From b94732d29a51799cd7685dddc838d268667af6b3 Mon Sep 17 00:00:00 2001 From: Harald Hoyer Date: Dec 19 2014 14:01:39 +0000 Subject: dracut-040-78.git20141219 - git snapshot --- diff --git a/0030-dmsquash-live-setup-the-images-in-run-initramfs.patch b/0030-dmsquash-live-setup-the-images-in-run-initramfs.patch new file mode 100644 index 0000000..8cf16e5 --- /dev/null +++ b/0030-dmsquash-live-setup-the-images-in-run-initramfs.patch @@ -0,0 +1,51 @@ +From 1f8abe81a9fca0f44c63bf3bd30a7f7fbec28642 Mon Sep 17 00:00:00 2001 +From: Harald Hoyer +Date: Tue, 16 Dec 2014 12:53:18 +0100 +Subject: [PATCH] dmsquash-live: setup the images in /run/initramfs + +We want to cleanup / after switch_root. Placing the loop files in / +works, but it is more sane to put them in /run/initramfs +--- + modules.d/90dmsquash-live/dmsquash-live-root.sh | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +diff --git a/modules.d/90dmsquash-live/dmsquash-live-root.sh b/modules.d/90dmsquash-live/dmsquash-live-root.sh +index d921f0c..6e504a6 100755 +--- a/modules.d/90dmsquash-live/dmsquash-live-root.sh ++++ b/modules.d/90dmsquash-live/dmsquash-live-root.sh +@@ -162,9 +162,9 @@ fi + + if [ -n "$OSMINSQFS" ]; then + # decompress the delta data +- dd if=$OSMINSQFS of=/osmin.img 2> /dev/null ++ dd if=$OSMINSQFS of=/run/initramfs/osmin.img 2> /dev/null + OSMIN_SQUASHED_LOOPDEV=$( losetup -f ) +- losetup -r $OSMIN_SQUASHED_LOOPDEV /osmin.img ++ losetup -r $OSMIN_SQUASHED_LOOPDEV /run/initramfs/osmin.img + mkdir -m 0755 -p /run/initramfs/squashfs.osmin + mount -n -t squashfs -o ro $OSMIN_SQUASHED_LOOPDEV /run/initramfs/squashfs.osmin + OSMIN_LOOPDEV=$( losetup -f ) +@@ -185,8 +185,8 @@ if [ -n "$FSIMG" ] ; then + if [ -n "$writable_fsimg" ] ; then + # mount the provided fileysstem read/write + echo "Unpacking live filesystem (may take some time)" +- unpack_archive $FSIMG /tmp/fsimg/ +- losetup $BASE_LOOPDEV /tmp/fsimg/rootfs.img ++ unpack_archive $FSIMG /run/initramfs/fsimg/ ++ losetup $BASE_LOOPDEV /run/initramfs/fsimg/rootfs.img + echo "0 $( blockdev --getsize $BASE_LOOPDEV ) linear $BASE_LOOPDEV 0" | dmsetup create live-rw + else + # mount the filesystem read-only and add a dm snapshot for writes +@@ -204,10 +204,10 @@ if [ -e "$SQUASHED" ] ; then + if [ -n "$live_ram" ] ; then + echo "Copying live image to RAM..." + echo "(this may take a few minutes)" +- dd if=$SQUASHED of=/squashed.img bs=512 2> /dev/null ++ dd if=$SQUASHED of=/run/initramfs/squashed.img bs=512 2> /dev/null + umount -n /run/initramfs/live + echo "Done copying live image to RAM." +- SQUASHED="/squashed.img" ++ SQUASHED="/run/initramfs/squashed.img" + fi + + SQUASHED_LOOPDEV=$( losetup -f ) diff --git a/0031-mkinitrd-suse-Update-to-sles12-SUSE-state.patch b/0031-mkinitrd-suse-Update-to-sles12-SUSE-state.patch new file mode 100644 index 0000000..74754c9 --- /dev/null +++ b/0031-mkinitrd-suse-Update-to-sles12-SUSE-state.patch @@ -0,0 +1,195 @@ +From 552c37e1563eccbc25968064b087232b9eaea987 Mon Sep 17 00:00:00 2001 +From: Thomas Renninger +Date: Thu, 11 Dec 2014 15:45:52 +0100 +Subject: [PATCH] mkinitrd-suse: Update to sles12 SUSE state + +Incorporates these patches: +- 0013 mkinitrd-suse: do not update bootloader if no kernel was found + bnc#858268 +- 0018 mkinitrd-suse: Fix whitespaces when adding drivers +- 0032 mkinitrd-suse.sh: Use '--hostonly' and '--hostonly-cmdline' correctly + bnc#874000,bnc#874905,bnc#874363 +- 0039 Remove --force parameter from mkinitrd +- 0041 mkinitd-suse: remove --hostonly and --hostonly-cmdline + Should be set via configuration files, not in the script itself. +- 0051 mkinitrd-suse: add 'update bootloader' message +- 0120 mkinitrd-suse.sh: Bail out with exit 1 if initrd cannot be generated + bnc#886630 + +Signed-off-by: Thomas Renninger +--- + mkinitrd-suse.8.asc | 7 +++--- + mkinitrd-suse.sh | 66 +++++++++++++++++++++++++---------------------------- + 2 files changed, 34 insertions(+), 39 deletions(-) + +diff --git a/mkinitrd-suse.8.asc b/mkinitrd-suse.8.asc +index 9eb8fc9..cdb8e3a 100644 +--- a/mkinitrd-suse.8.asc ++++ b/mkinitrd-suse.8.asc +@@ -76,7 +76,9 @@ OPTIONS + + **-A**:: + Create a so called "monster initrd" which includes all available +- features and modules. ++ features and modules. This calls dracut with --no-hostonly and ++ --no-hostonly-cmdline parameters internally, instead of the default ++ --hostonly and --hostonly-cmdline. + + **-v, --verbose**:: + increase verbosity level +@@ -85,9 +87,6 @@ OPTIONS + Disable logging to _/var/log/YaST2/mkinitrd.log_. This is useful for + testing if you don’t want to clutter the system log. + +-**--force**:: +- overwrite existing initramfs file. +- + **--help**:: + print a help message and exit. + +diff --git a/mkinitrd-suse.sh b/mkinitrd-suse.sh +index 23dc262..af42cbe 100755 +--- a/mkinitrd-suse.sh ++++ b/mkinitrd-suse.sh +@@ -20,8 +20,6 @@ + + boot_dir="/boot" + quiet=0 +-host_only=1 +-force=0 + logfile=/var/log/YaST2/mkinitrd.log + dracut_cmd=dracut + +@@ -68,10 +66,7 @@ usage () { + $cmd " -j device Journal device" + $cmd " -D interface Run dhcp on the specified interface." + $cmd " -I interface Configure the specified interface statically." +- $cmd " -a acpi_dsdt Attach compiled ACPI DSDT (Differentiated" +- $cmd " System Description Table) to initrd. This" +- $cmd " replaces the DSDT of the BIOS. Defaults to" +- $cmd " the ACPI_DSDT variable in /etc/sysconfig/kernel." ++ $cmd " -a acpi_dsdt Obsolete, do not use." + $cmd " -s size Add splash animation and bootscreen to initrd." + + [[ $1 = '-n' ]] && exit 0 +@@ -204,8 +199,6 @@ default_kernel_images() { + for initrd_image in $initrd_images;do + targets="$targets $initrd_image" + done +- host_only=1 +- force=1 + } + + while (($# > 0)); do +@@ -218,8 +211,6 @@ while (($# > 0)); do + for kernel_image in $kernel_images;do + kernels="$kernels ${kernel_image#*-}" + done +- host_only=1 +- force=1 + ;; + -i) read_arg initrd_images "$@" || shift $? + for initrd_image in $initrd_images;do +@@ -261,7 +252,7 @@ while (($# > 0)); do + dracut_cmdline="${dracut_cmdline} ip=$(ipconfig $static_if)": + ;; + -a) read_arg acpi_dsdt "$@" || shift $? +- echo "mkinitrd: custom DSDT not yet supported" ++ echo "Obsolete -a param, use acpi_table_dir= and acpi_override= variables in /etc/dracut.conf.d/" + exit 1 + ;; + -s) read_arg boot_splash "$@" || shift $? +@@ -275,7 +266,6 @@ while (($# > 0)); do + --version|-R) + echo "mkinitrd: dracut compatibility wrapper" + exit 0;; +- --force) force=1;; + --quiet|-q) quiet=1;; + *) if [[ ! $targets ]]; then + targets=$1 +@@ -289,15 +279,17 @@ while (($# > 0)); do + done + + [[ $targets && $kernels ]] || default_kernel_images +-[[ $targets && $kernels ]] || (error "No kernel found in $boot_dir" && usage) ++if [[ ! $targets || ! $kernels ]];then ++ error "No kernel found in $boot_dir" ++fi + + # We can have several targets/kernels, transform the list to an array + targets=( $targets ) + [[ $kernels ]] && kernels=( $kernels ) + + [[ $logfile ]] && dracut_args="${dracut_args} --logfile $logfile" +-[[ $host_only == 1 ]] && dracut_args="${dracut_args} --hostonly" +-[[ $force == 1 ]] && dracut_args="${dracut_args} --force" ++dracut_args="${dracut_args} --force" ++ + [[ $dracut_cmdline ]] && dracut_args="${dracut_args} --kernel-cmdline ${dracut_cmdline}" + [ -z "$(type -p update-bootloader)" ] && skip_update_bootloader=1 + +@@ -306,11 +298,9 @@ if [ -f /etc/sysconfig/kernel ] ; then + . /etc/sysconfig/kernel + fi + [[ $module_list ]] || module_list="${INITRD_MODULES}" +-basicmodules="$basicmodules ${module_list}" + [[ $domu_module_list ]] || domu_module_list="${DOMU_INITRD_MODULES}" +-[[ $acpi_dsdt ]] || acpi_dsdt="${ACPI_DSDT}" ++shopt -s extglob + +-echo "Creating: target|kernel|dracut args|basicmodules " + for ((i=0 ; $i<${#targets[@]} ; i++)); do + + if [[ $img_vers ]];then +@@ -320,28 +310,34 @@ for ((i=0 ; $i<${#targets[@]} ; i++)); do + fi + kernel="${kernels[$i]}" + ++ if is_xen_kernel $kernel $rootfs ; then ++ modules_all="${module_list} ${domu_module_list}" ++ else ++ modules_all="${module_list}" ++ fi ++ ++ # Remove leading and trailing spaces needs (set above): shopt -s extglob ++ modules_all=${modules_all%%+([[:space:]])} ++ modules_all=${modules_all##+([[:space:]])} ++ ++ echo "Creating initrd: $target" ++ + # Duplicate code: No way found how to redirect output based on $quiet + if [[ $quiet == 1 ]];then +- echo "$target|$kernel|$dracut_args|$basicmodules" +- if is_xen_kernel $kernel $rootfs ; then +- basicmodules="$basicmodules ${domu_module_list}" +- fi +- if [[ $basicmodules ]]; then +- $dracut_cmd $dracut_args --add-drivers "$basicmodules" "$target" \ +- "$kernel" &>/dev/null +- else ++ # Duplicate code: --force-drivers must not be called with empty string ++ # -> dracut bug workarounded ugly, because of complex whitespace ++ # expansion magics ++ if [ -n "${modules_all}" ];then ++ $dracut_cmd $dracut_args --force-drivers "${modules_all}" "$target" "$kernel" &>/dev/null ++ else + $dracut_cmd $dracut_args "$target" "$kernel" &>/dev/null +- fi ++ fi + else +- if is_xen_kernel $kernel $rootfs ; then +- basicmodules="$basicmodules ${domu_module_list}" +- fi +- if [[ $basicmodules ]]; then +- $dracut_cmd $dracut_args --add-drivers "$basicmodules" "$target" \ +- "$kernel" +- else ++ if [ -n "${modules_all}" ];then ++ $dracut_cmd $dracut_args --force-drivers "${modules_all}" "$target" "$kernel" ++ else + $dracut_cmd $dracut_args "$target" "$kernel" +- fi ++ fi + fi + done + diff --git a/0032-systemd-always-tries-to-load-autofs4.patch b/0032-systemd-always-tries-to-load-autofs4.patch new file mode 100644 index 0000000..174056e --- /dev/null +++ b/0032-systemd-always-tries-to-load-autofs4.patch @@ -0,0 +1,29 @@ +From ae8e6ed5afc1a58c40a2f6b4ec668545dc4841fe Mon Sep 17 00:00:00 2001 +From: Thomas Renninger +Date: Thu, 11 Dec 2014 15:45:53 +0100 +Subject: [PATCH] systemd always tries to load autofs4 + +During boot systemd tries to load autofs4, but dracut will only +add it if it's loaded by the time dracut is run. +Modify dracut to always load autofs4. + +References: bnc#869411 + +Signed-off-by: Thomas Renninger +--- + modules.d/98systemd/module-setup.sh | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/modules.d/98systemd/module-setup.sh b/modules.d/98systemd/module-setup.sh +index 8052984..53e07a2 100755 +--- a/modules.d/98systemd/module-setup.sh ++++ b/modules.d/98systemd/module-setup.sh +@@ -18,7 +18,7 @@ depends() { + } + + installkernel() { +- instmods autofs4 ipv6 ++ hostonly='' instmods autofs4 ipv6 + instmods -s efivarfs + } + diff --git a/0033-Fixup-mdraid-setup.patch b/0033-Fixup-mdraid-setup.patch new file mode 100644 index 0000000..c2045b9 --- /dev/null +++ b/0033-Fixup-mdraid-setup.patch @@ -0,0 +1,29 @@ +From 36894743e3105e4831a2d04fc5671c16fc5900c2 Mon Sep 17 00:00:00 2001 +From: NeilBrown +Date: Thu, 11 Dec 2014 15:45:54 +0100 +Subject: [PATCH] Fixup mdraid setup + +This sed script to edit 64-md-raid-assemble.rules needs to +be adjusted for latest mdadm + +References: bnc#866660 + +Signed-off-by: NeilBrown +Signed-off-by: Thomas Renninger +--- + modules.d/90mdraid/module-setup.sh | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/modules.d/90mdraid/module-setup.sh b/modules.d/90mdraid/module-setup.sh +index bc4c514..ce3394a 100755 +--- a/modules.d/90mdraid/module-setup.sh ++++ b/modules.d/90mdraid/module-setup.sh +@@ -86,7 +86,7 @@ install() { + for rule in 64-md-raid.rules 64-md-raid-assembly.rules; do + rule_path="${initdir}${udevdir}/rules.d/${rule}" + [ -f "${rule_path}" ] && sed -i -r \ +- -e '/RUN\+?="[[:alpha:]/]*mdadm[[:blank:]]+(--incremental|-I)[[:blank:]]+(\$env\{DEVNAME\}|\$tempnode|\$devnode)/d' \ ++ -e '/(RUN|IMPORT\{program\})\+?="[[:alpha:]/]*mdadm[[:blank:]]+(--incremental|-I)[[:blank:]]+(--export )?(\$env\{DEVNAME\}|\$tempnode|\$devnode)/d' \ + "${rule_path}" + done + diff --git a/0034-95udev-rules-Include-correct-sg3_utils-rules.patch b/0034-95udev-rules-Include-correct-sg3_utils-rules.patch new file mode 100644 index 0000000..e217140 --- /dev/null +++ b/0034-95udev-rules-Include-correct-sg3_utils-rules.patch @@ -0,0 +1,29 @@ +From 15eed1e4f1d3b72a6112cce686f00d0c97ec616d Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:45:55 +0100 +Subject: [PATCH] 95udev-rules: Include correct sg3_utils rules + +sg3_utils now provides two rules 55-scsi-sg3_id.rules and +58-scsi-sg3_symlink.rules, which need to be included instead +of the older 59-scsi-sg3_utils.rules. + +References: bnc#873151 + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/95udev-rules/module-setup.sh | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/modules.d/95udev-rules/module-setup.sh b/modules.d/95udev-rules/module-setup.sh +index 9d6f960..e50709d 100755 +--- a/modules.d/95udev-rules/module-setup.sh ++++ b/modules.d/95udev-rules/module-setup.sh +@@ -31,6 +31,7 @@ install() { + 50-udev.rules 95-late.rules \ + 50-firmware.rules \ + 59-scsi-sg3_utils.rules \ ++ 55-scsi-sg3_id.rules 58-scsi-sg3_symlink.rules \ + 70-uaccess.rules 71-seat.rules 73-seat-late.rules \ + 75-net-description.rules \ + 80-net-name-slot.rules 80-net-setup-link.rules \ diff --git a/0035-90multipath-install-correct-multipath-rules.patch b/0035-90multipath-install-correct-multipath-rules.patch new file mode 100644 index 0000000..fa4a29b --- /dev/null +++ b/0035-90multipath-install-correct-multipath-rules.patch @@ -0,0 +1,33 @@ +From 8f4ee8c71b05948c1b65f7cde49c0a4236d91f03 Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:45:56 +0100 +Subject: [PATCH] 90multipath: install correct multipath rules + +The multipath and kpartx rules have different numbers in SUSE. + +The 11-dm-mpath.rules file had been missing, causing +blacklisting to not work properly. + +References: bnc#873151, bnc#872662, bnc#883149 + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/90multipath/module-setup.sh | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +diff --git a/modules.d/90multipath/module-setup.sh b/modules.d/90multipath/module-setup.sh +index a8700f4..0f88f82 100755 +--- a/modules.d/90multipath/module-setup.sh ++++ b/modules.d/90multipath/module-setup.sh +@@ -114,6 +114,9 @@ install() { + + inst_hook cleanup 80 "$moddir/multipathd-needshutdown.sh" + +- inst_rules 40-multipath.rules 62-multipath.rules 65-multipath.rules 66-kpartx.rules ++ inst_rules 40-multipath.rules 56-multipath.rules \ ++ 62-multipath.rules 65-multipath.rules \ ++ 66-kpartx.rules 67-kpartx-compat.rules \ ++ 11-dm-mpath.rules + } + diff --git a/0036-95iscsi-Autodetect-iSCSI-firmware.patch b/0036-95iscsi-Autodetect-iSCSI-firmware.patch new file mode 100644 index 0000000..b3a9f07 --- /dev/null +++ b/0036-95iscsi-Autodetect-iSCSI-firmware.patch @@ -0,0 +1,85 @@ +From 442abd16d2cfc6e006738a7373dc14445d22448f Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:45:57 +0100 +Subject: [PATCH] 95iscsi: Autodetect iSCSI firmware + +Some iSCSI initiator present firmware information in +/sys/firmware/ibft or /sys/firmware/iscsi_bootX + +Whenever we detect one of those directories we should assume +that the iSCSI devices should be activated. + +Also incorporates SUSE patches: +0049: +95iscsi: Use 'ip=ibft' for ibft autoconfiguration + +For iBFT autoconfiguration we should be setting 'ip=ibft' +instead of rd.neednet. This should instruct dracut to only +enable the iBFT interfaces and leave the rest alone. + +References: bnc#879038 + +0054: +95iscsi: update commandline printing + +dracut has a separate callout 'cmdline' which should be used +for printing out the generated commandline. + +Signed-off-by: Pavel Wieczorkiewicz +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/95iscsi/module-setup.sh | 26 ++++++++++++++++++++++++++ + 1 file changed, 26 insertions(+) + +diff --git a/modules.d/95iscsi/module-setup.sh b/modules.d/95iscsi/module-setup.sh +index 8b42d3e..5d2a39b 100755 +--- a/modules.d/95iscsi/module-setup.sh ++++ b/modules.d/95iscsi/module-setup.sh +@@ -28,6 +28,21 @@ check() { + return 0 + } + ++install_ibft() { ++ # When iBFT / iscsi_boot is detected: ++ # - Use 'ip=ibft' to set up iBFT network interface ++ # - specify firmware booting cmdline parameter ++ ++ for d in /sys/firmware/* ; do ++ if [ -d ${d}/initiator ] ; then ++ if [ ${d##*/} = "ibft" ] ; then ++ echo -n "ip=ibft " ++ fi ++ echo -n "rd.iscsi.firmware=1" ++ fi ++ done ++} ++ + # called by dracut + depends() { + echo network rootfs-block +@@ -37,6 +52,12 @@ depends() { + installkernel() { + local _arch=$(uname -m) + ++ # Detect iBFT and perform mandatory steps ++ if [[ $hostonly_cmdline == "yes" ]] ; then ++ install_ibft > "${initdir}/etc/cmdline.d/95iscsi.conf" ++ echo >> "${initdir}/etc/cmdline.d/95iscsi.conf" ++ fi ++ + instmods bnx2i qla4xxx cxgb3i cxgb4i be2iscsi + hostonly="" instmods iscsi_tcp iscsi_ibft crc32c iscsi_boot_sysfs + iscsi_module_filter() { +@@ -77,6 +98,11 @@ installkernel() { + } + + # called by dracut ++cmdline() { ++ install_ibft ++} ++ ++# called by dracut + install() { + inst_multiple umount iscsistart hostname iscsi-iname + inst_multiple -o iscsiuio diff --git a/0037-95iscsi-Install-libgcc_s-library.patch b/0037-95iscsi-Install-libgcc_s-library.patch new file mode 100644 index 0000000..a4b5ad4 --- /dev/null +++ b/0037-95iscsi-Install-libgcc_s-library.patch @@ -0,0 +1,29 @@ +From 4aad3438f7e9fcd58f6c65d2d0d52c0a0db1f00a Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:45:58 +0100 +Subject: [PATCH] 95iscsi: Install libgcc_s library + +iscsiuio is using pthread, which requires libgcc_s for +pthread_cancel to work. +Without this library iscsiuio will crash with SIGABRT. + +References: bnc#881692 + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/95iscsi/module-setup.sh | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/modules.d/95iscsi/module-setup.sh b/modules.d/95iscsi/module-setup.sh +index 5d2a39b..3641fb8 100755 +--- a/modules.d/95iscsi/module-setup.sh ++++ b/modules.d/95iscsi/module-setup.sh +@@ -106,6 +106,7 @@ cmdline() { + install() { + inst_multiple umount iscsistart hostname iscsi-iname + inst_multiple -o iscsiuio ++ inst_libdir_file 'libgcc_s.so*' + inst_hook cmdline 90 "$moddir/parse-iscsiroot.sh" + inst_hook cleanup 90 "$moddir/cleanup-iscsi.sh" + inst "$moddir/iscsiroot.sh" "/sbin/iscsiroot" diff --git a/0038-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch b/0038-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch new file mode 100644 index 0000000..a962e45 --- /dev/null +++ b/0038-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch @@ -0,0 +1,35 @@ +From a3a2266046299ef4cfed48ce3a2e6bb573ee0dc7 Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:45:59 +0100 +Subject: [PATCH] 95iscsi: Set correct iscsi_started value for iSCSI firmware + +When iSCSI firmware booting is selected we should not rely on +'netroot' or 'iscsiroot' variables to be set. + +References: bnc#873448 + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/95iscsi/parse-iscsiroot.sh | 8 ++++++-- + 1 file changed, 6 insertions(+), 2 deletions(-) + +diff --git a/modules.d/95iscsi/parse-iscsiroot.sh b/modules.d/95iscsi/parse-iscsiroot.sh +index ca57668..85c3027 100755 +--- a/modules.d/95iscsi/parse-iscsiroot.sh ++++ b/modules.d/95iscsi/parse-iscsiroot.sh +@@ -90,8 +90,12 @@ if [ -n "$netroot" ] && [ "$root" != "/dev/root" ] && [ "$root" != "dhcp" ]; the + fi + fi + +-netroot_enc=$(str_replace "$netroot" '/' '\2f') +-echo "[ -f '/tmp/iscsistarted-$netroot_enc' ]" > $hookdir/initqueue/finished/iscsi_started.sh ++if [ -n "$iscsi_firmware" ] ; then ++ echo "[ -f '/tmp/iscsistarted-firmware' ]" > $hookdir/initqueue/finished/iscsi_started.sh ++else ++ netroot_enc=$(str_replace "$netroot" '/' '\2f') ++ echo "[ -f '/tmp/iscsistarted-$netroot_enc' ]" > $hookdir/initqueue/finished/iscsi_started.sh ++fi + + # Done, all good! + rootok=1 diff --git a/0039-95iscsi-strip-one-set-of-quotes-when-calling-initque.patch b/0039-95iscsi-strip-one-set-of-quotes-when-calling-initque.patch new file mode 100644 index 0000000..13d8bbb --- /dev/null +++ b/0039-95iscsi-strip-one-set-of-quotes-when-calling-initque.patch @@ -0,0 +1,52 @@ +From 9ebf4a5d3c1b47d7e681b2331cf062920613bf2e Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:00 +0100 +Subject: [PATCH] 95iscsi: strip one set of quotes when calling initqueue + +The bad initqueue parameter passing is already addressed by git commit: +commit bb8c16d12178373f17553294603ff5187e318b51 +and +commit 486a8f33e2edaf249e3a09c98a910094e201cf9e + +However this appraoch is slightly different: +"$netroot" instead of "'$netroot'", etc. + +initqueue will process the arguments, assuming the first non-option +argument to be the program to be executed. Putting the entire +commandline into this argument confuses both, initqueue and the +program in question. + +References: bnc#879038 + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/95iscsi/parse-iscsiroot.sh | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/modules.d/95iscsi/parse-iscsiroot.sh b/modules.d/95iscsi/parse-iscsiroot.sh +index 85c3027..37e46ad 100755 +--- a/modules.d/95iscsi/parse-iscsiroot.sh ++++ b/modules.d/95iscsi/parse-iscsiroot.sh +@@ -59,10 +59,10 @@ fi + + # iscsi_firmware does not need argument checking + if [ -n "$iscsi_firmware" ] ; then +- netroot=${netroot:-iscsi:} ++ [ -z "$netroot" ] && netroot=iscsi: + modprobe -q iscsi_boot_sysfs 2>/dev/null + modprobe -q iscsi_ibft +- initqueue --onetime --timeout /sbin/iscsiroot dummy "'$netroot'" "'$NEWROOT'" ++ initqueue --onetime --timeout /sbin/iscsiroot dummy "$netroot" "$NEWROOT" + fi + + # If it's not iscsi we don't continue +@@ -86,7 +86,7 @@ fi + + if [ -n "$netroot" ] && [ "$root" != "/dev/root" ] && [ "$root" != "dhcp" ]; then + if ! getargbool 1 rd.neednet >/dev/null || ! getarg "ip="; then +- initqueue --onetime --settled /sbin/iscsiroot dummy "'$netroot'" "'$NEWROOT'" ++ initqueue --onetime --settled /sbin/iscsiroot dummy "$netroot" "$NEWROOT" + fi + fi + diff --git a/0040-95iscsi-Fixup-bnx2i-offload-booting.patch b/0040-95iscsi-Fixup-bnx2i-offload-booting.patch new file mode 100644 index 0000000..84094cc --- /dev/null +++ b/0040-95iscsi-Fixup-bnx2i-offload-booting.patch @@ -0,0 +1,67 @@ +From 2e34f3809524d5a69e06a51e13bb3f41b300b4ed Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:01 +0100 +Subject: [PATCH] 95iscsi: Fixup bnx2i offload booting + +bnx2i is using a separate iSCSI offload engine with a separate +MAC address. As a result, the iBFT information is displaying +a MAC address which does not relate to any MAC address from +the network interfaces. +In addition, the iSCSI offload engine works independently on +the NIC, so we do not need to enable the NIC for iSCSI offload +to work. +This patch modifies the automatic iBFT detection to not set +the 'ip=ibft' flag when bnx2i offload is detected. + +References: bnc#855747 + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/95iscsi/module-setup.sh | 26 +++++++++++++++++++++++++- + 1 file changed, 25 insertions(+), 1 deletion(-) + +diff --git a/modules.d/95iscsi/module-setup.sh b/modules.d/95iscsi/module-setup.sh +index 3641fb8..d30e64f 100755 +--- a/modules.d/95iscsi/module-setup.sh ++++ b/modules.d/95iscsi/module-setup.sh +@@ -28,14 +28,38 @@ check() { + return 0 + } + ++get_ibft_mod() { ++ local ibft_mac=$1 ++ # Return the iSCSI offload module for a given MAC address ++ iscsiadm -m iface | while read iface_name iface_desc ; do ++ IFS=$',' ++ set -- $iface_desc ++ if [ "$ibft_mac" = "$2" ] ; then ++ echo $1 ++ return 0 ++ fi ++ unset IFS ++ done ++} ++ + install_ibft() { + # When iBFT / iscsi_boot is detected: + # - Use 'ip=ibft' to set up iBFT network interface ++ # Note: bnx2i is using a different MAC address of iSCSI offloading ++ # so the 'ip=ibft' parameter must not be set + # - specify firmware booting cmdline parameter + + for d in /sys/firmware/* ; do ++ if [ -d ${d}/ethernet0 ] ; then ++ read ibft_mac < ${d}/ethernet0/mac ++ ibft_mod=$(get_ibft_mod $ibft_mac) ++ fi ++ if [ -z "$ibft_mod" ] && [ -d ${d}/ethernet1 ] ; then ++ read ibft_mac < ${d}/ethernet1/mac ++ ibft_mod=$(get_ibft_mod $ibft_mac) ++ fi + if [ -d ${d}/initiator ] ; then +- if [ ${d##*/} = "ibft" ] ; then ++ if [ ${d##*/} = "ibft" ] && [ "$ibft_mod" != "bnx2i" ] ; then + echo -n "ip=ibft " + fi + echo -n "rd.iscsi.firmware=1" diff --git a/0041-95iscsi-More-empty-cmdline-fixes.patch b/0041-95iscsi-More-empty-cmdline-fixes.patch new file mode 100644 index 0000000..3a455e7 --- /dev/null +++ b/0041-95iscsi-More-empty-cmdline-fixes.patch @@ -0,0 +1,45 @@ +From 54e28d79b9f67b8be349ae97f92dde2c6c118e11 Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:02 +0100 +Subject: [PATCH] 95iscsi: More empty cmdline fixes + +This fixes up some 95iscsi/module-setup.sh which might print out empty +commandline files. + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/95iscsi/module-setup.sh | 13 +++++++------ + 1 file changed, 7 insertions(+), 6 deletions(-) + +diff --git a/modules.d/95iscsi/module-setup.sh b/modules.d/95iscsi/module-setup.sh +index d30e64f..29bba82 100755 +--- a/modules.d/95iscsi/module-setup.sh ++++ b/modules.d/95iscsi/module-setup.sh +@@ -76,12 +76,6 @@ depends() { + installkernel() { + local _arch=$(uname -m) + +- # Detect iBFT and perform mandatory steps +- if [[ $hostonly_cmdline == "yes" ]] ; then +- install_ibft > "${initdir}/etc/cmdline.d/95iscsi.conf" +- echo >> "${initdir}/etc/cmdline.d/95iscsi.conf" +- fi +- + instmods bnx2i qla4xxx cxgb3i cxgb4i be2iscsi + hostonly="" instmods iscsi_tcp iscsi_ibft crc32c iscsi_boot_sysfs + iscsi_module_filter() { +@@ -131,6 +125,13 @@ install() { + inst_multiple umount iscsistart hostname iscsi-iname + inst_multiple -o iscsiuio + inst_libdir_file 'libgcc_s.so*' ++ ++ # Detect iBFT and perform mandatory steps ++ if [[ $hostonly_cmdline == "yes" ]] ; then ++ local _ibftconf=$(install_ibft) ++ [[ $_ibftconf ]] && printf "%s\n" "$_ibftconf" >> "${initdir}/etc/cmdline.d/95iscsi.conf" ++ fi ++ + inst_hook cmdline 90 "$moddir/parse-iscsiroot.sh" + inst_hook cleanup 90 "$moddir/cleanup-iscsi.sh" + inst "$moddir/iscsiroot.sh" "/sbin/iscsiroot" diff --git a/0042-95iscsi-generate-commandline-for-software-iscsi.patch b/0042-95iscsi-generate-commandline-for-software-iscsi.patch new file mode 100644 index 0000000..647268a --- /dev/null +++ b/0042-95iscsi-generate-commandline-for-software-iscsi.patch @@ -0,0 +1,142 @@ +From c4d8793c67cb75804dfb8b14985e125a22f212eb Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:03 +0100 +Subject: [PATCH] 95iscsi: generate commandline for software iscsi + +When installing on an software iscsi root we need to generate +the correct commandline, otherwise the system cannot boot. + +References: bnc#880108 +Patch: 0093 + +When using software iscsi we should be using the existing +configuration from the system for the time being. + +References: bnc#884768 +Patch: 0095 + +Avoid bad ip route call on empty address +Patch: 0143 + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/95iscsi/module-setup.sh | 91 +++++++++++++++++++++++++++++++++++++-- + 1 file changed, 88 insertions(+), 3 deletions(-) + +diff --git a/modules.d/95iscsi/module-setup.sh b/modules.d/95iscsi/module-setup.sh +index 29bba82..cd6cb4b 100755 +--- a/modules.d/95iscsi/module-setup.sh ++++ b/modules.d/95iscsi/module-setup.sh +@@ -67,6 +67,84 @@ install_ibft() { + done + } + ++install_iscsiroot() { ++ local devpath=$1 ++ local scsi_path iscsi_lun session c d conn ++ local iscsi_session iscsi_address iscsi_port iscsi_targetname iscsi_tpgt ++ ++ scsi_path=${devpath%%/block*} ++ [ "$scsi_path" = "$devpath" ] && return 1 ++ iscsi_lun=${scsi_path##*:} ++ [ "$iscsi_lun" = "$scsi_path" ] && return 1 ++ session=${devpath%%/target*} ++ [ "$session" = "$devpath" ] && return 1 ++ iscsi_session=${session##*/} ++ [ "$iscsi_session" = "$session" ] && return 1 ++ ++ for d in ${session}/* ; do ++ case $d in ++ *connection*) ++ c=${d##*/} ++ conn=${d}/iscsi_connection/${c} ++ if [ -d ${conn} ] ; then ++ iscsi_address=$(cat ${conn}/persistent_address) ++ iscsi_port=$(cat ${conn}/persistent_port) ++ fi ++ ;; ++ *session) ++ if [ -d ${d}/${iscsi_session} ] ; then ++ iscsi_initiator=$(cat ${d}/${iscsi_session}/initiatorname) ++ iscsi_targetname=$(cat ${d}/${iscsi_session}/targetname) ++ fi ++ ;; ++ esac ++ done ++ ++ [ -z "$iscsi_address" ] && return ++ local_address=$(ip -o route get to $iscsi_address | sed -n 's/.*src \([0-9a-f.:]*\).*/\1/p') ++ ifname=$(ip -o route get to $iscsi_address | sed -n 's/.*dev \([^ ]*\).*/\1/p') ++ printf 'ip=%s:static ' ${ifname} ++ ++ if [ -e /sys/class/net/$ifname/address ] ; then ++ ifmac=$(cat /sys/class/net/$ifname/address) ++ printf 'ifname=%s:%s ' ${ifname} ${ifmac} ++ fi ++ ++ if [ -n "$iscsi_address" -a -n "$iscsi_targetname" ] ; then ++ if [ -n "$iscsi_port" -a "$iscsi_port" -eq 3260 ] ; then ++ iscsi_port= ++ fi ++ if [ -n "$iscsi_lun" -a "$iscsi_lun" -eq 0 ] ; then ++ iscsi_lun= ++ fi ++ # In IPv6 case rd.iscsi.initatior= must pass address in [] brackets ++ case "$iscsi_address" in ++ *:*) ++ iscsi_address="[$iscsi_address]" ++ ;; ++ esac ++ echo "rd.iscsi.initiator=${iscsi_initiator} netroot=iscsi:${iscsi_address}::${iscsi_port}:${iscsi_lun}:${iscsi_targetname}" ++ fi ++ return 0 ++} ++ ++ ++install_softiscsi() { ++ [ -d /sys/firmware/ibft ] && return 0 ++ ++ is_softiscsi() { ++ local _dev=$1 ++ local iscsi_dev ++ ++ [[ -L "/sys/dev/block/$_dev" ]] || return ++ iscsi_dev=$(cd -P /sys/dev/block/$_dev; echo $PWD) ++ install_iscsiroot $iscsi_dev ++ } ++ ++ for_each_host_dev_and_slaves_all is_softiscsi || return 255 ++ return 0 ++} ++ + # called by dracut + depends() { + echo network rootfs-block +@@ -117,7 +195,14 @@ installkernel() { + + # called by dracut + cmdline() { +- install_ibft ++ local _iscsiconf=$(install_ibft) ++ { ++ if [ "$_iscsiconf" ] ; then ++ echo ${_iscsiconf} ++ else ++ install_softiscsi ++ fi ++ } | sort | uniq + } + + # called by dracut +@@ -128,8 +213,8 @@ install() { + + # Detect iBFT and perform mandatory steps + if [[ $hostonly_cmdline == "yes" ]] ; then +- local _ibftconf=$(install_ibft) +- [[ $_ibftconf ]] && printf "%s\n" "$_ibftconf" >> "${initdir}/etc/cmdline.d/95iscsi.conf" ++ local _iscsiconf=$(cmdline) ++ [[ $_iscsiconf ]] && printf "%s\n" "$_iscsiconf" >> "${initdir}/etc/cmdline.d/95iscsi.conf" + fi + + inst_hook cmdline 90 "$moddir/parse-iscsiroot.sh" diff --git a/0043-iscsi-iscsi.initiator-and-others-can-and-must-only-s.patch b/0043-iscsi-iscsi.initiator-and-others-can-and-must-only-s.patch new file mode 100644 index 0000000..8d5593d --- /dev/null +++ b/0043-iscsi-iscsi.initiator-and-others-can-and-must-only-s.patch @@ -0,0 +1,70 @@ +From f34a2ef14df05affa3347d7191ff324bcb547e79 Mon Sep 17 00:00:00 2001 +From: Thomas Renninger +Date: Thu, 11 Dec 2014 15:46:04 +0100 +Subject: [PATCH] iscsi: iscsi.initiator and others can and must only show up + once + +Make sure duplicates of iscsi.initiator vanish. +Only get one rd.iscsi.* paramter value. If getargs is used and several +parameters are parsed, one gets two values separated by whitespace in a +variable which breaks later code and is not suppported. + +Signed-off-by: Thomas Renninger +--- + modules.d/95iscsi/iscsiroot.sh | 18 +++++++++--------- + modules.d/95iscsi/module-setup.sh | 5 ++++- + 2 files changed, 13 insertions(+), 10 deletions(-) + +diff --git a/modules.d/95iscsi/iscsiroot.sh b/modules.d/95iscsi/iscsiroot.sh +index 7351427..5bfb017 100755 +--- a/modules.d/95iscsi/iscsiroot.sh ++++ b/modules.d/95iscsi/iscsiroot.sh +@@ -81,23 +81,23 @@ handle_netroot() + local p + + # override conf settings by command line options +- arg=$(getargs rd.iscsi.initiator -d iscsi_initiator=) ++ arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=) + [ -n "$arg" ] && iscsi_initiator=$arg +- arg=$(getargs rd.iscsi.target.name -d iscsi_target_name=) ++ arg=$(getarg rd.iscsi.target.name -d iscsi_target_name=) + [ -n "$arg" ] && iscsi_target_name=$arg +- arg=$(getargs rd.iscsi.target.ip -d iscsi_target_ip) ++ arg=$(getarg rd.iscsi.target.ip -d iscsi_target_ip) + [ -n "$arg" ] && iscsi_target_ip=$arg +- arg=$(getargs rd.iscsi.target.port -d iscsi_target_port=) ++ arg=$(getarg rd.iscsi.target.port -d iscsi_target_port=) + [ -n "$arg" ] && iscsi_target_port=$arg +- arg=$(getargs rd.iscsi.target.group -d iscsi_target_group=) ++ arg=$(getarg rd.iscsi.target.group -d iscsi_target_group=) + [ -n "$arg" ] && iscsi_target_group=$arg +- arg=$(getargs rd.iscsi.username -d iscsi_username=) ++ arg=$(getarg rd.iscsi.username -d iscsi_username=) + [ -n "$arg" ] && iscsi_username=$arg +- arg=$(getargs rd.iscsi.password -d iscsi_password) ++ arg=$(getarg rd.iscsi.password -d iscsi_password) + [ -n "$arg" ] && iscsi_password=$arg +- arg=$(getargs rd.iscsi.in.username -d iscsi_in_username=) ++ arg=$(getarg rd.iscsi.in.username -d iscsi_in_username=) + [ -n "$arg" ] && iscsi_in_username=$arg +- arg=$(getargs rd.iscsi.in.password -d iscsi_in_password=) ++ arg=$(getarg rd.iscsi.in.password -d iscsi_in_password=) + [ -n "$arg" ] && iscsi_in_password=$arg + for p in $(getargs rd.iscsi.param -d iscsi_param); do + iscsi_param="$iscsi_param --param $p" +diff --git a/modules.d/95iscsi/module-setup.sh b/modules.d/95iscsi/module-setup.sh +index cd6cb4b..9975e59 100755 +--- a/modules.d/95iscsi/module-setup.sh ++++ b/modules.d/95iscsi/module-setup.sh +@@ -123,7 +123,10 @@ install_iscsiroot() { + iscsi_address="[$iscsi_address]" + ;; + esac +- echo "rd.iscsi.initiator=${iscsi_initiator} netroot=iscsi:${iscsi_address}::${iscsi_port}:${iscsi_lun}:${iscsi_targetname}" ++ # Must be two separate lines, so that "sort | uniq" commands later ++ # can sort out rd.iscsi.initiator= duplicates ++ echo "rd.iscsi.initiator=${iscsi_initiator}" ++ echo "netroot=iscsi:${iscsi_address}::${iscsi_port}:${iscsi_lun}:${iscsi_targetname}" + fi + return 0 + } diff --git a/0044-Implement-rd.timeout-to-modify-the-device-timeout.patch b/0044-Implement-rd.timeout-to-modify-the-device-timeout.patch new file mode 100644 index 0000000..a8df6c6 --- /dev/null +++ b/0044-Implement-rd.timeout-to-modify-the-device-timeout.patch @@ -0,0 +1,104 @@ +From 56663e7e322cdba5d66cb45424489fd84791a544 Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:05 +0100 +Subject: [PATCH] Implement 'rd.timeout' to modify the device timeout + +When generating units for devices the administrator might +want to use a different timeout than the default. +So implement a new parameter 'rd.timeout' for this. + +References: bnc#878770 + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + dracut.cmdline.7.asc | 7 ++++++- + modules.d/98systemd/rootfs-generator.sh | 7 +++++-- + modules.d/99base/dracut-lib.sh | 6 +++++- + 3 files changed, 16 insertions(+), 4 deletions(-) + +diff --git a/dracut.cmdline.7.asc b/dracut.cmdline.7.asc +index 8e4835d..5ff84ef 100644 +--- a/dracut.cmdline.7.asc ++++ b/dracut.cmdline.7.asc +@@ -142,11 +142,16 @@ Misc + have been loaded. This parameter can be specified multiple times. + + **rd.retry=**____:: +- specify how long dracut should wait for devices to appear. ++ specify how long dracut should retry the initqueue to configure devices. + The default is 30 seconds. After 2/3 of the time, degraded raids are force + started. If you have hardware, which takes a very long time to announce its + drives, you might want to extend this value. + ++**rd.timeout=**____:: ++ specify how long dracut should wait for devices to appear. The ++ default is '0', which means 'forever'. Note that this timeout ++ should be longer than rd.retry to allow for proper configuration. ++ + **rd.noverifyssl**:: + accept self-signed certificates for ssl downloads. + +diff --git a/modules.d/98systemd/rootfs-generator.sh b/modules.d/98systemd/rootfs-generator.sh +index 9523729..5b06137 100755 +--- a/modules.d/98systemd/rootfs-generator.sh ++++ b/modules.d/98systemd/rootfs-generator.sh +@@ -5,8 +5,11 @@ type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh + generator_wait_for_dev() + { + local _name ++ local _timeout + + _name="$(str_replace "$1" '/' '\x2f')" ++ _timeout=$(getarg rd.timeout) ++ _timeout=${_timeout:-0} + + [ -e "$hookdir/initqueue/finished/devexists-${_name}.sh" ] && return 0 + +@@ -27,7 +30,7 @@ generator_wait_for_dev() + mkdir -p /run/systemd/generator/${_name}.device.d + { + echo "[Unit]" +- echo "JobTimeoutSec=0" ++ echo "JobTimeoutSec=$_timeout" + } > /run/systemd/generator/${_name}.device.d/timeout.conf + fi + } +@@ -58,6 +61,6 @@ case "$root" in + rootok=1 ;; + esac + +-[ "${root%%:*}" = "block" ] && generator_wait_for_dev "${root#block:}" ++[ "${root%%:*}" = "block" ] && generator_wait_for_dev "${root#block:}" "$RDRETRY" + + exit 0 +diff --git a/modules.d/99base/dracut-lib.sh b/modules.d/99base/dracut-lib.sh +index 5fc5615..f7cffc4 100755 +--- a/modules.d/99base/dracut-lib.sh ++++ b/modules.d/99base/dracut-lib.sh +@@ -890,12 +890,16 @@ wait_for_dev() + local _name + local _needreload + local _noreload ++ local _timeout + + if [ "$1" = "-n" ]; then + _noreload=1 + shift + fi + ++ _timeout=$(getarg rd.timeout) ++ _timeout=${_timeout:-0} ++ + _name="$(str_replace "$1" '/' '\x2f')" + + type mark_hostonly >/dev/null 2>&1 && mark_hostonly "$hookdir/initqueue/finished/devexists-${_name}.sh" +@@ -922,7 +926,7 @@ wait_for_dev() + mkdir -p ${PREFIX}/etc/systemd/system/${_name}.device.d + { + echo "[Unit]" +- echo "JobTimeoutSec=0" ++ echo "JobTimeoutSec=$_timeout" + } > ${PREFIX}/etc/systemd/system/${_name}.device.d/timeout.conf + type mark_hostonly >/dev/null 2>&1 && mark_hostonly /etc/systemd/system/${_name}.device.d/timeout.conf + _needreload=1 diff --git a/0045-Do-not-call-lvm-for-non-LVM-device-mapper-devices.patch b/0045-Do-not-call-lvm-for-non-LVM-device-mapper-devices.patch new file mode 100644 index 0000000..5482757 --- /dev/null +++ b/0045-Do-not-call-lvm-for-non-LVM-device-mapper-devices.patch @@ -0,0 +1,35 @@ +From 3244bf59816096377edee6f8937f16838dc1a709 Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:06 +0100 +Subject: [PATCH] Do not call 'lvm' for non-LVM device-mapper devices + +If a device-mapper device is not created by LVM it's pointless +to call any 'lvm' programs got extract details; they'll be +failing anyway. So check the UUID before calling 'lvm'. +This speeds up initrd creation and avoids I/O errors on +multipath devices. + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + dracut-functions.sh | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +diff --git a/dracut-functions.sh b/dracut-functions.sh +index 17a71f0..edd8ea9 100755 +--- a/dracut-functions.sh ++++ b/dracut-functions.sh +@@ -698,10 +698,12 @@ for_each_host_dev_and_slaves() + # but you cannot create the logical volume without the volume group. + # And the volume group might be bigger than the devices the LV needs. + check_vol_slaves() { +- local _lv _vg _pv ++ local _lv _vg _pv _dm + for i in /dev/mapper/*; do + [[ $i == /dev/mapper/control ]] && continue + _lv=$(get_maj_min $i) ++ _dm=/sys/dev/block/$_lv/dm ++ [[ -f $_dm/uuid && $(<$_dm/uuid) =~ LVM-* ]] || continue + if [[ $_lv = $2 ]]; then + _vg=$(lvm lvs --noheadings -o vg_name $i 2>/dev/null) + # strip space diff --git a/0046-Print-stored-dracut-commandline-during-initramfs-bui.patch b/0046-Print-stored-dracut-commandline-during-initramfs-bui.patch new file mode 100644 index 0000000..a8a49dd --- /dev/null +++ b/0046-Print-stored-dracut-commandline-during-initramfs-bui.patch @@ -0,0 +1,36 @@ +From fe273e3901f0931c3cc1365177f82f03b6560d30 Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:07 +0100 +Subject: [PATCH] Print stored dracut commandline during initramfs build + +When generating the initramfs we should be printing out the +generated dracut commandline used for booting. +This will simplify debugging. + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + dracut.sh | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +diff --git a/dracut.sh b/dracut.sh +index a542f33..cda7955 100755 +--- a/dracut.sh ++++ b/dracut.sh +@@ -1584,6 +1584,16 @@ if ! ( echo $PARMS_TO_STORE > $initdir/lib/dracut/build-parameter.txt ); then + exit 1 + fi + ++if [[ $hostonly_cmdline ]] ; then ++ if [ -d $initdir/etc/cmdline.d ];then ++ dinfo "Stored kernel commandline:" ++ for conf in $initdir/etc/cmdline.d/*.conf ; do ++ dinfo "$(< $conf)" ++ done ++ else ++ dinfo "No dracut internal kernel commandline stored in initrd" ++ fi ++fi + rm -f -- "$outfile" + dinfo "*** Creating image file ***" + diff --git a/0047-Align-dev_unit_name-with-systemd-s-function.patch b/0047-Align-dev_unit_name-with-systemd-s-function.patch new file mode 100644 index 0000000..08c7ebc --- /dev/null +++ b/0047-Align-dev_unit_name-with-systemd-s-function.patch @@ -0,0 +1,55 @@ +From e3eec4b8a21a640b7557678b92716a32f8d3dadf Mon Sep 17 00:00:00 2001 +From: Thorsten Behrens +Date: Thu, 11 Dec 2014 15:46:08 +0100 +Subject: [PATCH] Align dev_unit_name() with systemd's function. + +Add more corner cases from systemd's +unit_name_from_path_instance() C function. + +Signed-off-by: Thorsten Behrens +Signed-off-by: Thomas Renninger +--- + modules.d/99base/dracut-lib.sh | 24 ++++++++++++++++++------ + 1 file changed, 18 insertions(+), 6 deletions(-) + +diff --git a/modules.d/99base/dracut-lib.sh b/modules.d/99base/dracut-lib.sh +index f7cffc4..5c1504f 100755 +--- a/modules.d/99base/dracut-lib.sh ++++ b/modules.d/99base/dracut-lib.sh +@@ -866,18 +866,30 @@ wait_for_mount() + } >> "$hookdir/emergency/90-${_name}.sh" + } + ++# get a systemd-compatible unit name from a path ++# (mimicks unit_name_from_path_instance()) + dev_unit_name() + { ++ local dev="$1" ++ + if command -v systemd-escape >/dev/null; then +- systemd-escape -p "$1" ++ systemd-escape -p "$dev" + return + fi + +- _name="${1%%/}" +- _name="${_name##/}" +- _name="$(str_replace "$_name" '-' '\x2d')" +- _name="$(str_replace "$_name" '/' '-')" +- echo "$_name" ++ if [ "$dev" = "/" -o -z "$dev" ]; then ++ printf -- "-" ++ exit 0 ++ fi ++ ++ dev="${1%%/}" ++ dev="${dev##/}" ++ dev="$(str_replace "$dev" '\' '\x5c')" ++ dev="$(str_replace "$dev" '-' '\x2d')" ++ dev=${dev/#\./\\x2e} ++ dev="$(str_replace "$dev" '/' '-')" ++ ++ printf -- "%s" "$dev" + } + + # wait_for_dev diff --git a/0048-Generate-fallback-mount-unit-for-root-filesystem.patch b/0048-Generate-fallback-mount-unit-for-root-filesystem.patch new file mode 100644 index 0000000..a3139f1 --- /dev/null +++ b/0048-Generate-fallback-mount-unit-for-root-filesystem.patch @@ -0,0 +1,68 @@ +From bd44831b825da5bf38f883344c3e25844bee4df7 Mon Sep 17 00:00:00 2001 +From: Thorsten Behrens +Date: Thu, 11 Dec 2014 15:46:09 +0100 +Subject: [PATCH] Generate fallback mount unit for root filesystem + +If kernel cmdline has no root= provided, *and* the initrd carries +a default value, create a systemd mount unit to have it available +in /sysroot + +References: bnc#855258 + +Signed-off-by: Thorsten Behrens +Signed-off-by: Thomas Renninger +--- + modules.d/98systemd/rootfs-generator.sh | 34 ++++++++++++++++++++++++++++++++- + 1 file changed, 33 insertions(+), 1 deletion(-) + +diff --git a/modules.d/98systemd/rootfs-generator.sh b/modules.d/98systemd/rootfs-generator.sh +index 5b06137..f3c7d1f 100755 +--- a/modules.d/98systemd/rootfs-generator.sh ++++ b/modules.d/98systemd/rootfs-generator.sh +@@ -35,6 +35,35 @@ generator_wait_for_dev() + fi + } + ++generator_mount_rootfs() ++{ ++ local _type=$2 ++ local _flags=$3 ++ local _name ++ ++ [ -z "$1" ] && return 0 ++ ++ _name=$(dev_unit_name "$1") ++ [ -d /run/systemd/generator ] || mkdir -p /run/systemd/generator ++ if ! [ -f /run/systemd/generator/sysroot.mount ]; then ++ { ++ echo "[Unit]" ++ echo "Before=initrd-root-fs.target" ++ echo "RequiresOverridable=systemd-fsck@${_name}.service" ++ echo "After=systemd-fsck@${_name}.service" ++ echo "[Mount]" ++ echo "Where=/sysroot" ++ echo "What=$1" ++ echo "Options=${_flags}" ++ echo "Type=${_type}" ++ } > /run/systemd/generator/sysroot.mount ++ fi ++ if ! [ -L /run/systemd/generator/initrd-root-fs.target.requires/sysroot.mount ]; then ++ [ -d /run/systemd/generator/initrd-root-fs.target.requires ] || mkdir -p /run/systemd/generator/initrd-root-fs.target.requires ++ ln -s ../sysroot.mount /run/systemd/generator/initrd-root-fs.target.requires/sysroot.mount ++ fi ++} ++ + root=$(getarg root=) + case "$root" in + block:LABEL=*|LABEL=*) +@@ -61,6 +90,9 @@ case "$root" in + rootok=1 ;; + esac + +-[ "${root%%:*}" = "block" ] && generator_wait_for_dev "${root#block:}" "$RDRETRY" ++if [ "${root%%:*}" = "block" ]; then ++ generator_wait_for_dev "${root#block:}" "$RDRETRY" ++ grep -q 'root=' /proc/cmdline || generator_mount_rootfs "${root#block:}" "$(getarg rootfstype=)" "$(getarg rootflags=)" ++fi + + exit 0 diff --git a/0049-99base-warn-on-invalid-command-for-initqueue.patch b/0049-99base-warn-on-invalid-command-for-initqueue.patch new file mode 100644 index 0000000..e7a47bc --- /dev/null +++ b/0049-99base-warn-on-invalid-command-for-initqueue.patch @@ -0,0 +1,31 @@ +From 7c2311660f3f540c2ad9471bcc13686899d677cd Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:10 +0100 +Subject: [PATCH] 99base: warn on invalid command for initqueue + +When 'initqueue' is called with an invalid command it'll generate +invalid job scripts. This will lead to confusing error messages +later on. +So abort in these cases and print out a warning. + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/99base/initqueue.sh | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/modules.d/99base/initqueue.sh b/modules.d/99base/initqueue.sh +index 4a07da3..193cc5c 100755 +--- a/modules.d/99base/initqueue.sh ++++ b/modules.d/99base/initqueue.sh +@@ -42,6 +42,10 @@ exe=$1 + shift + + [ -x "$exe" ] || exe=$(command -v $exe) ++if [ -z "$exe" ] ; then ++ echo "Invalid command" ++ exit 1 ++fi + + { + [ -n "$onetime" ] && echo '[ -e "$job" ] && rm -f -- "$job"' diff --git a/0050-Handle-module-alias-properly.patch b/0050-Handle-module-alias-properly.patch new file mode 100644 index 0000000..ab306d1 --- /dev/null +++ b/0050-Handle-module-alias-properly.patch @@ -0,0 +1,36 @@ +From 3ae60e559f049ba41d5d198f27509721a245d6ea Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:11 +0100 +Subject: [PATCH] Handle module alias properly + +Some modules (like ext4) provide aliases by which the modules +can be accessed, too. But when using aliases directly dracut +fails to include the correct module. So translate the alias +into the correct module name before checking the module. + +References: bnc#886839 + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + dracut-functions.sh | 7 +++++++ + 1 file changed, 7 insertions(+) + +diff --git a/dracut-functions.sh b/dracut-functions.sh +index edd8ea9..7a12a76 100755 +--- a/dracut-functions.sh ++++ b/dracut-functions.sh +@@ -1689,6 +1689,13 @@ instmods() { + --*) _mpargs+=" $_mod" ;; + *) + _mod=${_mod##*/} ++ # Check for aliased modules ++ _modalias=$(modinfo -k $kernel -F filename $_mod 2> /dev/null) ++ _modalias=${_modalias%.ko} ++ if [ "${_modalias##*/}" != "$_mod" ] ; then ++ _mod=${_modalias##*/} ++ fi ++ + # if we are already installed, skip this module and go on + # to the next one. + if [[ $DRACUT_KERNEL_LAZY_HASHDIR ]] && \ diff --git a/0051-99base-Increase-initqueue-timeout-in-non-systemd-cas.patch b/0051-99base-Increase-initqueue-timeout-in-non-systemd-cas.patch new file mode 100644 index 0000000..4397b30 --- /dev/null +++ b/0051-99base-Increase-initqueue-timeout-in-non-systemd-cas.patch @@ -0,0 +1,28 @@ +From 517d27a75f678d4c295cbb07687453950b55df5a Mon Sep 17 00:00:00 2001 +From: Thomas Renninger +Date: Thu, 11 Dec 2014 15:46:12 +0100 +Subject: [PATCH] 99base: Increase initqueue timeout in non systemd case + +In case of systemd is used the timeout already is set to 180s, compare +with file: modules.d/98systemd/dracut-initqueue.sh + +Do the same if systemd is not used, e.g. in kdump case. + +Signed-off-by: Thomas Renninger +--- + modules.d/99base/init.sh | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/modules.d/99base/init.sh b/modules.d/99base/init.sh +index 7fcea4a..918dea5 100755 +--- a/modules.d/99base/init.sh ++++ b/modules.d/99base/init.sh +@@ -166,7 +166,7 @@ make_trace_mem "hook initqueue" '1:shortmem' '2+:mem' '3+:slab' + getarg 'rd.break=initqueue' -d 'rdbreak=initqueue' && emergency_shell -n initqueue "Break before initqueue" + + RDRETRY=$(getarg rd.retry -d 'rd_retry=') +-RDRETRY=${RDRETRY:-30} ++RDRETRY=${RDRETRY:-180} + RDRETRY=$(($RDRETRY*2)) + export RDRETRY + main_loop=0 diff --git a/0052-90lvm-Install-dm-snapshot-module.patch b/0052-90lvm-Install-dm-snapshot-module.patch new file mode 100644 index 0000000..a9cb20e --- /dev/null +++ b/0052-90lvm-Install-dm-snapshot-module.patch @@ -0,0 +1,27 @@ +From 5c84d51b3f258af9035a4031c6b482103adea4d9 Mon Sep 17 00:00:00 2001 +From: Thomas Renninger +Date: Thu, 11 Dec 2014 15:46:13 +0100 +Subject: [PATCH] 90lvm: Install dm-snapshot module + +bnc#888530 + +Signed-off-by: Thomas Renninger +--- + modules.d/90lvm/module-setup.sh | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/modules.d/90lvm/module-setup.sh b/modules.d/90lvm/module-setup.sh +index 9ddc56e..5515ac0 100755 +--- a/modules.d/90lvm/module-setup.sh ++++ b/modules.d/90lvm/module-setup.sh +@@ -42,6 +42,10 @@ cmdline() { + done + } + ++installkernel() { ++ instmods dm-snapshot ++} ++ + # called by dracut + install() { + local _i diff --git a/0053-Check-for-logfile-logfile-option-and-create-it-if-ne.patch b/0053-Check-for-logfile-logfile-option-and-create-it-if-ne.patch new file mode 100644 index 0000000..21d57f6 --- /dev/null +++ b/0053-Check-for-logfile-logfile-option-and-create-it-if-ne.patch @@ -0,0 +1,37 @@ +From 3838dc47c3f15128f171bfbd0eaf2e3e8641e4e8 Mon Sep 17 00:00:00 2001 +From: jloeser +Date: Thu, 11 Dec 2014 15:46:14 +0100 +Subject: [PATCH] Check for logfile (--logfile option) and create it if + necessary + +If a logfile is passed to dracut via --logfile option and doesn't +exist, dracut doesn't create it and logs nothing. Instead, dracut +should try to touch the file and print a warning if creating fails. + +References: bnc#892191 +Signed-off-by: Thomas Renninger +--- + dracut.sh | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +diff --git a/dracut.sh b/dracut.sh +index cda7955..79f36b6 100755 +--- a/dracut.sh ++++ b/dracut.sh +@@ -816,6 +816,16 @@ stdloglvl=$((stdloglvl + verbosity_mod_l)) + # eliminate IFS hackery when messing with fw_dir + fw_dir=${fw_dir//:/ } + ++# check for logfile and try to create one if it doesn't exist ++if [[ -n "$logfile" ]];then ++ if [[ ! -f "$logfile" ]];then ++ touch "$logfile" ++ if [ ! $? -eq 0 ] ;then ++ printf "%s\n" "dracut: touch $logfile failed." >&2 ++ fi ++ fi ++fi ++ + # handle compression options. + [[ $compress ]] || compress="gzip" + case $compress in diff --git a/0054-dracut.sh-Avoid-duplicate-devices-in-host_devs.patch b/0054-dracut.sh-Avoid-duplicate-devices-in-host_devs.patch new file mode 100644 index 0000000..8304a68 --- /dev/null +++ b/0054-dracut.sh-Avoid-duplicate-devices-in-host_devs.patch @@ -0,0 +1,91 @@ +From 118ca9ecfcc8cec0a428352355592717d0a44109 Mon Sep 17 00:00:00 2001 +From: Thomas Renninger +Date: Thu, 11 Dec 2014 15:46:15 +0100 +Subject: [PATCH] dracut.sh: Avoid duplicate devices in host_devs + +Signed-off-by: Thomas Renninger +--- + dracut.sh | 26 ++++++++++++++++++-------- + 1 file changed, 18 insertions(+), 8 deletions(-) + +diff --git a/dracut.sh b/dracut.sh +index 79f36b6..a4c7ce5 100755 +--- a/dracut.sh ++++ b/dracut.sh +@@ -219,6 +219,16 @@ push() { + done + } + ++# Fills up host_devs stack variable and makes sure there are no duplicates ++push_host_devs() { ++ local _dev ++ for _dev in ${host_devs[@]}; do ++ [ "$_dev" = "$1" ] && return ++ done ++ push host_devs "$1" ++} ++ ++ + # function pop() + # pops the last value from a stack + # assigns value to second argument variable +@@ -1062,25 +1072,25 @@ declare -A host_fs_types + for line in "${fstab_lines[@]}"; do + set -- $line + #dev mp fs fsopts +- push host_devs "$1" ++ push_host_devs "$1" + host_fs_types["$1"]="$3" + done + + for f in $add_fstab; do + [[ -e $f ]] || continue + while read dev rest; do +- push host_devs "$dev" ++ push_host_devs "$dev" + done < "$f" + done + + for dev in $add_device; do +- push host_devs "$dev" ++ push_host_devs "$dev" + done + + if (( ${#add_device_l[@]} )); then + while pop add_device_l val; do + add_device+=" $val " +- push host_devs "$val" ++ push_host_devs "$val" + done + fi + +@@ -1109,9 +1119,9 @@ if [[ $hostonly ]]; then + _dev=$(find_block_device "$mp") + _bdev=$(readlink -f "/dev/block/$_dev") + [[ -b $_bdev ]] && _dev=$_bdev +- push host_devs $_dev ++ push_host_devs $_dev + [[ "$mp" == "/" ]] && root_dev="$_dev" +- push host_devs "$_dev" ++ push_host_devs "$_dev" + done + + if [[ -f /proc/swaps ]] && [[ -f /etc/fstab ]]; then +@@ -1140,7 +1150,7 @@ if [[ $hostonly ]]; then + done < /etc/crypttab + fi + +- push host_devs "$(readlink -f "$dev")" ++ push_host_devs "$(readlink -f "$dev")" + break + done < /etc/fstab + done < /proc/swaps +@@ -1205,7 +1215,7 @@ for dev in "${!host_fs_types[@]}"; do + fi + if [[ $journaldev ]]; then + dev="$(readlink -f "$dev")" +- push host_devs "$dev" ++ push_host_devs "$dev" + _get_fs_type "$dev" + check_block_and_slaves_all _get_fs_type "$(get_maj_min "$dev")" + fi diff --git a/0055-dracut.sh-Fix-UUID-fstab-parsing-in-case-mount-optio.patch b/0055-dracut.sh-Fix-UUID-fstab-parsing-in-case-mount-optio.patch new file mode 100644 index 0000000..0c758c3 --- /dev/null +++ b/0055-dracut.sh-Fix-UUID-fstab-parsing-in-case-mount-optio.patch @@ -0,0 +1,50 @@ +From 6df523517f364882c51bbcc5b3245dd568eca3b3 Mon Sep 17 00:00:00 2001 +From: Thomas Renninger +Date: Thu, 11 Dec 2014 15:46:16 +0100 +Subject: [PATCH] dracut.sh: Fix UUID= fstab parsing in case --mount option is + passed + +Dracut parses /etc/fstab when --mount is option is passed (e.g. kdump). + +In host_devs variable the real block device must be stored, not UUID= +There are other /etc/fstab syntax possibilities we now warn that they +are not correctly parsed. This will be fixed by another patch +when there is time to test this properly. + +Signed-off-by: Thomas Renninger +--- + dracut.sh | 20 ++++++++++++++++++-- + 1 file changed, 18 insertions(+), 2 deletions(-) + +diff --git a/dracut.sh b/dracut.sh +index a4c7ce5..2eba19b 100755 +--- a/dracut.sh ++++ b/dracut.sh +@@ -1071,9 +1071,25 @@ declare -A host_fs_types + + for line in "${fstab_lines[@]}"; do + set -- $line ++ dev="$1" + #dev mp fs fsopts +- push_host_devs "$1" +- host_fs_types["$1"]="$3" ++ case "$dev" in ++ UUID=*) ++ dev=$(blkid -l -t UUID=${dev#UUID=} -o device) ++ ;; ++ LABEL=*) ++ dev=$(blkid -l -t LABEL=${dev#LABEL=} -o device) ++ ;; ++ PARTUUID=*) ++ dev=$(blkid -l -t PARTUUID=${dev#PARTUUID=} -o device) ++ ;; ++ PARTLABEL=*) ++ dev=$(blkid -l -t PARTLABEL=${dev#PARTLABEL=} -o device) ++ ;; ++ esac ++ [ -z "$dev" ] && dwarn "Bad fstab entry $@" && continue ++ push_host_devs "$dev" ++ host_fs_types["$dev"]="$3" + done + + for f in $add_fstab; do diff --git a/0056-dracut.usage.asc-Remove-distro-specific-help-from-ma.patch b/0056-dracut.usage.asc-Remove-distro-specific-help-from-ma.patch new file mode 100644 index 0000000..366c771 --- /dev/null +++ b/0056-dracut.usage.asc-Remove-distro-specific-help-from-ma.patch @@ -0,0 +1,47 @@ +From 4d25892179e4eff9fc4bd2a2ab45a91c5a372fc2 Mon Sep 17 00:00:00 2001 +From: Thomas Renninger +Date: Thu, 11 Dec 2014 15:46:17 +0100 +Subject: [PATCH] dracut.usage.asc: Remove distro specific help from manpage + +Signed-off-by: Thomas Renninger +--- + dracut.usage.asc | 19 +------------------ + 1 file changed, 1 insertion(+), 18 deletions(-) + +diff --git a/dracut.usage.asc b/dracut.usage.asc +index 9e788c1..b4a8663 100644 +--- a/dracut.usage.asc ++++ b/dracut.usage.asc +@@ -246,23 +246,6 @@ specified multiple times. + If your root partition is on a network drive, you have to have the network + dracut modules installed to create a network aware initramfs image. + +-On a Red Hat Enterprise Linux or Fedora system, this means, you have to install +-the _dracut-network_ rpm package: +- +- +----- +-# yum install dracut-network +----- +- +-The resulting initramfs image can be served by a boot manager residing on your +-local hard drive or it can be served by a PXE/TFTP server. +- +-How to setup your PXE/TFTP server can be found in the +-http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red +-Hat Enterprise Linux 6 Storage Administration Guide] +-or http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red +-Hat Enterprise Linux 7 Storage Administration Guide]. +- + If you specify ip=dhcp on the kernel command line, then dracut asks a dhcp + server about the ip adress for the machine. The dhcp server can also serve an + additional root-path, which will set the root device for dracut. With this +@@ -302,7 +285,7 @@ This will reduce the size of the initramfs image significantly. + If the boot process does not succeed, you have several options to debug the + situation. Some of the basic operations are covered here. For more information + you should also visit: +-http://fedoraproject.org/wiki/How_to_debug_Dracut_problems ++https://www.kernel.org/pub/linux/utils/boot/dracut/dracut.html + + + [[identifying-your-problem-area]] diff --git a/0057-nfs-Add-ip-.-and-root-nfs.-parameters-to-internal-dr.patch b/0057-nfs-Add-ip-.-and-root-nfs.-parameters-to-internal-dr.patch new file mode 100644 index 0000000..d62e9a9 --- /dev/null +++ b/0057-nfs-Add-ip-.-and-root-nfs.-parameters-to-internal-dr.patch @@ -0,0 +1,88 @@ +From 206345ce9b5eda660d82ce552620edc12db4b2e3 Mon Sep 17 00:00:00 2001 +From: Thomas Renninger +Date: Thu, 11 Dec 2014 15:46:18 +0100 +Subject: [PATCH] nfs: Add ip=... and root=nfs... parameters to internal dracut + + cmdline + +If the rootfs is an nfs mount, also know as nfsroot, add the correct +parameter to the dracut cmdline. + +Signed-off-by: Thomas Renninger +--- + modules.d/95nfs/module-setup.sh | 44 +++++++++++++++++++++++++++++++++++++++-- + 1 file changed, 42 insertions(+), 2 deletions(-) + +diff --git a/modules.d/95nfs/module-setup.sh b/modules.d/95nfs/module-setup.sh +index e1340b3..8eb542c 100755 +--- a/modules.d/95nfs/module-setup.sh ++++ b/modules.d/95nfs/module-setup.sh +@@ -14,7 +14,6 @@ check() { + done + return 255 + } +- + return 0 + } + +@@ -29,6 +28,43 @@ installkernel() { + instmods nfs sunrpc ipv6 nfsv2 nfsv3 nfsv4 nfs_acl nfs_layout_nfsv41_files + } + ++cmdline() { ++ local nfs_device ++ local nfs_options ++ local nfs_root ++ local nfs_address ++ local lookup ++ local ifname ++ ++ ### nfsroot= ### ++ nfs_device=$(findmnt -t nfs4 -n -o SOURCE /) ++ if [ -n "$nfs_device" ];then ++ nfs_root="root=nfs4:$nfs_device" ++ else ++ nfs_device=$(findmnt -t nfs -n -o SOURCE /) ++ [ -z "$nfs_device" ] && return ++ nfs_root="root=nfs:$nfs_device" ++ fi ++ nfs_options=$(findmnt -t nfs4,nfs -n -o OPTIONS /) ++ [ -n "$nfs_options" ] && nfs_root="$nfs_root:$nfs_options" ++ echo "$nfs_root" ++ ++ ### ip= ### ++ if [[ $nfs_device = [0-9]*\.[0-9]*\.[0-9]*.[0-9]* ]] || [[ $nfs_device = \[.*\] ]]; then ++ nfs_address="$nfs_device" ++ else ++ lookup=$(host $(echo ${nfs_device%%:*})| head -n1) ++ nfs_address=${lookup##* } ++ fi ++ ifname=$(ip -o route get to $nfs_address | sed -n 's/.*dev \([^ ]*\).*/\1/p') ++ if [ -e /sys/class/net/$ifname/address ] ; then ++ ifmac=$(cat /sys/class/net/$ifname/address) ++ printf 'ifname=%s:%s ' ${ifname} ${ifmac} ++ fi ++ ++ printf 'ip=%s:static\n' ${ifname} ++} ++ + # called by dracut + install() { + local _i +@@ -37,6 +73,11 @@ install() { + mount.nfs4 umount rpc.idmapd sed /etc/netconfig + inst_multiple /etc/services /etc/nsswitch.conf /etc/rpc /etc/protocols /etc/idmapd.conf + ++ if [[ $hostonly_cmdline == "yes" ]]; then ++ local _netconf="$(cmdline)" ++ [[ $_netconf ]] && printf "%s\n" "$_netconf" >> "${initdir}/etc/cmdline.d/95nfs.conf" ++ fi ++ + if [ -f /lib/modprobe.d/nfs.conf ]; then + inst_multiple /lib/modprobe.d/nfs.conf + else +@@ -75,4 +116,3 @@ install() { + && chown rpc.rpc "$initdir/var/lib/rpcbind" + dracut_need_initqueue + } +- diff --git a/0058-95iscsi-parse-output-from-iscsiadm-correctly.patch b/0058-95iscsi-parse-output-from-iscsiadm-correctly.patch new file mode 100644 index 0000000..10cd507 --- /dev/null +++ b/0058-95iscsi-parse-output-from-iscsiadm-correctly.patch @@ -0,0 +1,44 @@ +From cd72830807e231f8a88bd81c8f2df951c5a6d33e Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:19 +0100 +Subject: [PATCH] 95iscsi: parse output from iscsiadm correctly + +Due to some obsure reason the IFS parameter is not set correctly +when evaluating get_ibft_mod(). So change the parsing to not rely +on IFS altogether. + +References: bnc#886199 + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/95iscsi/module-setup.sh | 13 +++++++------ + 1 file changed, 7 insertions(+), 6 deletions(-) + +diff --git a/modules.d/95iscsi/module-setup.sh b/modules.d/95iscsi/module-setup.sh +index 9975e59..f13119f 100755 +--- a/modules.d/95iscsi/module-setup.sh ++++ b/modules.d/95iscsi/module-setup.sh +@@ -30,15 +30,16 @@ check() { + + get_ibft_mod() { + local ibft_mac=$1 ++ local iface_mac iface_mod + # Return the iSCSI offload module for a given MAC address +- iscsiadm -m iface | while read iface_name iface_desc ; do +- IFS=$',' +- set -- $iface_desc +- if [ "$ibft_mac" = "$2" ] ; then +- echo $1 ++ for iface_desc in $(iscsiadm -m iface | cut -f 2 -d ' '); do ++ iface_mod=${iface_desc%%,*} ++ iface_mac=${iface_desc#*,} ++ iface_mac=${iface_mac%%,*} ++ if [ "$ibft_mac" = "$iface_mac" ] ; then ++ echo $iface_mod + return 0 + fi +- unset IFS + done + } + diff --git a/0059-dracut-Do-not-stop-installing-drivers-if-one-fails.patch b/0059-dracut-Do-not-stop-installing-drivers-if-one-fails.patch new file mode 100644 index 0000000..e27687c --- /dev/null +++ b/0059-dracut-Do-not-stop-installing-drivers-if-one-fails.patch @@ -0,0 +1,45 @@ +From 8d40852e8cf5a4b5db38cbbb52c42b348d3c7502 Mon Sep 17 00:00:00 2001 +From: Thomas Renninger +Date: Thu, 11 Dec 2014 15:46:20 +0100 +Subject: [PATCH] dracut: Do not stop installing drivers if one fails + +--add-drivers and --filesystems kernel drivers are added via: +instmods -c +The check option makes the function return if one driver could not get +installed without trying to install further drivers which is bad. + +The user is still informed ($_silent is by default no), but all modules +passed to instmods are tried to be loaded, even if one fails. + +Signed-off-by: Thomas Renninger +--- + dracut-functions.sh | 10 ++++------ + 1 file changed, 4 insertions(+), 6 deletions(-) + +diff --git a/dracut-functions.sh b/dracut-functions.sh +index 7a12a76..b91d8dc 100755 +--- a/dracut-functions.sh ++++ b/dracut-functions.sh +@@ -1742,18 +1742,16 @@ instmods() { + if (($# == 0)); then # filenames from stdin + while read _mod; do + inst1mod "${_mod%.ko*}" || { +- if [[ "$_check" == "yes" ]]; then +- [[ "$_silent" == "no" ]] && dfatal "Failed to install module $_mod" +- return 1 ++ if [[ "$_check" == "yes" ]] && [[ "$_silent" == "no" ]]; then ++ dfatal "Failed to install module $_mod" + fi + } + done + fi + while (($# > 0)); do # filenames as arguments + inst1mod ${1%.ko*} || { +- if [[ "$_check" == "yes" ]]; then +- [[ "$_silent" == "no" ]] && dfatal "Failed to install module $1" +- return 1 ++ if [[ "$_check" == "yes" ]] && [[ "$_silent" == "no" ]]; then ++ dfatal "Failed to install module $1" + fi + } + shift diff --git a/0060-95fcoe-update-fcoe-interface-check.patch b/0060-95fcoe-update-fcoe-interface-check.patch new file mode 100644 index 0000000..0eebd7e --- /dev/null +++ b/0060-95fcoe-update-fcoe-interface-check.patch @@ -0,0 +1,36 @@ +From c64a94caa98749ceb4fad3c551d8e389f508d6df Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:21 +0100 +Subject: [PATCH] 95fcoe: update fcoe interface check + +The 'create' sysfs entry has been removed for newer fcoe modules, +so just check if the module directory exists. + +References: bnc#877288 + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/95fcoe/parse-fcoe.sh | 5 +---- + 1 file changed, 1 insertion(+), 4 deletions(-) + +diff --git a/modules.d/95fcoe/parse-fcoe.sh b/modules.d/95fcoe/parse-fcoe.sh +index 59de56f..9604503 100755 +--- a/modules.d/95fcoe/parse-fcoe.sh ++++ b/modules.d/95fcoe/parse-fcoe.sh +@@ -20,14 +20,11 @@ + + + # BRCM: Later, should check whether bnx2x is loaded first before loading bnx2fc so do not load bnx2fc when there are no Broadcom adapters +-[ -e /sys/module/fcoe/parameters/create ] || modprobe -a fcoe || die "FCoE requested but kernel/initrd does not support FCoE" ++[ -d /sys/module/fcoe ] || modprobe -a fcoe || die "FCoE requested but kernel/initrd does not support FCoE" + + modprobe bnx2fc >/dev/null 2>&1 + udevadm settle --timeout=30 + +-# FCoE actually supported? +-[ -e /sys/module/fcoe/parameters/create ] || modprobe fcoe || die "FCoE requested but kernel/initrd does not support FCoE" +- + parse_fcoe_opts() { + local IFS=: + set $fcoe diff --git a/0061-95fcoe-Store-current-configuration-in-dracut-cmdline.patch b/0061-95fcoe-Store-current-configuration-in-dracut-cmdline.patch new file mode 100644 index 0000000..49e1f9c --- /dev/null +++ b/0061-95fcoe-Store-current-configuration-in-dracut-cmdline.patch @@ -0,0 +1,94 @@ +From 8b257fcc86f9a470613c1a5719641144a688acf7 Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:22 +0100 +Subject: [PATCH] 95fcoe: Store current configuration in dracut cmdline + +When running with --hostonly-cmdline we should be storing +the current configuration in /etc/cmdline.d so that dracut +will be configure the system automatically. + +References: bnc#877288 + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/95fcoe/module-setup.sh | 52 ++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 52 insertions(+) + +diff --git a/modules.d/95fcoe/module-setup.sh b/modules.d/95fcoe/module-setup.sh +index b67aa04..174745a 100755 +--- a/modules.d/95fcoe/module-setup.sh ++++ b/modules.d/95fcoe/module-setup.sh +@@ -2,7 +2,16 @@ + + # called by dracut + check() { ++ [[ $hostonly ]] || [[ $mount_needs ]] && { ++ for c in /sys/bus/fcoe/devices/ctlr_* ; do ++ [ -L $c ] || continue ++ fcoe_ctlr=$c ++ done ++ [ -z "$fcoe_ctlr" ] && return 255 ++ } ++ + require_binaries dcbtool fipvlan lldpad ip readlink || return 1 ++ + return 0 + } + +@@ -17,12 +26,55 @@ installkernel() { + instmods fcoe 8021q edd + } + ++get_vlan_parent() { ++ local link=$1 ++ ++ [ -d $link ] || return ++ read iflink < $link/iflink ++ for if in /sys/class/net/* ; do ++ read idx < $if/ifindex ++ if [ $idx -eq $iflink ] ; then ++ echo ${if##*/} ++ fi ++ done ++} ++ ++# called by dracut ++cmdline() { ++ ++ for c in /sys/bus/fcoe/devices/ctlr_* ; do ++ [ -L $c ] || continue ++ read enabled < $c/enabled ++ [ $enabled -eq 0 ] && continue ++ d=$(cd -P $c; echo $PWD) ++ i=${d%/*} ++ read mac < ${i}/address ++ s=$(dcbtool gc ${i##*/} dcb | sed -n 's/^DCB State:\t*\(.*\)/\1/p') ++ if [ -z "$s" ] ; then ++ p=$(get_vlan_parent ${i}) ++ if [ "$p" ] ; then ++ s=$(dcbtool gc ${p} dcb | sed -n 's/^DCB State:\t*\(.*\)/\1/p') ++ fi ++ fi ++ if [ "$s" = "on" ] ; then ++ dcb="dcb" ++ else ++ dcb="nodcb" ++ fi ++ echo "fcoe=${mac}:${dcb}" ++ done ++} ++ + # called by dracut + install() { + inst_multiple ip dcbtool fipvlan lldpad readlink lldptool + + mkdir -m 0755 -p "$initdir/var/lib/lldpad" + ++ if [[ $hostonly_cmdline == "yes" ]] ; then ++ local _fcoeconf=$(cmdline) ++ [[ $_fcoeconf ]] && printf "%s\n" "$_fcoeconf" >> "${initdir}/etc/cmdline.d/95fcoe.conf" ++ fi + inst "$moddir/fcoe-up.sh" "/sbin/fcoe-up" + inst "$moddir/fcoe-edd.sh" "/sbin/fcoe-edd" + inst "$moddir/fcoe-genrules.sh" "/sbin/fcoe-genrules.sh" diff --git a/0062-95fcoe-skip-VLAN-devices-in-fcoe-up.patch b/0062-95fcoe-skip-VLAN-devices-in-fcoe-up.patch new file mode 100644 index 0000000..3343e3c --- /dev/null +++ b/0062-95fcoe-skip-VLAN-devices-in-fcoe-up.patch @@ -0,0 +1,36 @@ +From 0a68a26cffad7fc75e454b06206c0bbf297361b7 Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:23 +0100 +Subject: [PATCH] 95fcoe: skip VLAN devices in fcoe-up + +DCB & fipvlan can only be called on real devices, not VLAN +ones. So skip any VLAN devices which might been added to the +list of network interfaces. + +References: bnc#878583 + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/95fcoe/fcoe-up.sh | 8 ++++++++ + 1 file changed, 8 insertions(+) + +diff --git a/modules.d/95fcoe/fcoe-up.sh b/modules.d/95fcoe/fcoe-up.sh +index b9d0411..7f6eb1b 100755 +--- a/modules.d/95fcoe/fcoe-up.sh ++++ b/modules.d/95fcoe/fcoe-up.sh +@@ -16,6 +16,14 @@ type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh + netif=$1 + dcb=$2 + ++iflink=$(cat /sys/class/net/$netif/iflink) ++ifindex=$(cat /sys/class/net/$netif/ifindex) ++if [ "$iflink" != "$ifindex" ] ; then ++ # Skip VLAN devices ++ exit 0 ++fi ++ ++ip link set dev $netif up + linkup "$netif" + + netdriver=$(readlink -f /sys/class/net/$netif/device/driver) diff --git a/0063-95fcoe-start-lldpad-separately.patch b/0063-95fcoe-start-lldpad-separately.patch new file mode 100644 index 0000000..2f58c04 --- /dev/null +++ b/0063-95fcoe-start-lldpad-separately.patch @@ -0,0 +1,76 @@ +From 22e837b6458d5d17d1cb6a9b09b7515746d4e098 Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:24 +0100 +Subject: [PATCH] 95fcoe: start lldpad separately + +lldpad is a system-wide process, which must be started only once. +So we should be separate it from fcoe-up, as it might be called +several times. + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/95fcoe/fcoe-up.sh | 8 -------- + modules.d/95fcoe/lldpad.sh | 14 ++++++++++++++ + modules.d/95fcoe/module-setup.sh | 1 + + 3 files changed, 15 insertions(+), 8 deletions(-) + create mode 100644 modules.d/95fcoe/lldpad.sh + +diff --git a/modules.d/95fcoe/fcoe-up.sh b/modules.d/95fcoe/fcoe-up.sh +index 7f6eb1b..43a0ad5 100755 +--- a/modules.d/95fcoe/fcoe-up.sh ++++ b/modules.d/95fcoe/fcoe-up.sh +@@ -30,10 +30,6 @@ netdriver=$(readlink -f /sys/class/net/$netif/device/driver) + netdriver=${netdriver##*/} + + if [ "$dcb" = "dcb" ]; then +- # Note lldpad will stay running after switchroot, the system initscripts +- # are to kill it and start a new lldpad to take over. Data is transfered +- # between the 2 using a shm segment +- lldpad -d + # wait for lldpad to be ready + i=0 + while [ $i -lt 60 ]; do +@@ -43,10 +39,6 @@ if [ "$dcb" = "dcb" ]; then + i=$(($i+1)) + done + +- # on some systems lldpad needs some time +- # sleep until we find a better solution +- sleep 30 +- + while [ $i -lt 60 ]; do + dcbtool sc "$netif" dcb on && break + info "Retrying to turn dcb on" +diff --git a/modules.d/95fcoe/lldpad.sh b/modules.d/95fcoe/lldpad.sh +new file mode 100644 +index 0000000..d06a3bd +--- /dev/null ++++ b/modules.d/95fcoe/lldpad.sh +@@ -0,0 +1,14 @@ ++#!/bin/bash ++ ++# Note lldpad will stay running after switchroot, the system initscripts ++# are to kill it and start a new lldpad to take over. Data is transfered ++# between the 2 using a shm segment ++lldpad -d ++# wait for lldpad to be ready ++i=0 ++while [ $i -lt 60 ]; do ++ lldptool -p && break ++ info "Waiting for lldpad to be ready" ++ sleep 1 ++ i=$(($i+1)) ++done +diff --git a/modules.d/95fcoe/module-setup.sh b/modules.d/95fcoe/module-setup.sh +index 174745a..9c67f17 100755 +--- a/modules.d/95fcoe/module-setup.sh ++++ b/modules.d/95fcoe/module-setup.sh +@@ -78,6 +78,7 @@ install() { + inst "$moddir/fcoe-up.sh" "/sbin/fcoe-up" + inst "$moddir/fcoe-edd.sh" "/sbin/fcoe-edd" + inst "$moddir/fcoe-genrules.sh" "/sbin/fcoe-genrules.sh" ++ inst_hook pre-trigger 03 "$moddir/lldpad.sh" + inst_hook cmdline 99 "$moddir/parse-fcoe.sh" + dracut_need_initqueue + } diff --git a/0064-Enhance-suse.conf-and-debug-module-example-with-SUSE.patch b/0064-Enhance-suse.conf-and-debug-module-example-with-SUSE.patch new file mode 100644 index 0000000..c6b99b1 --- /dev/null +++ b/0064-Enhance-suse.conf-and-debug-module-example-with-SUSE.patch @@ -0,0 +1,61 @@ +From 94920084351349cba579ce80a89321ab6544653c Mon Sep 17 00:00:00 2001 +From: Thomas Renninger +Date: Thu, 11 Dec 2014 15:46:25 +0100 +Subject: [PATCH] Enhance suse.conf and debug module example with SUSE-specific + settings + +SUSE is using specific settings for dracut, so add them +to the suse.conf.example file. + +Add vi and find to the debug module add some help text to the suse.conf +file when and how to use it. + +Signed-off-by: Thomas Renninger +--- + dracut.conf.d/suse.conf.example | 21 +++++++++++++++++++++ + modules.d/95debug/module-setup.sh | 3 +-- + 2 files changed, 22 insertions(+), 2 deletions(-) + +diff --git a/dracut.conf.d/suse.conf.example b/dracut.conf.d/suse.conf.example +index 1e7f80e..37ffd72 100644 +--- a/dracut.conf.d/suse.conf.example ++++ b/dracut.conf.d/suse.conf.example +@@ -1,3 +1,24 @@ ++# SUSE specifc dracut settings ++# ++# SUSE by default always builds a as small as possible initrd for performance ++# and resource reasons. ++# If you like to build a generic initrd which works on other platforms than ++# on the one dracut/mkinitrd got called comment out below setting(s). ++hostonly="yes" ++hostonly_cmdline="yes" ++ ++compress="xz -0 --check=crc32 --memlimit-compress=50%" ++ + i18n_vars="/etc/sysconfig/language:RC_LANG-LANG,RC_LC_ALL-LC_ALL /etc/sysconfig/console:CONSOLE_UNICODEMAP-FONT_UNIMAP,CONSOLE_FONT-FONT,CONSOLE_SCREENMAP-FONT_MAP /etc/sysconfig/keyboard:KEYTABLE-KEYMAP" + omit_drivers+=" i2o_scsi" + ++# Below adds additional tools to the initrd which are not urgently necessary to ++# bring up the system, but help to debug problems. ++# See /usr/lib/dracut/modules.d/95debug/module-setup.sh which additional tools ++# are installed and add more if you need them. This specifically helps if you ++# use: ++# rd.break=[cmdline|pre-udev|pre-trigger|initqueue|pre-mount| ++# mount|pre-pivot|cleanup] ++# boot parameter or if you are forced to enter the dracut emergency shell. ++ ++# add_dracutmodules+=debug +diff --git a/modules.d/95debug/module-setup.sh b/modules.d/95debug/module-setup.sh +index 625f7fb..5a9aaac 100755 +--- a/modules.d/95debug/module-setup.sh ++++ b/modules.d/95debug/module-setup.sh +@@ -14,8 +14,7 @@ depends() { + # called by dracut + install() { + inst_multiple -o ps grep more cat rm strace free showmount \ +- ping netstat rpcinfo vi scp ping6 ssh \ ++ ping netstat rpcinfo vi scp ping6 ssh find vi \ + fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.vfat e2fsck +- + } + diff --git a/0065-40network-add-missing-_arch-variable-declaration.patch b/0065-40network-add-missing-_arch-variable-declaration.patch new file mode 100644 index 0000000..c2b9bc3 --- /dev/null +++ b/0065-40network-add-missing-_arch-variable-declaration.patch @@ -0,0 +1,25 @@ +From 681462eca8bd87383c9cb8c0bc34ebad827c4421 Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:26 +0100 +Subject: [PATCH] 40network: add missing _arch variable declaration + +The module_setup.sh script was missing an '_arch' declaration, +causing network not to be installed on s390. + +Signed-off-by: Thomas Renninger +--- + modules.d/40network/module-setup.sh | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/modules.d/40network/module-setup.sh b/modules.d/40network/module-setup.sh +index 55bee4c..f7e0a87 100755 +--- a/modules.d/40network/module-setup.sh ++++ b/modules.d/40network/module-setup.sh +@@ -17,6 +17,7 @@ depends() { + # called by dracut + installkernel() { + # Include wired net drivers, excluding wireless ++ local _arch=$(uname -m) + + net_module_filter() { + local _net_drivers='eth_type_trans|register_virtio_device|usbnet_open' diff --git a/0066-99base-Add-chown-binary.patch b/0066-99base-Add-chown-binary.patch new file mode 100644 index 0000000..ced65d0 --- /dev/null +++ b/0066-99base-Add-chown-binary.patch @@ -0,0 +1,29 @@ +From a262ad91e82729b661049f24a5d5968d08ce161c Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:27 +0100 +Subject: [PATCH] 99base: Add chown binary + +nvidia driver needs this via modprobe script. +Needs to do change the group after a device node got created. +Add chown instead of chgrp which can also change the owner of a file. + +Ask Stefand Dirsch for details. + +Signed-off-by: Thomas Renninger +--- + modules.d/99base/module-setup.sh | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/modules.d/99base/module-setup.sh b/modules.d/99base/module-setup.sh +index 7d30320..a1046af 100755 +--- a/modules.d/99base/module-setup.sh ++++ b/modules.d/99base/module-setup.sh +@@ -15,7 +15,7 @@ depends() { + install() { + local _d + +- inst_multiple mount mknod mkdir sleep chroot \ ++ inst_multiple mount mknod mkdir sleep chroot chown \ + sed ls flock cp mv dmesg rm ln rmmod mkfifo umount readlink setsid + inst $(command -v modprobe) /sbin/modprobe + diff --git a/0067-90kernel-modules-install-scsi_dh_alua.patch b/0067-90kernel-modules-install-scsi_dh_alua.patch new file mode 100644 index 0000000..c479ca2 --- /dev/null +++ b/0067-90kernel-modules-install-scsi_dh_alua.patch @@ -0,0 +1,28 @@ +From ce8f354dbd5a54be247ee8a96aa14b555503f3b6 Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:28 +0100 +Subject: [PATCH] 90kernel-modules: install scsi_dh_alua + +Install the missing scsi_dh_alua module, too. + +References: bnc#871617 + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + modules.d/90kernel-modules/module-setup.sh | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/modules.d/90kernel-modules/module-setup.sh b/modules.d/90kernel-modules/module-setup.sh +index 2fa263c..1a8fcff 100755 +--- a/modules.d/90kernel-modules/module-setup.sh ++++ b/modules.d/90kernel-modules/module-setup.sh +@@ -41,7 +41,7 @@ installkernel() { + uhci-hcd \ + xhci-hcd + +- instmods yenta_socket scsi_dh_rdac scsi_dh_emc \ ++ instmods yenta_socket scsi_dh_rdac scsi_dh_emc scsi_dh_alua \ + atkbd i8042 usbhid hid-apple hid-sunplus hid-cherry hid-logitech \ + hid-logitech-dj hid-microsoft hid-lcpower firewire-ohci \ + pcmcia hid-hyperv hv-vmbus hyperv-keyboard diff --git a/0068-Fix-non-export-of-journal-dev-boot-options.patch b/0068-Fix-non-export-of-journal-dev-boot-options.patch new file mode 100644 index 0000000..d553c47 --- /dev/null +++ b/0068-Fix-non-export-of-journal-dev-boot-options.patch @@ -0,0 +1,30 @@ +From 486030575d3573237e776a630b3df0139c11fab3 Mon Sep 17 00:00:00 2001 +From: Thorsten Behrens +Date: Thu, 11 Dec 2014 15:46:29 +0100 +Subject: [PATCH] Fix non-export of journal dev boot options. + +cmdline_journal does not contain linefeeds anymore, so read +silently skipped it altogether. + +Signed-off-by: Thorsten Behrens +Signed-off-by: Thomas Renninger +--- + modules.d/95rootfs-block/module-setup.sh | 5 ++--- + 1 file changed, 2 insertions(+), 3 deletions(-) + +diff --git a/modules.d/95rootfs-block/module-setup.sh b/modules.d/95rootfs-block/module-setup.sh +index 258b32f..c2f71bb 100755 +--- a/modules.d/95rootfs-block/module-setup.sh ++++ b/modules.d/95rootfs-block/module-setup.sh +@@ -43,9 +43,8 @@ cmdline() { + # called by dracut + install() { + if [[ $hostonly_cmdline == "yes" ]]; then +- cmdline_journal | while read journaldev; do +- [[ $journaldev ]] && printf "%s\n" "$journaldev" >> "${initdir}/etc/cmdline.d/95root-journaldev.conf" +- done ++ local _journaldev=$(cmdline_journal) ++ [[ $_journaldev ]] && printf "%s\n" "$_journaldev" >> "${initdir}/etc/cmdline.d/95root-journaldev.conf" + fi + + inst_multiple umount diff --git a/0069-Also-export-root-boot-param-for-hostonly-cmdline-cas.patch b/0069-Also-export-root-boot-param-for-hostonly-cmdline-cas.patch new file mode 100644 index 0000000..76b1753 --- /dev/null +++ b/0069-Also-export-root-boot-param-for-hostonly-cmdline-cas.patch @@ -0,0 +1,48 @@ +From 7700b3df4c753112d9a38745388b1e1fd54ce5c5 Mon Sep 17 00:00:00 2001 +From: Thorsten Behrens +Date: Thu, 11 Dec 2014 15:46:30 +0100 +Subject: [PATCH] Also export root= boot param for hostonly-cmdline case. + +If there's a root fallback, at least attempt to have it falling +back to the last root filesystem this system ran off of. + +Signed-off-by: Thorsten Behrens +Signed-off-by: Thomas Renninger +--- + modules.d/95rootfs-block/module-setup.sh | 10 ++++++++-- + 1 file changed, 8 insertions(+), 2 deletions(-) + +diff --git a/modules.d/95rootfs-block/module-setup.sh b/modules.d/95rootfs-block/module-setup.sh +index c2f71bb..81de177 100755 +--- a/modules.d/95rootfs-block/module-setup.sh ++++ b/modules.d/95rootfs-block/module-setup.sh +@@ -29,14 +29,18 @@ cmdline_journal() { + return 0 + } + +-# called by dracut +-cmdline() { ++cmdline_rootfs() { + local dev=/dev/block/$(find_root_block_device) + if [ -e $dev ]; then + printf " root=%s" "$(shorten_persistent_dev "$(get_persistent_dev "$dev")")" + printf " rootflags=%s" "$(find_mp_fsopts /)" + printf " rootfstype=%s" "$(find_mp_fstype /)" + fi ++} ++ ++# called by dracut ++cmdline() { ++ cmdline_rootfs + cmdline_journal + } + +@@ -45,6 +49,8 @@ install() { + if [[ $hostonly_cmdline == "yes" ]]; then + local _journaldev=$(cmdline_journal) + [[ $_journaldev ]] && printf "%s\n" "$_journaldev" >> "${initdir}/etc/cmdline.d/95root-journaldev.conf" ++ local _rootdev=$(cmdline_rootfs) ++ [[ $_rootdev ]] && printf "%s\n" "$_rootdev" >> "${initdir}/etc/cmdline.d/95root-dev.conf" + fi + + inst_multiple umount diff --git a/0070-Don-t-create-lots-of-empty-cmdline-files-for-hostonl.patch b/0070-Don-t-create-lots-of-empty-cmdline-files-for-hostonl.patch new file mode 100644 index 0000000..c6c7398 --- /dev/null +++ b/0070-Don-t-create-lots-of-empty-cmdline-files-for-hostonl.patch @@ -0,0 +1,94 @@ +From fe116c1670c622fa117a7765abb17c976cc48333 Mon Sep 17 00:00:00 2001 +From: Thorsten Behrens +Date: Thu, 11 Dec 2014 15:46:31 +0100 +Subject: [PATCH] Don't create lots of empty cmdline files for hostonly-cmdline + case + +This aligns other places piping cmdline() output to cmdline.d files +with the earlier fix for 95rootfs-block. + +Signed-off-by: Thorsten Behrens +Signed-off-by: Thomas Renninger +--- + modules.d/90crypt/module-setup.sh | 4 ++-- + modules.d/90dmraid/module-setup.sh | 4 ++-- + modules.d/90lvm/module-setup.sh | 4 ++-- + modules.d/90mdraid/module-setup.sh | 4 ++-- + modules.d/95resume/module-setup.sh | 4 ++-- + 5 files changed, 10 insertions(+), 10 deletions(-) + +diff --git a/modules.d/90crypt/module-setup.sh b/modules.d/90crypt/module-setup.sh +index 37ae859..ea1e340 100755 +--- a/modules.d/90crypt/module-setup.sh ++++ b/modules.d/90crypt/module-setup.sh +@@ -50,8 +50,8 @@ cmdline() { + install() { + + if [[ $hostonly_cmdline == "yes" ]]; then +- cmdline >> "${initdir}/etc/cmdline.d/90crypt.conf" +- echo >> "${initdir}/etc/cmdline.d/90crypt.conf" ++ local _cryptconf=$(cmdline) ++ [[ $_cryptconf ]] && printf "%s\n" "$_cryptconf" >> "${initdir}/etc/cmdline.d/90crypt.conf" + fi + + inst_multiple cryptsetup rmdir readlink umount +diff --git a/modules.d/90dmraid/module-setup.sh b/modules.d/90dmraid/module-setup.sh +index 508598b..044e01f 100755 +--- a/modules.d/90dmraid/module-setup.sh ++++ b/modules.d/90dmraid/module-setup.sh +@@ -64,8 +64,8 @@ install() { + local _i + + if [[ $hostonly_cmdline == "yes" ]]; then +- cmdline >> "${initdir}/etc/cmdline.d/90dmraid.conf" +- echo >> "${initdir}/etc/cmdline.d/90dmraid.conf" ++ local _raidconf=$(cmdline) ++ [[ $_raidconf ]] && printf "%s\n" "$_raidconf" >> "${initdir}/etc/cmdline.d/90dmraid.conf" + fi + + inst_multiple dmraid +diff --git a/modules.d/90lvm/module-setup.sh b/modules.d/90lvm/module-setup.sh +index 5515ac0..592a2e2 100755 +--- a/modules.d/90lvm/module-setup.sh ++++ b/modules.d/90lvm/module-setup.sh +@@ -53,8 +53,8 @@ install() { + inst lvm + + if [[ $hostonly_cmdline == "yes" ]]; then +- cmdline >> "${initdir}/etc/cmdline.d/90lvm.conf" +- echo >> "${initdir}/etc/cmdline.d/90lvm.conf" ++ local _lvmconf=$(cmdline) ++ [[ $_lvmconf ]] && printf "%s\n" "$_lvmconf" >> "${initdir}/etc/cmdline.d/90lvm.conf" + fi + + inst_rules "$moddir/64-lvm.rules" +diff --git a/modules.d/90mdraid/module-setup.sh b/modules.d/90mdraid/module-setup.sh +index ce3394a..747ea8a 100755 +--- a/modules.d/90mdraid/module-setup.sh ++++ b/modules.d/90mdraid/module-setup.sh +@@ -71,8 +71,8 @@ install() { + inst $(command -v mdadm) /sbin/mdadm + + if [[ $hostonly_cmdline == "yes" ]]; then +- cmdline >> "${initdir}/etc/cmdline.d/90mdraid.conf" +- echo >> "${initdir}/etc/cmdline.d/90mdraid.conf" ++ local _raidconf=$(cmdline) ++ [[ $_raidconf ]] && printf "%s\n" "$_raidconf" >> "${initdir}/etc/cmdline.d/90mdraid.conf" + fi + + # > "${initdir}/etc/cmdline.d/95resume.conf" +- echo >> "${initdir}/etc/cmdline.d/95resume.conf" ++ local _resumeconf=$(cmdline) ++ [[ $_resumeconf ]] && printf "%s\n" "$_resumeconf" >> "${initdir}/etc/cmdline.d/95resume.conf" + fi + + # Optional uswsusp support diff --git a/0071-95rootfs-block-Correctly-terminate-commandline-param.patch b/0071-95rootfs-block-Correctly-terminate-commandline-param.patch new file mode 100644 index 0000000..bf3006d --- /dev/null +++ b/0071-95rootfs-block-Correctly-terminate-commandline-param.patch @@ -0,0 +1,59 @@ +From 4b6b46bb2aa9e6a72f96501888035f2d38b82266 Mon Sep 17 00:00:00 2001 +From: Hannes Reinecke +Date: Thu, 11 Dec 2014 15:46:32 +0100 +Subject: [PATCH] 95rootfs-block: Correctly terminate commandline parameter + +95rootfs-block would not terminate the commandline parameter with +a space or newline, instead it'll rely on the main routine from +dracut.sh to do this. +Which will cause unexpected problems for any modules called +after this. + +So terminate the commandline parameters correctly here and remove +the newline from dracut.sh. + +Signed-off-by: Hannes Reinecke +Signed-off-by: Thomas Renninger +--- + dracut.sh | 1 - + modules.d/95rootfs-block/module-setup.sh | 8 ++++---- + 2 files changed, 4 insertions(+), 5 deletions(-) + +diff --git a/dracut.sh b/dracut.sh +index 2eba19b..f384d2d 100755 +--- a/dracut.sh ++++ b/dracut.sh +@@ -1299,7 +1299,6 @@ if [[ $print_cmdline ]]; then + module_cmdline "$_d_mod" + done + unset moddir +- printf "\n" + exit 0 + fi + +diff --git a/modules.d/95rootfs-block/module-setup.sh b/modules.d/95rootfs-block/module-setup.sh +index 81de177..33875f8 100755 +--- a/modules.d/95rootfs-block/module-setup.sh ++++ b/modules.d/95rootfs-block/module-setup.sh +@@ -22,7 +22,7 @@ cmdline_journal() { + fi + + if [ -n "$journaldev" ]; then +- printf " root.journaldev=%s" "$journaldev" ++ echo "root.journaldev=${journaldev}" + fi + done + fi +@@ -32,9 +32,9 @@ cmdline_journal() { + cmdline_rootfs() { + local dev=/dev/block/$(find_root_block_device) + if [ -e $dev ]; then +- printf " root=%s" "$(shorten_persistent_dev "$(get_persistent_dev "$dev")")" +- printf " rootflags=%s" "$(find_mp_fsopts /)" +- printf " rootfstype=%s" "$(find_mp_fstype /)" ++ printf "root=%s" "$(shorten_persistent_dev "$(get_persistent_dev "$dev")")" ++ printf "rootflags=%s" "$(find_mp_fsopts /)" ++ printf "rootfstype=%s\n" "$(find_mp_fstype /)" + fi + } + diff --git a/0072-dracut-nbd-Only-complain-of-missing-binary-in-hoston.patch b/0072-dracut-nbd-Only-complain-of-missing-binary-in-hoston.patch new file mode 100644 index 0000000..55201f1 --- /dev/null +++ b/0072-dracut-nbd-Only-complain-of-missing-binary-in-hoston.patch @@ -0,0 +1,39 @@ +From e683985d103f1b0f15a9ccd9678169f4fb7aeb5f Mon Sep 17 00:00:00 2001 +From: Thomas Renninger +Date: Thu, 11 Dec 2014 15:46:33 +0100 +Subject: [PATCH] dracut: nbd: Only complain of missing binary in hostonly mode + if + + rootfs is on nbd + +In not hostonly mode, require_binaries will still complain. +If in hostonly mode and the module is explicitly added via -a nbd, then +install() section will still complain later: +dracut-install: ERROR: installing 'nbd-client' + +Signed-off-by: Thomas Renninger +--- + modules.d/95nbd/module-setup.sh | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +diff --git a/modules.d/95nbd/module-setup.sh b/modules.d/95nbd/module-setup.sh +index 4f9e350..3cb6f49 100755 +--- a/modules.d/95nbd/module-setup.sh ++++ b/modules.d/95nbd/module-setup.sh +@@ -3,8 +3,6 @@ + # called by dracut + check() { + local _rootdev +- # If our prerequisites are not met, fail. +- require_binaries nbd-client || return 1 + + # if an nbd device is not somewhere in the chain of devices root is + # mounted on, fail the hostonly check. +@@ -15,6 +13,7 @@ check() { + [[ -b /dev/block/$_rootdev ]] || return 1 + check_block_and_slaves is_nbd "$_rootdev" || return 255 + } ++ require_binaries nbd-client || return 1 + + return 0 + } diff --git a/0073-dracut-functions.sh-for-module-handling-strip-all-.k.patch b/0073-dracut-functions.sh-for-module-handling-strip-all-.k.patch new file mode 100644 index 0000000..02f7dce --- /dev/null +++ b/0073-dracut-functions.sh-for-module-handling-strip-all-.k.patch @@ -0,0 +1,72 @@ +From bea41b898a93e4437640817964861bbb694b01e6 Mon Sep 17 00:00:00 2001 +From: Harald Hoyer +Date: Wed, 17 Dec 2014 11:22:46 +0100 +Subject: [PATCH] dracut-functions.sh: for module handling, strip all ".ko*" + +Just strip anything after ".ko" including ".ko", otherwise compressed +modules are not stripped, if they end on e.g. ".ko.gz" +--- + dracut-functions.sh | 16 ++++++++-------- + 1 file changed, 8 insertions(+), 8 deletions(-) + +diff --git a/dracut-functions.sh b/dracut-functions.sh +index b91d8dc..410960d 100755 +--- a/dracut-functions.sh ++++ b/dracut-functions.sh +@@ -1461,7 +1461,7 @@ install_kmod_with_fw() { + + if [[ $omit_drivers ]]; then + local _kmod=${1##*/} +- _kmod=${_kmod%.ko} ++ _kmod=${_kmod%.ko*} + _kmod=${_kmod/-/_} + if [[ "$_kmod" =~ $omit_drivers ]]; then + dinfo "Omitting driver $_kmod" +@@ -1475,7 +1475,7 @@ install_kmod_with_fw() { + + if [[ $silent_omit_drivers ]]; then + local _kmod=${1##*/} +- _kmod=${_kmod%.ko} ++ _kmod=${_kmod%.ko*} + _kmod=${_kmod/-/_} + [[ "$_kmod" =~ $silent_omit_drivers ]] && return 0 + [[ "${1##*/lib/modules/$kernel/}" =~ $silent_omit_drivers ]] && return 0 +@@ -1599,7 +1599,7 @@ module_is_host_only() { + local _mod=$1 + local _modenc a i _k _s _v _aliases + _mod=${_mod##*/} +- _mod=${_mod%.ko} ++ _mod=${_mod%.ko*} + _modenc=${_mod//-/_} + + [[ " $add_drivers " == *\ ${_mod}\ * ]] && return 0 +@@ -1691,16 +1691,16 @@ instmods() { + _mod=${_mod##*/} + # Check for aliased modules + _modalias=$(modinfo -k $kernel -F filename $_mod 2> /dev/null) +- _modalias=${_modalias%.ko} +- if [ "${_modalias##*/}" != "$_mod" ] ; then ++ _modalias=${_modalias%.ko*} ++ if [[ $_modalias ]] && [ "${_modalias##*/}" != "${_mod%.ko*}" ] ; then + _mod=${_modalias##*/} + fi + + # if we are already installed, skip this module and go on + # to the next one. + if [[ $DRACUT_KERNEL_LAZY_HASHDIR ]] && \ +- [[ -f "$DRACUT_KERNEL_LAZY_HASHDIR/${_mod%.ko}.ko" ]]; then +- read _ret <"$DRACUT_KERNEL_LAZY_HASHDIR/${_mod%.ko}.ko" ++ [[ -f "$DRACUT_KERNEL_LAZY_HASHDIR/${_mod%.ko*}" ]]; then ++ read _ret <"$DRACUT_KERNEL_LAZY_HASHDIR/${_mod%.ko*}" + return $_ret + fi + +@@ -1730,7 +1730,7 @@ instmods() { + ((_ret+=$?)) + else + [[ $DRACUT_KERNEL_LAZY_HASHDIR ]] && \ +- echo $_mod >> "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist" ++ echo ${_mod%.ko*} >> "$DRACUT_KERNEL_LAZY_HASHDIR/lazylist" + fi + ;; + esac diff --git a/0074-Revert-95rootfs-block-Correctly-terminate-commandlin.patch b/0074-Revert-95rootfs-block-Correctly-terminate-commandlin.patch new file mode 100644 index 0000000..4439846 --- /dev/null +++ b/0074-Revert-95rootfs-block-Correctly-terminate-commandlin.patch @@ -0,0 +1,72 @@ +From a17d5cf4941addd0a7e94129062520fd64585a7d Mon Sep 17 00:00:00 2001 +From: Harald Hoyer +Date: Wed, 17 Dec 2014 11:44:18 +0100 +Subject: [PATCH] Revert "95rootfs-block: Correctly terminate commandline + parameter" +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This reverts commit 4b6b46bb2aa9e6a72f96501888035f2d38b82266. + +$ ./dracut.sh -l --print-cmdline +root=UUID=d5e53483-30bc-4119-8c0c-841d47a2f76brootflags=rw,noatime,compress=lzo,ssd,discard,space_cache,autodefrag,inode_cacherootfstype=btrfs + +instead of: + +$ ./dracut.sh -l --print-cmdline + root=UUID=d5e53483-30bc-4119-8c0c-841d47a2f76b +rootflags=rw,noatime,compress=lzo,ssd,discard,space_cache,autodefrag,inode_cache +rootfstype=btrfs + +and also + +$ make testimage +… + *** Store current command line parameters *** +Stored kernel commandline: +root=UUID=d5e53483-30bc-4119-8c0c-841d47a2f76brootflags=rw,noatime,compress=lzo,ssd,discard,space_cache,autodefrag,inode_cacherootfstype=btrfs +… +--- + dracut.sh | 1 + + modules.d/95rootfs-block/module-setup.sh | 8 ++++---- + 2 files changed, 5 insertions(+), 4 deletions(-) + +diff --git a/dracut.sh b/dracut.sh +index f384d2d..2eba19b 100755 +--- a/dracut.sh ++++ b/dracut.sh +@@ -1299,6 +1299,7 @@ if [[ $print_cmdline ]]; then + module_cmdline "$_d_mod" + done + unset moddir ++ printf "\n" + exit 0 + fi + +diff --git a/modules.d/95rootfs-block/module-setup.sh b/modules.d/95rootfs-block/module-setup.sh +index 33875f8..81de177 100755 +--- a/modules.d/95rootfs-block/module-setup.sh ++++ b/modules.d/95rootfs-block/module-setup.sh +@@ -22,7 +22,7 @@ cmdline_journal() { + fi + + if [ -n "$journaldev" ]; then +- echo "root.journaldev=${journaldev}" ++ printf " root.journaldev=%s" "$journaldev" + fi + done + fi +@@ -32,9 +32,9 @@ cmdline_journal() { + cmdline_rootfs() { + local dev=/dev/block/$(find_root_block_device) + if [ -e $dev ]; then +- printf "root=%s" "$(shorten_persistent_dev "$(get_persistent_dev "$dev")")" +- printf "rootflags=%s" "$(find_mp_fsopts /)" +- printf "rootfstype=%s\n" "$(find_mp_fstype /)" ++ printf " root=%s" "$(shorten_persistent_dev "$(get_persistent_dev "$dev")")" ++ printf " rootflags=%s" "$(find_mp_fsopts /)" ++ printf " rootfstype=%s" "$(find_mp_fstype /)" + fi + } + diff --git a/0075-resume-make-use-of-systemd-hibernate-resume-if-exist.patch b/0075-resume-make-use-of-systemd-hibernate-resume-if-exist.patch new file mode 100644 index 0000000..03ddcb0 --- /dev/null +++ b/0075-resume-make-use-of-systemd-hibernate-resume-if-exist.patch @@ -0,0 +1,31 @@ +From 733c71ce9e2d161c9e04772aeb1c5fb38e3fcb3a Mon Sep 17 00:00:00 2001 +From: Harald Hoyer +Date: Wed, 17 Dec 2014 12:08:37 +0100 +Subject: [PATCH] resume: make use of systemd-hibernate-resume, if existant + +In systemd mode, and if systemd-hibernate-resume exists, use it +exclusively. +--- + modules.d/95resume/module-setup.sh | 9 +++++++++ + 1 file changed, 9 insertions(+) + +diff --git a/modules.d/95resume/module-setup.sh b/modules.d/95resume/module-setup.sh +index dfd4350..7fe6df3 100755 +--- a/modules.d/95resume/module-setup.sh ++++ b/modules.d/95resume/module-setup.sh +@@ -33,6 +33,15 @@ install() { + [[ $_resumeconf ]] && printf "%s\n" "$_resumeconf" >> "${initdir}/etc/cmdline.d/95resume.conf" + fi + ++ # if systemd is included and has the hibernate-resume tool, use it and nothing else ++ if dracut_module_included "systemd" && [[ -x $systemdutildir/systemd-hibernate-resume ]]; then ++ inst_multiple -o \ ++ $systemdutildir/system-generators/systemd-hibernate-resume-generator \ ++ $systemdsystemunitdir/systemd-hibernate-resume@.service \ ++ $systemdutildir/systemd-hibernate-resume ++ return 0 ++ fi ++ + # Optional uswsusp support + for _bin in /usr/sbin/resume /usr/lib/suspend/resume /usr/lib/uswsusp/resume + do diff --git a/0076-systemd-add-systemd-journald-audit.socket.patch b/0076-systemd-add-systemd-journald-audit.socket.patch new file mode 100644 index 0000000..6363ba9 --- /dev/null +++ b/0076-systemd-add-systemd-journald-audit.socket.patch @@ -0,0 +1,29 @@ +From 3e7a05f2a5f051a97ac08885f5288bc310c367c2 Mon Sep 17 00:00:00 2001 +From: Harald Hoyer +Date: Fri, 19 Dec 2014 12:47:49 +0100 +Subject: [PATCH] systemd: add systemd-journald-audit.socket + +--- + modules.d/98systemd/module-setup.sh | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/modules.d/98systemd/module-setup.sh b/modules.d/98systemd/module-setup.sh +index 53e07a2..51ea288 100755 +--- a/modules.d/98systemd/module-setup.sh ++++ b/modules.d/98systemd/module-setup.sh +@@ -83,6 +83,7 @@ install() { + $systemdsystemunitdir/systemd-udevd-kernel.socket \ + $systemdsystemunitdir/systemd-ask-password-plymouth.path \ + $systemdsystemunitdir/systemd-journald.socket \ ++ $systemdsystemunitdir/systemd-journald-audit.socket \ + $systemdsystemunitdir/systemd-ask-password-console.service \ + $systemdsystemunitdir/systemd-modules-load.service \ + $systemdsystemunitdir/systemd-halt.service \ +@@ -105,6 +106,7 @@ install() { + $systemdsystemunitdir/sockets.target.wants/systemd-udevd-control.socket \ + $systemdsystemunitdir/sockets.target.wants/systemd-udevd-kernel.socket \ + $systemdsystemunitdir/sockets.target.wants/systemd-journald.socket \ ++ $systemdsystemunitdir/sockets.target.wants/systemd-journald-audit.socket \ + $systemdsystemunitdir/sockets.target.wants/systemd-journald-dev-log.socket \ + $systemdsystemunitdir/sysinit.target.wants/systemd-udevd.service \ + $systemdsystemunitdir/sysinit.target.wants/systemd-udev-trigger.service \ diff --git a/0077-dracut-Don-t-fail-at-copying-files-when-including-di.patch b/0077-dracut-Don-t-fail-at-copying-files-when-including-di.patch new file mode 100644 index 0000000..3235546 --- /dev/null +++ b/0077-dracut-Don-t-fail-at-copying-files-when-including-di.patch @@ -0,0 +1,46 @@ +From 332ecaa900a5af83ffae64f3e103270e49de88de Mon Sep 17 00:00:00 2001 +From: Erwan Velu +Date: Wed, 17 Dec 2014 17:04:19 +0100 +Subject: [PATCH] dracut: Don't fail at copying files when including + directories + +When including a directory, the files were considered in the directory +name which lead to messages like : + +cp: failed to access '/var/tmp/initramfs.L9s2zO///init-func': No such file or directory + +This patch does make the destdir more explicit and copy files into the +destination directory instead of destdir/filename/ +--- + dracut.sh | 7 ++++--- + 1 file changed, 4 insertions(+), 3 deletions(-) + +diff --git a/dracut.sh b/dracut.sh +index 2eba19b..07e4965 100755 +--- a/dracut.sh ++++ b/dracut.sh +@@ -1493,12 +1493,13 @@ while pop include_src src && pop include_target tgt; do + inst $src $tgt + else + ddebug "Including directory: $src" +- mkdir -p "${initdir}/${tgt}" ++ destdir="${initdir}/${tgt}" ++ mkdir -p "$destdir" + # check for preexisting symlinks, so we can cope with the + # symlinks to $prefix + for i in "$src"/*; do + [[ -e "$i" || -h "$i" ]] || continue +- s=${initdir}/${tgt}/${i#$src/} ++ s=${destdir}/${i#$src/} + if [[ -d "$i" ]]; then + if ! [[ -e "$s" ]]; then + mkdir -m 0755 -p "$s" +@@ -1506,7 +1507,7 @@ while pop include_src src && pop include_target tgt; do + fi + cp --reflink=auto --sparse=auto -fa -t "$s" "$i"/* + else +- cp --reflink=auto --sparse=auto -fa -t "$s" "$i" ++ cp --reflink=auto --sparse=auto -fa -t "$destdir" "$i" + fi + done + fi diff --git a/dracut.spec b/dracut.spec index f4b4ac6..5616cb2 100644 --- a/dracut.spec +++ b/dracut.spec @@ -11,7 +11,7 @@ Name: dracut Version: 040 -Release: 30.git20141208%{?dist} +Release: 78.git20141219%{?dist} Summary: Initramfs generator using udev %if 0%{?fedora} || 0%{?rhel} @@ -59,6 +59,54 @@ Patch26: 0026-40network-Fix-the-syntax-to-correct-the-judgment-sen.patch Patch27: 0027-initrd-release-move-from-etc-to-usr-lib.patch Patch28: 0028-dracut.conf.d-fedora.conf.example-turn-on-early_micr.patch Patch29: 0029-Fixed-the-dracut-shutdown.service.patch +Patch30: 0030-dmsquash-live-setup-the-images-in-run-initramfs.patch +Patch31: 0031-mkinitrd-suse-Update-to-sles12-SUSE-state.patch +Patch32: 0032-systemd-always-tries-to-load-autofs4.patch +Patch33: 0033-Fixup-mdraid-setup.patch +Patch34: 0034-95udev-rules-Include-correct-sg3_utils-rules.patch +Patch35: 0035-90multipath-install-correct-multipath-rules.patch +Patch36: 0036-95iscsi-Autodetect-iSCSI-firmware.patch +Patch37: 0037-95iscsi-Install-libgcc_s-library.patch +Patch38: 0038-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch +Patch39: 0039-95iscsi-strip-one-set-of-quotes-when-calling-initque.patch +Patch40: 0040-95iscsi-Fixup-bnx2i-offload-booting.patch +Patch41: 0041-95iscsi-More-empty-cmdline-fixes.patch +Patch42: 0042-95iscsi-generate-commandline-for-software-iscsi.patch +Patch43: 0043-iscsi-iscsi.initiator-and-others-can-and-must-only-s.patch +Patch44: 0044-Implement-rd.timeout-to-modify-the-device-timeout.patch +Patch45: 0045-Do-not-call-lvm-for-non-LVM-device-mapper-devices.patch +Patch46: 0046-Print-stored-dracut-commandline-during-initramfs-bui.patch +Patch47: 0047-Align-dev_unit_name-with-systemd-s-function.patch +Patch48: 0048-Generate-fallback-mount-unit-for-root-filesystem.patch +Patch49: 0049-99base-warn-on-invalid-command-for-initqueue.patch +Patch50: 0050-Handle-module-alias-properly.patch +Patch51: 0051-99base-Increase-initqueue-timeout-in-non-systemd-cas.patch +Patch52: 0052-90lvm-Install-dm-snapshot-module.patch +Patch53: 0053-Check-for-logfile-logfile-option-and-create-it-if-ne.patch +Patch54: 0054-dracut.sh-Avoid-duplicate-devices-in-host_devs.patch +Patch55: 0055-dracut.sh-Fix-UUID-fstab-parsing-in-case-mount-optio.patch +Patch56: 0056-dracut.usage.asc-Remove-distro-specific-help-from-ma.patch +Patch57: 0057-nfs-Add-ip-.-and-root-nfs.-parameters-to-internal-dr.patch +Patch58: 0058-95iscsi-parse-output-from-iscsiadm-correctly.patch +Patch59: 0059-dracut-Do-not-stop-installing-drivers-if-one-fails.patch +Patch60: 0060-95fcoe-update-fcoe-interface-check.patch +Patch61: 0061-95fcoe-Store-current-configuration-in-dracut-cmdline.patch +Patch62: 0062-95fcoe-skip-VLAN-devices-in-fcoe-up.patch +Patch63: 0063-95fcoe-start-lldpad-separately.patch +Patch64: 0064-Enhance-suse.conf-and-debug-module-example-with-SUSE.patch +Patch65: 0065-40network-add-missing-_arch-variable-declaration.patch +Patch66: 0066-99base-Add-chown-binary.patch +Patch67: 0067-90kernel-modules-install-scsi_dh_alua.patch +Patch68: 0068-Fix-non-export-of-journal-dev-boot-options.patch +Patch69: 0069-Also-export-root-boot-param-for-hostonly-cmdline-cas.patch +Patch70: 0070-Don-t-create-lots-of-empty-cmdline-files-for-hostonl.patch +Patch71: 0071-95rootfs-block-Correctly-terminate-commandline-param.patch +Patch72: 0072-dracut-nbd-Only-complain-of-missing-binary-in-hoston.patch +Patch73: 0073-dracut-functions.sh-for-module-handling-strip-all-.k.patch +Patch74: 0074-Revert-95rootfs-block-Correctly-terminate-commandlin.patch +Patch75: 0075-resume-make-use-of-systemd-hibernate-resume-if-exist.patch +Patch76: 0076-systemd-add-systemd-journald-audit.socket.patch +Patch77: 0077-dracut-Don-t-fail-at-copying-files-when-including-di.patch Source1: https://www.gnu.org/licenses/lgpl-2.1.txt @@ -507,6 +555,9 @@ rm -rf -- $RPM_BUILD_ROOT %endif %changelog +* Fri Dec 19 2014 Harald Hoyer 040-78.git20141219 +- git snapshot + * Mon Dec 08 2014 Harald Hoyer 040-30.git20141208 - fixed dracut-shutdown