The CentOS Artwork Repository
=============================
Alain Reguera Delgado <al@centos.org.cu>
v1.0, Nov 2013
== Overview
Organizations have corporate identity, even when they don't take an
intentional control over it. It is a choise from the corporation to
define how much control to take over its identity. This kind of
control is expensive and not all corporations are able to maintain it.
However, it is necessary that, based on pragmatic facts, the
corporation assume an acceptable degree of compromise with its
identity in order to create a consistent idea of itself in a way that
can be progresively improved through time.
During the years (2003-2009), we've seen a growing interest inside The
CentOS Community for helping on The CentOS Project development. Some
people seem to be very clear about what the project needs are and how
to maintain it being a very stable project, but others however don't
to get what The CentOS Project is (even it is explained time after
time) and sometimes decide to put their efforts in the wrong direction
making everything to be a waste of time and source of distraction from
what is really needed.
The CentOS Artwork Repository phases the question ``What can I do
for The CentOS Project?'' by identifying different work lines
you can join in and providing automated production mechanisms that
complement one another according to each work line needs so consistent
results can be achieved inside a distributed environment under version
control. For example, consider an environment where there are graphic
designers to produce images, documentors to produce documentation
manuals (whose can use images produced by graphic designers),
programmers to produce automation scripts (needed to standardize
production tasks) and translators to localize source files created by
graphic designers, documetors and programmers. Once such environment
has been implemented, it would be possible for packagers to take
localized images and localized documentation from The CentOS Artwork
Repository (through an automation script probably) to rebrand/update
the content of those packages inside The CentOS Distribution that must
include information specific to The CentOS Project itself (e.g., boot
loader, distribution installer, release notes, display managers,
release notes, web browsers default page, etc.).
Most production tasks inside The CentOS Artwork Repository are focused
on the files needed to implement The CentOS Project corporate visual
identity.footnote:[Notice that, here, visual identity means everything
perceived through the human's visual sences (i.e., the human eyes),
but the corporate identity is a wider concept that extends to all
human senses (i.e., visibilty (eyes), audition (ears), scent (nose),
touch (fingers), and savour (tongue)), not just that one related to
visual aspects. Nevertheless, we need to be consequent with the media
where The CentOS Project manifests its existence on.] This includes
everything from file edition (e.g., text width, text indentation, line
numbering, text tabulation, etc.) up to how the web sites,
distribution, and industrial stuff (e.g., pullovers, caps,
installation media, etc.) look and feel. Notice that, more specific
details like typography, window design, icons, menu items, etc.,
inside The CentOS Distribution are already covered by The CentOS
Project upstream provider. In our effort to be 100% binary compatible
with the upstream provider and also keeping maintainance low, we stand
over those specific details as much as possible assuming them as
default. However, if you feel brave enough (and prove your ability to
keep yourself being that way) it would be possible to open a work line
for you to maintain variants of such very specific details inside The
CentOS Artwork Repository.
In addition to visual manifestations, there are also emotional
feelings and ethical behaviours that must be considered as part of The
CentOS Project corporate identity. A pleasant experience in this area
includes The CentOS Wiki, specifically the way it was conceived and
administered. When the The CentOS Wiki was published, The CentOS
Project published a list of needs with it so anyone could contribute
based on them. Not much time after that, the list of tasks triggered
some souls' motivations ruled by the good will of initiating the
translation of that content published inside the wiki, redesigning its
visual style, proposing the TreeFlower theme for The CentOS
Distribution, and reducing to zero the contraditions of precoceived
minds with respect, reason and passion. As result of this experience,
we found that The CentOS Community posseses an incredible strong
creative force, however, a long path must be traveled before it can be
focalized into the right direction because: it isn't enough just
telling what the right direction is, it is also necessary to provide
the vehicles for The CentOS Community be able of moving through it.
The CentOS Artwork Repository extends the feelings and ethicals
behaviours from The CentOS Wiki to itself by identifying the visual
manifestations The CentOS Project is made of (i.e., tracing a
direction) and allowing people to develop them through standardized
procedures inside a colaborative environment (i.e., providing the
vehicles).
Finally, if you find yourself needing to do something for The CentOS
Project and The CentOS Artwork Repository isn't the place for it, be
sure to define what that something exactly is and also make it a
community effort so it can be validated as something useful to the
community itself. Otherwise, the effort would loose its initial sense
soon enough so as to be considered seriously. Notice that the way
these needs are described may take different forms: they can be
written and organized inside a book, an article, or even a well
documented program ;-).
[[corporate-mission]]
== Repository Mission
The CentOS Artwork Repository exists to produce The CentOS Project
corporate visual identity.
== Repository Infrastructure
The CentOS Artwork Repository is made of one ``central repository''
and many ``working copies'' of that central repository. The working
copies are independent one another, can be distributed all around the
world and provide a local place for designers, documenters,
translators and programmers to perform their work in a decentralized
way. The central repository, on the other hand, provides a common
place for all independent working copies to exchange data in the
community.
image:repository-infra.png[repository-infra.png]
=== Subversion
The current infrastructure that holds The CentOS Artwork Repository on
the Internet, is made of the following components:
* http://subversion.tigris.org/[Subversion] -- Modern Version Control System designed to replace CVS.
* http://trac.edgewall.org/[Trac] -- Enhanced wiki and issue tracking system.
* Httpd+WebDav as data exchanging route between the workstations and
the central repository, through the Internet. Httpd was configured
to provide service through SSL, so all traffic between the
workstations and the server be protected while it travels across
the Internet. The access rights are controlled by using a
combination of both Subversion's authorization files and Httpd's
password files. These files can be managed consistently through
Trac's WebAdmin plug-in.
In this infrastructure, the first level of directories in the
repository provides the Subversion's standard trunk-branches-tags
layout. The second level of directories provides organization for
different work lines, as described in <<repo-convs-worklines>>. All
other subsequent directory levels from second level on exist to
organize specific concepts related to the work line they belong to.
=== Git
In addition to current Subversion infrastructure, we are working on a
Git infrastructure with the intention of migrating the current
Subversion infrastructure up to it, progressively. The Git
infrastructure we are working on is made of the following components:
* Git -- Fast version control system.
* Gitolite -- Highly flexible server for git directory version
tracker.
* Gitweb -- Simple web interface to git repositories.
* MantisBT -- Web-based issue tracking system.
* The data exchanging route between the working copies and the central
repository takes place through SSH. The access rights are controlled
by using a combination of SSH public keys and Gitolite's repository
configuration file.
In this infrastructure, the first level of directories in the
repository provides organization for different work lines, as
described in <<repo-convs-worklines>>. All other subsequent directory
levels from second level on exist to organize specific concepts
related to the work line they belong to.
[[repo-convs-worklines]]
== Repository Work Lines
The content production inside The CentOS Artwork Repository has been
divided into individual work lines that relate one another based on
the idea of doing one thing well. In this model, the content produced
individually by each work line is combined one another later to
achieve higher purposes (e.g., corporate identity for The CentOS
Project). The repository work lines, as conceived here, provide a
reliable environment for people to work synchronized and
decentralized.
The action of combining work lines inside The CentOS Artwork
Repository is also known as the ``Production Cycle'' of CentOS
corporate visual identity. The rest of this section describes the
work lines available in the repository and how they integrate one
another.
[[repo-convs-worklines-artworks]]
=== Graphic Design
Graphic Design is the first component The CentOS Artwork SIG works out
in order to produce The CentOS Project corporate visual identity.
Through this work line, graphic designers create ``design models'' and
``artistic motifs'' for all the visual manifestation The CentOS
Project is made of. Once design models and artistic motifs are set in
place, graphic designers use the *render* module of *centos-art.sh*
script to combine them all into final images.
The mission of Artworks work line is define all the visual
manifestations the The CentOS Project is made of and provide design
models and artistic motifs for them in order to produce the final
image files required to transmit the visual style that identifies The
CentOS Project as unique organization.
The graphic design process takes place in the +Artworks/+ directory
stored at the first level of the repository directory structure. This
directory organizes themes (design models and artistic models),
palettes, brushes, icons, brands and customizations for the web
environment.
To know more about The CentOS Project corporate visual identity, read
the article named
``_link:../../../Corporate/Final/en_US/index.html[The CentOS Project
Corporate Visual Identity]._''
[[repo-convs-worklines-l10n]]
=== Localization
Localization is the second component that must be worked out in the
production cycle of CentOS corporate visual identity. Through this
work line translators localize source files (e.g., SVG, DocBook, Shell
scripts) which are later used to produce localized images, localized
documentation and localized automation scripts. To localize source
files, translators use the *locale* module of *centos-art.sh* script
which takes care of retrieving translatable strings from source files
and provide a consistent localization interface based on GNU *gettext*
multi-lingual message production tool set and *xml2po* command.
The mission of Localization work line is extending the visual identity
(produced in English language) to as many native languages as
possible, in order for people which doesn't understand English
language to feel more comfortable with The CentOS Project in their own
native languages.
The localization process takes place inside the +Locales/+ directory
of each component that requires localization. This directory contains
the component related PO files organized in language-specific
directories. To know more about the specific localization process
read the *locale* module documentation.
[[repo-convs-worlines-manuals]]
=== Documentation
Documentation is the third component that must be worked out in the
production cycle of corporate visual identity. Through this work line
documenters settle down the conceptual and practical uses around The
CentOS Artwork Repository and all the content produced inside it. To
write documentation, documenters use Asciidoc as source documentation
format and the *render* module of *centos-art.sh* script to transform
Asciidoc source documentation format into final output formats,
including man pages and html.
The mission of Documentation work line is describe the standard
procedures The CentOS Artwork Repository relies on, as well as
conceive a place to help you understand what The CentOS Artwork
Repository is and what can you do with it.
The Documentation work line takes place inside the +Documentation/+
directory inside major components stored in the first directory level
of the repository (e.g., Artworks, Automation and Packages).
[[repo-convs-worlines-packages]]
=== Packages
The packages work line is the fourth component that must be worked out
in the corporate identity production cycle. Through this work line
packager gather final images, final translations and final
documentation related to artworks and put them all together inside RPM
packages. For this purpose, packagers use the *package* module of
*centos-art.sh* script which provides a consistent interface for
building packages inside the repository.
The mission of Packages work line is package the information The
CentOS Project requires to re-brand The CentOS Distribution according
Red Hat redistribution guidelines. It is also the mission of this work
line to make The CentOS Artwork Repository easy to install, configure
and use by most graphic designers, documenters, programmers and
translators.
The packages work line takes place in the +Packages/+ directory stored
at the first level of the repository directory structure. This
directory organizes both SOURCES and SPECS files used to build RPMS
and SRPMS files. In this directory, SOURCES and SPECS files are under
version control but RPMS and SRPMS produced from them are not.
[[repo-convs-worklines-scripts]]
=== Automation
The automation work line is the fifth and last component that must be
worked out in the corporate identity production cycle. This work line
closes the production cycle and provides the production standards
graphic designers, documenters, translators and packagers need to make
their work consistent and reusable. For this purpose, programmers
develop the *centos-art.sh* script.
The mission of Automation work line is standardize the interaction of
work lines in a reliable way.
The Automation work line takes place in the +Automation/+ directory
stored at the first level of the repository directory structure.
Presently, most of the automation work is done in Bash.
== Preparing Your Workstation
Once your workstation has been installed, it is time for you to
configure it. The configuration of your workstation consists on
defining your workplace, download a working copy from The CentOS Artwork Repository and
finally, run the *prepare* functionality of
*centos-art.sh* script to install/update the software
needed, render images, create links, and anything else needed.
=== Define Your Workplace
Once you've installed the workstation and it is up and running, you
need to register the user name you'll use for working. In this task
you need to use the commands *useradd* and *passwd* to create the user
name and set a password for it, respectively. These commands require
administrative privileges to be executed, so you need to login as
``root'' superuser for doing so.
[CAUTION]
Do not use the ``root'' username for regular tasks inside your working
copy of The CentOS Artwork Repository. This is dangerous and might
provoke irreversible damages to your workstation.
When you've registered your user name in the workstation, it provides
an identifier for you to open a user's session in the workstation and
a place to store the information you produce, as well. This place is
known as your home directory and is unique for each user registered in
the workstation. For example, if you register the user name john in
your workstation, your home directory would be located at
+/home/john/+.
At this point it is important to define where to download the working
copy of The CentOS Artwork Repository inside your home directory.
This decision deserves special attention and should be implemented
carefully in order to grant a standard environment that could be
distributed. Let's see some alternatives.
==== Different absolute paths
Consider that you store your working copy under
+/home/john/Projects/artwork/+ and I store mine under
+/home/al/Projects/artwork/+, we'll end up refering the same files
inside our working copies through different absolute paths. This
alternative generates a contradiction when files which hold path
information inside are committed up to the central repository from
different working copies. The contradiction comes from the question:
which is the correct absolute path to use inside such files, yours or
mine? (None of them is, of course.)
==== One unique absolute path
Another case would be that where you and I ourselves use one unique
home directory (e.g., +/home/centos/Projects/artwork/+) to store the
working copy of The CentOS Artwork Repository in our own workstations,
but configure the subversion client to use different user names to
commit changes up from the working copy to the central repository.
This alternative might be not so good in situations where you and I
have to share the same workstation. In such cases, it would be
required that we both share the password information of the same
system user (the ``centos'' user in our example) which, in addition,
gives access to that user's subversion client configuration and this
way provokes the whole sense of using different subversion credentials
for committing changes to be lost.
==== Different absolute paths, dynamic expansion, symbolic links, relative links, and environment variables
With this solution it is possible to store working copies of The
CentOS Artwork Repository on different locations inside the same
workstation without lose relation between files. Here we use the
TCAR_WORKDIR environment variable to set the location of the working
copy inside the workstation. Later the centos-art.sh scripts uses this
value as reference to determine where the working copy is. This value
is also the one used for dynamic expansion inside design models and
other similar files. In the case of web projects where different
components are required to produce the final content, we create
symbolic links between them and use relative paths so it is possible
to reuse them and retain the relation between them in different
contexts.
For example, lets consider the organization of XHTML manuals rendered
from DocBook source files. When you render a DocBook manual inside The
CentOS Artwork Repository it creates XHTML files. This XHTML files
use images and common style sheets for better presentation. Both of
these images and styles components live outside the XHTML structure
so, in order to make them available relatively to the XHTML structure,
we created symbolic links from the XHTML structure to the outside
location where they are in. The creation of symbolic links takes
place automatically when each DockBook manual is rendered through
*centos-art.sh*, which uses the value of TCAR_WORKDIR environment
variable as reference to determine the absolute path of the working
copy.
Because absolute paths are no longer stored inside permanent files and
*centos-art.sh* script uses the TCAR_WORKDIR environment variable to
determine where the working copy is stored in the workstation, it
should be safe to download working copies of The CentOS Artwork
Repository anywhere in the workstation. One just have to be sure that
the value of TCAR_WORKDIR environment variable does match the location
of the working copy you are using.
=== Download Your Working Copy
In order to use The CentOS Artwork Repository you need to download a
working copy from the central repository into your workstation. To
download such working copy use the following command:
----------------------------------------------------------------------
git clone gitolite@centos.org.cu/centos-artwork.git
----------------------------------------------------------------------
This command will create your working copy inside your home directory,
specifically in a directory named <filename
class="directory">artwork.git</filename>. Inside this directory you
will find all the files you need to work with inside The CentOS
Artwork Repository. If you want to have your working copy in a
location different to that one shown above.
The first time you download the working copy it contains no image
files, nor documentation, or localized content inside it. This is
because all the files provided in the working copy are source files
(e.g., the files needed to produce other files) and it is up to you to
render them in order to produce the final files (e.g., images and
documentation) used to implement The CentOS Project corporate visual
identity.
=== Configure Administrative Tasks
Most of the administrative tasks you need to perform in your working
copy of The CentOS Artwork Repository are standardized inside the
*prepare* functionality of *centos-art.sh* script. Inside
*centos-art.sh* script, all administrative task are invoked through
the *sudo* command. Thus, in order for the *centos-art.sh* script to
perform administrative tasks, you need to update the *sudo*'s
configuration in a way that such administrative actions be allowed.
At time of this writing the *centos-art.sh* script
implements just one administrative task, that is package management.
Nevertheless, in the future, other administrative tasks might be
included as well (e.g., installing themes locally from the working
copy for testing purposes.).
To update the *sudo*'s configuration, execute the *visudo* command as
``root''. Later, uncoment the <varname>Cmnd_Alias</varname> related
to ``SOFTWARE'' and add a line for your username allowing software
commands. This configuration is illustrated in <xref
linkend="repo-ws-config-sudoers-example" />.
[[repo-ws-config-sudoers-example]]
.The /etc/sudoers configuration file
======================================================================
----------------------------------------------------------------------
## Installation and management of software
Cmnd_Alias SOFTWARE = /bin/rpm, /usr/bin/up2date, /usr/bin/yum
## Next comes the main part: which users can run what software on
## which machines (the sudoers file can be shared between multiple
## systems).
## Syntax:
##
## user MACHINE=COMMANDS
##
## The COMMANDS section may have other options added to it.
##
## Allow root to run any commands anywhere
root ALL=(ALL) ALL
## Allow the centos user to run installation and management of
## software anywhere.
al ALL=(ALL) SOFTWARE
----------------------------------------------------------------------
======================================================================
[[repo-ws-config-runout]]
=== Run Preparation Tool
Once you've both downloaded a working copy from The CentOS Artwork
Repository and configured the *sudo* configuration file successfully,
run the *prepare* functionality of *centos-art.sh* script to complete
the configuration process using the following command:
----------------------------------------------------------------------
~/artwork/Scripts/Bash/centos-art.sh prepare
----------------------------------------------------------------------
[[repo-convs-filename-rfiles]]
== Repository File Names
Inside The CentOS Artwork Repository, file names are always written in
lowercase. Digits (e.g., 0, 1, 2), hyphen (-), dot (.) and low line
(_) characters are also accepted. In case you use hyphen and dot
characters, don't use them as first character in the file name.
=== File Names Written Correctly
The following file names are written correctly:
* +01-welcome.png+
* +splash.png+
* +anaconda_header.png+
=== File Names Written Incorrectly
* +01-Welcome.png+
* +-welcome.png+
* +Splash.png+
* +AnacondaHeader.png+
== Repository Link Names
Inside The CentOS Artwork Repository, links are always symbolic and
follow the same name convention used by regular files, as described in
<<repo-convs-filename-rfiles>>.
== Repository Directory Names
Inside The CentOS Artwork Repository, directory names are all written
capitalized and sometimes in cammel case. Digits (e.g., 0, 1, 2),
hyphen (-), dot (.) and low line (_) characters are also accepted. In
case you use hyphen and dot characters, don't use them as first
character in the directory name.
=== Directory Names Written Correctly
The following directory names are written correctly:
* +Identity+
* +Themes+
* +Motifs+
* +TreeFlower+
* +0.0.1+
* +0.0.1-35+
=== Directory Names Written Incorrectly
The following directory names are written incorrectly:
* +identity+
* +theMes+
* +MOTIFS+
* +treeFlower+
* +.0.1+
* +.0.1-35+
== Repository Directory Structure
Occasionly, you may find that new components of The CentOS Project
corporate visual identity need to be added to the repository in order
to work them out. If that is the case, the first question we need to
ask ourselves, before starting to create directories blindly all over,
is: _What is the right place to store it?_
To create a directory structure inside the repository you need to
define the concept behind it first. Later you need to create a new
directory inside the repository, remembering that there are locations
inside the repository that already define concepts you probably would
prefer to reuse. For example, the +Artworks/Themes/Motifs+ directory
stores artistic motifs of different themes, the
+Artworks/Themes/Models+ directory stores design models for themes,
the +Documentation+ directory stores documentation, +Locales+ stores
translation messages, and the +Automation+ stores automation scripts.
The best suggestion we can probably give you would be to send a mail
with your questions to the mailto:centos-devel@centos.org[CentOS
developers mailing list]
(mailto:centos-devel@centos.org[centos-devel@centos.org]). This is
the place where development of The CentOS Artwork Repository takes place and surely, in
community, it will be possible to find a place for your new component
inside the repository.
The following sub-sections describe relevant directories of The CentOS
Artwork Repository that you can use as reference to know where the
files you are looking for are stored in and where you can store new
files, as well.
=== The +Artworks/+ Directory
This directory contains files affecting the visual style of The CentOS
Project. This directory organizes Brushes, Gradients, Fonts, Palettes,
Patterns Themes and the web environment customizable files.
=== The +Artworks/Brands/+ Directory
This directory ...
=== The +Artworks/Brushes/+ Directory
This directory contains GIMP brushes. Brushes stored in this directory
will be available inside GIMP's brushes dialog.
=== The +Artworks/Documentation/+ Directory
This directory ...
=== The +Artworks/Fonts/+ Directory
This directory contains font files. Font files stored in this
directory will be available to be used from applications like GIMP and
Inkscape.
=== The +Artworks/Gradients/+ Directory
This directory contains GIMP gradients. Gradients stored in this
directory will be available inside GIMP's gradients dialog. This
directory organizes gradient files inside
=== The +Artworks/Icons/+ Directory
This directory ...
=== The +Artworks/Palettes/+ Directory
This directory ...
=== The +Artworks/Patterns/+ Directory
This directory contains GIMP patterns. Patterns stored in this
directory will be available inside GIMP's patterns dialog.
=== The +Artworks/Themes/+ Directory
This directory ...
=== The +Artworks/Webenv/+ Directory
This directory ...
=== The +Automation/+ Directory
This directory ...
== Repository Authoring
The content produced inside The CentOS Artwork Repository is copyright
of The CentOS Project. This is something you, as author, should be
aware of because you are contributing your creation's rights to
someone else; The CentOS Project in this case. This way, your work is
distributed using ``The CentOS Project'' as copyright holder, not your
name (even you remain as natural author of the work). Because The
CentOS Project is the copyright holder, is the license chosen by The
CentOS Project the one applied to your work, so it is the one you need
to agree with before making a creation inside The CentOS Artwork
Repository.
The CentOS Project is a community project controlled by its own
community of users. Inside the community, The CentOS Administrators
group is the higher authority and the only one able to set core
decision like the kind of license used inside the project and
subproject like The CentOS Artwork Repository.
The redistribution conditions of The CentOS Artwork Repository are
described in ...
== Repository Publishing
When you perform changes inside your working copy, those changes are
local to your working copy only. In order for you to share your
changes with others, you need to push them up to the central
repository the working copy you are using was initially downloaded
from. To push your changes up to the central repository see
git-push(1) man page.
Initially, you won't be able to publish your changes to The CentOS
Artwork Repository immediately. It is necessary that you prove your
interest in contributing first sending a mail to the
http://lists.centos.org/mailman/listinfo/centos-devel[CentOS
Developers mailing list]
(mailto:centos-devel@centos.org[centos-devel@centos.org]), preferably
in conjunction with a description of the changes you pretend to
commit. This restriction is necessary in order to protect the source
repository from spammers.
Once you've received access to publish your changes, they will remain
valid to you and there is no need for you to request permission to
publish new changes as long as you behave as a good cooperating
citizen.
As a good cooperating citizen one understand of a person who respects
the work already done by others and share ideas with authors before
changing relevant parts of their work, specially in situations when
the access required to realize the changes has been granted already.
Of course, there is a time when conversation has taken place already,
the paths has been traced and changing the work is so obvious that
there is no need for you to talk about it; that's because you already
did, you already built the trust to keep going. As complement, the
mailing list mentioned above is available for sharing ideas in a way
that good relationship between community citizens could be constantly
balanced.
The relationship between community citizens is monitored by repository
administrators. Repository administrators are responsible of granting
that everything goes the way it needs to go in order for The CentOS Artwork Repository to
accomplish its mission (see <<corporate-mission>>).
== Repository Copying Conditions
The CentOS Project uses The CentOS Artwork Repository to produce The
CentOS Project corporate visual identity.
The The CentOS Artwork Repository is not in the public domain; it is
copyrighted and there are restrictions on their distribution, but
these restrictions are designed to permit everything that a good
cooperating citizen would want to do. What is not allowed is to try
to prevent others from further sharing any version of this work that
they might get from you.
Specifically, we want to make sure that you have the right to give
away copies of The CentOS Artwork Repository, that you receive source
code or else can get it if you want it, that you can change this work
or use pieces of it in new free works, and that you know you can do
these things.
To make sure that everyone has such rights, we have to forbid you to
deprive anyone else of these rights. For example, if you distribute
copies of the The CentOS Artwork Repository, you must give the
recipients all the rights that you have. You must make sure that
they, too, receive or can get the source code. And you must tell them
their rights.
Also, for our own protection, we must make certain that everyone finds
out that there is no warranty for the The CentOS Artwork Repository.
If this work is modified by someone else and passed on, we want their
recipients to know that what they have is not what we distributed, so
that any problems introduced by others will not reflect on our
reputation.
The The CentOS Artwork Repository is released as a GPL work.
Individual packages used by The CentOS Artwork Repository include
their own licenses and the The CentOS Artwork Repository license
applies to all packages that it does not clash with. If there is a
clash between the The CentOS Artwork Repository license and individual
package licenses, the individual package license applies instead.
The precise conditions of the license for the The CentOS Artwork
Repository are found in (...). This manual specifically is covered by
the conditions found in (...).
[[repo-history]]
== History
=== 2008
The CentOS Artwork Repository started at
mailto:centos-devel@centos.org[The CentOS Developers Mailing List]
around 2008, on a discussion about how to automate slide images used
by Anaconda (The CentOS Distribution installer). In such discussion,
http://wiki.centos.org/RalphAngenendt[Ralph Angenendt] rose up his
hand to ask --Do you have something to show?.
To answer the question,
http://wiki.centos.org/AlainRegueraDelgado[Alain Reguera Delgado]
suggested a bash script which combined SVG and SED files in order to
produce PNG images in different languages --in conjunction with
the proposition of creating a Subversion repository where translations
and image production could be distributed inside The CentOS Community.
http://wiki.centos.org/KaranbirSingh[Karanbir Singh] considered the
idea intresting and provided the infrastructure necessary to support
the effort. This way, https://projects.centos.org/trac/artwork[The
CentOS Artwork SIG] and https://projects.centos.org/svn/artwork[The
CentOS Artwork Repository] were officially created and made world wide
available. In this configuration, users were able to register
themselves and administrators were able to assign access rights to
registered users inside The CentOS Artwork Repository, both using a
Trac web interface.
Once The CentOS Artwork Repository was available, Alain Reguera
Delgado uploaded the bash script used to produce the Anaconda
slides;footnote:[See
https://projects.centos.org/trac/artwork/browser/Main/render.sh?rev=15]
Ralph Angenendt documented it very well;footnote:[See
https://projects.centos.org/trac/artwork/wiki/HowToTranslateSlides]
and people started to download working copies of The CentOS Artwork
Repository to produce slide images in their own
languages.footnote:[See
http://www.google.com/search?q=anaconda+slides+site%3Alists.centos.org]
From this time on The CentOS Artwork Repository has been evolving into
an automated production environment where The CentOS Community can
conceive The CentOS Project corporate visual identity.
The exact changes commited to The CentOS Artwork Repository through
history can be found in the
https://projects.centos.org/trac/artwork/timeline[repository logs] so
you can know the real history about it. For those of you who just want
to get a glance of changes committed, see <<repo-history>>.
=== 2009
Around 2009, the rendition script was at a very rustic state where
only slide images could be produced, so it was redesigned to extend
the image production to other areas, different from slide images. In
this configuration, one SVG file was used as input to produce a
translated instance of it which, in turn, was used to produce one
translated PNG image as output. The SVG translated instance was
created through SED replacement commands. The translated PNG image was
created from the SVG translated instance using Inkscape command-line
interface.
The repository directory structure was prepared to receive the
rendition script using design templates and translation files in the
same location. There was one directory structure for each art work
that needed to be produced. In this configuration, if you would want
to produce the same art work with a different visual style or
structure, it was needed to create a new directory structure for it
because both the image structure and the image visual style were
together in the design template.
The rendition script was moved to a common place and linked from
different directory structures. There was no need to have the same
code in different directory structures if it could be in just one
place and then be linked from different locations.
Corporate identity concepts began to be considered. As referece, it
was used the book "Corporate Identity" by Wally Olins (1989) and
http://en.wikipedia.org/Corporate_identity[Wikipedia related links].
This way, the rendition script main's goal becomes to: _automate the
production process of a monolithic corporate visual identity
structure, based on the mission and the release schema of The CentOS
Project_.
The repository directory structures began to be documented by mean of
flat text files. Later, documentation in flat text files was moved
onto LaTeX format and this way The CentOS Artwork User Guide was
initiated.
=== 2010
Around 2010, the rendition script changed its name from *render.sh* to
*centos-art.sh* and became a collection of functionalities where
rendition was just one among others (e.g., documentation and
localization).
The *centos-art.sh* was initially conceived to automate frequent tasks
inside the repository based in the idea of Unix toolbox: to create
small and specialized tools that do one thing well. This way,
functionalities inside *centos-art.sh* began to be identified and
separated one another. For example, when images were rendered, there
was no need to load functionalities related to documentation manual.
This layout moved us onto ``common functionalities'' and ``specific
functionalities'' inside *centos-art.sh* script. Common
functionalities are loaded when *centos-art.sh* script is initiated
and are available to specific functionalities.
Suddenly, no need was found to keep all the links spreaded around the
repository in order to execute the *centos-art.sh* script from
different locations. The *centos-art* command-line interface was used
instead. The *centos-art* command-line interface is a symbolic link
stored inside the +\~/bin+ directory pointing to *centos-art.sh*
script. As default configuration, inside The CentOS Distribution, the
path to +\~/bin+ is included in the search path for commands (see PATH
environment variable). This way, using the *centos-art* command-line
interface, it is possible to execute the *centos-art.sh* script from
virtually anywhere inside the workstation, just as we frequently do
with regular commands.
Start using GNU getopt as default option parser inside the
*centos-art.sh* script.
The repository directory structure was updated to improve the
implementation of corporate visual identity concepts. Specially in
the area related to themes. Having both structure and style in the
same file introduced content duplication when producing art works.
Because of this reason, they were separated into two different
directory structures: the design models and the artistic motifs
directory structures. From this point on, the *centos-art.sh* was
able to produce themes as result of arbitrary combinations between
design models (structure) and artistic motifs (visual styles).
In the documentation area, the documents in LaTeX format were migrated
to Texinfo format. In this configuration, each directory structure in
the repository has a documentation entry associated in a Texinfo
structure which can be read, edited and administered (e.g., renamed,
deleted and copied) interactively through *centos-art.sh* script.
Additionally, the texi2html program was used to produced customized
XHTML output in conjunction with CSS from The CentOS Web Environment.
=== 2011
Around 2011, the *centos-art.sh* script was
redesigned to start translating XML-based files (e.g., SVG and Docbook
files) through *xml2po* program and shell scripts
(e.g., Bash scripts) through GNU gettext tools. This configuration
provided a stronger localization interface for graphic designers,
translators and programmers. The SED replacement files are no longer
used to handle localization.
The *render*, *help* and
*locale* functionalities consolidated themselves as
the most frequent tasks performed in The CentOS Artwork Repository working copy.
Additionally, the *prepare* and
*tuneup* functionalities were also maintained as
useful tasks.
In the documentation area, it was introduced the transformation of
localized DocBook XML DTD instances through the
*render* and *locale*
functionalities. In this configuration, you use
*locale* functionality to localize DocBook source
files to your prefered language and later, using the
*render* functionality, you can produce the
localized XTHML and PDF output as specified in a XSLT layer.
Unfortunly, the transformation DocBook XML -> FO -> PDF (through
PassiveTex) seems to be buggy inside CentOS 5.5, so it was commented
inside the *centos-art.sh* script. Most documentation
is now organized in DocBook format, even Texinfo format remains as the
only format with automated production tasks.
In the automation area, the *centos-art.sh* script
introduced the capability of reading configuration files. The main
goal here was moving some command-line options from functionalities
onto a more persistent medium. Most configuration files were set to
define the position of brands inside images and documentation manual
specific options.
[[repo-history-2012]]
=== 2012
The CentOS Artwork Repository development was eventually stopped at
November 2011 until July 2012 when we needed to make the
*centos-art.sh* script a bit more customizable than it presently was.
For example, it was considered as a need that functionalities inside
the *centos-art.sh* script must be not just conceived independent one
another but reusable in different contexts as well.
[[repo-history-2012-1]]
==== Make Localization Of *centos-art.sh* Script Specific To Different Contexts
The procedure used to locale messages inside the *centos-art.sh*
script has to be re-designed in order to accept such pluggable
behavior into the script. We couldn't publish unique
+centos-art.sh.po+ and +centos-art.sh.mo+ files because they may
contain different information in different contexts. For example, if
you are using the *render* and
*help* functionalities you only need translation
messages for them and not those from other functionalities that may
exist in the central repository but you didn't download nor use into
your working copy.
One solution for this could be to have independent PO files for each
functionality of *centos-art.sh* script which are
combined to create the final PO and MO files that
*gettext* uses to retrive translated strings
when *centos-art.sh* script is running. For this
solution to be effective, you must be selective about the
functionalities and locales directories you download into your working
copy. For example, if you want to use the render functionality and its
locale messages only, you must download the required directories and
exclude others.
[NOTE]
======================================================================
In case you don't want to be selective and download the whole
repository, the creation of the +centos-art.sh.po+,
+centos-art.sh.pot+ and
+centos-art.sh.mo+ files will occur automatically
the first time you run the *prepare* functionality
(which require the *locale* functionality to be
available), or later, by running the following command:
----------------------------------------------------------------------
centos-art locale Scripts/Bash --update
----------------------------------------------------------------------
For more information about the *prepare* and *locale* functionalities,
see their respective manuals.
======================================================================
[[repo-history-2012-2]]
.Directory structure of a rendering-only context
======================================================================
----------------------------------------------------------------------
/home/centos/Projects/artwork/
|-- Locales/
| `-- Scripts/
| `-- Bash/
| `-- es_ES/
| |-- Functions/
| | |-- Commons/
| | | |-- messages.po
| | | `-- messages.pot
| | |-- Locales/
| | | |-- messages.po
| | | `-- messages.pot
| | `-- Render/
| | |-- messages.po
| | `-- messages.pot
| |-- LC_MESSAGES/
| | `-- centos-art.sh.mo
| |-- centos-art.sh.po
| `-- centos-art.sh.pot
`-- Scripts/
`-- Bash/
|-- Functions/
| |-- Commons/
| |-- Locales/
| `-- Render/
`-- centos-art.sh
----------------------------------------------------------------------
======================================================================
As shown in <<repo-history-2012-2>>, both *Commons* and *Locales*
functionalities will always be required directories. The +Commons+
directory contains the common functionalities and the *Locales*
directory contains the standard procedures you need to run in order to
build the final +centos-art.sh.mo+ file used by *gettext* to retrive
translation strings when the *centos-art.sh* script is running.
Remember that +centos-art.sh.pot+, +centos-art.sh.po+ files aren't
under version control and they are built by combining each
funtionality message.po file into a PO and later a MO file.
A practical example of using the solution described above may be found
when you are working on the corporate identity of The CentOS Project
and then need to start a new corporate identity project for another
organization. You want to keep the directory structure of The CentOS
Artwork Repository and its automation tool, the *centos-art.sh*
script. Your new project requires you to introduce new
functionalities to *centos-art.sh* which don't fit the needs of The
CentOS Project (e.g., you want to introduce a *report* functionality
to mesure how much connect time do you consume through your PPP
internface.) or you just want to keep the directory structure of your
new project as simple as possible.
To go through this it is possible to mix specific parts of different
central repositories into one single working copy. This is the
working copy you'll use to manage your new project. In
<<repo-history-2012-1>>, we see how the +Render+, +Locales+ and
+Commons+ directories which come from the The CentOS Artwork
Repository has been integrated into the working copy of your new
project.
----------------------------------------------------------------------
/home/al/Projects/Myapp/
|-- Locales/
| `-- Scripts/
| `-- Bash/
| `-- es_ES/
| |-- Functions/
| | |-- Commons/ <--| from https://projects.centos.org/svn/artwork/
| | | |-- messages.po
| | | `-- messages.pot
| | |-- Locales/ <--| from https://projects.centos.org/svn/artwork/
| | | |-- messages.po
| | | `-- messages.pot
| | |-- Render/ <--| from https://projects.centos.org/svn/artwork/
| | | |-- messages.po
| | | `-- messages.pot
| | `-- Report/
| | |-- messages.po
| | `-- messages.pot
| |-- LC_MESSAGES/
| | `-- myapp.sh.mo
| |-- myapp.sh.po
| `-- myapp.sh.pot
`-- Scripts/
`-- Bash/
|-- Functions/
| |-- Commons/ <--| from https://projects.centos.org/svn/artwork/
| |-- Locales/ <--| from https://projects.centos.org/svn/artwork/
| |-- Render/ <--| from https://projects.centos.org/svn/artwork/
| `-- Report/
`-- myapp.sh
----------------------------------------------------------------------
At this point, your working copy contains files from two different
central repositories. One repository provides the files of your new
organization project and the other one provides the files related to
the *render* functionality from The CentOS Artwork Repository. In
this environment, all updates commited to the +Render+, +Locales+ and
+Commons+ directories at The CentOS Artwork Repository will be
available to you too, the next time you update your working copy.
Likewise, if you change something in any of these directories and
commit your changes, your changes will be available to poeple working
in The CentOS Artwork Repository the next time they update their
working copies.
Understanding the need of mixing different central repositories into a
single working copy is an important step for reusing the
functionalities that come with centos-art.sh script, but it is not
enough if you want to customize the information produced by it. By
default, the centos-art.sh script uses information related to The
CentOS Project. You probably need to change this if you are producing
images to a different organization than The CentOS Project. For
example, some of the information you might need to change would be the
copyright holder, brands, domain names, mailing lists, and so forth.
To change this information you need to duplicate the file
+centos-art.sh+ and rename it to something else. Later, you need to
edit the renamed version and change variables inside according your
needs. In <<repo-history-2012-1>>, we used the name *myapp.sh* instead
of *centos-art.sh* so the information we set inside it could reflect
the specific needs that motivated the creation of a new project
without affecting those from The CentOS Project.
Most of the information you need to change in your duplicated version
of +centos-art.sh+ file is controlled by a set of read-only variables.
You modify these variables here and they will be available all along
the script execution time. For example, you can change the value of
CLI_WRKCOPY variable inside your duplicated version of +centos-art.sh+
to change the absolute path you use to store your working copy.
==== Enhance The CentOS Logo Construction
The CentOS Logo is made of two different components known as The
CentOS Symbol and The CentOS Type. Presently (at the end of
September), to produce these components, we create one SVG image for
each PNG image we want to produce, store it in
+Identity/Models/Brands/Logos+ directory structure and run the
command:
----------------------------------------------------------------------
centos-art render Identity/Images/Brands/Logos*
----------------------------------------------------------------------
This model works and scales well in situations when there isn't a need
to reuse final images among themselves. However, when you need to
reuse images among themselves, a better solution is required. The goal
here would be: don't create SVG images for PNG
images you can build based on other PNG images.
This might be achieved through one of the following ways:
- Create a new specific functionality to achieved the goal. Needed
because the *render* specific functionality uses SVG files as
reference to build images (i.e., one SVG image produces one PNG
image).
- Modify *render* functionality to work in different modes based on
file type or file extension. The first mode would use SVG files as
reference to build PNG images (just as it was doing so far). The
second mode would use a configuration file named +render.conf+ as
reference inside the design models directory you want to produce
images for so as to build the related PNG images. In this second
case, the configuration file specifies how final PNG images will be
produced (e.g., by appending or overlapping them one another).
For example, consider the following command-line:
----------------------------------------------------------------------
centos-art render Identity/Images/Brands/Logos
----------------------------------------------------------------------
This command should evaluate which type of rendition will be done,
based on whether the source file is a scalable vector graphic (SVG) or
a configuration file. To make this decision, the *centos-art.sh*
script looks for SVG files first, and configuration files later. When
SVG files are found, the *centos-art.sh* script uses a list of SVG
files and process them one by one excluding any related configuration
file that could exist. On the other hand, if no SVG file is found
inside the related design model directory structure, the
*centos-art.sh* script will use the configuration file with the name
+render.conf+ to create images as specified inside it. When neither a
SVG or a configuration file is found inside the design model directory
structure, the *centos-art.sh* script finishes its execution without
any error message. For example, if no SVG file is found inside
+Identity/Models/Brands/Logos/+ directory and the
+Identity/Models/Brands/Logos/images.conf+ configuration file exists
therein with the following content:
----------------------------------------------------------------------
[centos.png]
models = "Identity/Models/Brands/Symbols/centos-symbol-forlogos.svgz Identity/Models/Brands/Types/centos.svgz"
formats = "xpm jpg"
heights = "48 78"
fgcolor = "000000 ffffff"
bgcolor = "ffffff-0"
command = "/usr/bin/convert +append"
[centos-artwork.png]
models = "Identity/Models/Brands/Symbols/centos-symbol-forlogos.svgz Identity/Models/Brands/Types/centos.svgz Identity/Models/Brands/Types/artwork.svgz"
formats = "xpm jpg"
heights = "48 78"
fgcolor = "000000 ffffff"
bgcolor = "ffffff-0"
command = "/usr/bin/convert +append"
----------------------------------------------------------------------
The *centos-art.sh* script should produce the
following image files:
----------------------------------------------------------------------
Identity/Images/Brands/Logos/000000/ffffff-0/48/centos.jpg
Identity/Images/Brands/Logos/000000/ffffff-0/48/centos.png
Identity/Images/Brands/Logos/000000/ffffff-0/48/centos.xpm
Identity/Images/Brands/Logos/000000/ffffff-0/48/centos-artwork.png
Identity/Images/Brands/Logos/000000/ffffff-0/48/centos-artwork.jpg
Identity/Images/Brands/Logos/000000/ffffff-0/48/centos-artwork.xmp
Identity/Images/Brands/Logos/000000/ffffff-0/78/centos.jpg
Identity/Images/Brands/Logos/000000/ffffff-0/78/centos.png
Identity/Images/Brands/Logos/000000/ffffff-0/78/centos.xpm
Identity/Images/Brands/Logos/000000/ffffff-0/78/centos-artwork.png
Identity/Images/Brands/Logos/000000/ffffff-0/78/centos-artwork.jpg
Identity/Images/Brands/Logos/000000/ffffff-0/78/centos-artwork.xmp
Identity/Images/Brands/Logos/ffffff/ffffff-0/48/centos.jpg
Identity/Images/Brands/Logos/ffffff/ffffff-0/48/centos.png
Identity/Images/Brands/Logos/ffffff/ffffff-0/48/centos.xpm
Identity/Images/Brands/Logos/ffffff/ffffff-0/48/centos-artwork.png
Identity/Images/Brands/Logos/ffffff/ffffff-0/48/centos-artwork.jpg
Identity/Images/Brands/Logos/ffffff/ffffff-0/48/centos-artwork.xmp
Identity/Images/Brands/Logos/ffffff/ffffff-0/78/centos.jpg
Identity/Images/Brands/Logos/ffffff/ffffff-0/78/centos.png
Identity/Images/Brands/Logos/ffffff/ffffff-0/78/centos.xpm
Identity/Images/Brands/Logos/ffffff/ffffff-0/78/centos-artwork.png
Identity/Images/Brands/Logos/ffffff/ffffff-0/78/centos-artwork.jpg
Identity/Images/Brands/Logos/ffffff/ffffff-0/78/centos-artwork.xmp
----------------------------------------------------------------------
The final location for storing images output inside the repository is
determined by using the design model directory provided as argument.
Basically, the *centos-art.sh* script changes the
path components from Models to Images and adds foreground color,
background color, height value and image name to it to differentiate
rendered images.
In case you need to restrict the amount of files you want to produce
including their formats, heights, colors and commands, you need to
modify the content of the related +render.conf+ configuration file.
There is not any command-line option available for such tasks. The
most *render* command-line options can do for you is when there are
more than one configuration file inside the same design model
directory and you need to specify which one of them will be used as
reference. In such case you can use the
<option>--filter="REGEX"</option> option.
When images are produced through configuration files, the
*centos-art.sh* script takes the order provided in
the list of design models to build the list of images you will work
with through the command specified. For example, the order in which
images will be appended or overlapped.
Localization of logo images will not be and must not be supported in
any way. That would bring disastrous confusion in the area of visual
recognition.
=== 2013
Development of CentOS Artwork Repository was eventually stopped at
November, 2012, when I moved myself from Cienfuegos to Havana city for
working. I returned on May 14th of 2013 and continued developing The
CentOS Artwork Repository at home. Considered a
Git+Gitolite+Gitweb+MantisBT infrastructure for CentOS Artwork
Repository and started working on it in my workstation. This, in
order to implement a distributed work flow for The CentOS Artwork
Repository based on Git version control system.
[[repository-history-2013-UpdateRepositoryLayout]]
==== Update Repository Directories Structure
I face the following situation: I am working on a documentation
project named ``solinfo-network''. While I was organizing it, I found
that the directory structure of The CentOS Artwork Repository fits
quite well the needs of ``solinfo-network'' documentation project.
However, I don't want to duplicate automation scripts in two separate
projects, but share them between themselves (i.e., changes committed
to automation scripts are pushed to one single place, not two.).
When we use Subversion repositories, it is possible to checkout
specific parts of different repositories into a new repository. This
is very useful if we need to create several projects that share the
same component and we don't want to duplicate the common component in
two or more different projects but ``share'' it between them.
When we use Git repository, it is not possible to checkout specific
parts of a repository but the complete tree. So, in order to share
common components of a repository we need to create one repository for
each common component we want to share and then use Git
submodules<citation>see progit-book, page 152.</citation> This
requires that brand new repositories be created for each component we
want to share.
In both situations, including Git and Subversion repositories, it is
necessary that we define very well the structure of each component we
want to share, so it can be ``plugged'' nicely into other projects.
Likewise, other projects must have the same directory structure the
pluggable component was design to fit in. If these two conditions can
be reached, it would be possible to reuse repositories components and
concentrate efforts. The current directory structure The CentOS
Artwork Repository is set in allows components inside Subversion
repositories to be reused by related working copies. However, we
cannot do the same if it is stored in a Git repository. In order for
Git repositories to be able to share components with other Git
repositories, The CentOS Artwork Repository directory structure needs
to be reorganized to better delineate each component the repository is
made of.
// vim: set syntax=asciidoc: