pyproject RPM macros
====================
These macros allow projects that follow the Python [packaging specifications]
to be packaged as RPMs.
They are still *provisional*: we can make non-backwards-compatible changes to
the API.
Please subscribe to Fedora's [python-devel list] if you use the macros.
They work for:
* traditional Setuptools-based projects that use the `setup.py` file,
* newer Setuptools-based projects that have a `setup.cfg` file,
* general Python projects that use the [PEP 517] `pyproject.toml` file (which allows using any build system, such as setuptools, flit or poetry).
These macros replace `%py3_build` and `%py3_install`, which only work with `setup.py`.
[packaging specifications]: https://packaging.python.org/specifications/
[python-devel list]: https://lists.fedoraproject.org/archives/list/python-devel@lists.fedoraproject.org/
Usage
-----
To use these macros, first BuildRequire them:
BuildRequires: pyproject-rpm-macros
Also BuildRequire the devel package for the Python you are building against.
In Fedora, that's `python3-devel`.
(In the future, we plan to make `python3-devel` itself require
`pyproject-rpm-macros`.)
Next, you need to generate more build dependencies (of your projects and
the macros themselves) by running `%pyproject_buildrequires` in the
`%generate_buildrequires` section:
%generate_buildrequires
%pyproject_buildrequires
This will add build dependencies according to [PEP 517] and [PEP 518].
To also add run-time and test-time dependencies, see the section below.
If you need more dependencies, such as non-Python libraries, BuildRequire
them manually.
Note that `%generate_buildrequires` may produce error messages `(exit 11)` in
the build log. This is expected behavior of BuildRequires generators; see
[the Fedora change] for details.
[the Fedora change]: https://fedoraproject.org/wiki/Changes/DynamicBuildRequires
Then, build a wheel in `%build` with `%pyproject_wheel`:
%build
%pyproject_wheel
And install the wheel in `%install` with `%pyproject_install`:
%install
%pyproject_install
`%pyproject_install` installs all wheels in `pyproject-wheeldir/` located in the root of the source tree.
Adding run-time and test-time dependencies
------------------------------------------
To run tests in the `%check` section, the package's runtime dependencies
often need to also be included as build requirements.
This can be done using the `-r` flag:
%generate_buildrequires
%pyproject_buildrequires -r
For this to work, the project's build system must support the
[`prepare-metadata-for-build-wheel` hook](https://www.python.org/dev/peps/pep-0517/#prepare-metadata-for-build-wheel).
The popular buildsystems (setuptools, flit, poetry) do support it.
For projects that specify test requirements using an [`extra`
provide](https://packaging.python.org/specifications/core-metadata/#provides-extra-multiple-use),
these can be added using the `-x` flag.
Multiple extras can be supplied by repeating the flag or as a comma separated list.
For example, if upstream suggests installing test dependencies with
`pip install mypackage[testing]`, the test deps would be generated by:
%generate_buildrequires
%pyproject_buildrequires -x testing
For projects that specify test requirements in their [tox] configuration,
these can be added using the `-t` flag (default tox environment)
or the `-e` flag followed by the tox environment.
The default tox environment (such as `py37` assuming the Fedora's Python version is 3.7)
is available in the `%{toxenv}` macro.
For example, if upstream suggests running the tests on Python 3.7 with `tox -e py37`,
the test deps would be generated by:
%generate_buildrequires
%pyproject_buildrequires -t
If upstream uses a custom derived environment, such as `py37-unit`, use:
%pyproject_buildrequires -e %{toxenv}-unit
Or specify more environments if needed:
%pyproject_buildrequires -e %{toxenv}-unit,%{toxenv}-integration
The `-e` option redefines `%{toxenv}` for further reuse.
Use `%{default_toxenv}` to get the default value.
The `-t`/`-e` option uses [tox-current-env]'s `--print-deps-to-file` behind the scenes.
If your package specifies some tox plugins in `tox.requires`,
such plugins will be BuildRequired as well.
Not all plugins are guaranteed to play well with [tox-current-env],
in worst case, patch/sed the requirement out from the tox configuration.
Note that both `-x` and `-t` imply `-r`,
because runtime dependencies are always required for testing.
[tox]: https://tox.readthedocs.io/
[tox-current-env]: https://github.com/fedora-python/tox-current-env/
Additionally to generated requirements you can supply multiple file names to `%pyproject_buildrequires` macro.
Dependencies will be loaded from them:
%pyproject_buildrequires -r requirements/tests.in requirements/docs.in requirements/dev.in
For packages not using build system you can use `-N` to entirely skip automatical
generation of requirements and install requirements only from manually specified files.
`-N` option cannot be used in combination with other options mentioned above
(`-r`, `-e`, `-t`, `-x`).
Running tox based tests
-----------------------
In case you want to run the tests as specified in [tox] configuration,
you must use `%pyproject_buildrequires` with `-t` or `-e` as explained above.
Then, use the `%tox` macro in `%check`:
%check
%tox
The macro:
- Always prepends `$PATH` with `%{buildroot}%{_bindir}`
- If not defined, sets `$PYTHONPATH` to `%{buildroot}%{python3_sitearch}:%{buildroot}%{python3_sitelib}`
- If not defined, sets `$TOX_TESTENV_PASSENV` to `*`
- Runs `tox` with `-q` (quiet), `--recreate` and `--current-env` (from [tox-current-env]) flags
- Implicitly uses the tox environment name stored in `%{toxenv}` - as overridden by `%pyproject_buildrequires -e`
By using the `-e` flag, you can use a different tox environment(s):
%check
%tox
%if %{with integration_test}
%tox -e %{default_toxenv}-integration
%endif
If you wish to provide custom `tox` flags or arguments, add them after `--`:
%tox -- --flag-for-tox
If you wish to pass custom `posargs` to tox, use another `--`:
%tox -- --flag-for-tox -- --flag-for-posargs
Or (note the two sequential `--`s):
%tox -- -- --flag-for-posargs
Generating the %files section
-----------------------------
To generate the list of files in the `%files` section, you can use `%pyproject_save_files` after the `%pyproject_install` macro.
It takes toplevel module names (i.e. the names used with `import` in Python) and stores paths for those modules and metadata for the package (dist-info directory) to a file stored at `%{pyproject_files}`.
For example, if a package provides the modules `requests` and `_requests`, write:
%install
%pyproject_install
%pyproject_save_files requests _requests
To add listed files to the `%files` section, use `%files -f %{pyproject_files}`.
Note that you still need to add any documentation manually (for now).
%files -n python3-requests -f %{pyproject_files}
%doc README.rst
You can use globs in the module names if listing them explicitly would be too tedious:
%install
%pyproject_install
%pyproject_save_files '*requests'
In fully automated environments, you can use the `*` glob to include all modules (put it in single quotes to prevent Shell from expanding it). In Fedora however, you should always use a more specific glob to avoid accidentally packaging unwanted files (for example, a top level module named `test`).
Speaking about automated environments, some files cannot be classified with `%pyproject_save_files`, but it is possible to list all unclassified files by adding a special `+auto` argument.
%install
%pyproject_install
%pyproject_save_files '*' +auto
%files -n python3-requests -f %{pyproject_files}
However, in Fedora packages, always list executables explicitly to avoid unintended collisions with other packages or accidental missing executables:
%install
%pyproject_install
%pyproject_save_files requests _requests
%files -n python3-requests -f %{pyproject_files}
%doc README.rst
%{_bindir}/downloader
`%pyproject_save_files` can automatically mark license files with `%license` macro
and language (`*.mo`) files with `%lang` macro and appropriate language code.
Only license files declared via [PEP 639] `License-Field` field are detected.
[PEP 639] is still a draft and can be changed in the future.
Note that `%pyproject_save_files` uses data from the [RECORD file](https://www.python.org/dev/peps/pep-0627/).
If you wish to rename, remove or otherwise change the installed files of a package
*after* `%pyproject_install`, `%pyproject_save_files` might break.
If possible, remove/rename such files in `%prep`.
If not possible, avoid using `%pyproject_save_files` or edit/replace `%{pyproject_files}`.
Generating Extras subpackages
-----------------------------
The `%pyproject_extras_subpkg` macro generates simple subpackage(s)
for Python extras.
The macro should be placed after the base package's `%description` to avoid
issues in building the SRPM.
For example, if the `requests` project's metadata defines the extras
`security` and `socks`, the following invocation will generate the subpackage
`python3-requests+security` that provides `python3dist(requests[security])`,
and a similar one for `socks`.
%pyproject_extras_subpkg -n python3-requests security socks
The macro works like `%python_extras_subpkg`,
except the `-i`/`-f`/`-F` arguments are optional and discouraged.
A filelist written by `%pyproject_install` is used by default.
For more information on `%python_extras_subpkg`, see the [Fedora change].
[Fedora change]: https://fedoraproject.org/wiki/Changes/PythonExtras
These arguments are still required:
* -n: name of the “base” package (e.g. python3-requests)
* Positional arguments: the extra name(s).
Multiple subpackages are generated when multiple names are provided.
Limitations
-----------
`%pyproject_install` changes shebang lines of every Python script in `%{buildroot}%{_bindir}` to `#!%{__python3} %{py3_shbang_opt}` (`#!/usr/bin/python3 -s`).
Existing Python flags in shebangs are preserved.
For example `#!/usr/bin/python3 -Ru` will be updated to `#!/usr/bin/python3 -sRu`.
Sometimes, this can interfere with tests that run such scripts directly by name,
because in tests we usually rely on `PYTHONPATH` (and `-s` ignores that).
Would this behavior be undesired for any reason,
undefine `%{py3_shbang_opt}` to turn it off.
Some valid Python version specifiers are not supported.
When a dependency is specified via an URL or local path, for example as:
https://github.com/ActiveState/appdirs/archive/8eacfa312d77aba28d483fbfb6f6fc54099622be.zip
/some/path/foo-1.2.3.tar.gz
git+https://github.com/sphinx-doc/sphinx.git@96dbe5e3
The `%pyproject_buildrequires` macro is unable to convert it to an appropriate RPM requirement and will fail.
If the URL contains the `packageName @` prefix as specified in [PEP 508],
the requirement will be generated without a version constraint:
appdirs@https://github.com/ActiveState/appdirs/archive/8eacfa312d77aba28d483fbfb6f6fc54099622be.zip
foo@file:///some/path/foo-1.2.3.tar.gz
Will be converted to:
python3dist(appdirs)
python3dist(foo)
Alternatively, when an URL requirement parsed from a text file
given as positional argument to `%pyproject_buildrequires`
contains the `#egg=packageName` fragment,
as documented in [pip's documentation]:
git+https://github.com/sphinx-doc/sphinx.git@96dbe5e3#egg=sphinx
The requirements will be converted to package names without versions, e.g.:
python3dist(sphinx)
However upstreams usually only use direct URLs for their requirements as workarounds,
so be prepared for problems.
[PEP 508]: https://www.python.org/dev/peps/pep-0508/
[PEP 517]: https://www.python.org/dev/peps/pep-0517/
[PEP 518]: https://www.python.org/dev/peps/pep-0518/
[PEP 639]: https://www.python.org/dev/peps/pep-0639/
[pip's documentation]: https://pip.pypa.io/en/stable/cli/pip_install/#vcs-support
Testing the macros
------------------
This repository has two kinds of tests.
First, there is RPM `%check` section, run when building the `python-rpm-macros`
package.
Then there are CI tests.
There is currently [no way to run Fedora CI tests locally][ci-rfe],
but you can do what the tests do manually using mock.
For each `$PKG.spec` in `tests/`:
- clean your mock environment:
mock -r fedora-rawhide-x86_64 clean
- install the version of `python-rpm-macros` you're testing, e.g.:
mock -r fedora-rawhide-x86_64 install .../python-rpm-macros-*.noarch.rpm
- download the sources:
spectool -g -R $PKG.spec
- build a SRPM:
rpmbuild -bs $PKG.spec
- build in mock, using the path from the command above as `$SRPM`:
mock -r fedora-rawhide-x86_64 -n -N $SRPM
[ci-rfe]: https://pagure.io/fedora-ci/general/issue/4