From 7a90c8b3434a27a347f6a963d0e673e04feb485a Mon Sep 17 00:00:00 2001 From: Harald Hoyer Date: Mon, 4 Jul 2016 11:31:49 +0200 Subject: [PATCH] network: support multiple vlan, team, bridge and bond --- modules.d/40network/ifup.sh | 386 +++++++++++++++++------------------- modules.d/40network/net-genrules.sh | 27 ++- modules.d/40network/net-lib.sh | 9 +- modules.d/40network/parse-bridge.sh | 30 +-- modules.d/40network/parse-team.sh | 47 ++--- modules.d/40network/parse-vlan.sh | 27 +-- modules.d/45ifcfg/write-ifcfg.sh | 26 +-- 7 files changed, 254 insertions(+), 298 deletions(-) diff --git a/modules.d/40network/ifup.sh b/modules.d/40network/ifup.sh index cedf9a7..d7503c7 100755 --- a/modules.d/40network/ifup.sh +++ b/modules.d/40network/ifup.sh @@ -17,79 +17,12 @@ type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh # $netif reads easier than $1 netif=$1 -use_bridge='false' -use_vlan='false' -# enslave this interface to bond? -for i in /tmp/bond.*.info; do - [ -e "$i" ] || continue - unset bondslaves - unset bondname - . "$i" - for slave in $bondslaves ; do - if [ "$netif" = "$slave" ] ; then - netif=$bondname - break 2 - fi - done -done - -for i in /tmp/team.*.info; do - [ -e "$i" ] || continue - unset teamslaves - unset teammaster - . "$i" - for slave in $teamslaves ; do - if [ "$netif" = "$slave" ] ; then - netif=$teammaster - fi - done -done - -if [ -e /tmp/vlan.info ]; then - . /tmp/vlan.info - if [ "$netif" = "$phydevice" ]; then - if [ "$netif" = "$bondname" ] && [ -n "$DO_BOND_SETUP" ] ; then - : # We need to really setup bond (recursive call) - elif [ "$netif" = "$teammaster" ] && [ -n "$DO_TEAM_SETUP" ] ; then - : # We need to really setup team (recursive call) - else - netif="$vlanname" - use_vlan='true' - fi - fi -fi - -# bridge this interface? -if [ -e /tmp/bridge.info ]; then - . /tmp/bridge.info - for ethname in $bridgeslaves ; do - if [ "$netif" = "$ethname" ]; then - if [ "$netif" = "$bondname" ] && [ -n "$DO_BOND_SETUP" ] ; then - : # We need to really setup bond (recursive call) - elif [ "$netif" = "$teammaster" ] && [ -n "$DO_TEAM_SETUP" ] ; then - : # We need to really setup team (recursive call) - elif [ "$netif" = "$vlanname" ] && [ -n "$DO_VLAN_SETUP" ]; then - : # We need to really setup vlan (recursive call) - else - netif="$bridgename" - use_bridge='true' - fi - fi - done -fi - -# disable manual ifup while netroot is set for simplifying our logic -# in netroot case we prefer netroot to bringup $netif automaticlly -[ -n "$2" -a "$2" = "-m" ] && [ -z "$netroot" ] && manualup="$2" - -if [ -n "$manualup" ]; then - >/tmp/net.$netif.manualup - rm -f /tmp/net.${netif}.did-setup -else - [ -e /tmp/net.${netif}.did-setup ] && exit 0 - [ -e /sys/class/net/$netif/address ] && \ - [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && exit 0 +# loopback is always handled the same way +if [ "$netif" = "lo" ] ; then + ip link set lo up + ip addr add 127.0.0.1/8 dev lo + exit 0 fi # Run dhclient @@ -199,158 +132,213 @@ do_static() { return 0 } -# loopback is always handled the same way -if [ "$netif" = "lo" ] ; then - ip link set lo up - ip addr add 127.0.0.1/8 dev lo +get_vid() { + case "$1" in + vlan*) + echo ${1#vlan} + ;; + *.*) + echo ${1##*.} + ;; + esac +} + +# check, if we need VLAN's for this interface +if [ -z "$DO_VLAN_PHY" ] && [ -e /tmp/vlan.${netif}.phy ]; then + unset DO_VLAN + NO_AUTO_DHCP=yes DO_VLAN_PHY=yes ifup "$netif" + modprobe -b -q 8021q + + for i in /tmp/vlan.*.${netif}; do + [ -e "$i" ] || continue + read vlanname < "$i" + if [ -n "$vlanname" ]; then + linkup "$netif" + ip link add dev "$vlanname" link "$netif" type vlan id "$(get_vid $vlanname)" + ifup "$vlanname" + fi + done exit 0 fi -# start bond if needed -if [ -e /tmp/bond.${netif}.info ]; then - . /tmp/bond.${netif}.info +# Check, if interface is VLAN interface +if ! [ -e /tmp/vlan.${netif}.phy ]; then + for i in /tmp/vlan.${netif}.*; do + [ -e "$i" ] || continue + export DO_VLAN=yes + break + done +fi - if [ "$netif" = "$bondname" ] && [ ! -e /tmp/net.$bondname.setup ] ; then # We are master bond device - modprobe bonding - udevadm settle - if ! [ -e /sys/class/net/${netif} ]; then - echo "+$netif" > /sys/class/net/bonding_masters - fi - ip link set $netif down - - # Stolen from ifup-eth - # add the bits to setup driver parameters here - for arg in $bondoptions ; do - key=${arg%%=*}; - value=${arg##*=}; - # %{value:0:1} is replaced with non-bash specific construct - if [ "${key}" = "arp_ip_target" -a "${#value}" != "0" -a "+${value%%+*}" != "+" ]; then - OLDIFS=$IFS; - IFS=','; - for arp_ip in $value; do - echo +$arp_ip > /sys/class/net/${netif}/bonding/$key - done - IFS=$OLDIFS; - else - echo $value > /sys/class/net/${netif}/bonding/$key +# bridge this interface? +if [ -z "$NO_BRIDGE_MASTER" ]; then + for i in /tmp/bridge.*.info; do + [ -e "$i" ] || continue + unset bridgeslaves + unset bridgename + . "$i" + for ethname in $bridgeslaves ; do + [ "$netif" != "$ethname" ] && continue + + NO_BRIDGE_MASTER=yes NO_AUTO_DHCP=yes ifup $ethname + linkup $ethname + if [ ! -e /tmp/bridge.$bridgename.up ]; then + brctl addbr $bridgename + brctl setfd $bridgename 0 + > /tmp/bridge.$bridgename.up fi + brctl addif $bridgename $ethname + ifup $bridgename + exit 0 done + done +fi - linkup $netif - +# enslave this interface to bond? +if [ -z "$NO_BOND_MASTER" ]; then + for i in /tmp/bond.*.info; do + [ -e "$i" ] || continue + unset bondslaves + unset bondname + . "$i" for slave in $bondslaves ; do - ip link set $slave down - cat /sys/class/net/$slave/address > /tmp/net.${netif}.${slave}.hwaddr - echo "+$slave" > /sys/class/net/$bondname/bonding/slaves - linkup $slave - done + [ "$netif" != "$slave" ] && continue - # add the bits to setup the needed post enslavement parameters - for arg in $BONDING_OPTS ; do - key=${arg%%=*}; - value=${arg##*=}; - if [ "${key}" = "primary" ]; then - echo $value > /sys/class/net/${netif}/bonding/$key - fi + # already setup + [ -e /tmp/bond.$bondname.up ] && exit 0 + + # wait for all slaves to show up + for slave in $bondslaves ; do + # try to create the slave (maybe vlan or bridge) + NO_BOND_MASTER=yes NO_AUTO_DHCP=yes ifup $slave + + if ! ip link show dev $slave >/dev/null 2>&1; then + # wait for the last slave to show up + exit 0 + fi + done + + modprobe -q -b bonding + echo "+$bondname" > /sys/class/net/bonding_masters 2>/dev/null + ip link set $bondname down + + # Stolen from ifup-eth + # add the bits to setup driver parameters here + for arg in $bondoptions ; do + key=${arg%%=*}; + value=${arg##*=}; + # %{value:0:1} is replaced with non-bash specific construct + if [ "${key}" = "arp_ip_target" -a "${#value}" != "0" -a "+${value%%+*}" != "+" ]; then + OLDIFS=$IFS; + IFS=','; + for arp_ip in $value; do + echo +$arp_ip > /sys/class/net/${bondname}/bonding/$key + done + IFS=$OLDIFS; + else + echo $value > /sys/class/net/${bondname}/bonding/$key + fi + done + + linkup $bondname + + for slave in $bondslaves ; do + cat /sys/class/net/$slave/address > /tmp/net.${bondname}.${slave}.hwaddr + ip link set $slave down + echo "+$slave" > /sys/class/net/$bondname/bonding/slaves + linkup $slave + done + + # add the bits to setup the needed post enslavement parameters + for arg in $bondoptions ; do + key=${arg%%=*}; + value=${arg##*=}; + if [ "${key}" = "primary" ]; then + echo $value > /sys/class/net/${bondname}/bonding/$key + fi + done + + > /tmp/bond.$bondname.up + + NO_BOND_MASTER=yes ifup $bondname + exit $? done - > /tmp/net.$bondname.setup - fi + done fi -if [ -e /tmp/team.${netif}.info ]; then - . /tmp/team.${netif}.info - if [ "$netif" = "$teammaster" ] && [ ! -e /tmp/net.$teammaster.setup ] ; then - # We shall only bring up those _can_ come up - # in case of some slave is gone in active-backup mode - working_slaves="" +if [ -z "$NO_TEAM_MASTER" ]; then + for i in /tmp/team.*.info; do + [ -e "$i" ] || continue + unset teammaster + unset teamslaves + . "$i" for slave in $teamslaves ; do - teamdctl ${teammaster} port present ${slave} 2>/dev/null \ - && continue - ip link set dev $slave up 2>/dev/null - if wait_for_if_up $slave; then - working_slaves+="$slave " - fi - done - # Do not add slaves now - teamd -d -U -n -N -t $teammaster -f /etc/teamd/$teammaster.conf - for slave in $working_slaves; do - # team requires the slaves to be down before joining team - ip link set dev $slave down - ( - unset TEAM_PORT_CONFIG - _hwaddr=$(cat /sys/class/net/$slave/address) - _subchannels=$(iface_get_subchannels "$slave") - if [ -n "$_hwaddr" ] && [ -e "/etc/sysconfig/network-scripts/mac-${_hwaddr}.conf" ]; then - . "/etc/sysconfig/network-scripts/mac-${_hwaddr}.conf" - elif [ -n "$_subchannels" ] && [ -e "/etc/sysconfig/network-scripts/ccw-${_subchannels}.conf" ]; then - . "/etc/sysconfig/network-scripts/ccw-${_subchannels}.conf" - elif [ -e "/etc/sysconfig/network-scripts/ifcfg-${slave}" ]; then - . "/etc/sysconfig/network-scripts/ifcfg-${slave}" - fi + [ "$netif" != "$slave" ] && continue + + [ -e /tmp/team.$teammaster.up ] && exit 0 - if [ -n "${TEAM_PORT_CONFIG}" ]; then - /usr/bin/teamdctl ${teammaster} port config update ${slave} "${TEAM_PORT_CONFIG}" + # wait for all slaves to show up + for slave in $teamslaves ; do + # try to create the slave (maybe vlan or bridge) + NO_BOND_MASTER=yes NO_AUTO_DHCP=yes ifup $slave + + if ! ip link show dev $slave >/dev/null 2>&1; then + # wait for the last slave to show up + exit 0 fi - ) - teamdctl $teammaster port add $slave - done - ip link set dev $teammaster up - > /tmp/net.$teammaster.setup - fi -fi + done + + if [ ! -e /tmp/team.$teammaster.up ] ; then + # We shall only bring up those _can_ come up + # in case of some slave is gone in active-backup mode + working_slaves="" + for slave in $teamslaves ; do + ip link set $slave up 2>/dev/null + if wait_for_if_up $slave; then + working_slaves="$working_slaves$slave " + fi + done + # Do not add slaves now + teamd -d -U -n -N -t $teammaster -f /etc/teamd/$teammaster.conf + for slave in $working_slaves; do + # team requires the slaves to be down before joining team + ip link set $slave down + teamdctl $teammaster port add $slave + done -# XXX need error handling like dhclient-script + ip link set $teammaster up -if [ -e /tmp/bridge.info ]; then - . /tmp/bridge.info -# start bridge if necessary - if [ "$netif" = "$bridgename" ] && [ ! -e /tmp/net.$bridgename.setup ]; then - brctl addbr $bridgename - brctl setfd $bridgename 0 - for ethname in $bridgeslaves ; do - if [ "$ethname" = "$bondname" ] ; then - DO_BOND_SETUP=yes ifup $bondname -m - elif [ "$ethname" = "$teammaster" ] ; then - DO_TEAM_SETUP=yes ifup $teammaster -m - elif [ "$ethname" = "$vlanname" ]; then - DO_VLAN_SETUP=yes ifup $vlanname -m - else - linkup $ethname + > /tmp/team.$teammaster.up + NO_TEAM_MASTER=yes ifup $teammaster + exit $? fi - brctl addif $bridgename $ethname done - > /tmp/net.$bridgename.setup - fi + done fi -get_vid() { - case "$1" in - vlan*) - echo ${1#vlan} - ;; - *.*) - echo ${1##*.} - ;; - esac -} +# all synthetic interfaces done.. now check if the interface is available +if ! ip link show dev $netif >/dev/null 2>&1; then + exit 1 +fi -if [ "$netif" = "$vlanname" ] && [ ! -e /tmp/net.$vlanname.up ]; then - modprobe 8021q - if [ "$phydevice" = "$bondname" ] ; then - DO_BOND_SETUP=yes ifup $phydevice -m - elif [ "$phydevice" = "$teammaster" ] ; then - DO_TEAM_SETUP=yes ifup $phydevice -m - else - linkup "$phydevice" - fi - ip link add dev "$vlanname" link "$phydevice" type vlan id "$(get_vid $vlanname)" - ip link set "$vlanname" up +# disable manual ifup while netroot is set for simplifying our logic +# in netroot case we prefer netroot to bringup $netif automaticlly +[ -n "$2" -a "$2" = "-m" ] && [ -z "$netroot" ] && manualup="$2" + +if [ -n "$manualup" ]; then + >/tmp/net.$netif.manualup + rm -f /tmp/net.${netif}.did-setup +else + [ -e /tmp/net.${netif}.did-setup ] && exit 0 + [ -z "$DO_VLAN" ] && \ + [ -e /sys/class/net/$netif/address ] && \ + [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && exit 0 fi # No ip lines default to dhcp ip=$(getarg ip) -if [ -z "$ip" ]; then +if [ -z "$NO_AUTO_DHCP" ] && [ -z "$ip" ]; then if [ "$netroot" = "dhcp6" ]; then do_dhcp -6 else @@ -415,7 +403,7 @@ for p in $(getargs ip=); do if [ $ret -eq 0 ]; then > /tmp/net.${netif}.up - if [ -e /sys/class/net/${netif}/address ]; then + if [ -z "$DO_VLAN" ] && [ -e /sys/class/net/${netif}/address ]; then > /tmp/net.$(cat /sys/class/net/${netif}/address).up fi @@ -444,7 +432,7 @@ if [ -n "$DO_BOND_SETUP" -o -n "$DO_TEAM_SETUP" -o -n "$DO_VLAN_SETUP" ]; then fi # no ip option directed at our interface? -if [ ! -e /tmp/net.${netif}.up ]; then +if [ -z "$NO_AUTO_DHCP" ] && [ ! -e /tmp/net.${netif}.up ]; then if [ -e /tmp/net.bootdev ]; then BOOTDEV=$(cat /tmp/net.bootdev) if [ "$netif" = "$BOOTDEV" ] || [ "$BOOTDEV" = "$(cat /sys/class/net/${netif}/address)" ]; then diff --git a/modules.d/40network/net-genrules.sh b/modules.d/40network/net-genrules.sh index 526dd5c..08072fb 100755 --- a/modules.d/40network/net-genrules.sh +++ b/modules.d/40network/net-genrules.sh @@ -1,6 +1,4 @@ #!/bin/sh -# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*- -# ex: ts=8 sw=4 sts=4 et filetype=sh getargbool 0 rd.neednet && NEEDNET=1 @@ -14,11 +12,14 @@ command -v fix_bootif >/dev/null || . /lib/net-lib.sh # Write udev rules { # bridge: attempt only the defined interface - if [ -e /tmp/bridge.info ]; then - . /tmp/bridge.info + for i in /tmp/bridge.*.info; do + [ -e "$i" ] || continue + unset bridgeslaves + unset bridgename + . "$i" RAW_IFACES="$RAW_IFACES $bridgeslaves" MASTER_IFACES="$MASTER_IFACES $bridgename" - fi + done # bond: attempt only the defined interface (override bridge defines) for i in /tmp/bond.*.info; do @@ -40,11 +41,19 @@ command -v fix_bootif >/dev/null || . /lib/net-lib.sh MASTER_IFACES="$MASTER_IFACES ${teammaster}" done - if [ -e /tmp/vlan.info ]; then - . /tmp/vlan.info + for j in /tmp/vlan.*.phy; do + [ -e "$j" ] || continue + unset phydevice + read phydevice < "$j" RAW_IFACES="$RAW_IFACES $phydevice" - MASTER_IFACES="$MASTER_IFACES ${vlanname}" - fi + for i in /tmp/vlan.*.${phydevice}; do + [ -e "$i" ] || continue + unset vlanname + read vlanname < "$i" + MASTER_IFACES="$MASTER_IFACES ${vlanname}" + done + done + MASTER_IFACES="$(trim "$MASTER_IFACES")" RAW_IFACES="$(trim "$RAW_IFACES")" diff --git a/modules.d/40network/net-lib.sh b/modules.d/40network/net-lib.sh index 7120193..de334d9 100755 --- a/modules.d/40network/net-lib.sh +++ b/modules.d/40network/net-lib.sh @@ -102,7 +102,8 @@ ifdown() { ip addr flush dev $netif echo "#empty" > /etc/resolv.conf rm -f -- /tmp/net.$netif.did-setup - [ -e /sys/class/net/$netif/address ] && \ + [ -z "$DO_VLAN" ] && \ + [ -e /sys/class/net/$netif/address ] && \ rm -f -- /tmp/net.$(cat /sys/class/net/$netif/address).did-setup # TODO: send "offline" uevent? } @@ -111,7 +112,8 @@ setup_net() { local netif="$1" f="" gw_ip="" netroot_ip="" iface="" IFACES="" local _p [ -e /tmp/net.$netif.did-setup ] && return - [ -e /sys/class/net/$netif/address ] && \ + [ -z "$DO_VLAN" ] && \ + [ -e /sys/class/net/$netif/address ] && \ [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && return [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces [ -z "$IFACES" ] && IFACES="$netif" @@ -168,7 +170,8 @@ setup_net() { unset layer2 > /tmp/net.$netif.did-setup - [ -e /sys/class/net/$netif/address ] && \ + [ -z "$DO_VLAN" ] && \ + [ -e /sys/class/net/$netif/address ] && \ > /tmp/net.$(cat /sys/class/net/$netif/address).did-setup } diff --git a/modules.d/40network/parse-bridge.sh b/modules.d/40network/parse-bridge.sh index a910109..5c3af29 100755 --- a/modules.d/40network/parse-bridge.sh +++ b/modules.d/40network/parse-bridge.sh @@ -1,6 +1,4 @@ #!/bin/sh -# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*- -# ex: ts=8 sw=4 sts=4 et filetype=sh # # Format: # bridge=: @@ -9,14 +7,6 @@ # bridge without parameters assumes bridge=br0:eth0 # -# return if bridge already parsed -[ -n "$bridgename" ] && return - -# Check if bridge parameter is valid -if getarg bridge= >/dev/null ; then - command -v brctl >/dev/null 2>&1 || die "No 'brctl' installed" -fi - parsebridge() { local v=${1}: set -- @@ -24,8 +14,6 @@ parsebridge() { set -- "$@" "${v%%:*}" v=${v#*:} done - - unset bridgename bridgeslaves case $# in 0) bridgename=br0; bridgeslaves=$iface ;; 1) die "bridge= requires two parameters" ;; @@ -34,14 +22,13 @@ parsebridge() { esac } -unset bridgename bridgeslaves - -iface=eth0 - # Parse bridge for bridgename and bridgeslaves -if bridge="$(getarg bridge)"; then +for bridge in $(getargs bridge=); do + unset bridgename + unset bridgeslaves + iface=eth0 # Read bridge= parameters if they exist - if [ -n "$bridge" ]; then + if [ "$bridge" != "bridge" ]; then parsebridge $bridge fi # Simple default bridge @@ -49,7 +36,6 @@ if bridge="$(getarg bridge)"; then bridgename=br0 bridgeslaves=$iface fi - echo "bridgename=$bridgename" > /tmp/bridge.info - echo "bridgeslaves=\"$bridgeslaves\"" >> /tmp/bridge.info - return -fi + echo "bridgename=$bridgename" > /tmp/bridge.${bridgename}.info + echo "bridgeslaves=\"$bridgeslaves\"" >> /tmp/bridge.${bridgename}.info +done diff --git a/modules.d/40network/parse-team.sh b/modules.d/40network/parse-team.sh index a836d68..136c370 100755 --- a/modules.d/40network/parse-team.sh +++ b/modules.d/40network/parse-team.sh @@ -6,14 +6,6 @@ # teamslaves is a comma-separated list of physical (ethernet) interfaces # -# return if team already parsed -[ -n "$teammaster" ] && return - -# Check if team parameter is valid -if getarg team= >/dev/null ; then - : -fi - parseteam() { local v=${1}: set -- @@ -22,33 +14,22 @@ parseteam() { v=${v#*:} done - unset teammaster teamslaves case $# in - 2) teammaster=$1; teamslaves=$(str_replace "$2" "," " ") ;; - *) warn "team= requires two parameters"; return 1;; + 2) teammaster=$1; teamslaves=$(str_replace "$2" "," " ") ;; + *) die "team= requires two parameters" ;; esac - return 0 } -unset teammaster teamslaves - -if getarg team>/dev/null; then - # Read team= parameters if they exist - for team in $(getargs team); do - [ "$team" = "team" ] && continue - - unset teammaster - unset teamslaves - parseteam "$team" || continue - - echo "teammaster=$teammaster" > /tmp/team.${teammaster}.info - echo "teamslaves=\"$teamslaves\"" >> /tmp/team.${teammaster}.info - - if ! [ -e /etc/teamd/${teammaster}.conf ]; then - warn "Team master $teammaster specified, but no /etc/teamd/$teammaster.conf present. Using activebackup." - mkdir -p /etc/teamd - printf -- "%s" '{"runner": {"name": "activebackup"}, "link_watch": {"name": "ethtool"}}' > "/etc/teamd/${teammaster}.conf" - fi - done -fi +for team in $(getargs team=); do + unset teammaster teamslaves + parseteam "$(getarg team=)" + + echo "teammaster=$teammaster" > /tmp/team.${teammaster}.info + echo "teamslaves=\"$teamslaves\"" >> /tmp/team.${teammaster}.info + if ! [ -e /etc/teamd/${teammaster}.conf ]; then + warn "Team master $teammaster specified, but no /etc/teamd/$teammaster.conf present. Using activebackup." + mkdir -p /etc/teamd + printf -- "%s" '{"runner": {"name": "activebackup"}, "link_watch": {"name": "ethtool"}}' > "/etc/teamd/${teammaster}.conf" + fi +done diff --git a/modules.d/40network/parse-vlan.sh b/modules.d/40network/parse-vlan.sh index 3ba2289..5a747f0 100755 --- a/modules.d/40network/parse-vlan.sh +++ b/modules.d/40network/parse-vlan.sh @@ -4,14 +4,6 @@ # vlan=: # -# return if vlan already parsed -[ -n "$vlanname" ] && return - -# Check if vlan parameter is valid -if getarg vlan= >/dev/null ; then - : -fi - parsevlan() { local v=${1}: set -- @@ -27,16 +19,11 @@ parsevlan() { esac } -unset vlanname phydevice - -if getarg vlan >/dev/null; then - # Read vlan= parameters if they exist - vlan="$(getarg vlan=)" - if [ ! "$vlan" = "vlan" ]; then - parsevlan "$(getarg vlan=)" - fi +for vlan in $(getargs vlan=); do + unset vlanname + unset phydevice + parsevlan "$vlan" - echo "vlanname=\"$vlanname\"" > /tmp/vlan.info - echo "phydevice=\"$phydevice\"" >> /tmp/vlan.info - return -fi + echo "$phydevice" > /tmp/vlan.${phydevice}.phy + echo "$vlanname" > /tmp/vlan.${vlanname}.${phydevice} +done diff --git a/modules.d/45ifcfg/write-ifcfg.sh b/modules.d/45ifcfg/write-ifcfg.sh index cab7477..a077da1 100755 --- a/modules.d/45ifcfg/write-ifcfg.sh +++ b/modules.d/45ifcfg/write-ifcfg.sh @@ -7,14 +7,6 @@ type is_persistent_ethernet_name >/dev/null 2>&1 || . /lib/net-lib.sh udevadm settle --timeout=30 -if [ -e /tmp/bridge.info ]; then - . /tmp/bridge.info -fi - -if [ -e /tmp/vlan.info ]; then - . /tmp/vlan.info -fi - mkdir -m 0755 -p /tmp/ifcfg/ mkdir -m 0755 -p /tmp/ifcfg-leases/ @@ -24,7 +16,7 @@ get_config_line_by_subchannel() local line CHANNELS="$1" - while read line; do + while read line || [ -n "$line" ]; do if strstr "$line" "$CHANNELS"; then echo $line return 0 @@ -132,6 +124,8 @@ for netup in /tmp/net.*.did-setup ; do unset bondslaves unset bondname unset bondoptions + unset bridgename + unset bridgeslaves unset uuid unset ip unset gw @@ -141,8 +135,10 @@ for netup in /tmp/net.*.did-setup ; do unset slave unset ethname unset vlan + unset phydevice [ -e /tmp/bond.${netif}.info ] && . /tmp/bond.${netif}.info + [ -e /tmp/bridge.${netif}.info ] && . /tmp/bridge.${netif}.info [ -e /tmp/team.${netif}.info ] && . /tmp/team.${netif}.info [ -e /tmp/net.${netif}.override ] && . /tmp/net.${netif}.override @@ -152,11 +148,17 @@ for netup in /tmp/net.*.did-setup ; do elif [ "$netif" = "$teammaster" ]; then team=yes elif [ "$netif" = "$bondname" ]; then - # $netif can't be bridge and bond at the same time + # $netif can't be bridge and bond at the same time bond=yes fi - if [ "$netif" = "$vlanname" ]; then - vlan=yes + + if ! [ -e /tmp/vlan.${netif}.phy ]; then + for i in /tmp/vlan.${netif}.*; do + [ ! -e "$i" ] && continue + phydevice=${i##/tmp/vlan.${netif}.} + vlan=yes + break + done fi # skip team interfaces for now, the host config must be in sync