diff -up openssl-3.0.0/apps/fipsinstall.c.xxx openssl-3.0.0/apps/fipsinstall.c

--- openssl-3.0.0/apps/fipsinstall.c.xxx	2021-11-22 13:09:28.232560235 +0100

+++ openssl-3.0.0/apps/fipsinstall.c	2021-11-22 13:12:22.272058910 +0100

@@ -311,6 +311,9 @@ int fipsinstall_main(int argc, char **ar

     EVP_MAC *mac = NULL;

     CONF *conf = NULL;

+    BIO_printf(bio_err, "This command is not enabled in the Red Hat Enterprise Linux OpenSSL build, please consult Red Hat documentation to learn how to enable FIPS mode\n");

+    return 1;

+

     if ((opts = sk_OPENSSL_STRING_new_null()) == NULL)

         goto end;

diff -up openssl-3.0.0/doc/man1/openssl-fipsinstall.pod.in.xxx openssl-3.0.0/doc/man1/openssl-fipsinstall.pod.in

--- openssl-3.0.0/doc/man1/openssl-fipsinstall.pod.in.xxx	2021-11-22 13:19:55.192959061 +0100

+++ openssl-3.0.0/doc/man1/openssl-fipsinstall.pod.in	2021-11-22 13:20:56.978491104 +0100

@@ -8,224 +8,10 @@ openssl-fipsinstall - perform FIPS confi

 =head1 SYNOPSIS

 B<openssl fipsinstall>

-[B<-help>]

-[B<-in> I<configfilename>]

-[B<-out> I<configfilename>]

-[B<-module> I<modulefilename>]

-[B<-provider_name> I<providername>]

-[B<-section_name> I<sectionname>]

-[B<-verify>]

-[B<-mac_name> I<macname>]

-[B<-macopt> I<nm>:I<v>]

-[B<-noout>]

-[B<-quiet>]

-[B<-no_conditional_errors>]

-[B<-no_security_checks>]

-[B<-self_test_onload>]

-[B<-corrupt_desc> I<selftest_description>]

-[B<-corrupt_type> I<selftest_type>]

-[B<-config> I<parent_config>]

 =head1 DESCRIPTION

-This command is used to generate a FIPS module configuration file.

-This configuration file can be used each time a FIPS module is loaded

-in order to pass data to the FIPS module self tests. The FIPS module always

-verifies its MAC, but optionally only needs to run the KAT's once,

-at installation.

-

-The generated configuration file consists of:

-

-=over 4

-

-=item - A MAC of the FIPS module file.

-

-=item - A test status indicator.

-

-This indicates if the Known Answer Self Tests (KAT's) have successfully run.

-

-=item - A MAC of the status indicator.

-

-=item - A control for conditional self tests errors.

-

-By default if a continuous test (e.g a key pair test) fails then the FIPS module

-will enter an error state, and no services or cryptographic algorithms will be

-able to be accessed after this point.

-The default value of '1' will cause the fips module error state to be entered.

-If the value is '0' then the module error state will not be entered.

-Regardless of whether the error state is entered or not, the current operation

-(e.g. key generation) will return an error. The user is responsible for retrying

-the operation if the module error state is not entered.

-

-=item - A control to indicate whether run-time security checks are done.

-

-This indicates if run-time checks related to enforcement of security parameters

-such as minimum security strength of keys and approved curve names are used.

-The default value of '1' will perform the checks.

-If the value is '0' the checks are not performed and FIPS compliance must

-be done by procedures documented in the relevant Security Policy.

-

-=back

-

-This file is described in L<fips_config(5)>.

-

-=head1 OPTIONS

-

-=over 4

-

-=item B<-help>

-

-Print a usage message.

-

-=item B<-module> I<filename>

-

-Filename of the FIPS module to perform an integrity check on.

-The path provided in the filename is used to load the module when it is

-activated, and this overrides the environment variable B<OPENSSL_MODULES>.

-

-=item B<-out> I<configfilename>

-

-Filename to output the configuration data to; the default is standard output.

-

-=item B<-in> I<configfilename>

-

-Input filename to load configuration data from.

-Must be used if the B<-verify> option is specified.

-

-=item B<-verify>

-

-Verify that the input configuration file contains the correct information.

-

-=item B<-provider_name> I<providername>

-

-Name of the provider inside the configuration file.

-The default value is C<fips>.

-

-=item B<-section_name> I<sectionname>

-

-Name of the section inside the configuration file.

-The default value is C<fips_sect>.

-

-=item B<-mac_name> I<name>

-

-Specifies the name of a supported MAC algorithm which will be used.

-The MAC mechanisms that are available will depend on the options

-used when building OpenSSL.

-To see the list of supported MAC's use the command

-C<openssl list -mac-algorithms>.  The default is B<HMAC>.

-

-=item B<-macopt> I<nm>:I<v>

-

-Passes options to the MAC algorithm.

-A comprehensive list of controls can be found in the EVP_MAC implementation

-documentation.

-Common control strings used for this command are:

-

-=over 4

-

-=item B<key>:I<string>

-

-Specifies the MAC key as an alphanumeric string (use if the key contains

-printable characters only).

-The string length must conform to any restrictions of the MAC algorithm.

-A key must be specified for every MAC algorithm.

-If no key is provided, the default that was specified when OpenSSL was

-configured is used.

-

-=item B<hexkey>:I<string>

-

-Specifies the MAC key in hexadecimal form (two hex digits per byte).

-The key length must conform to any restrictions of the MAC algorithm.

-A key must be specified for every MAC algorithm.

-If no key is provided, the default that was specified when OpenSSL was

-configured is used.

-

-=item B<digest>:I<string>

-

-Used by HMAC as an alphanumeric string (use if the key contains printable

-characters only).

-The string length must conform to any restrictions of the MAC algorithm.

-To see the list of supported digests, use the command

-C<openssl list -digest-commands>.

-The default digest is SHA-256.

-

-=back

-

-=item B<-noout>

-

-Disable logging of the self tests.

-

-=item B<-no_conditional_errors>

-

-Configure the module to not enter an error state if a conditional self test

-fails as described above.

-

-=item B<-no_security_checks>

-

-Configure the module to not perform run-time security checks as described above.

-

-=item B<-self_test_onload>

-

-Do not write the two fields related to the "test status indicator" and

-"MAC status indicator" to the output configuration file. Without these fields

-the self tests KATS will run each time the module is loaded. This option could be

-used for cross compiling, since the self tests need to run at least once on each

-target machine. Once the self tests have run on the target machine the user

-could possibly then add the 2 fields into the configuration using some other

-mechanism.

-

-=item B<-quiet>

-

-Do not output pass/fail messages. Implies B<-noout>.

-

-=item B<-corrupt_desc> I<selftest_description>,

-B<-corrupt_type> I<selftest_type>

-

-The corrupt options can be used to test failure of one or more self tests by

-name.

-Either option or both may be used to select the tests to corrupt.

-Refer to the entries for B<st-desc> and B<st-type> in L<OSSL_PROVIDER-FIPS(7)> for

-values that can be used.

-

-=item B<-config> I<parent_config>

-

-Test that a FIPS provider can be loaded from the specified configuration file.

-A previous call to this application needs to generate the extra configuration

-data that is included by the base C<parent_config> configuration file.

-See L<config(5)> for further information on how to set up a provider section.

-All other options are ignored if '-config' is used.

-

-=back

-

-=head1 EXAMPLES

-

-Calculate the mac of a FIPS module F<fips.so> and run a FIPS self test

-for the module, and save the F<fips.cnf> configuration file:

-

- openssl fipsinstall -module ./fips.so -out fips.cnf -provider_name fips

-

-Verify that the configuration file F<fips.cnf> contains the correct info:

-

- openssl fipsinstall -module ./fips.so -in fips.cnf  -provider_name fips -verify

-

-Corrupt any self tests which have the description C<SHA1>:

-

- openssl fipsinstall -module ./fips.so -out fips.cnf -provider_name fips \

-         -corrupt_desc 'SHA1'

-

-Validate that the fips module can be loaded from a base configuration file:

-

- export OPENSSL_CONF_INCLUDE=<path of configuration files>

- export OPENSSL_MODULES=<provider-path>

- openssl fipsinstall -config' 'default.cnf'

-

-

-=head1 SEE ALSO

-

-L<config(5)>,

-L<fips_config(5)>,

-L<OSSL_PROVIDER-FIPS(7)>,

-L<EVP_MAC(3)>

+This command is disabled. Please consult Red Hat Enterprise Linux documentation to learn how to correctly enable FIPS mode on Red Hat Enterprise Linux.

 =head1 COPYRIGHT

diff -up openssl-3.0.0/doc/man1/openssl.pod.xxx openssl-3.0.0/doc/man1/openssl.pod

--- openssl-3.0.0/doc/man1/openssl.pod.xxx	2021-11-22 13:18:51.081406990 +0100

+++ openssl-3.0.0/doc/man1/openssl.pod	2021-11-22 13:19:02.897508738 +0100

@@ -158,10 +158,6 @@ Engine (loadable module) information and

 Error Number to Error String Conversion.

-=item B<fipsinstall>

-

-FIPS configuration installation.

-

 =item B<gendsa>

 Generation of DSA Private Key from Parameters. Superseded by

diff -up openssl-3.0.0/doc/man5/config.pod.xxx openssl-3.0.0/doc/man5/config.pod

--- openssl-3.0.0/doc/man5/config.pod.xxx	2021-11-22 13:24:51.359509501 +0100

+++ openssl-3.0.0/doc/man5/config.pod	2021-11-22 13:26:02.360121820 +0100

@@ -573,7 +573,6 @@ configuration files using that syntax wi

 =head1 SEE ALSO

 L<openssl-x509(1)>, L<openssl-req(1)>, L<openssl-ca(1)>,

-L<openssl-fipsinstall(1)>,

 L<ASN1_generate_nconf(3)>,

 L<EVP_set_default_properties(3)>,

 L<CONF_modules_load(3)>,

diff -up openssl-3.0.0/doc/man5/fips_config.pod.xxx openssl-3.0.0/doc/man5/fips_config.pod

--- openssl-3.0.0/doc/man5/fips_config.pod.xxx	2021-11-22 13:21:13.812636065 +0100

+++ openssl-3.0.0/doc/man5/fips_config.pod	2021-11-22 13:24:12.278172847 +0100

@@ -6,106 +6,10 @@ fips_config - OpenSSL FIPS configuration

 =head1 DESCRIPTION

-A separate configuration file, using the OpenSSL L<config(5)> syntax,

-is used to hold information about the FIPS module. This includes a digest

-of the shared library file, and status about the self-testing.

-This data is used automatically by the module itself for two

-purposes:

-

-=over 4

-

-=item - Run the startup FIPS self-test known answer tests (KATS).

-

-This is normally done once, at installation time, but may also be set up to

-run each time the module is used.

-

-=item - Verify the module's checksum.

-

-This is done each time the module is used.

-

-=back

-

-This file is generated by the L<openssl-fipsinstall(1)> program, and

-used internally by the FIPS module during its initialization.

-

-The following options are supported. They should all appear in a section

-whose name is identified by the B<fips> option in the B<providers>

-section, as described in L<config(5)/Provider Configuration Module>.

-

-=over 4

-

-=item B<activate>

-

-If present, the module is activated. The value assigned to this name is not

-significant.

-

-=item B<install-version>

-

-A version number for the fips install process. Should be 1.

-

-=item B<conditional-errors>

-

-The FIPS module normally enters an internal error mode if any self test fails.

-Once this error mode is active, no services or cryptographic algorithms are

-accessible from this point on.

-Continuous tests are a subset of the self tests (e.g., a key pair test during key

-generation, or the CRNG output test).

-Setting this value to C<0> allows the error mode to not be triggered if any

-continuous test fails. The default value of C<1> will trigger the error mode.

-Regardless of the value, the operation (e.g., key generation) that called the

-continuous test will return an error code if its continuous test fails. The

-operation may then be retried if the error mode has not been triggered.

-

-=item B<security-checks>

-

-This indicates if run-time checks related to enforcement of security parameters

-such as minimum security strength of keys and approved curve names are used.

-A value of '1' will perform the checks, otherwise if the value is '0' the checks

-are not performed and FIPS compliance must be done by procedures documented in

-the relevant Security Policy.

-

-=item B<module-mac>

-

-The calculated MAC of the FIPS provider file.

-

-=item B<install-status>

-

-An indicator that the self-tests were successfully run.

-This should only be written after the module has

-successfully passed its self tests during installation.

-If this field is not present, then the self tests will run when the module

-loads.

-

-=item B<install-mac>

-

-A MAC of the value of the B<install-status> option, to prevent accidental

-changes to that value.

-It is written-to at the same time as B<install-status> is updated.

-

-=back

-

-For example:

-

- [fips_sect]

- activate = 1

- install-version = 1

- conditional-errors = 1

- security-checks = 1

- module-mac = 41:D0:FA:C2:5D:41:75:CD:7D:C3:90:55:6F:A4:DC

- install-mac = FE:10:13:5A:D3:B4:C7:82:1B:1E:17:4C:AC:84:0C

- install-status = INSTALL_SELF_TEST_KATS_RUN

-

-=head1 NOTES

-

-When using the FIPS provider, it is recommended that the

-B<config_diagnostics> option is enabled to prevent accidental use of

-non-FIPS validated algorithms via broken or mistaken configuration.

-See L<config(5)>.

-

-=head1 SEE ALSO

-

-L<config(5)>

-L<openssl-fipsinstall(1)>

+This command is disabled in Red Hat Enterprise Linux. The FIPS provider is

+automatically loaded when the system is boots in FIPS mode, or when the

+environment variable B<OPENSSL_FORCE_FIPS_MODE> is set. See the documentation

+for more information.

 =head1 COPYRIGHT

diff -up openssl-3.0.0/doc/man7/OSSL_PROVIDER-FIPS.pod.xxx openssl-3.0.0/doc/man7/OSSL_PROVIDER-FIPS.pod

--- openssl-3.0.0/doc/man7/OSSL_PROVIDER-FIPS.pod.xxx	2021-11-22 13:18:13.850086386 +0100

+++ openssl-3.0.0/doc/man7/OSSL_PROVIDER-FIPS.pod	2021-11-22 13:18:24.607179038 +0100

@@ -388,7 +388,6 @@ A simple self test callback is shown bel

 =head1 SEE ALSO

-L<openssl-fipsinstall(1)>,

 L<fips_config(5)>,

 L<OSSL_SELF_TEST_set_callback(3)>,

 L<OSSL_SELF_TEST_new(3)>,