# Do not terminate build if language files are empty.

%define _empty_manifest_terminate_build 0

Name:           authselect

Version:        1.2.6

Release:        1%{?dist}

Summary:        Configures authentication and identity sources from supported profiles

URL:            https://github.com/authselect/authselect

License:        GPLv3+

Source0:        %{url}/archive/%{version}/%{name}-%{version}.tar.gz

Patch0001:  0001-po-update-translations.patch

### Downstream Patches ###

Patch0901:  0901-rhel9-remove-mention-of-Fedora-Change-page-in-compat.patch

Patch0902:  0902-rhel9-remove-ecryptfs-support.patch

Patch0903:  0903-rhel9-Revert-profiles-add-support-for-resolved.patch

Patch0904:  0904-rhel9-remove-nis-support.patch

Patch0905:  0905-rhel9-Revert-yescrypt.patch

%global makedir %{_builddir}/%{name}-%{version}

BuildRequires:  autoconf

BuildRequires:  automake

BuildRequires:  findutils

BuildRequires:  libtool

BuildRequires:  m4

BuildRequires:  gcc

BuildRequires:  pkgconfig

BuildRequires:  pkgconfig(popt)

BuildRequires:  gettext-devel

BuildRequires:  po4a

BuildRequires:  %{_bindir}/a2x

BuildRequires:  libcmocka-devel >= 1.0.0

BuildRequires:  libselinux-devel

BuildRequires:  python3-devel

Requires: authselect-libs%{?_isa} = %{version}-%{release}

Suggests: sssd

Suggests: samba-winbind

Suggests: fprintd-pam

Suggests: oddjob-mkhomedir

%description

Authselect is designed to be a replacement for authconfig but it takes

a different approach to configure the system. Instead of letting

the administrator build the PAM stack with a tool (which may potentially

end up with a broken configuration), it would ship several tested stacks

(profiles) that solve a use-case and are well tested and supported.

At the same time, some obsolete features of authconfig are not

supported by authselect.

%package libs

Summary: Utility library used by the authselect tool

# Required by scriptlets

Requires: coreutils

Requires: findutils

Requires: gawk

Requires: grep

Requires: sed

Requires: systemd

Requires: pam >= 1.3.1-23

%description libs

Common library files for authselect. This package is used by the authselect

command line tool and any other potential front-ends.

%package compat

Summary: Tool to provide minimum backwards compatibility with authconfig

Obsoletes: authconfig < 7.0.1-6

Provides: authconfig

Requires: authselect%{?_isa} = %{version}-%{release}

Recommends: oddjob-mkhomedir

Suggests: sssd

Suggests: realmd

Suggests: samba-winbind

# Required by scriptlets

Requires: sed

%description compat

This package will replace %{_sbindir}/authconfig with a tool that will

translate some of the authconfig calls into authselect calls. It provides

only minimum backward compatibility and users are encouraged to migrate

to authselect completely.

%package devel

Summary: Development libraries and headers for authselect

Requires: authselect-libs%{?_isa} = %{version}-%{release}

%description devel

System header files and development libraries for authselect. Useful if

you develop a front-end for the authselect library.

%prep

%setup -q

for p in %patches ; do

    %__patch -p1 -i $p

done

%build

autoreconf -if

%configure --with-pythonbin="%{__python3}" --with-compat

%make_build

%check

%make_build check

%install

%make_install

# Find translations

%find_lang %{name}

%find_lang %{name} %{name}.8.lang --with-man

%find_lang %{name}-migration %{name}-migration.7.lang --with-man

%find_lang %{name}-profiles %{name}-profiles.5.lang --with-man

# We want this file to contain only manual page translations

%__sed -i '/LC_MESSAGES/d' %{name}.8.lang

# Remove .la and .a files created by libtool

find $RPM_BUILD_ROOT -name "*.la" -exec %__rm -f {} \;

find $RPM_BUILD_ROOT -name "*.a" -exec %__rm -f {} \;

%ldconfig_scriptlets libs

%files libs -f %{name}.lang -f %{name}-profiles.5.lang

%dir %{_sysconfdir}/authselect

%dir %{_sysconfdir}/authselect/custom

%ghost %attr(0644,root,root) %{_sysconfdir}/authselect/authselect.conf

%ghost %attr(0644,root,root) %{_sysconfdir}/authselect/dconf-db

%ghost %attr(0644,root,root) %{_sysconfdir}/authselect/dconf-locks

%ghost %attr(0644,root,root) %{_sysconfdir}/authselect/fingerprint-auth

%ghost %attr(0644,root,root) %{_sysconfdir}/authselect/nsswitch.conf

%ghost %attr(0644,root,root) %{_sysconfdir}/authselect/password-auth

%ghost %attr(0644,root,root) %{_sysconfdir}/authselect/postlogin

%ghost %attr(0644,root,root) %{_sysconfdir}/authselect/smartcard-auth

%ghost %attr(0644,root,root) %{_sysconfdir}/authselect/system-auth

%ghost %attr(0644,root,root) %{_sysconfdir}/authselect/user-nsswitch.conf

%dir %{_localstatedir}/lib/authselect

%ghost %attr(0755,root,root) %{_localstatedir}/lib/authselect/backups/

%ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/dconf-db

%ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/dconf-locks

%ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/fingerprint-auth

%ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/nsswitch.conf

%ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/password-auth

%ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/postlogin

%ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/smartcard-auth

%ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/system-auth

%ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/user-nsswitch-created

%dir %{_datadir}/authselect

%dir %{_datadir}/authselect/vendor

%dir %{_datadir}/authselect/default

%dir %{_datadir}/authselect/default/minimal/

%dir %{_datadir}/authselect/default/sssd/

%dir %{_datadir}/authselect/default/winbind/

%{_datadir}/authselect/default/minimal/dconf-db

%{_datadir}/authselect/default/minimal/dconf-locks

%{_datadir}/authselect/default/minimal/fingerprint-auth

%{_datadir}/authselect/default/minimal/nsswitch.conf

%{_datadir}/authselect/default/minimal/password-auth

%{_datadir}/authselect/default/minimal/postlogin

%{_datadir}/authselect/default/minimal/README

%{_datadir}/authselect/default/minimal/REQUIREMENTS

%{_datadir}/authselect/default/minimal/smartcard-auth

%{_datadir}/authselect/default/minimal/system-auth

%{_datadir}/authselect/default/sssd/dconf-db

%{_datadir}/authselect/default/sssd/dconf-locks

%{_datadir}/authselect/default/sssd/fingerprint-auth

%{_datadir}/authselect/default/sssd/nsswitch.conf

%{_datadir}/authselect/default/sssd/password-auth

%{_datadir}/authselect/default/sssd/postlogin

%{_datadir}/authselect/default/sssd/README

%{_datadir}/authselect/default/sssd/REQUIREMENTS

%{_datadir}/authselect/default/sssd/smartcard-auth

%{_datadir}/authselect/default/sssd/system-auth

%{_datadir}/authselect/default/winbind/dconf-db

%{_datadir}/authselect/default/winbind/dconf-locks

%{_datadir}/authselect/default/winbind/fingerprint-auth

%{_datadir}/authselect/default/winbind/nsswitch.conf

%{_datadir}/authselect/default/winbind/password-auth

%{_datadir}/authselect/default/winbind/postlogin

%{_datadir}/authselect/default/winbind/README

%{_datadir}/authselect/default/winbind/REQUIREMENTS

%{_datadir}/authselect/default/winbind/smartcard-auth

%{_datadir}/authselect/default/winbind/system-auth

%{_libdir}/libauthselect.so.*

%{_mandir}/man5/authselect-profiles.5*

%{_datadir}/doc/authselect/COPYING

%{_datadir}/doc/authselect/README.md

%license COPYING

%doc README.md

%files compat

%{_sbindir}/authconfig

%{python3_sitelib}/authselect/

%files devel

%{_includedir}/authselect.h

%{_libdir}/libauthselect.so

%{_libdir}/pkgconfig/authselect.pc

%files  -f %{name}.8.lang  -f %{name}-migration.7.lang

%{_bindir}/authselect

%{_mandir}/man8/authselect.8*

%{_mandir}/man7/authselect-migration.7*

%{_sysconfdir}/bash_completion.d/authselect-completion.sh

%global validfile %{_localstatedir}/lib/rpm-state/%{name}.config-valid

%preun

if [ $1 == 0 ] ; then

    # Remove authselect symbolic links so all authselect files can be

    # deleted safely. If this fail, the uninstallation must fail to avoid

    # breaking the system by removing PAM files. However, the command can

    # only fail if it can not write to the file system.

    %{_bindir}/authselect uninstall

fi

%pre libs

%__rm -f %{validfile}

if [ $1 -gt 1 ] ; then

    # Remember if the current configuration is valid

    %{_bindir}/authselect check &> /dev/null

    if [ $? -eq 0 ]; then

        touch %{validfile}

    fi

fi

exit 0

%posttrans libs

# Copy nsswitch.conf to user-nsswitch.conf if it was not yet created

if [ ! -f %{_localstatedir}/lib/authselect/user-nsswitch-created ]; then

    %__cp -n %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/authselect/user-nsswitch.conf &> /dev/null

    touch %{_localstatedir}/lib/authselect/user-nsswitch-created &> /dev/null

    # If we are upgrading from older version, we want to remove these comments.

    %__sed -i '/^# Generated by authselect on .*$/{$!{

      N;N # Read also next two lines

      /# Generated by authselect on .*\n# Do not modify this file manually.\n/d

    }}' %{_sysconfdir}/authselect/user-nsswitch.conf &> /dev/null

fi

# If the configuration is valid and we are upgrading from older version

# we need to create these files since they were added in 1.0.

if [ -f %{validfile} ]; then

    FILES="nsswitch.conf system-auth password-auth fingerprint-auth \

           smartcard-auth postlogin dconf-db dconf-locks"

    for FILE in $FILES ; do

        %__cp -n %{_sysconfdir}/authselect/$FILE \

               %{_localstatedir}/lib/authselect/$FILE &> /dev/null

    done

    %__rm -f %{validfile}

fi

# Keep nss-altfiles for all rpm-ostree based systems.

# See https://github.com/authselect/authselect/issues/48

if test -e /run/ostree-booted; then

    for PROFILE in `ls %{_datadir}/authselect/default`; do

        %{_bindir}/authselect create-profile $PROFILE --vendor --base-on $PROFILE --symlink-pam --symlink-dconf --symlink=REQUIREMENTS --symlink=README &> /dev/null

        %__sed -ie "s/^\(passwd\|group\):\(.*\)systemd\(.*\)/\1:\2systemd altfiles\3/g" %{_datadir}/authselect/vendor/$PROFILE/nsswitch.conf &> /dev/null

    done

fi

# Apply any changes to profiles (validates configuration first internally)

%{_bindir}/authselect apply-changes &> /dev/null

# Enable with-sudo feature if sssd-sudo responder is enabled. RHBZ#1582111

CURRENT=`%{_bindir}/authselect current --raw 2> /dev/null`

if [ $? -eq 0 ]; then

    PROFILE=`echo $CURRENT | %__awk '{print $1;}'`

    if [ $PROFILE == "sssd" ] ; then

        if %__grep -E "services[[:blank:]]*=[[:blank:]]*.*sudo" /etc/sssd/sssd.conf &> /dev/null ; then

            %{_bindir}/authselect enable-feature with-sudo &> /dev/null

        elif systemctl is-active sssd-sudo.service sssd-sudo.socket --quiet || systemctl is-enabled sssd-sudo.socket --quiet ; then

            %{_bindir}/authselect enable-feature with-sudo &> /dev/null

        fi

    fi

fi

exit 0

%posttrans compat

# Fix for RHBZ#1618865

# Remove invalid lines from pwquality.conf generated by authconfig compat tool

# - previous version could write some options without value, which is invalid

# - we delete all options without value from existing file

%__sed -i -E '/^\w+=$/d' %{_sysconfdir}/security/pwquality.conf.d/10-authconfig-pwquality.conf &> /dev/null

exit 0

%changelog

* Thu Dec 1 2022 Pavel Březina <pbrezina@redhat.com> - 1.2.6-1

- Rebase to 1.2.6 (RHBZ #2142805)

- update translations (RHBZ #2139642)

- Change password hashing algorithm from yescrypt back to sha512 (RHBZ #2151145)

* Thu May 5 2022 Pavel Březina <pbrezina@redhat.com> - 1.2.5-1

- Rebase to 1.2.5 (RHBZ #2080239)

- backup-restore now works correctly (RHBZ #2070541)

- add with-subid to sssd profile (RHBZ #2075192)

- add with-gssapi to sssd profile (RHBZ #2077893)

* Thu Aug 26 2021 Pavel Březina <pbrezina@redhat.com> - 1.2.3-7

- Avoid freeing uninitialized variable in authselect_apply_changes (rhbz#1970871)

* Mon Aug 09 2021 Mohan Boddu <mboddu@redhat.com> - 1.2.3-6

- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags

  Related: rhbz#1991688

* Wed Jun 9 2021 Pavel Březina <pbrezina@redhat.com> - 1.2.3-5

- Remove nis support (rhbz#1968396)

* Wed Jun 9 2021 Pavel Březina <pbrezina@redhat.com> - 1.2.3-4

- Remove nis support (rhbz#1968396)

* Tue Jun 1 2021 Pavel Březina <pbrezina@redhat.com> - 1.2.3-3

- Remove systemd-resolved support (rhbz#1966484)

* Thu Apr 15 2021 Mohan Boddu <mboddu@redhat.com> - 1.2.3-2

- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937

* Wed Mar 31 2021 Pavel Březina <pbrezina@redhat.com> - 1.2.3-1

- Rebase to 1.2.3

* Mon Mar 29 2021 Benjamin Berg <bberg@redhat.com> - 1.2.2-7

- Fix fingerprint-auth success result

  The previous patch had an issue breaking fingerprint login

* Tue Mar 09 2021 Benjamin Berg <bberg@redhat.com> - 1.2.2-6

- Add patch to make fingerprint-auth return non-failing pam_fprintd.so errors

  Resolves: #1935331

* Thu Mar 4 2021 Pavel Březina <pbrezina@redhat.com> - 1.2.2-5

- minimal: add dconf settings to explicitly disable fingerprint and smartcard authentication

* Wed Feb 24 2021 Pavel Březina <pbrezina@redhat.com> - 1.2.2-4

- Prepare authselect for RHEL-9, add downstream-only patches that will be synced

* Fri Feb 19 2021 Pavel Březina <pbrezina@redhat.com> - 1.2.2-3

- Add RHEL9 only patch

* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.2-2

- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild

* Wed Nov 25 2020 Pavel Březina <pbrezina@redhat.com> - 1.2.2-1

- Rebase to 1.2.2

- Add nss-altfiles to profiles on Fedora Silverblue

* Mon Jul 27 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.2.1-4

- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild

* Wed Jul 22 2020 Pavel Březina <pbrezina@redhat.com> - 1.2.1-3

- Add resolved by default to nis and minimal profiles

- Fix parsing of multiple conditionals on the same line

* Tue May 26 2020 Miro Hrončok <mhroncok@redhat.com> - 1.2.1-2

- Rebuilt for Python 3.9

* Mon May 11 2020 Pavel Březina <pbrezina@redhat.com> - 1.2.1-1

- Rebase to 1.2.1

* Wed Mar 4 2020 Pavel Březina <pbrezina@redhat.com> - 1.2-1

- Rebase to 1.2

* Mon Feb 17 2020 Pavel Březina <pbrezina@redhat.com> - 1.1-7

- fix restoring non-authselect configuration from backup

* Wed Jan 29 2020 Pavel Březina <pbrezina@redhat.com> - 1.1-6

- cli: fix auto backup when --force is set

* Tue Jan 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.1-5

- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild

* Thu Oct 03 2019 Miro Hrončok <mhroncok@redhat.com> - 1.1-4

- Rebuilt for Python 3.8.0rc1 (#1748018)

* Mon Aug 19 2019 Miro Hrončok <mhroncok@redhat.com> - 1.1-3

- Rebuilt for Python 3.8

* Wed Jul 24 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.1-2

- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild

* Thu Jun 13 2019 Pavel Březina <pbrezina@redhat.com> - 1.1-1

- Rebase to 1.1

* Tue Feb 26 2019 Pavel Březina <pbrezina@redhat.com> - 1.0.3-1

- Rebase to 1.0.3

* Tue Feb 26 2019 Igor Gnatenko <ignatenkobrain@fedoraproject.org> - 1.0.2-4

- Use %ghost for files owned by authselect

* Thu Jan 31 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.2-3

- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild

* Mon Dec 3 2018 Pavel Březina <pbrezina@redhat.com> - 1.0.2-2

- Resolves rhbz#1655025 (invalid backup).

* Fri Nov 23 2018 Pavel Březina <pbrezina@redhat.com> - 1.0.2-1

- Rebase to 1.0.2

* Thu Sep 27 2018 Pavel Březina <pbrezina@redhat.com> - 1.0.1-2

- Require systemd instead of systemctl

* Thu Sep 27 2018 Pavel Březina <pbrezina@redhat.com> - 1.0.1-1

- Rebase to 1.0.1

* Fri Sep 14 2018 Pavel Březina <pbrezina@redhat.com> - 1.0-3

- Scriptlets should no produce any error messages (RHBZ #1622272)

- Provide fix for pwquality configuration (RHBZ #1618865)

* Thu Aug 30 2018 Adam Williamson <awilliam@redhat.com> - 1.0-2

- Backport PR #78 to fix broken pwquality config (RHBZ #1618865)

* Mon Aug 13 2018 Pavel Březina <pbrezina@redhat.com> - 1.0-1

- Rebase to 1.0

* Thu Jul 12 2018 Fedora Release Engineering <releng@fedoraproject.org> - 0.4-5

- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild

* Tue Jun 19 2018 Miro Hrončok <mhroncok@redhat.com> - 0.4-4

- Rebuilt for Python 3.7

* Mon May 14 2018 Pavel Březina <pbrezina@redhat.com> - 0.4-3

- Disable sssd as sudo rules source with sssd profile by default (RHBZ #1573403)

* Wed Apr 25 2018 Christian Heimes <cheimes@redhat.com> - 0.4-2

- Don't disable oddjobd.service (RHBZ #1571844)

* Mon Apr 9 2018 Pavel Březina <pbrezina@redhat.com> - 0.4-1

- rebasing to 0.4

* Tue Mar 6 2018 Pavel Březina <pbrezina@redhat.com> - 0.3.2-1

- rebasing to 0.3.2

- authselect-compat now only suggests packages, not recommends

* Mon Mar 5 2018 Pavel Březina <pbrezina@redhat.com> - 0.3.1-1

- rebasing to 0.3.1

* Tue Feb 20 2018 Igor Gnatenko <ignatenkobrain@fedoraproject.org> - 0.3-3

- Provide authconfig

* Tue Feb 20 2018 Igor Gnatenko <ignatenkobrain@fedoraproject.org> - 0.3-2

- Properly own all appropriate directories

- Remove unneeded %%defattr

- Remove deprecated Group tag

- Make Obsoletes versioned

- Remove unneeded ldconfig scriptlets

* Tue Feb 20 2018 Pavel Březina <pbrezina@redhat.com> - 0.3-1

- rebasing to 0.3

* Wed Feb 07 2018 Fedora Release Engineering <releng@fedoraproject.org> - 0.2-3

- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild

* Wed Jan 10 2018 Pavel Březina <pbrezina@redhat.com> - 0.2-2

- fix rpmlint errors

* Wed Jan 10 2018 Pavel Březina <pbrezina@redhat.com> - 0.2-1

- rebasing to 0.2

* Mon Jul 31 2017 Jakub Hrozek <jakub.hrozek@posteo.se> - 0.1-1

- initial packaging