From 8b7da9c093c80844ccbf7f5031a91bd1669ed4f0 Mon Sep 17 00:00:00 2001 From: Gabriel Becker Date: Thu, 20 May 2021 13:16:07 +0200 Subject: [PATCH] Add kickstart files for RHEL7 STIG and STIG with GUI. --- rhel7/kickstart/ssg-rhel7-stig-ks.cfg | 129 ++++++++++++++++++++++ rhel7/kickstart/ssg-rhel7-stig_gui-ks.cfg | 128 +++++++++++++++++++++ 2 files changed, 257 insertions(+) create mode 100644 rhel7/kickstart/ssg-rhel7-stig-ks.cfg create mode 100644 rhel7/kickstart/ssg-rhel7-stig_gui-ks.cfg diff --git a/rhel7/kickstart/ssg-rhel7-stig-ks.cfg b/rhel7/kickstart/ssg-rhel7-stig-ks.cfg new file mode 100644 index 00000000000..68b777c8337 --- /dev/null +++ b/rhel7/kickstart/ssg-rhel7-stig-ks.cfg @@ -0,0 +1,129 @@ +# Install a fresh new system (optional) +install + +# Specify installation method to use for installation +# To use a different one comment out the 'url' one below, update +# the selected choice with proper options & un-comment it +# +# Install from an installation tree on a remote server via FTP or HTTP: +# --url the URL to install from +# +# Example: +# +# url --url=http://192.168.122.1/image +# +# Modify concrete URL in the above example appropriately to reflect the actual +# environment machine is to be installed in +# +# Other possible / supported installation methods: +# * install from the first CD-ROM/DVD drive on the system: +# +# cdrom +# +# * install from a directory of ISO images on a local drive: +# +# harddrive --partition=hdb2 --dir=/tmp/install-tree +# +# * install from provided NFS server: +# +# nfs --server= --dir= [--opts=] +# + +# Set language to use during installation and the default language to use on the installed system (required) +lang en_US.UTF-8 + +# Set system keyboard type / layout (required) +keyboard us + +# Configure network information for target system and activate network devices in the installer environment (optional) +# --onboot enable device at a boot time +# --device device to be activated and / or configured with the network command +# --bootproto method to obtain networking configuration for device (default dhcp) +# --noipv6 disable IPv6 on this device +# +# NOTE: Usage of DHCP will fail CCE-27021-5 (DISA FSO RHEL-06-000292). To use static IP configuration, +# "--bootproto=static" must be used. For example: +# network --bootproto=static --ip=10.0.2.15 --netmask=255.255.255.0 --gateway=10.0.2.254 --nameserver 192.168.2.1,192.168.3.1 +# +network --onboot yes --device eth0 --bootproto dhcp --noipv6 + +# Set the system's root password (required) +# Plaintext password is: server +# Refer to e.g. http://fedoraproject.org/wiki/Anaconda/Kickstart#rootpw to see how to create +# encrypted password form for different plaintext password +rootpw --iscrypted $6$rhel6usgcb$aS6oPGXcPKp3OtFArSrhRwu6sN8q2.yEGY7AIwDOQd23YCtiz9c5mXbid1BzX9bmXTEZi.hCzTEXFosVBI5ng0 + +# Configure firewall settings for the system (optional) +# --enabled reject incoming connections that are not in response to outbound requests +# --ssh allow sshd service through the firewall +firewall --enabled --ssh + +# Set up the authentication options for the system (required) +# --enableshadow enable shadowed passwords by default +# --passalgo hash / crypt algorithm for new passwords +# See the manual page for authconfig for a complete list of possible options. +authconfig --enableshadow --passalgo=sha512 + +# State of SELinux on the installed system (optional) +# Defaults to enforcing +selinux --enforcing + +# Set the system time zone (required) +timezone --utc America/New_York + +# Specify how the bootloader should be installed (required) +# Plaintext password is: password +# Refer to e.g. http://fedoraproject.org/wiki/Anaconda/Kickstart#rootpw to see how to create +# encrypted password form for different plaintext password +bootloader --location=mbr --append="crashkernel=auto rhgb quiet" --password=$6$rhel6usgcb$kOzIfC4zLbuo3ECp1er99NRYikN419wxYMmons8Vm/37Qtg0T8aB9dKxHwqapz8wWAFuVkuI/UJqQBU92bA5C0 + +# Initialize (format) all disks (optional) +zerombr + +# The following partition layout scheme assumes disk of size 20GB or larger +# Modify size of partitions appropriately to reflect actual machine's hardware +# +# Remove Linux partitions from the system prior to creating new ones (optional) +# --linux erase all Linux partitions +# --initlabel initialize the disk label to the default based on the underlying architecture +clearpart --linux --initlabel + +# Create primary system partitions (required for installs) +part /boot --fstype=xfs --size=512 +part pv.01 --grow --size=1 + +# Create a Logical Volume Management (LVM) group (optional) +volgroup VolGroup --pesize=4096 pv.01 + +# Create particular logical volumes (optional) +logvol / --fstype=xfs --name=LogVol06 --vgname=VolGroup --size=12288 --grow +# CCE-26557-9: Ensure /home Located On Separate Partition +logvol /home --fstype=xfs --name=LogVol02 --vgname=VolGroup --size=1024 --fsoptions="nodev" +# CCE-26435-8: Ensure /tmp Located On Separate Partition +logvol /tmp --fstype=xfs --name=LogVol01 --vgname=VolGroup --size=1024 --fsoptions="nodev,noexec,nosuid" +# CCE-26639-5: Ensure /var Located On Separate Partition +logvol /var --fstype=xfs --name=LogVol03 --vgname=VolGroup --size=2048 --fsoptions="nodev" +# CCE-26215-4: Ensure /var/log Located On Separate Partition +logvol /var/log --fstype=xfs --name=LogVol04 --vgname=VolGroup --size=1024 --fsoptions="nodev" +# CCE-26436-6: Ensure /var/log/audit Located On Separate Partition +logvol /var/log/audit --fstype=xfs --name=LogVol05 --vgname=VolGroup --size=512 --fsoptions="nodev" +logvol swap --name=lv_swap --vgname=VolGroup --size=2016 + +# The full id of DISA STIG profile is used because otherwise there would be +# a conflict with rhelh-stig. +%addon org_fedora_oscap + content-type = scap-security-guide + profile = xccdf_org.ssgproject.content_profile_stig +%end + +# Packages selection (%packages section is required) +%packages + +# Require @Base +@Base + +%end # End of %packages section + +# Reboot after the installation is complete (optional) +# --eject attempt to eject CD or DVD media before rebooting +reboot --eject diff --git a/rhel7/kickstart/ssg-rhel7-stig_gui-ks.cfg b/rhel7/kickstart/ssg-rhel7-stig_gui-ks.cfg new file mode 100644 index 00000000000..55f74479fda --- /dev/null +++ b/rhel7/kickstart/ssg-rhel7-stig_gui-ks.cfg @@ -0,0 +1,128 @@ +# Install a fresh new system (optional) +install + +# Specify installation method to use for installation +# To use a different one comment out the 'url' one below, update +# the selected choice with proper options & un-comment it +# +# Install from an installation tree on a remote server via FTP or HTTP: +# --url the URL to install from +# +# Example: +# +# url --url=http://192.168.122.1/image +# +# Modify concrete URL in the above example appropriately to reflect the actual +# environment machine is to be installed in +# +# Other possible / supported installation methods: +# * install from the first CD-ROM/DVD drive on the system: +# +# cdrom +# +# * install from a directory of ISO images on a local drive: +# +# harddrive --partition=hdb2 --dir=/tmp/install-tree +# +# * install from provided NFS server: +# +# nfs --server= --dir= [--opts=] +# + +# Set language to use during installation and the default language to use on the installed system (required) +lang en_US.UTF-8 + +# Set system keyboard type / layout (required) +keyboard us + +# Configure network information for target system and activate network devices in the installer environment (optional) +# --onboot enable device at a boot time +# --device device to be activated and / or configured with the network command +# --bootproto method to obtain networking configuration for device (default dhcp) +# --noipv6 disable IPv6 on this device +# +# NOTE: Usage of DHCP will fail CCE-27021-5 (DISA FSO RHEL-06-000292). To use static IP configuration, +# "--bootproto=static" must be used. For example: +# network --bootproto=static --ip=10.0.2.15 --netmask=255.255.255.0 --gateway=10.0.2.254 --nameserver 192.168.2.1,192.168.3.1 +# +network --onboot yes --device eth0 --bootproto dhcp --noipv6 + +# Set the system's root password (required) +# Plaintext password is: server +# Refer to e.g. http://fedoraproject.org/wiki/Anaconda/Kickstart#rootpw to see how to create +# encrypted password form for different plaintext password +rootpw --iscrypted $6$rhel6usgcb$aS6oPGXcPKp3OtFArSrhRwu6sN8q2.yEGY7AIwDOQd23YCtiz9c5mXbid1BzX9bmXTEZi.hCzTEXFosVBI5ng0 + +# Configure firewall settings for the system (optional) +# --enabled reject incoming connections that are not in response to outbound requests +# --ssh allow sshd service through the firewall +firewall --enabled --ssh + +# Set up the authentication options for the system (required) +# --enableshadow enable shadowed passwords by default +# --passalgo hash / crypt algorithm for new passwords +# See the manual page for authconfig for a complete list of possible options. +authconfig --enableshadow --passalgo=sha512 + +# State of SELinux on the installed system (optional) +# Defaults to enforcing +selinux --enforcing + +# Set the system time zone (required) +timezone --utc America/New_York + +# Specify how the bootloader should be installed (required) +# Plaintext password is: password +# Refer to e.g. http://fedoraproject.org/wiki/Anaconda/Kickstart#rootpw to see how to create +# encrypted password form for different plaintext password +bootloader --location=mbr --append="crashkernel=auto rhgb quiet" --password=$6$rhel6usgcb$kOzIfC4zLbuo3ECp1er99NRYikN419wxYMmons8Vm/37Qtg0T8aB9dKxHwqapz8wWAFuVkuI/UJqQBU92bA5C0 + +# Initialize (format) all disks (optional) +zerombr + +# The following partition layout scheme assumes disk of size 20GB or larger +# Modify size of partitions appropriately to reflect actual machine's hardware +# +# Remove Linux partitions from the system prior to creating new ones (optional) +# --linux erase all Linux partitions +# --initlabel initialize the disk label to the default based on the underlying architecture +clearpart --linux --initlabel + +# Create primary system partitions (required for installs) +part /boot --fstype=xfs --size=512 +part pv.01 --grow --size=1 + +# Create a Logical Volume Management (LVM) group (optional) +volgroup VolGroup --pesize=4096 pv.01 + +# Create particular logical volumes (optional) +logvol / --fstype=xfs --name=LogVol06 --vgname=VolGroup --size=12288 --grow +# CCE-26557-9: Ensure /home Located On Separate Partition +logvol /home --fstype=xfs --name=LogVol02 --vgname=VolGroup --size=1024 --fsoptions="nodev" +# CCE-26435-8: Ensure /tmp Located On Separate Partition +logvol /tmp --fstype=xfs --name=LogVol01 --vgname=VolGroup --size=1024 --fsoptions="nodev,noexec,nosuid" +# CCE-26639-5: Ensure /var Located On Separate Partition +logvol /var --fstype=xfs --name=LogVol03 --vgname=VolGroup --size=2048 --fsoptions="nodev" +# CCE-26215-4: Ensure /var/log Located On Separate Partition +logvol /var/log --fstype=xfs --name=LogVol04 --vgname=VolGroup --size=1024 --fsoptions="nodev" +# CCE-26436-6: Ensure /var/log/audit Located On Separate Partition +logvol /var/log/audit --fstype=xfs --name=LogVol05 --vgname=VolGroup --size=512 --fsoptions="nodev" +logvol swap --name=lv_swap --vgname=VolGroup --size=2016 + +%addon org_fedora_oscap + content-type = scap-security-guide + profile = xccdf_org.ssgproject.content_profile_stig_gui +%end + +# Packages selection (%packages section is required) +%packages +# Graphical User Interface package group +@^graphical-server-environment +# Require @Base +@Base + +%end # End of %packages section + +# Reboot after the installation is complete (optional) +# --eject attempt to eject CD or DVD media before rebooting +reboot --eject