From 4d25892179e4eff9fc4bd2a2ab45a91c5a372fc2 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Thu, 11 Dec 2014 15:46:17 +0100 Subject: [PATCH] dracut.usage.asc: Remove distro specific help from manpage Signed-off-by: Thomas Renninger --- dracut.usage.asc | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-) diff --git a/dracut.usage.asc b/dracut.usage.asc index 9e788c1..b4a8663 100644 --- a/dracut.usage.asc +++ b/dracut.usage.asc @@ -246,23 +246,6 @@ specified multiple times. If your root partition is on a network drive, you have to have the network dracut modules installed to create a network aware initramfs image. -On a Red Hat Enterprise Linux or Fedora system, this means, you have to install -the _dracut-network_ rpm package: - - ----- -# yum install dracut-network ----- - -The resulting initramfs image can be served by a boot manager residing on your -local hard drive or it can be served by a PXE/TFTP server. - -How to setup your PXE/TFTP server can be found in the -http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red -Hat Enterprise Linux 6 Storage Administration Guide] -or http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red -Hat Enterprise Linux 7 Storage Administration Guide]. - If you specify ip=dhcp on the kernel command line, then dracut asks a dhcp server about the ip adress for the machine. The dhcp server can also serve an additional root-path, which will set the root device for dracut. With this @@ -302,7 +285,7 @@ This will reduce the size of the initramfs image significantly. If the boot process does not succeed, you have several options to debug the situation. Some of the basic operations are covered here. For more information you should also visit: -http://fedoraproject.org/wiki/How_to_debug_Dracut_problems +https://www.kernel.org/pub/linux/utils/boot/dracut/dracut.html [[identifying-your-problem-area]]