <linux/rbtree_types.h> (Waiman Long) [2007032]
- locking/lockdep: Reduce header dependencies in <linux/debug_locks.h> (Waiman Long) [2007032]
- locking/rtmutex: Prevent future include recursion hell (Waiman Long) [2007032]
- locking/spinlock: Split the lock types header, and move the raw types into <linux/spinlock_types_raw.h> (Waiman Long) [2007032]
- locking/rtmutex: Guard regular sleeping locks specific functions (Waiman Long) [2007032]
- locking/rtmutex: Prepare RT rt_mutex_wake_q for RT locks (Waiman Long) [2007032]
- locking/rtmutex: Use rt_mutex_wake_q_head (Waiman Long) [2007032]
- locking/rtmutex: Provide rt_wake_q_head and helpers (Waiman Long) [2007032]
- locking/rtmutex: Add wake_state to rt_mutex_waiter (Waiman Long) [2007032]
- locking/rwsem: Add rtmutex based R/W semaphore implementation (Waiman Long) [2007032]
- locking/rt: Add base code for RT rw_semaphore and rwlock (Waiman Long) [2007032]
- locking/rtmutex: Provide rt_mutex_base_is_locked() (Waiman Long) [2007032]
- locking/rtmutex: Provide rt_mutex_slowlock_locked() (Waiman Long) [2007032]
- locking/rtmutex: Split out the inner parts of 'struct rtmutex' (Waiman Long) [2007032]
- locking/rtmutex: Split API from implementation (Waiman Long) [2007032]
- locking/rtmutex: Switch to from cmpxchg_*() to try_cmpxchg_*() (Waiman Long) [2007032]
- locking/rtmutex: Convert macros to inlines (Waiman Long) [2007032]
- locking/rtmutex: Remove rt_mutex_is_locked() (Waiman Long) [2007032]
- sched/wake_q: Provide WAKE_Q_HEAD_INITIALIZER() (Waiman Long) [2007032]
- sched/core: Provide a scheduling point for RT locks (Waiman Long) [2007032]
- sched/core: Rework the __schedule() preempt argument (Waiman Long) [2007032]
- sched/wakeup: Prepare for RT sleeping spin/rwlocks (Waiman Long) [2007032]
- sched/wakeup: Reorganize the current::__state helpers (Waiman Long) [2007032]
- sched/wakeup: Introduce the TASK_RTLOCK_WAIT state bit (Waiman Long) [2007032]
- sched/wakeup: Split out the wakeup ->__state check (Waiman Long) [2007032]
- locking/rtmutex: Set proper wait context for lockdep (Waiman Long) [2007032]
- locking/local_lock: Add missing owner initialization (Waiman Long) [2007032]
- locking/mutex: Add MUTEX_WARN_ON (Waiman Long) [2007032]
- locking/mutex: Introduce __mutex_trylock_or_handoff() (Waiman Long) [2007032]
- locking/mutex: Fix HANDOFF condition (Waiman Long) [2007032]
- locking/mutex: Use try_cmpxchg() (Waiman Long) [2007032]
* Thu Nov 04 2021 Jarod Wilson <jarod@redhat.com> [5.14.0-12.el9]
- redhat: make dist-srpm-gcov add to BUILDOPTS (Jan Stancek) [2017628]
- redhat: Fix dist-srpm-gcov (Jan Stancek) [2017628]
- s390: report more CPU capabilities (Robin Dapp) [2012095]
- s390/disassembler: add instructions (Robin Dapp) [2012095]
- audit: move put_tree() to avoid trim_trees refcount underflow and UAF (Richard Guy Briggs) [1985904]
- libbpf: Properly ignore STT_SECTION symbols in legacy map definitions (Jiri Olsa) [1998266]
- libbpf: Ignore STT_SECTION symbols in 'maps' section (Jiri Olsa) [1998266]
- selftests, bpf: test_lwt_ip_encap: Really disable rp_filter (Jiri Benc) [2006328]
* Thu Oct 28 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-11.el9]
- selinux: remove the SELinux lockdown implementation (Ondrej Mosnacek) [1940843 1945581]
- bpf: Fix integer overflow in prealloc_elems_and_freelist() (Yauheni Kaliuta) [2010494] {CVE-2021-41864}
- seltests: bpf: test_tunnel: Use ip neigh (Jiri Benc) [2006326]
* Tue Oct 26 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-10.el9]
- block: return ELEVATOR_DISCARD_MERGE if possible (Ming Lei) [1991958]
- blk-mq: avoid to iterate over stale request (Ming Lei) [2009110]
- redhat/configs: enable CONFIG_IMA_WRITE_POLICY (Bruno Meneguele) [2006320]
- CI: Update deprecated configs (Veronika Kabatova)
* Wed Oct 20 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-9.el9]
- powerpc/pseries: Prevent free CPU ids being reused on another node (Desnes A. Nunes do Rosario) [2004809]
- pseries/drmem: update LMBs after LPM (Desnes A. Nunes do Rosario) [2004809]
- powerpc/numa: Consider the max NUMA node for migratable LPAR (Desnes A. Nunes do Rosario) [2004809]
- selftests: bpf: disable test_lirc_mode2 (Jiri Benc) [2006359]
- selftests: bpf: disable test_doc_build.sh (Jiri Benc) [2006359]
- selftests: bpf: define SO_RCVTIMEO and SO_SNDTIMEO properly for ppc64le (Jiri Benc) [2006359]
- selftests: bpf: skip FOU tests in test_tc_tunnel (Jiri Benc) [2006359]
- selftests: bpf: disable test_seg6_loop test (Jiri Benc) [2006359]
- selftests: bpf: disable test_lwt_seg6local (Jiri Benc) [2006359]
- selftests: bpf: disable test_bpftool_build.sh (Jiri Benc) [2006359]
- selftests: add option to skip specific tests in RHEL (Jiri Benc) [2006359]
* Fri Oct 15 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-8.el9]
- selftests/powerpc: Add scv versions of the basic TM syscall tests (Desnes A. Nunes do Rosario) [1986651]
- powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state (Desnes A. Nunes do Rosario) [1986651]
- mm/swap: consider max pages in iomap_swapfile_add_extent (Carlos Maiolino) [2005191]
- platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake PCH (David Arcari) [2007707]
- platform/x86/intel: pmc/core: Add Alder Lake low power mode support for pmc core (David Arcari) [2007707]
- platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR) support to Alder Lake (David Arcari) [2007707]
- platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver (David Arcari) [2007707]
- platform/x86: intel_pmc_core: Move to intel sub-directory (David Arcari) [2007707]
- platform/x86: intel_pmc_core: Prevent possibile overflow (David Arcari) [2007707]
- Clean-up CONFIG_X86_PLATFORM_DRIVERS_INTEL (David Arcari) [2007707]
- KVM: nVMX: Filter out all unsupported controls when eVMCS was activated (Vitaly Kuznetsov) [2001912]
- ipc: remove memcg accounting for sops objects in do_semtimedop() (Rafael Aquini) [1999707] {CVE-2021-3759}
- memcg: enable accounting of ipc resources (Rafael Aquini) [1999707] {CVE-2021-3759}
- redhat: BUILDID parameter must come last in genspec.sh (Herton R. Krzesinski)
- redhat/Makefile.variables: Set INCLUDE_FEDORA_FILES to 0 (Prarit Bhargava) [2009545]
- redhat: Remove fedora configs directories and files. (Prarit Bhargava) [2009545]
- redhat/kernel.spec.template: Cleanup source numbering (Prarit Bhargava) [2009545]
- redhat/kernel.spec.template: Reorganize RHEL and Fedora specific files (Prarit Bhargava) [2009545]
- redhat/kernel.spec.template: Add include_fedora and include_rhel variables (Prarit Bhargava) [2009545]
- redhat/Makefile: Make kernel-local global (Prarit Bhargava) [2009545]
- redhat/Makefile: Use flavors file (Prarit Bhargava) [2009545]
* Mon Oct 11 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-7.el9]
- redhat: Enable Nitro Enclaves driver on x86 for real (Vitaly Kuznetsov) [2011739]
- redhat/.gitignore: Add rhel9 KABI files (Prarit Bhargava) [2009489]
- hwmon: (k10temp) Add support for yellow carp (David Arcari) [1987069]
- hwmon: (k10temp) Rework the temperature offset calculation (David Arcari) [1987069]
- hwmon: (k10temp) Don't show Tdie for all Zen/Zen2/Zen3 CPU/APU (David Arcari) [1987069]
- hwmon: (k10temp) Add additional missing Zen2 and Zen3 APUs (David Arcari) [1987069]
- hwmon: (k10temp) support Zen3 APUs (David Arcari) [1987069]
- selinux,smack: fix subjective/objective credential use mixups (Ondrej Mosnacek) [2008145]
- redhat: kernel.spec: selftests: abort on build failure (Jiri Benc) [2004012]
- Revert "bpf, selftests: Disable tests that need clang13" (Jiri Benc) [2004012]
- selftests, bpf: Fix makefile dependencies on libbpf (Jiri Benc) [2004012]
* Fri Oct 08 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-6.el9]
- pinctrl: Bulk conversion to generic_handle_domain_irq() (David Arcari) [2000232]
- pinctrl: amd: Handle wake-up interrupt (David Arcari) [2000232]
- pinctrl: amd: Add irq field data (David Arcari) [2000232]
- Revert "redhat: define _rhel variable because pesign macro now needs it" (Jan Stancek)
- redhat: switch secureboot kernel image signing to release keys (Jan Stancek)
- redhat/configs: Disable FIREWIRE (Prarit Bhargava) [1871862]
- Enable e1000 in rhel9 as unsupported (Ken Cox) [2002344]
* Mon Oct 04 2021 Jan Stancek <jstancek@redhat.com> [5.14.0-1.6.1.el9]
- Revert "redhat: define _rhel variable because pesign macro now needs it" (Jan Stancek)
- redhat: switch secureboot kernel image signing to release keys (Jan Stancek)
- redhat/configs: Disable FIREWIRE (Prarit Bhargava) [1871862]
- Enable e1000 in rhel9 as unsupported (Ken Cox) [2002344]
* Thu Sep 30 2021 Herton R. Krzesinski <herton@redhat.com> [5.14.0-5.el9]
- redhat/configs: enable CONFIG_SQUASHFS_ZSTD which is already enabled in Fedora 34 (Tao Liu) [1998953]
- fs: dlm: fix return -EINTR on recovery stopped (Alexander Aring) [2004213]
- redhat: replace redhatsecureboot303 signing key with redhatsecureboot601 (Jan Stancek) [2002499]
- redhat: define _rhel variable because pesign macro now needs it (Jan Stancek) [2002499]
- redhat: drop certificates that were deprecated after GRUB's BootHole flaw (Jan Stancek) [1994849]
- redhat: correct file name of redhatsecurebootca1 (Jan Stancek) [2002499]
- redhat: align file names with names of signing keys for ppc and s390 (Jan Stancek) [2002499]
- redhat: restore sublevel in changelog (Jan Stancek)
- fs: dlm: avoid comms shutdown delay in release_lockspace (Alexander Aring) [1994749]
- redhat/configs: Enable CONFIG_BLK_CGROUP_IOLATENCY & CONFIG_BLK_CGROUP_FC_APPID (Waiman Long) [1996675]
- redhat/configs: remove conflicting SYSTEM_BLACKLIST_KEYRING (Bruno Meneguele) [2002350]
- Enable "inter server to server" NFSv4.2 COPY (Steve Dickson) [1487367]
* Wed Sep 29 2021 Jan Stancek <jstancek@redhat.com> [5.14.0-1.5.1.el9]
- fs: dlm: fix return -EINTR on recovery stopped (Alexander Aring) [2004213]
- redhat/configs: Update configs for secure IPL (Claudio Imbrenda) [1976884]
- redhat: replace redhatsecureboot303 signing key with redhatsecureboot601 (Jan Stancek) [2002499]
- redhat: define _rhel variable because pesign macro now needs it (Jan Stancek) [2002499]
- redhat: drop certificates that were deprecated after GRUB's BootHole flaw (Jan Stancek) [1994849]
- redhat: correct file name of redhatsecurebootca1 (Jan Stancek) [2002499]
- redhat: align file names with names of signing keys for ppc and s390 (Jan Stancek) [2002499]
* Mon Sep 27 2021 Jan Stancek <jstancek@redhat.com> [5.14.0-1.4.1.el9]
- redhat: restore sublevel in changelog (Jan Stancek)
- fs: dlm: avoid comms shutdown delay in release_lockspace (Alexander Aring) [1994749]
- redhat/configs: Enable CONFIG_BLK_CGROUP_IOLATENCY & CONFIG_BLK_CGROUP_FC_APPID (Waiman Long) [1996675]
* Wed Sep 22 2021 Herton R. Krzesinski <herton@redhat.com> [5.14-4.el9]
- Drivers: hv: vmbus: Fix kernel crash upon unbinding a device from uio_hv_generic driver (Vitaly Kuznetsov) [1999535]
- ipc: replace costly bailout check in sysvipc_find_ipc() (Rafael Aquini) [1987130 2003270] {CVE-2021-3669}
- redhat/configs: Disable CONFIG_DRM_VMWGFX on aarch64 (Michel Dänzer) [1996993]
- redhat: set USE_DIST_IN_SOURCE=1 for 9.0-beta (Jan Stancek)
- redhat: add option to use DIST tag in sources (Jan Stancek)
- CI: Enable notification messages for RHEL9 (Veronika Kabatova)
- CI: Enable private pipelines for RT branches (Veronika Kabatova)
- CI: Remove ARK leftovers (Veronika Kabatova)
- redhat: add *-matched meta packages to rpminspect emptyrpm config (Herton R. Krzesinski)
- gfs2: Don't call dlm after protocol is unmounted (Bob Peterson) [1988451]
- gfs2: don't stop reads while withdraw in progress (Bob Peterson) [1988451]
- gfs2: Mark journal inodes as "don't cache" (Bob Peterson) [1988451]
- cgroup/cpuset: Avoid memory migration when nodemasks match (Waiman Long) [1980430]
- cgroup/cpuset: Enable memory migration for cpuset v2 (Waiman Long) [1980430]
- iscsi_ibft: Fix isa_bus_to_virt not working under ARM (Maurizio Lombardi) [1963801]
- x86/setup: Explicitly include acpi.h (Maurizio Lombardi) [1963801]
- iscsi_ibft: fix warning in reserve_ibft_region() (Maurizio Lombardi) [1963801]
- iscsi_ibft: fix crash due to KASLR physical memory remapping (Maurizio Lombardi) [1963801]
- redhat: fix chronological order in the changelog file (Herton R. Krzesinski)
* Wed Sep 22 2021 Jan Stancek <jstancek@redhat.com> [5.14.0-1.3.1.el9]
- redhat/configs: remove conflicting SYSTEM_BLACKLIST_KEYRING (Bruno Meneguele) [2002350]
- Enable "inter server to server" NFSv4.2 COPY (Steve Dickson) [1487367]
* Fri Sep 17 2021 Jan Stancek <jstancek@redhat.com> [5.14-1.2.1.el9]
- redhat/configs: Disable CONFIG_DRM_VMWGFX on aarch64 (Michel Dänzer) [1996993]
- redhat: set USE_DIST_IN_SOURCE=1 for 9.0-beta (Jan Stancek)
- redhat: add option to use DIST tag in sources (Jan Stancek)
- CI: Enable notification messages for RHEL9 (Veronika Kabatova)
- CI: Enable private pipelines for RT branches (Veronika Kabatova)
- CI: Remove ARK leftovers (Veronika Kabatova)
- redhat: add *-matched meta packages to rpminspect emptyrpm config (Herton R. Krzesinski)
- gfs2: Don't call dlm after protocol is unmounted (Bob Peterson) [1988451]
- gfs2: don't stop reads while withdraw in progress (Bob Peterson) [1988451]
- gfs2: Mark journal inodes as "don't cache" (Bob Peterson) [1988451]
- cgroup/cpuset: Avoid memory migration when nodemasks match (Waiman Long) [1980430]
- cgroup/cpuset: Enable memory migration for cpuset v2 (Waiman Long) [1980430]
- iscsi_ibft: Fix isa_bus_to_virt not working under ARM (Maurizio Lombardi) [1963801]
- x86/setup: Explicitly include acpi.h (Maurizio Lombardi) [1963801]
- iscsi_ibft: fix warning in reserve_ibft_region() (Maurizio Lombardi) [1963801]
- iscsi_ibft: fix crash due to KASLR physical memory remapping (Maurizio Lombardi) [1963801]
* Thu Sep 16 2021 Herton R. Krzesinski <herton@redhat.com> [5.14-3]
- misc/pvpanic-pci: Allow automatic loading (Eric Auger) [1977192]
- md/raid10: Remove unnecessary rcu_dereference in raid10_handle_discard (Nigel Croxon) [1965294]
- rcu: Avoid unneeded function call in rcu_read_unlock() (Waiman Long) [1998549]
- Enable bridge jobs for scratch pipelines (Michael Hofmann)
- CI: use 9.0-beta-rt branch for -rt pipeline (Jan Stancek)
- crypto: ccp - Add support for new CCP/PSP device ID (Vladis Dronov) [1987099]
- crypto: ccp - shutdown SEV firmware on kexec (Vladis Dronov) [1987099]
* Tue Sep 14 2021 Jan Stancek <jstancek@redhat.com> [5.14-1.1.1]
- md/raid10: Remove unnecessary rcu_dereference in raid10_handle_discard (Nigel Croxon) [1965294]
- rcu: Avoid unneeded function call in rcu_read_unlock() (Waiman Long) [1998549]
* Mon Sep 13 2021 Herton R. Krzesinski <herton@redhat.com> [5.14-2]
- redhat: update branches/targets after 9 Beta fork (Herton R. Krzesinski)
- hv_utils: Set the maximum packet size for VSS driver to the length of the receive buffer (Vitaly Kuznetsov) [1996628]
- Enable bridge jobs for scratch pipelines (Michael Hofmann)
* Mon Aug 30 2021 Herton R. Krzesinski <herton@redhat.com> [5.14-1]
- redhat: drop Patchlist.changelog for RHEL (Jan Stancek) [1997494]
- redhat: update Makefile.variables for centos/rhel9 fork (Herton R. Krzesinski)
- redhat: add support for stream profile in koji/brew (Herton R. Krzesinski)
- redhat: make DIST default to .el9 (Herton R. Krzesinski)
- redhat: set default values in Makefiles for RHEL 9 Beta (Jan Stancek) [1997494]
- arm64: use common CONFIG_MAX_ZONEORDER for arm kernel (Mark Salter)
- Create Makefile.variables for a single point of configuration change (Justin M. Forbes)
- rpmspec: drop traceevent files instead of just excluding them from files list (Herton R. Krzesinski) [1967640]
- redhat/config: Enablement of CONFIG_PAPR_SCM for PowerPC (Gustavo Walbon) [1962936]
- Attempt to fix Intel PMT code (David Arcari)
- CI: Enable realtime branch testing (Veronika Kabatova)
- CI: Enable realtime checks for c9s and RHEL9 (Veronika Kabatova)
- [fs] dax: mark tech preview (Bill O'Donnell)
- ark: wireless: enable all rtw88 pcie wirless variants (Peter Robinson)
- wireless: rtw88: move debug options to common/debug (Peter Robinson)
- fedora: minor PTP clock driver cleanups (Peter Robinson)
- common: x86: enable VMware PTP support on ark (Peter Robinson)
- arm64: dts: rockchip: Disable CDN DP on Pinebook Pro (Matthias Brugger)
- arm64: dts: rockchip: Setup USB typec port as datarole on (Dan Johansen)
- [scsi] megaraid_sas: re-add certain pci-ids (Tomas Henzl)
- xfs: drop experimental warnings for bigtime and inobtcount (Bill O'Donnell) [1995321]
- Disable liquidio driver on ark/rhel (Herton R. Krzesinski) [1993393]
- More Fedora config updates (Justin M. Forbes)
- Fedora config updates for 5.14 (Justin M. Forbes)
- CI: Rename ARK CI pipeline type (Veronika Kabatova)
- CI: Finish up c9s config (Veronika Kabatova)
- CI: Update ppc64le config (Veronika Kabatova)
- CI: use more templates (Veronika Kabatova)
- Filter updates for aarch64 (Justin M. Forbes)
- increase CONFIG_NODES_SHIFT for aarch64 (Chris von Recklinghausen) [1890304]
- redhat: configs: Enable CONFIG_WIRELESS_HOTKEY (Hans de Goede)
- redhat/configs: Update CONFIG_NVRAM (Desnes A. Nunes do Rosario) [1988254]
- common: serial: build in SERIAL_8250_LPSS for x86 (Peter Robinson)
- powerpc: enable CONFIG_FUNCTION_PROFILER (Diego Domingos) [1831065]
- crypto: rng - Override drivers/char/random in FIPS mode (Herbert Xu)
- random: Add hook to override device reads and getrandom(2) (Herbert Xu)
- redhat/configs: Disable Soft-RoCE driver (Kamal Heib)
- redhat/configs/evaluate_configs: Update help output (Prarit Bhargava)
- redhat/configs: Double MAX_LOCKDEP_CHAINS (Justin M. Forbes)
- fedora: configs: Fix WM5102 Kconfig (Hans de Goede)
- powerpc: enable CONFIG_POWER9_CPU (Diego Domingos) [1876436]
- redhat/configs: Fix CONFIG_VIRTIO_IOMMU to 'y' on aarch64 (Eric Auger) [1972795]
- filter-modules.sh: add more sound modules to filter (Jaroslav Kysela)
- redhat/configs: sound configuration cleanups and updates (Jaroslav Kysela)
- common: Update for CXL (Compute Express Link) configs (Peter Robinson)
- redhat: configs: disable CRYPTO_SM modules (Herton R. Krzesinski) [1990040]
- Remove fedora version of the LOCKDEP_BITS, we should use common (Justin M. Forbes)
- Re-enable sermouse for x86 (rhbz 1974002) (Justin M. Forbes)
- Fedora 5.14 configs round 1 (Justin M. Forbes)
- redhat: add gating configuration for centos stream/rhel9 (Herton R. Krzesinski)
- x86: configs: Enable CONFIG_TEST_FPU for debug kernels (Vitaly Kuznetsov) [1988384]
- redhat/configs: Move CHACHA and POLY1305 to core kernel to allow BIG_KEYS=y (root) [1983298]
- kernel.spec: fix build of samples/bpf (Jiri Benc)
- Enable OSNOISE_TRACER and TIMERLAT_TRACER (Jerome Marchand) [1979379]
- rpmspec: switch iio and gpio tools to use tools_make (Herton R. Krzesinski) [1956988]
- configs/process_configs.sh: Handle config items with no help text (Patrick Talbert)
- fedora: sound config updates for 5.14 (Peter Robinson)
- fedora: Only enable FSI drivers on POWER platform (Peter Robinson)
- The CONFIG_RAW_DRIVER has been removed from upstream (Peter Robinson)
- fedora: updates for 5.14 with a few disables for common from pending (Peter Robinson)
- fedora: migrate from MFD_TPS68470 -> INTEL_SKL_INT3472 (Peter Robinson)
- fedora: Remove STAGING_GASKET_FRAMEWORK (Peter Robinson)
- Fedora: move DRM_VMWGFX configs from ark -> common (Peter Robinson)
- fedora: arm: disabled unused FB drivers (Peter Robinson)
- fedora: don't enable FB_VIRTUAL (Peter Robinson)
- redhat/configs: Double MAX_LOCKDEP_ENTRIES (Waiman Long) [1940075]
- rpmspec: fix verbose output on kernel-devel installation (Herton R. Krzesinski) [1981406]
- Build Fedora x86s kernels with bytcr-wm5102 (Marius Hoch)
- Deleted redhat/configs/fedora/generic/x86/CONFIG_FB_HYPERV (Patrick Lang)
- rpmspec: correct the ghost initramfs attributes (Herton R. Krzesinski) [1977056]
- rpmspec: amend removal of depmod created files to include modules.builtin.alias.bin (Herton R. Krzesinski) [1977056]
- configs: remove duplicate CONFIG_DRM_HYPERV file (Patrick Talbert)
- CI: use common code for merge and release (Don Zickus)
- rpmspec: add release string to kernel doc directory name (Jan Stancek)
- redhat/configs: Add CONFIG_INTEL_PMT_CRASHLOG (Michael Petlan) [1880486]
- redhat/configs: Add CONFIG_INTEL_PMT_TELEMETRY (Michael Petlan) [1880486]
- redhat/configs: Add CONFIG_MFD_INTEL_PMT (Michael Petlan) [1880486]
- redhat/configs: enable CONFIG_BLK_DEV_ZONED (Ming Lei) [1638087]
- Add --with clang_lto option to build the kernel with Link Time Optimizations (Tom Stellard)
- common: disable DVB_AV7110 and associated pieces (Peter Robinson)
- Fix fedora-only config updates (Don Zickus)
- Fedor config update for new option (Justin M. Forbes)
- redhat/configs: Enable stmmac NIC for x86_64 (Mark Salter)
- all: hyperv: use the DRM driver rather than FB (Peter Robinson)
- all: hyperv: unify the Microsoft HyperV configs (Peter Robinson)
- all: VMWare: clean up VMWare configs (Peter Robinson)
- Update CONFIG_ARM_FFA_TRANSPORT (Patrick Talbert)
- CI: Handle all mirrors (Veronika Kabatova)
- Turn on CONFIG_STACKTRACE for s390x zfpcdump kernels (Justin M. Forbes)
- arm64: switch ark kernel to 4K pagesize (Mark Salter)
- Disable AMIGA_PARTITION and KARMA_PARTITION (Prarit Bhargava) [1802694]
- all: unify and cleanup i2c TPM2 modules (Peter Robinson)
- redhat/configs: Set CONFIG_VIRTIO_IOMMU on aarch64 (Eric Auger) [1972795]
- redhat/configs: Disable CONFIG_RT_GROUP_SCHED in rhel config (Phil Auld)
- redhat/configs: enable KEXEC_SIG which is already enabled in RHEL8 for s390x and x86_64 (Coiby Xu) [1976835]
- rpmspec: do not BuildRequires bpftool on noarch (Herton R. Krzesinski)
- redhat/configs: disable {IMA,EVM}_LOAD_X509 (Bruno Meneguele) [1977529]
- redhat: add secureboot CA certificate to trusted kernel keyring (Bruno Meneguele)
- redhat/configs: enable IMA_ARCH_POLICY for aarch64 and s390x (Bruno Meneguele)
- redhat/configs: Enable CONFIG_MLXBF_GIGE on aarch64 (Alaa Hleihel) [1858599]
- common: enable STRICT_MODULE_RWX everywhere (Peter Robinson)
- COMMON_CLK_STM32MP157_SCMI is bool and selects COMMON_CLK_SCMI (Justin M. Forbes)
- kernel.spec: Add kernel{,-debug}-devel-matched meta packages (Timothée Ravier)
- Turn off with_selftests for Fedora (Justin M. Forbes)
- Don't build bpftool on Fedora (Justin M. Forbes)
- Fix location of syscall scripts for kernel-devel (Justin M. Forbes)
- fedora: arm: Enable some i.MX8 options (Peter Robinson)
- Enable Landlock for Fedora (Justin M. Forbes)
- Filter update for Fedora aarch64 (Justin M. Forbes)
- rpmspec: only build debug meta packages where we build debug ones (Herton R. Krzesinski)
- rpmspec: do not BuildRequires bpftool on nobuildarches (Herton R. Krzesinski)
- redhat/configs: Consolidate CONFIG_HMC_DRV in the common s390x folder (Thomas Huth) [1976270]
- redhat/configs: Consolidate CONFIG_EXPOLINE_OFF in the common folder (Thomas Huth) [1976270]
- redhat/configs: Move CONFIG_HW_RANDOM_S390 into the s390x/ subfolder (Thomas Huth) [1976270]
- redhat/configs: Disable CONFIG_HOTPLUG_PCI_SHPC in the Fedora settings (Thomas Huth) [1976270]
- redhat/configs: Remove the non-existent CONFIG_NO_BOOTMEM switch (Thomas Huth) [1976270]
- redhat/configs: Compile the virtio-console as a module on s390x (Thomas Huth) [1976270]
- redhat/configs: Enable CONFIG_S390_CCW_IOMMU and CONFIG_VFIO_CCW for ARK, too (Thomas Huth) [1976270]
- Revert "Merge branch 'ec_fips' into 'os-build'" (Vladis Dronov) [1947240]
- Fix typos in fedora filters (Justin M. Forbes)
- More filtering for Fedora (Justin M. Forbes)
- Fix Fedora module filtering for spi-altera-dfl (Justin M. Forbes)
- Fedora 5.13 config updates (Justin M. Forbes)
- fedora: cleanup TCG_TIS_I2C_CR50 (Peter Robinson)
- fedora: drop duplicate configs (Peter Robinson)
- More Fedora config updates for 5.13 (Justin M. Forbes)
- redhat/configs: Enable needed drivers for BlueField SoC on aarch64 (Alaa Hleihel) [1858592 1858594 1858596]
- redhat: Rename mod-blacklist.sh to mod-denylist.sh (Prarit Bhargava)
- redhat/configs: enable CONFIG_NET_ACT_MPLS (Marcelo Ricardo Leitner)
- configs: Enable CONFIG_DEBUG_KERNEL for zfcpdump (Jiri Olsa)
- kernel.spec: Add support to use vmlinux.h (Don Zickus)
- spec: Add vmlinux.h to kernel-devel package (Jiri Olsa)
- Turn off DRM_XEN_FRONTEND for Fedora as we had DRM_XEN off already (Justin M. Forbes)
- Fedora 5.13 config updates pt 3 (Justin M. Forbes)
- all: enable ath11k wireless modules (Peter Robinson)
- all: Enable WWAN and associated MHI bus pieces (Peter Robinson)
- spec: Enable sefltests rpm build (Jiri Olsa)
- spec: Allow bpf selftest/samples to fail (Jiri Olsa)
- bpf, selftests: Disable tests that need clang13 (Toke Høiland-Jørgensen)
- kvm: Add kvm_stat.service file and kvm_stat logrotate config to the tools (Jiri Benc)
- kernel.spec: Add missing source files to kernel-selftests-internal (Jiri Benc)
- kernel.spec: selftests: add net/forwarding to TARGETS list (Jiri Benc)
- kernel.spec: selftests: add build requirement on libmnl-devel (Jiri Benc)
- kernel.spec: add action.o to kernel-selftests-internal (Jiri Benc)
- kernel.spec: avoid building bpftool repeatedly (Jiri Benc)
- kernel.spec: selftests require python3 (Jiri Benc)
- kernel.spec: skip selftests that failed to build (Jiri Benc)
- kernel.spec: fix installation of bpf selftests (Jiri Benc)
- redhat: fix samples and selftests make options (Jiri Benc)
- kernel.spec: enable mptcp selftests for kernel-selftests-internal (Jiri Benc)
- kernel.spec: Do not export shared objects from libexecdir to RPM Provides (Jiri Benc)
- kernel.spec: add missing dependency for the which package (Jiri Benc)
- kernel.spec: add netfilter selftests to kernel-selftests-internal (Jiri Benc)
- kernel.spec: move slabinfo and page_owner_sort debuginfo to tools-debuginfo (Jiri Benc)
- kernel.spec: package and ship VM tools (Jiri Benc)
- configs: enable CONFIG_PAGE_OWNER (Jiri Benc)
- kernel.spec: add coreutils (Jiri Benc)
- kernel.spec: add netdevsim driver selftests to kernel-selftests-internal (Jiri Benc)
- redhat/Makefile: Clean out the --without flags from the baseonly rule (Jiri Benc)
- kernel.spec: Stop building unnecessary rpms for baseonly builds (Jiri Benc)
- kernel.spec: disable more kabi switches for gcov build (Jiri Benc)
- kernel.spec: Rename kabi-dw base (Jiri Benc)
- kernel.spec: Fix error messages during build of zfcpdump kernel (Jiri Benc)
- kernel.spec: perf: remove bpf examples (Jiri Benc)
- kernel.spec: selftests should not depend on modules-internal (Jiri Benc)
- kernel.spec: build samples (Jiri Benc)
- kernel.spec: tools: sync missing options with RHEL 8 (Jiri Benc)
- redhat/configs: nftables: Enable extra flowtable symbols (Phil Sutter)
- redhat/configs: Sync netfilter options with RHEL8 (Phil Sutter)
- Fedora 5.13 config updates pt 2 (Justin M. Forbes)
- Move CONFIG_ARCH_INTEL_SOCFPGA up a level for Fedora (Justin M. Forbes)
- fedora: enable the Rockchip rk3399 pcie drivers (Peter Robinson)
- Fedora 5.13 config updates pt 1 (Justin M. Forbes)
- Fix version requirement from opencsd-devel buildreq (Justin M. Forbes)
- configs/ark/s390: set CONFIG_MARCH_Z14 and CONFIG_TUNE_Z15 (Philipp Rudo) [1876435]
- configs/common/s390: Clean up CONFIG_{MARCH,TUNE}_Z* (Philipp Rudo)
- configs/process_configs.sh: make use of dummy-tools (Philipp Rudo)
- configs/common: disable CONFIG_INIT_STACK_ALL_{PATTERN,ZERO} (Philipp Rudo)
- configs/common/aarch64: disable CONFIG_RELR (Philipp Rudo)
- redhat/config: enable STMICRO nic for RHEL (Mark Salter)
- redhat/configs: Enable ARCH_TEGRA on RHEL (Mark Salter)
- redhat/configs: enable IMA_KEXEC for supported arches (Bruno Meneguele)
- redhat/configs: enable INTEGRITY_SIGNATURE to all arches (Bruno Meneguele)
- configs: enable CONFIG_LEDS_BRIGHTNESS_HW_CHANGED (Benjamin Tissoires)
- RHEL: disable io_uring support (Jeff Moyer)
- all: Changing CONFIG_UV_SYSFS to build uv_sysfs.ko as a loadable module. (Frank Ramsay)
- Enable NITRO_ENCLAVES on RHEL (Vitaly Kuznetsov)
- Update the Quick Start documentation (David Ward)
- redhat/configs: Set PVPANIC_MMIO for x86 and PVPANIC_PCI for aarch64 (Eric Auger) [1961178]
- bpf: Fix unprivileged_bpf_disabled setup (Jiri Olsa)
- Enable CONFIG_BPF_UNPRIV_DEFAULT_OFF (Jiri Olsa)
- configs/common/s390: disable CONFIG_QETH_{OSN,OSX} (Philipp Rudo) [1903201]
- nvme: nvme_mpath_init remove multipath check (Mike Snitzer)
- team: mark team driver as deprecated (Hangbin Liu) [1945477]
- Make CRYPTO_EC also builtin (Simo Sorce) [1947240]
- Do not hard-code a default value for DIST (David Ward)
- Override %%{debugbuildsenabled} if the --with-release option is used (David Ward)
- Improve comments in SPEC file, and move some option tests and macros (David Ward)
- configs: enable CONFIG_EXFAT_FS (Pavel Reichl) [1943423]
- Revert s390x/zfcpdump part of a9d179c40281 and ecbfddd98621 (Vladis Dronov)
- Embed crypto algos, modes and templates needed in the FIPS mode (Vladis Dronov) [1947240]
- configs: Add and enable CONFIG_HYPERV_TESTING for debug kernels (Mohammed Gamal)
- mm/cma: mark CMA on x86_64 tech preview and print RHEL-specific infos (David Hildenbrand) [1945002]
- configs: enable CONFIG_CMA on x86_64 in ARK (David Hildenbrand) [1945002]
- rpmspec: build debug-* meta-packages if debug builds are disabled (Herton R. Krzesinski)
- UIO: disable unused config options (Aristeu Rozanski) [1957819]
- ARK-config: Make amd_pinctrl module builtin (Hans de Goede)
- rpmspec: revert/drop content hash for kernel-headers (Herton R. Krzesinski)
- rpmspec: fix check that calls InitBuildVars (Herton R. Krzesinski)
- fedora: enable zonefs (Damien Le Moal)
- redhat: load specific ARCH keys to INTEGRITY_PLATFORM_KEYRING (Bruno Meneguele)
- redhat: enable INTEGRITY_TRUSTED_KEYRING across all variants (Bruno Meneguele)
- redhat: enable SYSTEM_BLACKLIST_KEYRING across all variants (Bruno Meneguele)
- redhat: enable INTEGRITY_ASYMMETRIC_KEYS across all variants (Bruno Meneguele)
- Remove unused boot loader specification files (David Ward)
- redhat/configs: Enable mlx5 IPsec and TLS offloads (Alaa Hleihel) [1869674 1957636]
- Force DWARF4 because crash does not support DWARF5 yet (Justin M. Forbes)
- common: disable Apple Silicon generally (Peter Robinson)
- cleanup Intel's FPGA configs (Peter Robinson)
- common: move PTP KVM support from ark to common (Peter Robinson)
- Enable CONFIG_DRM_AMDGPU_USERPTR for everyone (Justin M. Forbes)
- redhat: add initial rpminspect configuration (Herton R. Krzesinski)
- fedora: arm updates for 5.13 (Peter Robinson)
- fedora: Enable WWAN and associated MHI bits (Peter Robinson)
- Update CONFIG_MODPROBE_PATH to /usr/sbin (Justin Forbes)
- Fedora set modprobe path (Justin M. Forbes)
- Keep sctp and l2tp modules in modules-extra (Don Zickus)
- Fix ppc64le cross build packaging (Don Zickus)
- Fedora: Make amd_pinctrl module builtin (Hans de Goede)
- Keep CONFIG_KASAN_HW_TAGS off for aarch64 debug configs (Justin M. Forbes)
- New configs in drivers/bus (Fedora Kernel Team)
- RHEL: Don't build KVM PR module on ppc64 (David Gibson) [1930649]
- Flip CONFIG_USB_ROLE_SWITCH from m to y (Justin M. Forbes)
- Set valid options for CONFIG_FW_LOADER_USER_HELPER (Justin M. Forbes)
- Clean up CONFIG_FB_MODE_HELPERS (Justin M. Forbes)
- Turn off CONFIG_VFIO for the s390x zfcpdump kernel (Justin M. Forbes)
- Delete unused CONFIG_SND_SOC_MAX98390 pending-common (Justin M. Forbes)
- Update pending-common configs, preparing to set correctly (Justin M. Forbes)
- Update fedora filters for surface (Justin M. Forbes)
- Build CONFIG_CRYPTO_ECDSA inline for s390x zfcpdump (Justin M. Forbes)
- Replace "flavour" where "variant" is meant instead (David Ward)
- Drop the %%{variant} macro and fix --with-vanilla (David Ward)
- Fix syntax of %%kernel_variant_files (David Ward)
- Change description of --without-vdso-install to fix typo (David Ward)
- Config updates to work around mismatches (Justin M. Forbes)
- CONFIG_SND_SOC_FSL_ASOC_CARD selects CONFIG_MFD_WM8994 now (Justin M. Forbes)
- wireguard: disable in FIPS mode (Hangbin Liu) [1940794]
- Enable mtdram for fedora (rhbz 1955916) (Justin M. Forbes)
- Remove reference to bpf-helpers man page (Justin M. Forbes)
- Fedora: enable more modules for surface devices (Dave Olsthoorn)
- Fix Fedora config mismatch for CONFIG_FSL_ENETC_IERB (Justin M. Forbes)
- hardlink is in /usr/bin/ now (Justin M. Forbes)
- Ensure CONFIG_KVM_BOOK3S_64_PR stays on in Fedora, even if it is turned off in RHEL (Justin M. Forbes)
- Set date in package release from repository commit, not system clock (David Ward)
- Use a better upstream tarball filename for snapshots (David Ward)
- Don't create empty pending-common files on pending-fedora commits (Don Zickus)
- nvme: decouple basic ANA log page re-read support from native multipathing (Mike Snitzer)
- nvme: allow local retry and proper failover for REQ_FAILFAST_TRANSPORT (Mike Snitzer)
- nvme: Return BLK_STS_TARGET if the DNR bit is set (Mike Snitzer)
- Add redhat/configs/pending-common/generic/s390x/zfcpdump/CONFIG_NETFS_SUPPORT (Justin M. Forbes)
- Create ark-latest branch last for CI scripts (Don Zickus)
- Replace /usr/libexec/platform-python with /usr/bin/python3 (David Ward)
- Turn off ADI_AXI_ADC and AD9467 which now require CONFIG_OF (Justin M. Forbes)
- Export ark infrastructure files (Don Zickus)
- docs: Update docs to reflect newer workflow. (Don Zickus)
- Use upstream/master for merge-base with fallback to master (Don Zickus)
- Fedora: Turn off the SND_INTEL_BYT_PREFER_SOF option (Hans de Goede)
- filter-modules.sh.fedora: clean up "netprots" (Paul Bolle)
- filter-modules.sh.fedora: clean up "scsidrvs" (Paul Bolle)
- filter-*.sh.fedora: clean up "ethdrvs" (Paul Bolle)
- filter-*.sh.fedora: clean up "driverdirs" (Paul Bolle)
- filter-*.sh.fedora: remove incorrect entries (Paul Bolle)
- filter-*.sh.fedora: clean up "singlemods" (Paul Bolle)
- filter-modules.sh.fedora: drop unused list "iiodrvs" (Paul Bolle)
- Update mod-internal to fix depmod issue (Nico Pache)
- Turn on CONFIG_VDPA_SIM_NET (rhbz 1942343) (Justin M. Forbes)
- New configs in drivers/power (Fedora Kernel Team)
- Turn on CONFIG_NOUVEAU_DEBUG_PUSH for debug configs (Justin M. Forbes)
- Turn off KFENCE sampling by default for Fedora (Justin M. Forbes)
- Fedora config updates round 2 (Justin M. Forbes)
- New configs in drivers/soc (Jeremy Cline)
- filter-modules.sh: Fix copy/paste error 'input' (Paul Bolle)
- Update module filtering for 5.12 kernels (Justin M. Forbes)
- Fix genlog.py to ensure that comments retain "%%" characters. (Mark Mielke)
- New configs in drivers/leds (Fedora Kernel Team)
- Limit CONFIG_USB_CDNS_SUPPORT to x86_64 and arm in Fedora (David Ward)
- Fedora: Enable CHARGER_GPIO on aarch64 too (Peter Robinson)
- Fedora config updates (Justin M. Forbes)
- wireguard: mark as Tech Preview (Hangbin Liu) [1613522]
- configs: enable CONFIG_WIREGUARD in ARK (Hangbin Liu) [1613522]
- Remove duplicate configs acroos fedora, ark and common (Don Zickus)
- Combine duplicate configs across ark and fedora into common (Don Zickus)
- common/ark: cleanup and unify the parport configs (Peter Robinson)
- iommu/vt-d: enable INTEL_IDXD_SVM for both fedora and rhel (Jerry Snitselaar)
- REDHAT: coresight: etm4x: Disable coresight on HPE Apollo 70 (Jeremy Linton)
- configs/common/generic: disable CONFIG_SLAB_MERGE_DEFAULT (Rafael Aquini)
- Remove _legacy_common_support (Justin M. Forbes)
- redhat/mod-blacklist.sh: Fix floppy blacklisting (Hans de Goede)
- New configs in fs/pstore (CKI@GitLab)
- New configs in arch/powerpc (Fedora Kernel Team)
- configs: enable BPF LSM on Fedora and ARK (Ondrej Mosnacek)
- configs: clean up LSM configs (Ondrej Mosnacek)
- New configs in drivers/platform (CKI@GitLab)
- New configs in drivers/firmware (CKI@GitLab)
- New configs in drivers/mailbox (Fedora Kernel Team)
- New configs in drivers/net/phy (Justin M. Forbes)
- Update CONFIG_DM_MULTIPATH_IOA (Augusto Caringi)
- New configs in mm/Kconfig (CKI@GitLab)
- New configs in arch/powerpc (Jeremy Cline)
- New configs in arch/powerpc (Jeremy Cline)
- New configs in drivers/input (Fedora Kernel Team)
- New configs in net/bluetooth (Justin M. Forbes)
- New configs in drivers/clk (Fedora Kernel Team)
- New configs in init/Kconfig (Jeremy Cline)
- redhat: allow running fedora-configs and rh-configs targets outside of redhat/ (Herton R. Krzesinski)
- all: unify the disable of goldfish (android emulation platform) (Peter Robinson)
- common: minor cleanup/de-dupe of dma/dmabuf debug configs (Peter Robinson)
- common/ark: these drivers/arches were removed in 5.12 (Peter Robinson)
- Correct kernel-devel make prepare build for 5.12. (Paulo E. Castro)
- redhat: add initial support for centos stream dist-git sync on Makefiles (Herton R. Krzesinski)
- redhat/configs: Enable CONFIG_SCHED_STACK_END_CHECK for Fedora and ARK (Josh Poimboeuf) [1856174]
- CONFIG_VFIO now selects IOMMU_API instead of depending on it, causing several config mismatches for the zfcpdump kernel (Justin M. Forbes)
- Turn off weak-modules for Fedora (Justin M. Forbes)
- redhat: enable CONFIG_FW_LOADER_COMPRESS for ARK (Herton R. Krzesinski) [1939095]
- Fedora: filters: update to move dfl-emif to modules (Peter Robinson)
- drop duplicate DEVFREQ_GOV_SIMPLE_ONDEMAND config (Peter Robinson)
- efi: The EFI_VARS is legacy and now x86 only (Peter Robinson)
- common: enable RTC_SYSTOHC to supplement update_persistent_clock64 (Peter Robinson)
- generic: arm: enable SCMI for all options (Peter Robinson)
- fedora: the PCH_CAN driver is x86-32 only (Peter Robinson)
- common: disable legacy CAN device support (Peter Robinson)
- common: Enable Microchip MCP251x/MCP251xFD CAN controllers (Peter Robinson)
- common: Bosch MCAN support for Intel Elkhart Lake (Peter Robinson)
- common: enable CAN_PEAK_PCIEFD PCI-E driver (Peter Robinson)
- common: disable CAN_PEAK_PCIEC PCAN-ExpressCard (Peter Robinson)
- common: enable common CAN layer 2 protocols (Peter Robinson)
- ark: disable CAN_LEDS option (Peter Robinson)
- Fedora: Turn on SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC option (Hans de Goede)
- Fedora: enable modules for surface devices (Dave Olsthoorn)
- Turn on SND_SOC_INTEL_SOUNDWIRE_SOF_MACH for Fedora again (Justin M. Forbes)
- common: fix WM8804 codec dependencies (Peter Robinson)
- Build SERIO_SERPORT as a module (Peter Robinson)
- input: touchscreen: move ELO and Wacom serial touchscreens to x86 (Peter Robinson)
- Sync serio touchscreens for non x86 architectures to the same as ARK (Peter Robinson)
- Only enable SERIO_LIBPS2 on x86 (Peter Robinson)
- Only enable PC keyboard controller and associated keyboard on x86 (Peter Robinson)
- Generic: Mouse: Tweak generic serial mouse options (Peter Robinson)
- Only enable PS2 Mouse options on x86 (Peter Robinson)
- Disable bluetooth highspeed by default (Peter Robinson)
- Fedora: A few more general updates for 5.12 window (Peter Robinson)
- Fedora: Updates for 5.12 merge window (Peter Robinson)
- Fedora: remove dead options that were removed upstream (Peter Robinson)
- redhat: remove CONFIG_DRM_PANEL_XINGBANGDA_XBD599 (Herton R. Krzesinski)
- New configs in arch/powerpc (Fedora Kernel Team)
- Turn on CONFIG_PPC_QUEUED_SPINLOCKS as it is default upstream now (Justin M. Forbes)
- Update pending-common configs to address new upstream config deps (Justin M. Forbes)
- rpmspec: ship gpio-watch.debug in the proper debuginfo package (Herton R. Krzesinski)
- Removed description text as a comment confuses the config generation (Justin M. Forbes)
- New configs in drivers/dma-buf (Jeremy Cline)
- Fedora: ARMv7: build for 16 CPUs. (Peter Robinson)
- Fedora: only enable DEBUG_HIGHMEM on debug kernels (Peter Robinson)
- process_configs.sh: fix find/xargs data flow (Ondrej Mosnacek)
- Fedora config update (Justin M. Forbes)
- fedora: minor arm sound config updates (Peter Robinson)
- Fix trailing white space in redhat/configs/fedora/generic/CONFIG_SND_INTEL_BYT_PREFER_SOF (Justin M. Forbes)
- Add a redhat/rebase-notes.txt file (Hans de Goede)
- Turn on SND_INTEL_BYT_PREFER_SOF for Fedora (Hans de Goede)
- CI: Drop MR ID from the name variable (Veronika Kabatova)
- redhat: add DUP and kpatch certificates to system trusted keys for RHEL build (Herton R. Krzesinski)
- The comments in CONFIG_USB_RTL8153_ECM actually turn off CONFIG_USB_RTL8152 (Justin M. Forbes)
- Update CKI pipeline project (Veronika Kabatova)
- Turn off additional KASAN options for Fedora (Justin M. Forbes)
- Rename the master branch to rawhide for Fedora (Justin M. Forbes)
- Makefile targets for packit integration (Ben Crocker)
- Turn off KASAN for rawhide debug builds (Justin M. Forbes)
- New configs in arch/arm64 (Justin Forbes)
- Remove deprecated Intel MIC config options (Peter Robinson)
- redhat: replace inline awk script with genlog.py call (Herton R. Krzesinski)
- redhat: add genlog.py script (Herton R. Krzesinski)
- kernel.spec.template - fix use_vdso usage (Ben Crocker)
- redhat: remove remaining references of CONFIG_RH_DISABLE_DEPRECATED (Herton R. Krzesinski)
- Turn off vdso_install for ppc (Justin M. Forbes)
- Remove bpf-helpers.7 from bpftool package (Jiri Olsa)
- New configs in lib/Kconfig.debug (Fedora Kernel Team)
- Turn off CONFIG_VIRTIO_CONSOLE for s390x zfcpdump (Justin M. Forbes)
- New configs in drivers/clk (Justin M. Forbes)
- Keep VIRTIO_CONSOLE on s390x available. (Jakub Čajka)
- New configs in lib/Kconfig.debug (Jeremy Cline)
- Fedora 5.11 config updates part 4 (Justin M. Forbes)
- Fedora 5.11 config updates part 3 (Justin M. Forbes)
- Fedora 5.11 config updates part 2 (Justin M. Forbes)
- Update internal (test) module list from RHEL-8 (Joe Lawrence) [1915073]
- Fix USB_XHCI_PCI regression (Justin M. Forbes)
- fedora: fixes for ARMv7 build issue by disabling HIGHPTE (Peter Robinson)
- all: s390x: Increase CONFIG_PCI_NR_FUNCTIONS to 512 (#1888735) (Dan Horák)
- Fedora 5.11 configs pt 1 (Justin M. Forbes)
- redhat: avoid conflict with mod-blacklist.sh and released_kernel defined (Herton R. Krzesinski)
- redhat: handle certificate files conditionally as done for src.rpm (Herton R. Krzesinski)
- specfile: add %%{?_smp_mflags} to "make headers_install" in tools/testing/selftests (Denys Vlasenko)
- specfile: add %%{?_smp_mflags} to "make samples/bpf/" (Denys Vlasenko)
- Run MR testing in CKI pipeline (Veronika Kabatova)
- Reword comment (Nicolas Chauvet)
- Add with_cross_arm conditional (Nicolas Chauvet)
- Redefines __strip if with_cross (Nicolas Chauvet)
- fedora: only enable ACPI_CONFIGFS, ACPI_CUSTOM_METHOD in debug kernels (Peter Robinson)
- fedora: User the same EFI_CUSTOM_SSDT_OVERLAYS as ARK (Peter Robinson)
- all: all arches/kernels enable the same DMI options (Peter Robinson)
- all: move SENSORS_ACPI_POWER to common/generic (Peter Robinson)
- fedora: PCIE_HISI_ERR is already in common (Peter Robinson)
- all: all ACPI platforms enable ATA_ACPI so move it to common (Peter Robinson)
- all: x86: move shared x86 acpi config options to generic (Peter Robinson)
- All: x86: Move ACPI_VIDEO to common/x86 (Peter Robinson)
- All: x86: Enable ACPI_DPTF (Intel DPTF) (Peter Robinson)
- All: enable ACPI_BGRT for all ACPI platforms. (Peter Robinson)
- All: Only build ACPI_EC_DEBUGFS for debug kernels (Peter Robinson)
- All: Disable Intel Classmate PC ACPI_CMPC option (Peter Robinson)
- cleanup: ACPI_PROCFS_POWER was removed upstream (Peter Robinson)
- All: ACPI: De-dupe the ACPI options that are the same across ark/fedora on x86/arm (Peter Robinson)
- Enable the vkms module in Fedora (Jeremy Cline)
- Fedora: arm updates for 5.11 and general cross Fedora cleanups (Peter Robinson)
- Add gcc-c++ to BuildRequires (Justin M. Forbes)
- Update CONFIG_KASAN_HW_TAGS (Justin M. Forbes)
- fedora: arm: move generic power off/reset to all arm (Peter Robinson)
- fedora: ARMv7: build in DEVFREQ_GOV_SIMPLE_ONDEMAND until I work out why it's changed (Peter Robinson)
- fedora: cleanup joystick_adc (Peter Robinson)
- fedora: update some display options (Peter Robinson)
- fedora: arm: enable TI PRU options (Peter Robinson)
- fedora: arm: minor exynos plaform updates (Peter Robinson)
- arm: SoC: disable Toshiba Visconti SoC (Peter Robinson)
- common: disable ARCH_BCM4908 (NFC) (Peter Robinson)
- fedora: minor arm config updates (Peter Robinson)
- fedora: enable Tegra 234 SoC (Peter Robinson)
- fedora: arm: enable new Hikey 3xx options (Peter Robinson)
- Fedora: USB updates (Peter Robinson)
- fedora: enable the GNSS receiver subsystem (Peter Robinson)
- Remove POWER_AVS as no longer upstream (Peter Robinson)
- Cleanup RESET_RASPBERRYPI (Peter Robinson)
- Cleanup GPIO_CDEV_V1 options. (Peter Robinson)
- fedora: arm crypto updates (Peter Robinson)
- CONFIG_KASAN_HW_TAGS for aarch64 (Justin M. Forbes)
- Fedora: cleanup PCMCIA configs, move to x86 (Peter Robinson)
- New configs in drivers/rtc (Fedora Kernel Team)
- redhat/configs: Enable CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL (Josh Poimboeuf) [1856176]
- redhat/configs: Enable CONFIG_GCC_PLUGIN_STRUCTLEAK (Josh Poimboeuf) [1856176]
- redhat/configs: Enable CONFIG_GCC_PLUGINS on ARK (Josh Poimboeuf) [1856176]
- redhat/configs: Enable CONFIG_KASAN on Fedora (Josh Poimboeuf) [1856176]
- New configs in init/Kconfig (Fedora Kernel Team)
- build_configs.sh: Fix syntax flagged by shellcheck (Ben Crocker)
- genspec.sh: Fix syntax flagged by shellcheck (Ben Crocker)
- mod-blacklist.sh: Fix syntax flagged by shellcheck (Ben Crocker)
- Enable Speakup accessibility driver (Justin M. Forbes)
- New configs in init/Kconfig (Fedora Kernel Team)
- Fix fedora config mismatch due to dep changes (Justin M. Forbes)
- New configs in drivers/crypto (Jeremy Cline)
- Remove duplicate ENERGY_MODEL configs (Peter Robinson)
- This is selected by PCIE_QCOM so must match (Justin M. Forbes)
- drop unused BACKLIGHT_GENERIC (Peter Robinson)
- Remove cp instruction already handled in instruction below. (Paulo E. Castro)
- Add all the dependencies gleaned from running `make prepare` on a bloated devel kernel. (Paulo E. Castro)
- Add tools to path mangling script. (Paulo E. Castro)
- Remove duplicate cp statement which is also not specific to x86. (Paulo E. Castro)
- Correct orc_types failure whilst running `make prepare` https://bugzilla.redhat.com/show_bug.cgi?id=1882854 (Paulo E. Castro)
- redhat: ark: enable CONFIG_IKHEADERS (Jiri Olsa)
- Add missing '$' sign to (GIT) in redhat/Makefile (Augusto Caringi)
- Remove filterdiff and use native git instead (Don Zickus)
- New configs in net/sched (Justin M. Forbes)
- New configs in drivers/mfd (CKI@GitLab)
- New configs in drivers/mfd (Fedora Kernel Team)
- New configs in drivers/firmware (Fedora Kernel Team)
- Temporarily backout parallel xz script (Justin M. Forbes)
- redhat: explicitly disable CONFIG_IMA_APPRAISE_SIGNED_INIT (Bruno Meneguele)
- redhat: enable CONFIG_EVM_LOAD_X509 on ARK (Bruno Meneguele)
- redhat: enable CONFIG_EVM_ATTR_FSUUID on ARK (Bruno Meneguele)
- redhat: enable CONFIG_EVM in all arches and flavors (Bruno Meneguele)
- redhat: enable CONFIG_IMA_LOAD_X509 on ARK (Bruno Meneguele)
- redhat: set CONFIG_IMA_DEFAULT_HASH to SHA256 (Bruno Meneguele)
- redhat: enable CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT (Bruno Meneguele)
- redhat: enable CONFIG_IMA_READ_POLICY on ARK (Bruno Meneguele)
- redhat: set default IMA template for all ARK arches (Bruno Meneguele)
- redhat: enable CONFIG_IMA_DEFAULT_HASH_SHA256 for all flavors (Bruno Meneguele)
- redhat: disable CONFIG_IMA_DEFAULT_HASH_SHA1 (Bruno Meneguele)
- redhat: enable CONFIG_IMA_ARCH_POLICY for ppc and x86 (Bruno Meneguele)
- redhat: enable CONFIG_IMA_APPRAISE_MODSIG (Bruno Meneguele)
- redhat: enable CONFIG_IMA_APPRAISE_BOOTPARAM (Bruno Meneguele)
- redhat: enable CONFIG_IMA_APPRAISE (Bruno Meneguele)
- redhat: enable CONFIG_INTEGRITY for aarch64 (Bruno Meneguele)
- kernel: Update some missing KASAN/KCSAN options (Jeremy Linton)
- kernel: Enable coresight on aarch64 (Jeremy Linton)
- Update CONFIG_INET6_ESPINTCP (Justin Forbes)
- New configs in net/ipv6 (Justin M. Forbes)
- fedora: move CONFIG_RTC_NVMEM options from ark to common (Peter Robinson)
- configs: Enable CONFIG_DEBUG_INFO_BTF (Don Zickus)
- fedora: some minor arm audio config tweaks (Peter Robinson)
- Ship xpad with default modules on Fedora and RHEL (Bastien Nocera)
- Fedora: Only enable legacy serial/game port joysticks on x86 (Peter Robinson)
- Fedora: Enable the options required for the Librem 5 Phone (Peter Robinson)
- Fedora config update (Justin M. Forbes)
- Fedora config change because CONFIG_FSL_DPAA2_ETH now selects CONFIG_FSL_XGMAC_MDIO (Justin M. Forbes)
- redhat: generic enable CONFIG_INET_MPTCP_DIAG (Davide Caratti)
- Fedora config update (Justin M. Forbes)
- Enable NANDSIM for Fedora (Justin M. Forbes)
- Re-enable CONFIG_ACPI_TABLE_UPGRADE for Fedora since upstream disables this if secureboot is active (Justin M. Forbes)
- Ath11k related config updates (Justin M. Forbes)
- Fedora config updates for ath11k (Justin M. Forbes)
- Turn on ATH11K for Fedora (Justin M. Forbes)
- redhat: enable CONFIG_INTEL_IOMMU_SVM (Jerry Snitselaar)
- More Fedora config fixes (Justin M. Forbes)
- Fedora 5.10 config updates (Justin M. Forbes)
- Fedora 5.10 configs round 1 (Justin M. Forbes)
- Fedora config updates (Justin M. Forbes)
- Allow kernel-tools to build without selftests (Don Zickus)
- Allow building of kernel-tools standalone (Don Zickus)
- redhat: ark: disable CONFIG_NET_ACT_CTINFO (Davide Caratti)
- redhat: ark: disable CONFIG_NET_SCH_TEQL (Davide Caratti)
- redhat: ark: disable CONFIG_NET_SCH_SFB (Davide Caratti)
- redhat: ark: disable CONFIG_NET_SCH_QFQ (Davide Caratti)
- redhat: ark: disable CONFIG_NET_SCH_PLUG (Davide Caratti)
- redhat: ark: disable CONFIG_NET_SCH_PIE (Davide Caratti)
- redhat: ark: disable CONFIG_NET_SCH_HHF (Davide Caratti)
- redhat: ark: disable CONFIG_NET_SCH_DSMARK (Davide Caratti)
- redhat: ark: disable CONFIG_NET_SCH_DRR (Davide Caratti)
- redhat: ark: disable CONFIG_NET_SCH_CODEL (Davide Caratti)
- redhat: ark: disable CONFIG_NET_SCH_CHOKE (Davide Caratti)
- redhat: ark: disable CONFIG_NET_SCH_CBQ (Davide Caratti)
- redhat: ark: disable CONFIG_NET_SCH_ATM (Davide Caratti)
- redhat: ark: disable CONFIG_NET_EMATCH and sub-targets (Davide Caratti)
- redhat: ark: disable CONFIG_NET_CLS_TCINDEX (Davide Caratti)
- redhat: ark: disable CONFIG_NET_CLS_RSVP6 (Davide Caratti)
- redhat: ark: disable CONFIG_NET_CLS_RSVP (Davide Caratti)
- redhat: ark: disable CONFIG_NET_CLS_ROUTE4 (Davide Caratti)
- redhat: ark: disable CONFIG_NET_CLS_BASIC (Davide Caratti)
- redhat: ark: disable CONFIG_NET_ACT_SKBMOD (Davide Caratti)
- redhat: ark: disable CONFIG_NET_ACT_SIMP (Davide Caratti)
- redhat: ark: disable CONFIG_NET_ACT_NAT (Davide Caratti)
- arm64/defconfig: Enable CONFIG_KEXEC_FILE (Bhupesh Sharma) [1821565]
- redhat/configs: Cleanup CONFIG_CRYPTO_SHA512 (Prarit Bhargava)
- New configs in drivers/mfd (Fedora Kernel Team)
- Fix LTO issues with kernel-tools (Don Zickus)
- Point pathfix to the new location for gen_compile_commands.py (Justin M. Forbes)
- configs: Disable CONFIG_SECURITY_SELINUX_DISABLE (Ondrej Mosnacek)
- [Automatic] Handle config dependency changes (Don Zickus)
- configs/iommu: Add config comment to empty CONFIG_SUN50I_IOMMU file (Jerry Snitselaar)
- New configs in kernel/trace (Fedora Kernel Team)
- Fix Fedora config locations (Justin M. Forbes)
- Fedora config updates (Justin M. Forbes)
- configs: enable CONFIG_CRYPTO_CTS=y so cts(cbc(aes)) is available in FIPS mode (Vladis Dronov) [1855161]
- Partial revert: Add master merge check (Don Zickus)
- Update Maintainers doc to reflect workflow changes (Don Zickus)
- WIP: redhat/docs: Update documentation for single branch workflow (Prarit Bhargava)
- Add CONFIG_ARM64_MTE which is not picked up by the config scripts for some reason (Justin M. Forbes)
- Disable Speakup synth DECEXT (Justin M. Forbes)
- Enable Speakup for Fedora since it is out of staging (Justin M. Forbes)
- Modify patchlist changelog output (Don Zickus)
- process_configs.sh: Fix syntax flagged by shellcheck (Ben Crocker)
- generate_all_configs.sh: Fix syntax flagged by shellcheck (Ben Crocker)
- redhat/self-test: Initial commit (Ben Crocker)
- Fixes "acpi: prefer booting with ACPI over DTS" to be RHEL only (Peter Robinson)
- arch/x86: Remove vendor specific CPU ID checks (Prarit Bhargava)
- redhat: Replace hardware.redhat.com link in Unsupported message (Prarit Bhargava) [1810301]
- x86: Fix compile issues with rh_check_supported() (Don Zickus)
- KEYS: Make use of platform keyring for module signature verify (Robert Holmes)
- Input: rmi4 - remove the need for artificial IRQ in case of HID (Benjamin Tissoires)
- ARM: tegra: usb no reset (Peter Robinson)
- arm: make CONFIG_HIGHPTE optional without CONFIG_EXPERT (Jon Masters)
- redhat: rh_kabi: deduplication friendly structs (Jiri Benc)
- redhat: rh_kabi add a comment with warning about RH_KABI_EXCLUDE usage (Jiri Benc)
- redhat: rh_kabi: introduce RH_KABI_EXTEND_WITH_SIZE (Jiri Benc)
- redhat: rh_kabi: Indirect EXTEND macros so nesting of other macros will resolve. (Don Dutile)
- redhat: rh_kabi: Fix RH_KABI_SET_SIZE to use dereference operator (Tony Camuso)
- redhat: rh_kabi: Add macros to size and extend structs (Prarit Bhargava)
- Removing Obsolete hba pci-ids from rhel8 (Dick Kennedy)
- mptsas: pci-id table changes (Laura Abbott)
- mptsas: Taint kernel if mptsas is loaded (Laura Abbott)
- mptspi: pci-id table changes (Laura Abbott)
- qla2xxx: Remove PCI IDs of deprecated adapter (Jeremy Cline)
- be2iscsi: remove unsupported device IDs (Chris Leech)
- mptspi: Taint kernel if mptspi is loaded (Laura Abbott)
- hpsa: remove old cciss-based smartarray pci ids (Joseph Szczypek)
- qla4xxx: Remove deprecated PCI IDs from RHEL 8 (Chad Dupuis)
- aacraid: Remove depreciated device and vendor PCI id's (Raghava Aditya Renukunta)
- megaraid_sas: remove deprecated pci-ids (Tomas Henzl)
- mpt*: remove certain deprecated pci-ids (Jeremy Cline)
- kernel: add SUPPORT_REMOVED kernel taint (Tomas Henzl)
- Rename RH_DISABLE_DEPRECATED to RHEL_DIFFERENCES (Don Zickus)
- Add option of 13 for FORCE_MAX_ZONEORDER (Peter Robinson)
- s390: Lock down the kernel when the IPL secure flag is set (Jeremy Cline)
- efi: Lock down the kernel if booted in secure boot mode (David Howells)
- efi: Add an EFI_SECURE_BOOT flag to indicate secure boot mode (David Howells)
- security: lockdown: expose a hook to lock the kernel down (Jeremy Cline)
- Make get_cert_list() use efi_status_to_str() to print error messages. (Peter Jones)
- Add efi_status_to_str() and rework efi_status_to_err(). (Peter Jones)
- Add support for deprecating processors (Laura Abbott) [1565717 1595918 1609604 1610493]
- arm: aarch64: Drop the EXPERT setting from ARM64_FORCE_52BIT (Jeremy Cline)
- iommu/arm-smmu: workaround DMA mode issues (Laura Abbott)
- rh_kabi: introduce RH_KABI_EXCLUDE (Jakub Racek)
- ipmi: do not configure ipmi for HPE m400 (Laura Abbott) [1670017]
- kABI: Add generic kABI macros to use for kABI workarounds (Myron Stowe) [1546831]
- add pci_hw_vendor_status() (Maurizio Lombardi)
- ahci: thunderx2: Fix for errata that affects stop engine (Robert Richter)
- Vulcan: AHCI PCI bar fix for Broadcom Vulcan early silicon (Robert Richter)
- bpf: set unprivileged_bpf_disabled to 1 by default, add a boot parameter (Eugene Syromiatnikov) [1561171]
- add Red Hat-specific taint flags (Eugene Syromiatnikov) [1559877]
- tags.sh: Ignore redhat/rpm (Jeremy Cline)
- put RHEL info into generated headers (Laura Abbott) [1663728]
- acpi: prefer booting with ACPI over DTS (Mark Salter) [1576869]
- aarch64: acpi scan: Fix regression related to X-Gene UARTs (Mark Salter) [1519554]
- ACPI / irq: Workaround firmware issue on X-Gene based m400 (Mark Salter) [1519554]
- modules: add rhelversion MODULE_INFO tag (Laura Abbott)
- ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support (Al Stone) [1518076]
- Add Red Hat tainting (Laura Abbott) [1565704]
- Introduce CONFIG_RH_DISABLE_DEPRECATED (Laura Abbott)
- Stop merging ark-patches for release (Don Zickus)
- Fix path location for ark-update-configs.sh (Don Zickus)
- Combine Red Hat patches into single patch (Don Zickus)
- New configs in drivers/misc (Jeremy Cline)
- New configs in drivers/net/wireless (Justin M. Forbes)
- New configs in drivers/phy (Fedora Kernel Team)
- New configs in drivers/tty (Fedora Kernel Team)
- Set SquashFS decompression options for all flavors to match RHEL (Bohdan Khomutskyi)
- configs: Enable CONFIG_ENERGY_MODEL (Phil Auld)
- New configs in drivers/pinctrl (Fedora Kernel Team)
- Update CONFIG_THERMAL_NETLINK (Justin Forbes)
- Separate merge-upstream and release stages (Don Zickus)
- Re-enable CONFIG_IR_SERIAL on Fedora (Prarit Bhargava)
- Create Patchlist.changelog file (Don Zickus)
- Filter out upstream commits from changelog (Don Zickus)
- Merge Upstream script fixes (Don Zickus)
- kernel.spec: Remove kernel-keys directory on rpm erase (Prarit Bhargava)
- Add mlx5_vdpa to module filter for Fedora (Justin M. Forbes)
- Add python3-sphinx_rtd_theme buildreq for docs (Justin M. Forbes)
- redhat/configs/process_configs.sh: Remove *.config.orig files (Prarit Bhargava)
- redhat/configs/process_configs.sh: Add process_configs_known_broken flag (Prarit Bhargava)
- redhat/Makefile: Fix '*-configs' targets (Prarit Bhargava)
- dist-merge-upstream: Checkout known branch for ci scripts (Don Zickus)
- kernel.spec: don't override upstream compiler flags for ppc64le (Dan Horák)
- Fedora config updates (Justin M. Forbes)
- Fedora confi gupdate (Justin M. Forbes)
- mod-sign.sh: Fix syntax flagged by shellcheck (Ben Crocker)
- Swap how ark-latest is built (Don Zickus)
- Add extra version bump to os-build branch (Don Zickus)
- dist-release: Avoid needless version bump. (Don Zickus)
- Add dist-fedora-release target (Don Zickus)
- Remove redundant code in dist-release (Don Zickus)
- Makefile.common rename TAG to _TAG (Don Zickus)
- Fedora config change (Justin M. Forbes)
- Fedora filter update (Justin M. Forbes)
- Config update for Fedora (Justin M. Forbes)
- enable PROTECTED_VIRTUALIZATION_GUEST for all s390x kernels (Dan Horák)
- redhat: ark: enable CONFIG_NET_SCH_TAPRIO (Davide Caratti)
- redhat: ark: enable CONFIG_NET_SCH_ETF (Davide Caratti)
- More Fedora config updates (Justin M. Forbes)
- New config deps (Justin M. Forbes)
- Fedora config updates (Justin M. Forbes)
- First half of config updates for Fedora (Justin M. Forbes)
- Updates for Fedora arm architectures for the 5.9 window (Peter Robinson)
- Merge 5.9 config changes from Peter Robinson (Justin M. Forbes)
- Add config options that only show up when we prep on arm (Justin M. Forbes)
- Config updates for Fedora (Justin M. Forbes)
- fedora: enable enery model (Peter Robinson)
- Use the configs/generic config for SND_HDA_INTEL everywhere (Peter Robinson)
- Enable ZSTD compression algorithm on all kernels (Peter Robinson)
- Enable ARM_SMCCC_SOC_ID on all aarch64 kernels (Peter Robinson)
- iio: enable LTR-559 light and proximity sensor (Peter Robinson)
- iio: chemical: enable some popular chemical and partical sensors (Peter Robinson)
- More mismatches (Justin M. Forbes)
- Fedora config change due to deps (Justin M. Forbes)
- CONFIG_SND_SOC_MAX98390 is now selected by SND_SOC_INTEL_DA7219_MAX98357A_GENERIC (Justin M. Forbes)
- Config change required for build part 2 (Justin M. Forbes)
- Config change required for build (Justin M. Forbes)
- Fedora config update (Justin M. Forbes)
- Add ability to sync upstream through Makefile (Don Zickus)
- Add master merge check (Don Zickus)
- Replace hardcoded values 'os-build' and project id with variables (Don Zickus)
- redhat/Makefile.common: Fix MARKER (Prarit Bhargava)
- gitattributes: Remove unnecesary export restrictions (Prarit Bhargava)
- Add new certs for dual signing with boothole (Justin M. Forbes)
- Update secureboot signing for dual keys (Justin M. Forbes)
- fedora: enable LEDS_SGM3140 for arm configs (Peter Robinson)
- Enable CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG (Justin M. Forbes)
- redhat/configs: Fix common CONFIGs (Prarit Bhargava)
- redhat/configs: General CONFIG cleanups (Prarit Bhargava)
- redhat/configs: Update & generalize evaluate_configs (Prarit Bhargava)
- fedora: arm: Update some meson config options (Peter Robinson)
- redhat/docs: Add Fedora RPM tagging date (Prarit Bhargava)
- Update config for renamed panel driver. (Peter Robinson)
- Enable SERIAL_SC16IS7XX for SPI interfaces (Peter Robinson)
- s390x-zfcpdump: Handle missing Module.symvers file (Don Zickus)
- Fedora config updates (Justin M. Forbes)
- redhat/configs: Add .tmp files to .gitignore (Prarit Bhargava)
- disable uncommon TCP congestion control algorithms (Davide Caratti)
- Add new bpf man pages (Justin M. Forbes)
- Add default option for CONFIG_ARM64_BTI_KERNEL to pending-common so that eln kernels build (Justin M. Forbes)
- redhat/Makefile: Add fedora-configs and rh-configs make targets (Prarit Bhargava)
- redhat/configs: Use SHA512 for module signing (Prarit Bhargava)
- genspec.sh: 'touch' empty Patchlist file for single tarball (Don Zickus)
- Fedora config update for rc1 (Justin M. Forbes)
- Fedora config updates (Justin M. Forbes)
- Fedora config updates (Justin M. Forbes)
- redhat/Makefile.common: fix RPMKSUBLEVEL condition (Ondrej Mosnacek)
- redhat/Makefile: silence KABI tar output (Ondrej Mosnacek)
- One more Fedora config update (Justin M. Forbes)
- Fedora config updates (Justin M. Forbes)
- Fix PATCHLEVEL for merge window (Justin M. Forbes)
- Change ark CONFIG_COMMON_CLK to yes, it is selected already by other options (Justin M. Forbes)
- Fedora config updates (Justin M. Forbes)
- Fedora config updates (Justin M. Forbes)
- Fedora config updates (Justin M. Forbes)
- More module filtering for Fedora (Justin M. Forbes)
- Update filters for rnbd in Fedora (Justin M. Forbes)
- Fedora config updates (Justin M. Forbes)
- Fix up module filtering for 5.8 (Justin M. Forbes)
- Fedora config updates (Justin M. Forbes)
- More Fedora config work (Justin M. Forbes)
- RTW88BE and CE have been extracted to their own modules (Justin M. Forbes)
- Set CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK for Fedora (Justin M. Forbes)
- Fedora config updates (Justin M. Forbes)
- Arm64 Use Branch Target Identification for kernel (Justin M. Forbes)
- Change value of CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE (Justin M. Forbes)
- Fedora config updates (Justin M. Forbes)
- Fix configs for Fedora (Justin M. Forbes)
- Add zero-commit to format-patch options (Justin M. Forbes)
- Copy Makefile.rhelver as a source file rather than a patch (Jeremy Cline)
- Move the sed to clear the patch templating outside of conditionals (Justin M. Forbes)
- Match template format in kernel.spec.template (Justin M. Forbes)
- Break out the Patches into individual files for dist-git (Justin M. Forbes)
- Break the Red Hat patch into individual commits (Jeremy Cline)
- Fix update_scripts.sh unselective pattern sub (David Howells)
- Add cec to the filter overrides (Justin M. Forbes)
- Add overrides to filter-modules.sh (Justin M. Forbes)
- redhat/configs: Enable CONFIG_SMC91X and disable CONFIG_SMC911X (Prarit Bhargava) [1722136]
- Include bpftool-struct_ops man page in the bpftool package (Jeremy Cline)
- Add sharedbuffer_configuration.py to the pathfix.py script (Jeremy Cline)
- Use __make macro instead of make (Tom Stellard)
- Sign off generated configuration patches (Jeremy Cline)
- Drop the static path configuration for the Sphinx docs (Jeremy Cline)
- redhat: Add dummy-module kernel module (Prarit Bhargava)
- redhat: enable CONFIG_LWTUNNEL_BPF (Jiri Benc)
- Remove typoed config file aarch64CONFIG_SM_GCC_8150 (Justin M. Forbes)
- Add Documentation back to kernel-devel as it has Kconfig now (Justin M. Forbes)
- Copy distro files rather than moving them (Jeremy Cline)
- kernel.spec: fix 'make scripts' for kernel-devel package (Brian Masney)
- Makefile: correct help text for dist-cross-<arch>-rpms (Brian Masney)
- redhat/Makefile: Fix RHEL8 python warning (Prarit Bhargava)
- redhat: Change Makefile target names to dist- (Prarit Bhargava)
- configs: Disable Serial IR driver (Prarit Bhargava)
- Fix "multiple %%files for package kernel-tools" (Pablo Greco)
- Introduce a Sphinx documentation project (Jeremy Cline)
- Build ARK against ELN (Don Zickus)
- Drop the requirement to have a remote called linus (Jeremy Cline)
- Rename 'internal' branch to 'os-build' (Don Zickus)
- Only include open merge requests with "Include in Releases" label (Jeremy Cline)
- Package gpio-watch in kernel-tools (Jeremy Cline)
- Exit non-zero if the tag already exists for a release (Jeremy Cline)
- Adjust the changelog update script to not push anything (Jeremy Cline)
- Drop --target noarch from the rh-rpms make target (Jeremy Cline)
- Add a script to generate release tags and branches (Jeremy Cline)
- Set CONFIG_VDPA for fedora (Justin M. Forbes)
- Add a README to the dist-git repository (Jeremy Cline)
- Provide defaults in ark-rebase-patches.sh (Jeremy Cline)
- Default ark-rebase-patches.sh to not report issues (Jeremy Cline)
- Drop DIST from release commits and tags (Jeremy Cline)
- Place the buildid before the dist in the release (Jeremy Cline)
- Sync up with Fedora arm configuration prior to merging (Jeremy Cline)
- Disable CONFIG_PROTECTED_VIRTUALIZATION_GUEST for zfcpdump (Jeremy Cline)
- Add RHMAINTAINERS file and supporting conf (Don Zickus)
- Add a script to test if all commits are signed off (Jeremy Cline)
- Fix make rh-configs-arch (Don Zickus)
- Drop RH_FEDORA in favor of the now-merged RHEL_DIFFERENCES (Jeremy Cline)
- Sync up Fedora configs from the first week of the merge window (Jeremy Cline)
- Migrate blacklisting floppy.ko to mod-blacklist.sh (Don Zickus)
- kernel packaging: Combine mod-blacklist.sh and mod-extra-blacklist.sh (Don Zickus)
- kernel packaging: Fix extra namespace collision (Don Zickus)
- mod-extra.sh: Rename to mod-blacklist.sh (Don Zickus)
- mod-extra.sh: Make file generic (Don Zickus)
- Fix a painfully obvious YAML syntax error in .gitlab-ci.yml (Jeremy Cline)
- Add in armv7hl kernel header support (Don Zickus)
- Disable all BuildKernel commands when only building headers (Don Zickus)
- Drop any gitlab-ci patches from ark-patches (Jeremy Cline)
- Build the srpm for internal branch CI using the vanilla tree (Jeremy Cline)
- Pull in the latest ARM configurations for Fedora (Jeremy Cline)
- Fix xz memory usage issue (Neil Horman)
- Use ark-latest instead of master for update script (Jeremy Cline)
- Move the CI jobs back into the ARK repository (Jeremy Cline)
- Sync up ARK's Fedora config with the dist-git repository (Jeremy Cline)
- Pull in the latest configuration changes from Fedora (Jeremy Cline)
- configs: enable CONFIG_NET_SCH_CBS (Marcelo Ricardo Leitner)
- Drop configuration options in fedora/ that no longer exist (Jeremy Cline)
- Set RH_FEDORA for ARK and Fedora (Jeremy Cline)
- redhat/kernel.spec: Include the release in the kernel COPYING file (Jeremy Cline)
- redhat/kernel.spec: add scripts/jobserver-exec to py3_shbang_opts list (Jeremy Cline)
- redhat/kernel.spec: package bpftool-gen man page (Jeremy Cline)
- distgit-changelog: handle multiple y-stream BZ numbers (Bruno Meneguele)
- redhat/kernel.spec: remove all inline comments (Bruno Meneguele)
- redhat/genspec: awk unknown whitespace regex pattern (Bruno Meneguele)
- Improve the readability of gen_config_patches.sh (Jeremy Cline)
- Fix some awkward edge cases in gen_config_patches.sh (Jeremy Cline)
- Update the CI environment to use Fedora 31 (Jeremy Cline)
- redhat: drop whitespace from with_gcov macro (Jan Stancek)
- configs: Enable CONFIG_KEY_DH_OPERATIONS on ARK (Ondrej Mosnacek)
- configs: Adjust CONFIG_MPLS_ROUTING and CONFIG_MPLS_IPTUNNEL (Laura Abbott)
- New configs in lib/crypto (Jeremy Cline)
- New configs in drivers/char (Jeremy Cline)
- Turn on BLAKE2B for Fedora (Jeremy Cline)
- kernel.spec.template: Clean up stray *.h.s files (Laura Abbott)
- Build the SRPM in the CI job (Jeremy Cline)
- New configs in net/tls (Jeremy Cline)
- New configs in net/tipc (Jeremy Cline)
- New configs in lib/kunit (Jeremy Cline)
- Fix up released_kernel case (Laura Abbott)
- New configs in lib/Kconfig.debug (Jeremy Cline)
- New configs in drivers/ptp (Jeremy Cline)
- New configs in drivers/nvme (Jeremy Cline)
- New configs in drivers/net/phy (Jeremy Cline)
- New configs in arch/arm64 (Jeremy Cline)
- New configs in drivers/crypto (Jeremy Cline)
- New configs in crypto/Kconfig (Jeremy Cline)
- Add label so the Gitlab to email bridge ignores the changelog (Jeremy Cline)
- Temporarily switch TUNE_DEFAULT to y (Jeremy Cline)
- Run config test for merge requests and internal (Jeremy Cline)
- Add missing licensedir line (Laura Abbott)
- redhat/scripts: Remove redhat/scripts/rh_get_maintainer.pl (Prarit Bhargava)
- configs: Take CONFIG_DEFAULT_MMAP_MIN_ADDR from Fedra (Laura Abbott)
- configs: Turn off ISDN (Laura Abbott)
- Add a script to generate configuration patches (Laura Abbott)
- Introduce rh-configs-commit (Laura Abbott)
- kernel-packaging: Remove kernel files from kernel-modules-extra package (Prarit Bhargava)
- configs: Enable CONFIG_DEBUG_WX (Laura Abbott)
- configs: Disable wireless USB (Laura Abbott)
- Clean up some temporary config files (Laura Abbott)
- configs: New config in drivers/gpu for v5.4-rc1 (Jeremy Cline)
- configs: New config in arch/powerpc for v5.4-rc1 (Jeremy Cline)
- configs: New config in crypto for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/usb for v5.4-rc1 (Jeremy Cline)
- AUTOMATIC: New configs (Jeremy Cline)
- Skip ksamples for bpf, they are broken (Jeremy Cline)
- configs: New config in fs/erofs for v5.4-rc1 (Jeremy Cline)
- configs: New config in mm for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/md for v5.4-rc1 (Jeremy Cline)
- configs: New config in init for v5.4-rc1 (Jeremy Cline)
- configs: New config in fs/fuse for v5.4-rc1 (Jeremy Cline)
- merge.pl: Avoid comments but do not skip them (Don Zickus)
- configs: New config in drivers/net/ethernet/pensando for v5.4-rc1 (Jeremy Cline)
- Update a comment about what released kernel means (Laura Abbott)
- Provide both Fedora and RHEL files in the SRPM (Laura Abbott)
- kernel.spec.template: Trim EXTRAVERSION in the Makefile (Laura Abbott)
- kernel.spec.template: Add macros for building with nopatches (Laura Abbott)
- kernel.spec.template: Add some macros for Fedora differences (Laura Abbott)
- kernel.spec.template: Consolodate the options (Laura Abbott)
- configs: Add pending direcory to Fedora (Laura Abbott)
- kernel.spec.template: Don't run hardlink if rpm-ostree is in use (Laura Abbott)
- configs: New config in net/can for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/net/phy for v5.4-rc1 (Jeremy Cline)
- configs: Increase x86_64 NR_UARTS to 64 (Prarit Bhargava) [1730649]
- configs: turn on ARM64_FORCE_52BIT for debug builds (Jeremy Cline)
- kernel.spec.template: Tweak the python3 mangling (Laura Abbott)
- kernel.spec.template: Add --with verbose option (Laura Abbott)
- kernel.spec.template: Switch to using %%install instead of %%__install (Laura Abbott)
- kernel.spec.template: Make the kernel.org URL https (Laura Abbott)
- kernel.spec.template: Update message about secure boot signing (Laura Abbott)
- kernel.spec.template: Move some with flags definitions up (Laura Abbott)
- kernel.spec.template: Update some BuildRequires (Laura Abbott)
- kernel.spec.template: Get rid of %%clean (Laura Abbott)
- configs: New config in drivers/char for v5.4-rc1 (Jeremy Cline)
- configs: New config in net/sched for v5.4-rc1 (Jeremy Cline)
- configs: New config in lib for v5.4-rc1 (Jeremy Cline)
- configs: New config in fs/verity for v5.4-rc1 (Jeremy Cline)
- configs: New config in arch/aarch64 for v5.4-rc4 (Jeremy Cline)
- configs: New config in arch/arm64 for v5.4-rc1 (Jeremy Cline)
- Flip off CONFIG_ARM64_VA_BITS_52 so the bundle that turns it on applies (Jeremy Cline)
- New configuration options for v5.4-rc4 (Jeremy Cline)
- Correctly name tarball for single tarball builds (Laura Abbott)
- configs: New config in drivers/pci for v5.4-rc1 (Jeremy Cline)
- Allow overriding the dist tag on the command line (Laura Abbott)
- Allow scratch branch target to be overridden (Laura Abbott)
- Remove long dead BUILD_DEFAULT_TARGET (Laura Abbott)
- Amend the changelog when rebasing (Laura Abbott)
- configs: New config in drivers/platform for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/pinctrl for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/net/wireless for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/net/ethernet/mellanox for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/net/can for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/hid for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/dma-buf for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/crypto for v5.4-rc1 (Jeremy Cline)
- configs: New config in arch/s390 for v5.4-rc1 (Jeremy Cline)
- configs: New config in block for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/cpuidle for v5.4-rc1 (Jeremy Cline)
- redhat: configs: Split CONFIG_CRYPTO_SHA512 (Laura Abbott)
- redhat: Set Fedora options (Laura Abbott)
- Set CRYPTO_SHA3_*_S390 to builtin on zfcpdump (Jeremy Cline)
- configs: New config in drivers/edac for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/firmware for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/hwmon for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/iio for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/mmc for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/tty for v5.4-rc1 (Jeremy Cline)
- configs: New config in arch/s390 for v5.4-rc1 (Jeremy Cline)
- configs: New config in drivers/bus for v5.4-rc1 (Jeremy Cline)
- Add option to allow mismatched configs on the command line (Laura Abbott)
- configs: New config in drivers/crypto for v5.4-rc1 (Jeremy Cline)
- configs: New config in sound/pci for v5.4-rc1 (Jeremy Cline)
- configs: New config in sound/soc for v5.4-rc1 (Jeremy Cline)
- gitlab: Add CI job for packaging scripts (Major Hayden)
- Speed up CI with CKI image (Major Hayden)
- Disable e1000 driver in ARK (Neil Horman)
- configs: Fix the pending default for CONFIG_ARM64_VA_BITS_52 (Jeremy Cline)
- configs: Turn on OPTIMIZE_INLINING for everything (Jeremy Cline)
- configs: Set valid pending defaults for CRYPTO_ESSIV (Jeremy Cline)
- Add an initial CI configuration for the internal branch (Jeremy Cline)
- New drop of configuration options for v5.4-rc1 (Jeremy Cline)
- New drop of configuration options for v5.4-rc1 (Jeremy Cline)
- Pull the RHEL version defines out of the Makefile (Jeremy Cline)
- Sync up the ARK build scripts (Jeremy Cline)
- Sync up the Fedora Rawhide configs (Jeremy Cline)
- Sync up the ARK config files (Jeremy Cline)
- configs: Adjust CONFIG_FORCE_MAX_ZONEORDER for Fedora (Laura Abbott)
- configs: Add README for some other arches (Laura Abbott)
- configs: Sync up Fedora configs (Laura Abbott)
- [initial commit] Add structure for building with git (Laura Abbott)
- [initial commit] Add Red Hat variables in the top level makefile (Laura Abbott)
- [initial commit] Red Hat gitignore and attributes (Laura Abbott)
- [initial commit] Add changelog (Laura Abbott)
- [initial commit] Add makefile (Laura Abbott)
- [initial commit] Add files for generating the kernel.spec (Laura Abbott)
- [initial commit] Add rpm directory (Laura Abbott)
- [initial commit] Add files for packaging (Laura Abbott)
- [initial commit] Add kabi files (Laura Abbott)
- [initial commit] Add scripts (Laura Abbott)
- [initial commit] Add configs (Laura Abbott)
- [initial commit] Add Makefiles (Laura Abbott)
# The following bit is important for automation so please do not remove
# END OF CHANGELOG
###
# The following Emacs magic makes C-c C-e use UTC dates.
# Local Variables:
# rpm-change-log-uses-utc: t
# End:
###