From 019eccdb20e824aabb12da3699664ba2625ef4b4 Mon Sep 17 00:00:00 2001

From: Cole Robinson <crobinso@redhat.com>

Date: Fri, 30 Aug 2013 12:41:34 -0400

Subject: [PATCH 6/8] domain_conf: Add disk bus=sd, wire it up for qemu

This corresponds to '-sd' and '-drive if=sd' on the qemu command line.

Needed for many ARM boards which don't provide any other way to

pass in storage.

---

 docs/formatdomain.html.in     |  3 ++-

 docs/schemas/domaincommon.rng |  1 +

 src/conf/domain_conf.c        |  4 +++-

 src/conf/domain_conf.h        |  1 +

 src/qemu/qemu_command.c       | 20 +++++++++++++++-----

 5 files changed, 22 insertions(+), 7 deletions(-)

diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in

index cce179d..af9b4ae 100644

--- a/docs/formatdomain.html.in

+++ b/docs/formatdomain.html.in

@@ -1785,7 +1785,8 @@

         as a device ordering hint.  The optional bus

         attribute specifies the type of disk device to emulate;

         possible values are driver specific, with typical values being

-        "ide", "scsi", "virtio", "xen", "usb" or "sata". If omitted, the bus

+        "ide", "scsi", "virtio", "xen", "usb", "sata", or

+        "sd" "sd" since 1.1.2. If omitted, the bus

         type is inferred from the style of the device name (e.g. a device named

         'sda' will typically be exported using a SCSI bus). The optional

         attribute tray indicates the tray status of the

diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng

index 68c3e4d..79ea746 100644

--- a/docs/schemas/domaincommon.rng

+++ b/docs/schemas/domaincommon.rng

@@ -1295,6 +1295,7 @@

             <value>usb</value>

             <value>uml</value>

             <value>sata</value>

+            <value>sd</value>

           </choice>

         </attribute>

       </optional>

diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c

index fafbb89..2c62a2d 100644

--- a/src/conf/domain_conf.c

+++ b/src/conf/domain_conf.c

@@ -239,7 +239,8 @@ VIR_ENUM_IMPL(virDomainDiskBus, VIR_DOMAIN_DISK_BUS_LAST,

               "xen",

               "usb",

               "uml",

-              "sata")

+              "sata",

+              "sd")

 VIR_ENUM_IMPL(virDomainDiskCache, VIR_DOMAIN_DISK_CACHE_LAST,

               "default",

@@ -17308,6 +17309,7 @@ virDiskNameToBusDeviceIndex(const virDomainDiskDefPtr disk,

         case VIR_DOMAIN_DISK_BUS_USB:

         case VIR_DOMAIN_DISK_BUS_VIRTIO:

         case VIR_DOMAIN_DISK_BUS_XEN:

+        case VIR_DOMAIN_DISK_BUS_SD:

         default:

             *busIdx = 0;

             *devIdx = idx;

diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h

index 56739b7..380e2bb 100644

--- a/src/conf/domain_conf.h

+++ b/src/conf/domain_conf.h

@@ -509,6 +509,7 @@ enum virDomainDiskBus {

     VIR_DOMAIN_DISK_BUS_USB,

     VIR_DOMAIN_DISK_BUS_UML,

     VIR_DOMAIN_DISK_BUS_SATA,

+    VIR_DOMAIN_DISK_BUS_SD,

     VIR_DOMAIN_DISK_BUS_LAST

 };

diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c

index 87345c7..6733709 100644

--- a/src/qemu/qemu_command.c

+++ b/src/qemu/qemu_command.c

@@ -73,7 +73,8 @@ VIR_ENUM_IMPL(virDomainDiskQEMUBus, VIR_DOMAIN_DISK_BUS_LAST,

               "xen",

               "usb",

               "uml",

-              "sata")

+              "sata",

+              "sd")

 VIR_ENUM_DECL(qemuDiskCacheV1)

@@ -646,6 +647,9 @@ static int qemuAssignDeviceDiskAliasFixed(virDomainDiskDefPtr disk)

     case VIR_DOMAIN_DISK_BUS_XEN:

         ret = virAsprintf(&dev_name, "xenblk%d", devid);

         break;

+    case VIR_DOMAIN_DISK_BUS_SD:

+        ret = virAsprintf(&dev_name, "sd%d", devid);

+        break;

     default:

         virReportError(VIR_ERR_CONFIG_UNSUPPORTED,

                        _("Unsupported disk name mapping for bus '%s'"),

@@ -3786,7 +3790,9 @@ qemuBuildDriveStr(virConnectPtr conn ATTRIBUTE_UNUSED,

         break;

     case VIR_DOMAIN_DISK_BUS_XEN:

-        /* Xen has no address type currently, so assign based on index */

+    case VIR_DOMAIN_DISK_BUS_SD:

+        /* Xen and SD have no address type currently, so assign

+         * based on index */

         break;

     }

@@ -8190,12 +8196,13 @@ qemuBuildCommandLine(virConnectPtr conn,

             virCommandAddArg(cmd, "-drive");

             /* Unfortunately it is not possible to use

-               -device for floppies, or Xen paravirt

+               -device for floppies, xen PV, or SD

                devices. Fortunately, those don't need

                static PCI addresses, so we don't really

                care that we can't use -device */

             if (virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE)) {

-                if (disk->bus != VIR_DOMAIN_DISK_BUS_XEN) {

+                if (disk->bus != VIR_DOMAIN_DISK_BUS_XEN &&

+                    disk->bus != VIR_DOMAIN_DISK_BUS_SD) {

                     withDeviceArg = true;

                 } else {

                     virQEMUCapsClear(qemuCaps, QEMU_CAPS_DEVICE);

@@ -9892,6 +9899,8 @@ qemuParseCommandLineDisk(virDomainXMLOptionPtr xmlopt,

                 def->bus = VIR_DOMAIN_DISK_BUS_VIRTIO;

             else if (STREQ(values[i], "xen"))

                 def->bus = VIR_DOMAIN_DISK_BUS_XEN;

+            else if (STREQ(values[i], "sd"))

+                def->bus = VIR_DOMAIN_DISK_BUS_SD;

         } else if (STREQ(keywords[i], "media")) {

             if (STREQ(values[i], "cdrom")) {

                 def->device = VIR_DOMAIN_DISK_DEVICE_CDROM;

@@ -10041,7 +10050,8 @@ qemuParseCommandLineDisk(virDomainXMLOptionPtr xmlopt,

     if (def->bus == VIR_DOMAIN_DISK_BUS_IDE) {

         ignore_value(VIR_STRDUP(def->dst, "hda"));

-    } else if (def->bus == VIR_DOMAIN_DISK_BUS_SCSI) {

+    } else if (def->bus == VIR_DOMAIN_DISK_BUS_SCSI ||

+               def->bus == VIR_DOMAIN_DISK_BUS_SD) {

         ignore_value(VIR_STRDUP(def->dst, "sda"));

     } else if (def->bus == VIR_DOMAIN_DISK_BUS_VIRTIO) {

         ignore_value(VIR_STRDUP(def->dst, "vda"));

-- 

1.8.3.1