diff --git a/.alsa-utils.metadata b/.alsa-utils.metadata
new file mode 100644
index 0000000..f87edb1
--- /dev/null
+++ b/.alsa-utils.metadata
@@ -0,0 +1 @@
+dfec4691dde6b2cee292bbd10f0f368158713e8f SOURCES/alsa-utils-1.0.27.2.tar.bz2
diff --git a/README.md b/README.md
deleted file mode 100644
index 0e7897f..0000000
--- a/README.md
+++ /dev/null
@@ -1,5 +0,0 @@
-The master branch has no content
- 
-Look at the c7 branch if you are working with CentOS-7, or the c4/c5/c6 branch for CentOS-4, 5 or 6
- 
-If you find this file in a distro specific branch, it means that no content has been checked in yet
diff --git a/SOURCES/alsa-delay b/SOURCES/alsa-delay
new file mode 100755
index 0000000..a412188
--- /dev/null
+++ b/SOURCES/alsa-delay
@@ -0,0 +1,979 @@
+#!/bin/bash
+
+version=0.1.0
+tmpdir=$TMPDIR
+if test -z "$tmpdir"; then
+	tmpdir="/tmp"
+fi
+tmpdir=$tmpdir/alsa-delay-script
+
+delay=
+pcard=
+pdev=
+ccard=
+cdev=
+
+yes=
+quiet=
+clean=
+remove=
+
+pdevice="default:%s"
+pdevice_set=
+cdevice="plughw:%s,%s,%s"
+pctl=
+cctl=
+one=
+arg=
+mix=
+pa=
+
+useprocfs=yes
+
+fuser_prg=fuser
+insmod_prg=insmod
+rmmod_prg=rmmod
+lsmod_prg=lsmod
+modprobe_prg=modprobe
+chkconfig_prg=chkconfig
+systemctl_prg=systemctl
+pidof_prg=pidof
+alsaloop_prg=alsaloop
+amixer_prg=amixer
+test -x /sbin/fuser && fuser_prg=/sbin/fuser
+test -x /sbin/insmod && insmod_prg=/sbin/insmod
+test -x /sbin/rmmod && rmmod_prg=/sbin/rmmod
+test -x /sbin/lsmod && lsmod_prg=/sbin/lsmod
+test -x /sbin/modprobe && modprobe_prg=/sbin/modprobe
+test -x /sbin/chkconfig && chkconfig_prg=/sbin/chkconfig
+test -x /bin/systemctl && systemctl_prg=/bin/systemctl
+test -x /sbin/pidof && pidof_prg=/sbin/pidof
+test -x /usr/bin/alsaloop && alsaloop_prg=/usr/bin/alsaloop
+test -x /usr/local/bin/alsaloop && alsaloop_prg=/usr/local/bin/alsaloop
+test -x /usr/bin/amixer && amixer_prg=/usr/bin/amixer
+
+modprobeconf=/etc/modprobe.d/alsa.conf
+test -r /etc/modprobe.conf && modprobeconf=/etc/modprobe.conf && useprocfs=""
+alsaloopconf=/etc/alsaloop.conf
+
+test -r modprobe.work && modprobeconf=modprobe.work
+test -r modprobe.work && alsaloopconf=alsaloop.conf
+
+usage() {
+	echo "Usage: $0 [OPTION]... <requested_delay_in_ms> [<output_card>[,<device>]]"
+	cat <<EOF
+
+This is a delay utility version $version. The snd-aloop ALSA driver is
+used to send all PCM streams back to the user space and the alsaloop
+utility is used to send this stream to a real hardware.
+
+<output_card> is ALSA card index (number) or string card identifier
+<device> is ALSA device number
+
+Use 'aplay -l' to list available cards and devices.
+
+Operation modes:
+  -h, --help		print this help, then exit
+  -q, --quiet		quiet mode
+  -y, --yes		do not ask any questions - answer is always yes
+  -c, --clean           clean temporary directory and exit
+  -r, --remove          remove the alsa-delay config modifications and exit
+  --tmpdir=<DIR>        set temporary directory
+Alsaloop options:
+  --pdevice=<DEV>       force playback device
+  --cdevice=<DEV>       force capture device
+  --pctl=<DEV>          force playback ctl device
+  --cctl=<DEV>          force capture ctl device
+  --one=<ARG>           pass this argument to last thread
+  --arg=<ARG>           pass this argument to all threads
+  --mix=<ARG>           redirect ALSA mixer controls to OSS mixer
+			(default is Master)
+  --pa			Redirect PA to alsaloop
+
+Note: For devices, the string %s is replaced with the card index
+      and second string %s is replaced with the device index
+      and third string %s is replaced the substream index (0-7).
+      Example: hw:%s,%s,%s    (card, device, substream)
+EOF
+}
+
+while :
+do
+	case "$1" in
+	-h|--help)
+		usage
+		exit 0
+		;;
+	-q|--quiet)
+		quiet=true ;;
+	-y|--yes)
+		yes=true ;;
+	-c|--clean)
+		clean="full" ;;
+	-r|--remove)
+		remove="full" ;;
+	--tmpdir*)
+		case "$#,$1" in
+		*,*=*)
+			tmpdir=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
+		1,*)
+			usage ;;
+		*)
+			tmpdir="$2"
+			shift ;;
+		esac
+		tmpdir="$tmpdir/alsa-compile-script"
+		;;
+	--pdevice*)
+		case "$#,$1" in
+		*,*=*)
+			pdevice=`expr "z$1" : 'z-[^=]*=\(.*\)'`
+			pdevice_set=yes ;;
+		1,*)
+			usage ;;
+		*)
+			pdevice="$2"
+			pdevice_set=yes
+			shift ;;
+		esac
+		;;
+	--cdevice*)
+		case "$#,$1" in
+		*,*=*)
+			cdevice=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
+		1,*)
+			usage ;;
+		*)
+			cdevice="$2"
+			shift ;;
+		esac
+		;;
+	--pctl*)
+		case "$#,$1" in
+		*,*=*)
+			pctl=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
+		1,*)
+			usage ;;
+		*)
+			pctl="$2"
+			shift ;;
+		esac
+		;;
+	--cctl*)
+		case "$#,$1" in
+		*,*=*)
+			cctl=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
+		1,*)
+			usage ;;
+		*)
+			cctl="$2"
+			shift ;;
+		esac
+		;;
+	--one*)
+		case "$#,$1" in
+		*,*=*)
+			one1=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
+		1,*)
+			usage ;;
+		*)
+			one1="$2"
+			shift ;;
+		esac
+		one="$one $one1"
+		;;
+	--arg*)
+		case "$#,$1" in
+		*,*=*)
+			arg1=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
+		1,*)
+			usage ;;
+		*)
+			arg1="$2"
+			shift ;;
+		esac
+		arg="$arg $arg1"
+		;;
+	--mix*)
+		case "$#,$1" in
+		*,*=*)
+			mix=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
+		1,*)
+			usage ;;
+		*)
+			mix="$2"
+			shift ;;
+		esac
+		arg="$arg $arg1"
+		;;
+	--pa)
+		pa=true
+		;;
+	*)
+		if test -n "$1"; then
+			ok=
+			if test -z "$delay"; then
+				delay="$1"
+				if test "$delay" -lt 1000; then
+					delay=$[$delay * 1000]
+				fi
+				ok=true
+			fi
+			if test -z "$ok" -a -z "$pcard"; then
+				pcard="$1"
+				ok=true
+			fi
+			if test -z "$ok"; then
+				echo "Unknown parameter '$1'"
+				break
+			fi
+		else
+			break
+		fi
+		;;
+	esac
+	shift
+done
+
+test -z "$pdevice_set" -a -n "$pa" && pdevice="plug:dmix:%s"
+test -z "$delay" && delay="50000"
+test -z "$pcard" && pcard="1"
+pdev=$(echo $pcard | cut -s -d , -f 2)
+pcard=$(echo $pcard | cut -d , -f 1)
+test -z "$pdev" && pdev="0"
+test -z "$ccard" && ccard="Loopback,1"
+cdev=$(echo $ccard | cut -s -d , -f 2)
+ccard=$(echo $ccard | cut -d , -f 1)
+test -z "$cdev" && cdev="0"
+
+# Echo "true" or "false", depending on $yes and user response to prompt
+# $1 is prompt message
+question_bool() {
+	if test "$yes" = "yes"; then
+		echo "true"
+	else
+		echo >&2 -n "$1 (Y/ ) "
+		read i
+		local i=${i:0:1}
+		if test "$i" = "Y" -o "$i" = "y"; then
+			echo "true"
+		else
+			echo "false"
+		fi
+	fi
+}
+
+# Safe exit
+safe_exit() {
+	if test -r /etc/pulse/client.conf ; then
+		if grep "# alsa-delay-line-to-be-removed-1234" /etc/pulse/client.conf 2> /dev/null > /dev/null ; then
+			grep -v alsa-delay-line-to-be-removed-1234 /etc/pulse/client.conf > /etc/pulse/client.conf.new
+			if test -s /etc/pulse/client.conf.new; then
+				mv /etc/pulse/client.conf.new /etc/pulse/client.conf
+			fi
+		fi
+	fi
+	exit $1
+}
+
+# Log and execute $@ and check success
+do_cmd() {
+	if test -z "$quiet"; then
+		echo "> $@"
+	fi
+	$@ || safe_exit 1
+}
+
+# Cache or restore $protocol and $url and $package in $tmpdir
+check_environment() {
+	if ! test -d $tmpdir ; then
+		mkdir -p $tmpdir
+		if ! test -d $tmpdir; then
+			echo >&2 "Unable to create directory $tmpdir."
+			exit 1
+		fi
+	fi
+	echo "Using temporary tree: $tmpdir"
+	test -x /bin/depmod && depmodbin=/bin/depmod
+	test -x /sbin/depmod && depmodbin=/sbin/depmod
+	if test -z "$depmodbin"; then
+		echo >&2 "Unable to find depmod utility."
+		exit 1
+	fi
+	test -x /bin/modinfo && modinfobin=/bin/modinfo
+	test -x /sbin/modinfo && modinfobin=/sbin/modinfo
+	if test -z "$modinfobin"; then
+		echo >&2 "Unable to find modinfo utility."
+		exit 1
+	fi
+}
+
+# Kill processes currently accessing the audio devices
+kill_audio_apps() {
+	local pids0=$($fuser_prg /dev/snd/* 2> /dev/null)
+	local pids1=$($fuser_prg /dev/mixer* 2> /dev/null)
+	local pids2=$($fuser_prg /dev/sequencer* 2> /dev/null)
+	local pids=
+	for pid in $pids0 $pids1 $pids2; do
+		local pids="$pids $pid"
+	done
+	if ! test -z "$pids"; then
+		echo
+		echo "WARNING! An audio application uses ALSA driver:"
+		echo
+		for pid in $pids; do
+			ps --no-headers -p $pids || safe_exit 1
+		done
+		echo
+		if test $(question_bool "Would you like to kill these apps?") = "true"; then
+			if test -w /etc/pulse/client.conf ; then
+				echo "autospawn = no # alsa-delay-line-to-be-removed-1234" >> /etc/pulse/client.conf
+			fi
+			for pid in $pids; do
+				do_cmd kill $pid
+			done
+			sleep 2
+			local killed=
+			for pid in $pids; do
+				local a=$(ps --no-headers -p $pids)
+				if test -n "$a"; then
+					do_cmd kill -9 $pid
+					local killed="true"
+				fi
+			done
+			if test "$killed" = "true"; then
+				sleep 2
+				for pid in $pids; do
+					local a=$(ps --no-headers -p $pids)
+					if test -n "$a"; then
+						echo >&2 "Unable to kill application:"
+						echo >&2 "  $a"
+						safe_exit 1
+					fi
+				done
+			fi
+		else
+			echo >&2 "Cannot continue with running audio applications."
+			safe_exit 1
+		fi
+	fi
+}
+
+# Echo the list of configured sound modules
+configured_modules() {
+	if test -z "$useprocfs"; then
+		cat $modprobeconf | grep -E "^alias snd-card-" | cut -d ' ' -f 3
+	else
+		cat /proc/asound/modules | colrm 1 3
+	fi
+}
+
+# Echo the list of loaded sound modules
+current_modules() {
+	$lsmod_prg | cut -d ' ' -f 1 | grep -E "^(snd[_-])"
+}
+
+# The loopback kernel driver detection
+aloop_present() {
+	if test -r /proc/asound/card0/id; then
+		local id=$(cat /proc/asound/card0/id)
+	else
+		local id=""
+	fi
+	if test "$id" = "Loopback"; then
+		echo "yes"
+	fi
+}
+
+# Remove kernel modules, using two phases
+# $@ is module names
+my_rmmod() {
+	local phase2=
+	while test -n "$1"; do
+		if ! $rmmod_prg $1 2> /dev/null > /dev/null; then
+			local phase2="$phase2 $1"
+		else
+			echo "> rmmod $1"
+		fi
+		shift
+	done
+	for mod in $phase2; do
+		echo "> rmmod $mod"
+		if ! $rmmod_prg $mod ; then
+			echo >&2 "Unable to remove kernel module $mod."
+			safe_exit 1
+		fi
+	done
+}
+
+# Reload kernel modules
+kernel_modules() {
+	kill_audio_apps
+	if test "$1" = "unload"; then
+		local present=$(aloop_present)
+		if test "$present" = "yes"; then
+			if ! $rmmod_prg snd-aloop; then
+				echo >&2 "Unable to remove kernel module snd-aloop."
+				safe_exit 1
+			fi
+		fi
+	fi
+	local curmods=$(current_modules)
+	local usermods=$(configured_modules)
+	my_rmmod $curmods
+	$modprobe_prg soundcore || safe_exit 1
+	if test "$1" = "load"; then
+		if ! $modprobe_prg snd-aloop; then
+			echo >&2 "Unable to install kernel module snd-aloop."
+			safe_exit 1
+		fi
+	fi
+	for mod in $usermods; do
+		if ! $modprobe_prg $mod; then
+			echo >&2 "Unable to install kernel module $mod."
+			safe_exit 1
+		fi
+	done
+	echo "Kernel modules ready:"
+	cat /proc/asound/cards
+	sleep 0.5
+}
+
+# If $package is alsa-driver then remove current modules
+kernel_modules_remove() {
+	local curmods=$(current_modules)
+	if test -z "$curmods"; then
+		echo "No ALSA kernel modules to remove."
+		safe_exit 0
+	fi
+	kill_audio_apps
+	my_rmmod $curmods
+	echo "ALSA kernel modules removed."
+}
+
+function clean() {
+	echo -n "Removing tree $tmpdir:"
+	if test -d "$tmpdir"; then
+		if ! rm -rf "$tmpdir"; then
+			echo " failed"
+			safe_exit 1
+		fi
+	fi
+	echo " success"
+}
+
+function reindex_modprobe_conf() {
+	if test -z "$useprocfs"; then
+		cat > $tmpdir/run.awk <<EOF
+function rewrite_line(line,   res, c, i, j) {
+	split(line, l, " ")
+	if (l[1] == "alias") {
+		printf(l[1])
+		c = int(substr(l[2], 9)) + 1
+		printf(" snd-card-%i %s\n", c, l[3])
+	} else if (l[1] == "options") {
+		printf(l[1])
+		for (i = 2; i <= length(l); i++) {
+			c = substr(l[i], 0, 9)
+			if (c == "snd-card-") {
+				c = int(substr(l[i], 9)) + 1
+				printf(" snd-card-%i", c)
+				continue
+			}
+			c = substr(l[i], 0, 6)
+			if (c == "index=") {
+				printf(" index=")
+				c = substr(l[i], 6)
+				split(c, y, ",")
+				for (j = 1; j <= length(y); j++) {
+					c = int(y[j]) + 1
+					if (j > 1)
+						printf(",")
+					printf("%i", c)
+				}
+				continue
+			}
+			printf(" %s", l[i])
+		}
+		printf("\n")
+	} else if (l[1] == "remove") {
+		printf(l[1])
+		flag = 0
+		for (i = 2; i <= length(l); i++) {
+			if (l[i] == "/usr/sbin/alsactl" || l[i] == "store") {
+				flag++;
+				printf(" %s", l[i]);
+				continue;
+			}
+			if (flag == 2) {
+				c = int(l[i]) + 1;
+				printf(" %i", c);
+				flag = 0;
+				continue;
+			}
+			flag = 0;
+			printf(" %s", l[i]);
+		}
+		printf("\n")
+	} else {
+		print line
+	}
+}
+
+BEGIN			{ aloop=0; }
+/alias snd-card-0 snd-aloop/ { aloop=1; next; }
+/options snd-card-0 index=0/ { if (aloop) next; }
+/options snd-aloop/	{ next; }
+/alias snd-card-/	{ rewrite_line(\$0); next; }
+/options snd-/		{ rewrite_line(\$0); next; }
+/remove snd-/		{ rewrite_line(\$0); next; }
+			{ print \$0; }
+EOF
+		cat $modprobeconf | awk -f $tmpdir/run.awk > $modprobeconf.new
+		rm $tmpdir/run.awk || safe_exit 1
+	else
+		local index=1
+		echo -n "" > $modprobeconf.new
+		declare -a modules printed
+		for mod in $(cat /proc/asound/modules | grep -Ev "^2[6789]" | colrm 1 3); do
+			if test "$mod" != "snd_aloop" -a "$mod" != "snd-aloop"; then
+				if test -z ${modules[$mod]}; then
+					modules[$mod]=$index
+				else
+					modules[$mod]="${modules[mod]},$index"
+				fi
+				echo "alias snd-card-$index $mod" >> $modprobeconf.new
+				echo "options snd-card-$index index=$index" >> $modprobeconf.new
+			fi
+			index=$(expr $index + 1)
+		done
+		for mod in $(cat /proc/asound/modules | grep -Ev "^2[6789]" | colrm 1 3); do
+			if test "$mod" != "snd_aloop" -a "$mod" != "snd-aloop"; then
+				if test -z ${printed[$mod]}; then
+					echo "options $mod index=${modules[$mod]}" >> $modprobeconf.new
+					printed[$mod]=yes
+				fi
+			fi
+		done
+	fi
+cat >> $modprobeconf.new <<EOF
+alias snd-card-0 snd-aloop
+options snd-card-0 index=0
+options snd-aloop index=0
+EOF
+	if ! test -f $modprobeconf.alsa-delay.save ; then
+		if ! test -f $modprobeconf ; then
+			touch $modprobeconf.alsa-delay.save
+		else
+			cp $modprobeconf $modprobeconf.alsa-delay.save
+		fi
+	fi
+	mv $modprobeconf.new $modprobeconf || safe_exit 1
+}
+
+function modify_modprobe_conf() {
+	local check=$(cat $modprobeconf 2> /dev/null | grep -E "^alias snd-card-0 snd-aloop")
+	local present=$(aloop_present)
+	if test -n "$check"; then
+		echo "Module snd-aloop is already installed."
+		if ! test "$present" = "yes"; then
+			kernel_modules load
+		fi
+	else
+		reindex_modprobe_conf
+		if ! test "$present" = "yes"; then
+			kernel_modules load
+		else
+			kernel_modules
+		fi
+	fi
+}
+
+function myprintf() {
+	local cnt=$(echo "$1" | grep -o "%" | wc -l)
+	if test $cnt -eq 1; then
+		printf "$1" "$2"
+	else if test $cnt -eq 2; then
+		printf "$1" "$2" "$3"
+	else
+		printf "$1" "$2" "$3" "$4"
+	fi
+	fi
+}
+
+function check_ctl_name() {
+	$amixer_prg -D "$1" contents | grep "name='$2'"
+}
+
+function check_oss_mixer() {
+	grep ": mixer" /proc/asound/oss/devices
+}
+
+function get_card_id() {
+	$amixer_prg -D "$1" info | head -1 | cut -d '/' -f 1 | cut -d ' ' -f 3- | awk '{ print substr($0, 2, length($0)-2) }'
+}
+
+function generate_alsaloop_line() {
+	local file="$1"
+	local idx="$2"
+	local carg=$(myprintf "$cdevice" $ccard $cdev $idx)
+	local parg=$(myprintf "$pdevice" $pcard $pdev $idx)
+	local res="-C $carg -P $parg -T $idx -t $delay"
+	if test -n "$cctl"; then
+		local carg=$(myprintf "$cctl" $pcard $cdev $idx)
+		local res="$res -Y $carg"
+	fi
+	if test -n "$pctl"; then
+		local parg=$(myprintf "$pctl" $pcard $pdev $idx)
+		local res="$res -X $parg"
+	fi
+	if test -n "$arg"; then
+		local res="$res $arg"
+	fi
+	if test $idx -eq 7; then
+		if test -n "$one"; then
+			local res="$res $one"
+		fi
+		if test -z "$pctl"; then
+			local res="$res -X hw:$pcard"
+		fi
+		local mymix="$mix"
+		if test -z "$mymix"; then
+			local mymix="Master"
+			for mymix in Master "Master Mono" Headphone Headphone2 PCM Speaker \
+				     "Desktop Speaker" Beep Front Rear Center LFE Side \
+				     Surround ; do
+				local check=$(check_ctl_name hw:$pcard "$mymix Playback Switch")
+				if test -n "$check"; then
+					local res="$res -m \"name='$mymix Playback Switch'\""
+				fi
+				local check=$(check_ctl_name hw:$pcard "$mymix Playback Volume")
+				if test -n "$check"; then
+					local res="$res -m \"name='$mymix Playback Volume'\""
+				fi
+			done
+		else
+			local check=$(check_ctl_name hw:$pcard "$mymix Playback Switch")
+			if test -n "$check"; then
+				local res="$res -m \"name='$mymix Playback Switch'\""
+			fi
+			local check=$(check_ctl_name hw:$pcard "$mymix Playback Volume")
+			if test -n "$check"; then
+				local res="$res -m \"name='$mymix Playback Volume'\""
+			fi
+		fi
+		local check=$(check_oss_mixer)
+		if test -n "$check"; then
+			local res="$res -O \"$mymix@VOLUME\""
+		fi
+	fi
+	echo $res >> $file
+}
+
+function generate_alsaloop_conf() {
+	local idx=0
+	rm -f $alsaloopconf.new
+	while test $idx -lt 8; do
+		generate_alsaloop_line $alsaloopconf.new $idx
+		idx=$(expr $idx + 1)
+	done
+	mv $alsaloopconf.new $alsaloopconf || safe_exit 1
+}
+
+function kill_alsaloop() {
+	local pid=$($pidof_prg alsaloop)
+	if test -n "$pid"; then
+		echo "Killing alsaloop..."
+	fi
+	while test -n "$pid"; do
+		kill $pid
+		sleep 0.01
+		pid=$($pidof_prg alsaloop)
+	done
+}
+
+function restart_alsaloop() {
+	echo "Restarting alsaloop: delay $delay us."
+	if test -d /etc/systemd/system; then
+		systemctl start alsaloop.service
+	else
+		/etc/init.d/alsaloop start
+	fi
+	sleep 0.4
+	local pid=$($pidof_prg alsaloop)
+	if test -z "$pid"; then
+		echo "ERROR: Not started, check /var/log/messages for details"
+	else
+		if test -d /etc/systemd/system; then
+			systemctl status alsaloop.service
+		else
+			ps -p $pid
+		fi
+	fi
+}
+
+function create_systemd_service() {
+	if test -r /etc/systemd/system/alsaloop.service; then
+		echo "/etc/systemd/system/alsaloop.service exists"
+	else
+		cat >> /etc/systemd/system/alsaloop.service <<EOF
+# This file was created by the alsa-delay utility
+
+[Unit]
+Description=The alsaloop daemon service
+After=alsa-restore.service
+Before=shutdown.target
+Conflicts=shutdown.target
+
+[Service]
+Type=simple
+ExecPre=-/sbin/modprobe snd-aloop
+ExecStart=-/usr/bin/alsaloop --syslog --config $alsaloopconf
+EOF
+		ln -sf ../alsaloop.service /etc/systemd/system/basic.target.wants/alsaloop.service
+	fi
+}
+
+function create_initd() {
+	if test -x /etc/init.d/alsaloop; then
+		echo "/etc/init.d/alsaloop exists"
+	else
+		cat >> /etc/init.d/alsaloop <<EOF
+#! /bin/sh
+
+# alsaloop init file
+# Copyright (C) 2010 Jaroslav Kysela <jkysela@redhat.com>
+
+# For RedHat and cousins:
+# chkconfig: 2345 99 01
+# description: Start alsaloop daemon
+# processname: alsaloop
+
+### BEGIN INIT INFO
+# Provides: alsaloop
+# Required-Start: \$local_fs
+# Required-Stop: \$local_fs
+# Should-Start:
+# Short-Description: ALSALOOP
+# Description: ALSALOOP
+### END INIT INFO
+
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2, or (at your option) any later
+# version.
+# You should have received a copy of the GNU General Public License (for
+# example COPYING); if not, write to the Free Software Foundation, Inc., 675
+# Mass Ave, Cambridge, MA 02139, USA.
+# This code was originally developed as a Senior Thesis by Michael Cornwell
+# at the Concurrent Systems Laboratory (now part of the Storage Systems
+# Research Center), Jack Baskin School of Engineering, University of
+# California, Santa Cruz. http://ssrc.soe.ucsc.edu/.
+
+alsaloop_opts="--daemonize --workaround serialopen --config $alsaloopconf"
+
+ALSALOOP_BIN=/usr/bin/alsaloop
+test -x /usr/local/bin/alsaloop && ALSALOOP_BIN=/usr/local/bin/alsaloop
+
+# Source function library
+. /etc/rc.d/init.d/functions
+
+RETVAL=0
+prog=alsaloop
+pidfile=/var/lock/subsys/alsaloop
+
+start()
+{
+	modprobe snd-aloop
+	echo -n \$"Starting \$prog: "
+	daemon \$ALSALOOP_BIN \$alsaloop_opts
+	RETVAL=\$?
+	echo
+	[ \$RETVAL = 0 ] && touch \$pidfile
+	return \$RETVAL
+}
+
+stop()
+{
+	echo -n \$"Shutting down \$prog: "
+	killproc \$ALSALOOP_BIN
+	RETVAL=\$?
+	echo
+	rm -f \$pidfile
+	return \$RETVAL
+}
+
+case "\$1" in
+	start)
+		start
+		;;
+	stop)
+		stop
+		;;
+	restart)
+		stop
+		start
+		;;
+	try-restart)
+		if [ -f \$pidfile ]; then
+			stop
+			start
+		fi
+		;;
+	status)
+		status $prog
+		RETVAL=$?
+		;;
+	*)
+		echo \$"Usage: \$0 {start|stop|restart|try-restart}"
+		RETVAL=3
+esac
+
+exit \$RETVAL
+EOF
+		chmod 755 /etc/init.d/alsaloop || safe_exit 1
+		$chkconfig_prg --add alsaloop
+		$chkconfig_prg alsaloop on
+	fi
+}
+
+function modify_pa_conf() {
+
+	if grep Loopback /etc/pulse/default.pa > /dev/null; then
+		echo "/etc/pulse/default.pa already modified"
+	else
+		if test -f /etc/pulse/default.pa; then
+			local pcardid=$(get_card_id "hw:$pcard")
+			if ! test -f /etc/pulse/default.pa.alsa-delay.save ; then
+				cp /etc/pulse/default.pa /etc/pulse/default.pa.alsa-delay.save
+			fi
+			cat /etc/pulse/default.pa | \
+				sed -e 's/^load-module module-udev-detect/#load-module module-udev-detect # commented by alsa-delay/' \
+				    -e 's/^load-module module-detect/#load-module module-detect # commented by alsa-delay/' \
+				    -e "s/^### Automatically load driver modules for Bluetooth hardware/load-module module-alsa-card device_id=Loopback\nload-module module-alsa-card device_id=$pcardid\n\n### Automatically load driver modules for Bluetooth hardware/" > /etc/pulse/default.pa.new
+			if test -s /etc/pulse/default.pa.new; then
+				mv /etc/pulse/default.pa.new /etc/pulse/default.pa
+				echo "/etc/pulse/default.pa changed"
+			fi
+		fi
+	fi
+
+	local file=
+	local asoundconf=
+	if test -d /etc/alsa -a -f /etc/alsa/pulse-default.conf; then
+		file=/etc/alsa/alsaloop-default.conf
+		asoundconf=yes
+	fi
+	if test -f /usr/share/alsa/alsa.conf.d/99-pulseaudio-default.conf ; then
+		file=/usr/share/alsa/alsa.conf.d/A0-alsaloop-default.conf
+	fi
+	if test -z "$file"; then
+		echo "unknown PulseAudio setup (asound.conf)"
+	elif test -f $file; then
+		echo "$file exists"
+	else
+		cat >> $file <<EOF
+pcm.!default {
+	@args [ CARD ]
+	@args.CARD {
+		type string
+	}
+	type asym
+	playback.pcm "plughw:Loopback"
+	capture.pcm {
+		type pulse
+	}
+}
+EOF
+		if test -n "$asoundconf"; then
+			cat /etc/asound.conf | sed 's/pulse-default.conf/alsaloop-default.conf/g' > /etc/asound.conf.new
+			if test -s /etc/asound.conf.new; then
+				mv /etc/asound.conf.new /etc/asound.conf
+			fi
+		fi
+	fi
+}
+
+function remove() {
+	if test -f /etc/pulse/default.pa.alsa-delay.save ; then
+		echo "Restoring /etc/pulse/default.pa"
+		mv /etc/pulse/default.pa.alsa-delay.save /etc/pulse/default.pa
+	fi
+	if test -f /etc/init.d/alsaloop ; then
+		echo "Removing /etc/init.d/alsaloop service"
+		$chkconfig_prg alsaloop off
+		$chkconfig_prg --del alsaloop
+		rm /etc/init.d/alsaloop
+	fi
+	if test -f /etc/systemd/system/alsaloop.service ; then
+		echo "Removing /etc/systemd/system/alsaloop.service"
+		$systemctl_prg disable alsaloop.service
+		rm /etc/systemd/system/alsaloop.service
+	fi
+	if test -f $alsaloopconf ; then
+		echo "Removing $alsaloopconf"
+		rm $alsaloopconf
+	fi
+	if test -f /etc/alsa/alsaloop-default.conf ; then
+		echo "Removing /etc/alsa/alsaloop-default.conf"
+		rm /etc/alsa/alsaloop-default.conf
+	fi
+	if test -f /usr/share/alsa/alsa.conf.d/A0-alsaloop-default.conf ; then
+		echo "Removing /usr/share/alsa/alsa.conf.d/A0-alsaloop-default.conf"
+		rm /usr/share/alsa/alsa.conf.d/A0-alsaloop-default.conf
+	fi
+	if grep "alsaloop-default.conf" /etc/asound.conf > /dev/null 2> /dev/null ; then
+		echo "Modifying /etc/asound.conf"
+		cat /etc/asound.conf | sed 's/alsaloop-default.conf/pulse-default.conf/g' > /etc/asound.conf.new
+		if test -s /etc/asound.conf.new; then
+			mv /etc/asound.conf.new /etc/asound.conf
+		fi
+	fi
+	if test -f $modprobeconf.alsa-delay.save ; then
+		echo "Restoring $modprobeconf"
+		if test -s $modprobeconf.alsa-delay.save ; then
+			mv $modprobeconf.alsa-delay.save $modprobeconf
+		else
+			rm $modprobeconf.alsa-delay.save
+			rm $modprobeconf
+		fi
+	fi
+	if test $(aloop_present) = "yes"; then
+		kernel_modules unload
+	fi
+}
+
+rundir=$(pwd)
+export LC_ALL=C
+export LANGUAGE=C
+
+check_environment
+
+if test -n "$clean"; then
+	clean
+	safe_exit 0
+fi
+
+if test -n "$remove"; then
+	kill_alsaloop
+	remove
+	clean
+	safe_exit 0
+fi
+
+kill_alsaloop
+if test -d /etc/systemd/system ; then
+  create_systemd_service
+else
+  create_initd
+fi
+modify_modprobe_conf
+generate_alsaloop_conf
+if test -n "$pa"; then
+  modify_pa_conf
+fi
+restart_alsaloop
+
+clean
+
+safe_exit 0
diff --git a/SOURCES/alsa-info.sh b/SOURCES/alsa-info.sh
new file mode 100644
index 0000000..9d996aa
--- /dev/null
+++ b/SOURCES/alsa-info.sh
@@ -0,0 +1,930 @@
+#!/bin/bash
+
+SCRIPT_VERSION=0.4.62
+CHANGELOG="http://www.alsa-project.org/alsa-info.sh.changelog"
+
+#################################################################################
+#Copyright (C) 2007 Free Software Foundation.
+
+#This program is free software; you can redistribute it and/or modify
+#it under the terms of the GNU General Public License as published by
+#the Free Software Foundation; either version 2 of the License, or
+#(at your option) any later version.
+
+#This program is distributed in the hope that it will be useful,
+#but WITHOUT ANY WARRANTY; without even the implied warranty of
+#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#GNU General Public License for more details.
+
+#You should have received a copy of the GNU General Public License
+#along with this program; if not, write to the Free Software
+#Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+
+##################################################################################
+
+#The script was written for 2 main reasons:
+# 1. Remove the need for the devs/helpers to ask several questions before we can easily help the user.
+# 2. Allow newer/inexperienced ALSA users to give us all the info we need to help them.
+
+#Set the locale (this may or may not be a good idea.. let me know)
+export LC_ALL=C
+
+#Change the PATH variable, so we can run lspci (needed for some distros)
+PATH=$PATH:/bin:/sbin:/usr/bin:/usr/sbin
+BGTITLE="ALSA-Info v $SCRIPT_VERSION"
+PASTEBINKEY="C9cRIO8m/9y8Cs0nVs0FraRx7U0pHsuc"
+#Define some simple functions
+
+pbcheck(){
+	[[ $UPLOAD = "no" ]] && return
+
+	if [[ -z $PASTEBIN ]]; then
+		[[ $(ping -c1 www.alsa-project.org) ]] || KEEP_FILES="yes" UPLOAD="no" PBERROR="yes"
+	else
+		[[ $(ping -c1 www.pastebin.ca) ]] || KEEP_FILES="yes" UPLOAD="no" PBERROR="yes"
+	fi
+}
+
+update() {
+	SHFILE=`mktemp -t alsa-info.XXXXXXXXXX` || exit 1
+	wget -O $SHFILE "http://www.alsa-project.org/alsa-info.sh" >/dev/null 2>&1
+	REMOTE_VERSION=`grep SCRIPT_VERSION $SHFILE |head -n1 |sed 's/.*=//'`
+	if [ "$REMOTE_VERSION" != "$SCRIPT_VERSION" ]; then
+		if [[ -n $DIALOG ]]
+		then
+			OVERWRITE=
+			if [ -w $0 ]; then
+				dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to install it?\nNOTICE: The original file $0 will be overwritten!" 0 0
+				DIALOG_EXIT_CODE=$?
+				if [[ $DIALOG_EXIT_CODE = 0 ]]; then
+				  OVERWRITE=yes
+				fi
+			fi
+			if [ -z "$OVERWRITE" ]; then
+				dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to download it?" 0 0
+				DIALOG_EXIT_CODE=$?
+			fi
+			if [[ $DIALOG_EXIT_CODE = 0 ]]
+			then
+				echo "Newer version detected: $REMOTE_VERSION"
+				echo "To view the ChangeLog, please visit $CHANGELOG"
+				if [ "$OVERWRITE" = "yes" ]; then
+					cp $SHFILE $0
+					echo "ALSA-Info script has been updated to v $REMOTE_VERSION"
+					echo "Please re-run the script"
+					rm $SHFILE 2>/dev/null
+				else
+					echo "ALSA-Info script has been downloaded as $SHFILE."
+					echo "Please re-run the script from new location."
+				fi
+				exit
+			else
+				rm $SHFILE 2>/dev/null
+			fi
+		else
+			echo "Newer version detected: $REMOTE_VERSION"
+			echo "To view the ChangeLog, please visit $CHANGELOG"
+			if [ -w $0 ]; then
+				echo "The original file $0 will be overwritten!"
+				echo -n "If you do not like to proceed, press Ctrl-C now.." ; read inp
+				cp $SHFILE $0
+				echo "ALSA-Info script has been updated. Please re-run it."
+				rm $SHFILE 2>/dev/null
+			else
+				echo "ALSA-Info script has been downloaded $SHFILE."
+				echo "Please, re-run it from new location."
+			fi
+			exit
+		fi
+	else
+		rm $SHFILE 2>/dev/null
+	fi
+}
+
+cleanup() {
+	if [ -n "$TEMPDIR" -a "$KEEP_FILES" != "yes" ]; then
+		rm -rf "$TEMPDIR" 2>/dev/null
+	fi
+	test -n "$KEEP_OUTPUT" || rm -f "$NFILE"
+}
+
+
+withaplay() {
+        echo "!!Aplay/Arecord output" >> $FILE
+        echo "!!--------------------" >> $FILE
+        echo "" >> $FILE
+       	echo "APLAY" >> $FILE
+	echo "" >> $FILE 
+	aplay -l >> $FILE 2>&1
+        echo "" >> $FILE
+       	echo "ARECORD" >> $FILE
+	echo "" >> $FILE
+	arecord -l >> $FILE 2>&1
+	echo "" >> $FILE
+}
+
+withlsmod() {
+	echo "!!All Loaded Modules" >> $FILE
+	echo "!!------------------" >> $FILE
+	echo "" >> $FILE
+	lsmod |awk {'print $1'} >> $FILE
+	echo "" >> $FILE
+	echo "" >> $FILE
+}
+
+withamixer() {
+        echo "!!Amixer output" >> $FILE
+        echo "!!-------------" >> $FILE
+        echo "" >> $FILE
+	for i in `grep "]: " /proc/asound/cards | awk -F ' ' '{ print $1} '` ; do
+	CARD_NAME=`grep "^ *$i " $TEMPDIR/alsacards.tmp|awk {'print $2'}`
+	echo "!!-------Mixer controls for card $i $CARD_NAME]" >> $FILE
+	echo "" >>$FILE
+	amixer -c$i info>> $FILE 2>&1
+	amixer -c$i>> $FILE 2>&1
+        echo "" >> $FILE
+	done
+	echo "" >> $FILE
+}
+
+withalsactl() {
+	echo "!!Alsactl output" >> $FILE
+        echo "!!--------------" >> $FILE
+        echo "" >> $FILE
+        exe=""
+        if [ -x /usr/sbin/alsactl ]; then
+        	exe="/usr/sbin/alsactl"
+        fi
+        if [ -x /usr/local/sbin/alsactl ]; then
+        	exe="/usr/local/sbin/alsactl"
+        fi
+        if [ -z "$exe" ]; then
+        	exe=`whereis alsactl | cut -d ' ' -f 2`
+        fi
+	$exe -f $TEMPDIR/alsactl.tmp store
+	echo "--startcollapse--" >> $FILE
+	cat $TEMPDIR/alsactl.tmp >> $FILE
+	echo "--endcollapse--" >> $FILE
+	echo "" >> $FILE
+	echo "" >> $FILE
+}
+
+withdevices() {
+        echo "!!ALSA Device nodes" >> $FILE
+        echo "!!-----------------" >> $FILE
+        echo "" >> $FILE
+        ls -la /dev/snd/* >> $FILE
+        echo "" >> $FILE
+        echo "" >> $FILE
+}
+
+withconfigs() {
+if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]] || [[ -e $HOME/.asoundrc.asoundconf ]]
+then
+        echo "!!ALSA configuration files" >> $FILE
+        echo "!!------------------------" >> $FILE
+        echo "" >> $FILE
+
+        #Check for ~/.asoundrc
+        if [[ -e $HOME/.asoundrc ]]
+        then
+                echo "!!User specific config file (~/.asoundrc)" >> $FILE
+                echo "" >> $FILE
+                cat $HOME/.asoundrc >> $FILE
+                echo "" >> $FILE
+                echo "" >> $FILE
+        fi
+	#Check for .asoundrc.asoundconf (seems to be Ubuntu specific)
+	if [[ -e $HOME/.asoundrc.asoundconf ]]
+	then
+		echo "!!asoundconf-generated config file" >> $FILE
+		echo "" >> $FILE
+		cat $HOME/.asoundrc.asoundconf >> $FILE
+		echo "" >> $FILE
+		echo "" >> $FILE
+	fi
+        #Check for /etc/asound.conf
+        if [[ -e /etc/asound.conf ]]
+        then
+                echo "!!System wide config file (/etc/asound.conf)" >> $FILE
+                echo "" >> $FILE
+                cat /etc/asound.conf >> $FILE
+                echo "" >> $FILE
+                echo "" >> $FILE
+        fi
+fi
+}
+
+withsysfs() {
+    local i f
+    local printed=""
+    for i in /sys/class/sound/*; do
+	case "$i" in
+	    */hwC?D?)
+		if [ -f $i/init_pin_configs ]; then
+		    if [ -z "$printed" ]; then
+			echo "!!Sysfs Files" >> $FILE
+			echo "!!-----------" >> $FILE
+			echo "" >> $FILE
+		    fi
+		    for f in init_pin_configs driver_pin_configs user_pin_configs init_verbs hints; do
+			echo "$i/$f:" >> $FILE
+			cat $i/$f >> $FILE
+			echo >> $FILE
+		    done
+		    printed=yes
+		fi
+		;;
+	    esac
+    done
+    if [ -n "$printed" ]; then
+	echo "" >> $FILE
+    fi
+}
+
+withdmesg() {
+	echo "!!ALSA/HDA dmesg" >> $FILE
+	echo "!!--------------" >> $FILE
+	echo "" >> $FILE
+	dmesg | grep -C1 -E 'ALSA|HDA|HDMI|sound|hda.codec|hda.intel' >> $FILE
+	echo "" >> $FILE
+	echo "" >> $FILE
+}
+
+withall() {
+	withdevices
+	withconfigs
+	withaplay
+	withamixer
+	withalsactl
+	withlsmod
+	withsysfs
+	withdmesg
+}
+
+get_alsa_library_version() {
+	ALSA_LIB_VERSION=`grep VERSION_STR /usr/include/alsa/version.h 2>/dev/null|awk {'print $3'}|sed 's/"//g'`
+
+	if [ -z "$ALSA_LIB_VERSION" ]; then
+		if [ -f /etc/lsb-release ]; then
+			. /etc/lsb-release
+			case "$DISTRIB_ID" in
+				Ubuntu)
+					if which dpkg > /dev/null ; then
+						ALSA_LIB_VERSION=`dpkg -l libasound2 | tail -1 | awk '{print $3}' | cut -f 1 -d -`
+					fi
+
+					if [ "$ALSA_LIB_VERSION" = "<none>" ]; then
+						ALSA_LIB_VERSION=""
+					fi
+					return
+					;;
+				*)
+					return
+					;;
+			esac
+		elif [ -f /etc/debian_version ]; then
+			if which dpkg > /dev/null ; then
+				ALSA_LIB_VERSION=`dpkg -l libasound2 | tail -1 | awk '{print $3}' | cut -f 1 -d -`
+			fi
+
+			if [ "$ALSA_LIB_VERSION" = "<none>" ]; then
+				ALSA_LIB_VERSION=""
+			fi
+			return
+		fi
+	fi
+}
+
+
+#Run checks to make sure the programs we need are installed.
+LSPCI=$(which lspci 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null);
+TPUT=$(which tput 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null);
+DIALOG=$(which dialog 2>/dev/null | sed 's|^[^/]*||' 2>/dev/null);
+
+#Check to see if sysfs is enabled in the kernel. We'll need this later on
+SYSFS=$(mount |grep sysfs|awk {'print $3'});
+
+#Check modprobe config files for sound related options
+SNDOPTIONS=$(modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p')
+
+KEEP_OUTPUT=
+NFILE=""
+
+PASTEBIN=""
+WWWSERVICE="www.alsa-project.org"
+WELCOME="yes"
+PROCEED="yes"
+UPLOAD="ask"
+REPEAT=""
+while [ -z "$REPEAT" ]; do
+REPEAT="no"
+case "$1" in
+	--update|--help|--about)
+		WELCOME="no"
+		PROCEED="no"
+		;;
+	--upload)
+		UPLOAD="yes"
+		WELCOME="no"
+		;;
+	--no-upload)
+		UPLOAD="no"
+		WELCOME="no"
+		;;
+	--pastebin)
+		PASTEBIN="yes"
+		WWWSERVICE="pastebin"
+		;;
+	--no-dialog)
+		DIALOG=""
+		REPEAT=""
+		shift
+		;;
+	--stdout)
+		DIALOG=""
+		UPLOAD="no"
+		WELCOME="no"
+		TOSTDOUT="yes"
+		;;
+esac
+done
+
+
+#Script header output.
+if [ "$WELCOME" = "yes" ]; then
+greeting_message="\
+
+This script visits the following commands/files to collect diagnostic
+information about your ALSA installation and sound related hardware.
+
+  dmesg
+  lspci
+  lsmod
+  aplay
+  amixer
+  alsactl
+  /proc/asound/
+  /sys/class/sound/
+  ~/.asoundrc (etc.)
+
+See '$0 --help' for command line options.
+"
+if [ -n "$DIALOG" ]; then
+	dialog  --backtitle "$BGTITLE" \
+		--title "ALSA-Info script v $SCRIPT_VERSION" \
+		--msgbox "$greeting_message" 20 80
+else
+	echo "ALSA Information Script v $SCRIPT_VERSION"
+	echo "--------------------------------"
+	echo "$greeting_message"
+fi # dialog
+fi # WELCOME
+
+#Set the output file
+TEMPDIR=`mktemp -t -d alsa-info.XXXXXXXXXX` || exit 1
+FILE="$TEMPDIR/alsa-info.txt"
+if [ -z "$NFILE" ]; then
+	NFILE=`mktemp -t alsa-info.txt.XXXXXXXXXX` || exit 1
+fi
+
+trap cleanup 0
+
+if [ "$PROCEED" = "yes" ]; then
+
+if [ -z "$LSPCI" ]; then
+	echo "This script requires lspci. Please install it, and re-run this script."
+	exit 0
+fi
+
+#Fetch the info and store in temp files/variables
+DISTRO=`grep -ihs "buntu\|SUSE\|Fedora\|PCLinuxOS\|MEPIS\|Mandriva\|Debian\|Damn\|Sabayon\|Slackware\|KNOPPIX\|Gentoo\|Zenwalk\|Mint\|Kubuntu\|FreeBSD\|Puppy\|Freespire\|Vector\|Dreamlinux\|CentOS\|Arch\|Xandros\|Elive\|SLAX\|Red\|BSD\|KANOTIX\|Nexenta\|Foresight\|GeeXboX\|Frugalware\|64\|SystemRescue\|Novell\|Solaris\|BackTrack\|KateOS\|Pardus" /etc/{issue,*release,*version}`
+KERNEL_VERSION=`uname -r`
+KERNEL_PROCESSOR=`uname -p`
+KERNEL_MACHINE=`uname -m`
+KERNEL_OS=`uname -o`
+[[ `uname -v | grep SMP`  ]] && KERNEL_SMP="Yes" || KERNEL_SMP="No" 
+ALSA_DRIVER_VERSION=`cat /proc/asound/version |head -n1|awk {'print $7'} |sed 's/\.$//'`
+get_alsa_library_version
+ALSA_UTILS_VERSION=`amixer -v |awk {'print $3'}`
+VENDOR_ID=`lspci -vn | grep 040[1-3] | awk -F':' '{print $3}'| awk {'print substr($0, 2);}' >$TEMPDIR/vendor_id.tmp`
+DEVICE_ID=`lspci -vn | grep 040[1-3] | awk -F':' '{print $4}'| awk {'print $1'} >$TEMPDIR/device_id.tmp`
+LAST_CARD=$((`grep "]: " /proc/asound/cards | wc -l` - 1 ))
+
+ESDINST=$(which esd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
+PAINST=$(which pulseaudio 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
+ARTSINST=$(which artsd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
+JACKINST=$(which jackd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
+ROARINST=$(which roard 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
+DMIDECODE=$(which dmidecode 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
+
+#Check for DMI data
+if [ -d /sys/class/dmi/id ]; then
+    # No root privileges are required when using sysfs method
+    DMI_SYSTEM_MANUFACTURER=$(cat /sys/class/dmi/id/sys_vendor 2>/dev/null)
+    DMI_SYSTEM_PRODUCT_NAME=$(cat /sys/class/dmi/id/product_name 2>/dev/null)
+    DMI_SYSTEM_PRODUCT_VERSION=$(cat /sys/class/dmi/id/product_version 2>/dev/null)
+    DMI_SYSTEM_FIRMWARE_VERSION=$(cat /sys/class/dmi/id/bios_version 2>/dev/null)
+elif [ -x $DMIDECODE ]; then
+    DMI_SYSTEM_MANUFACTURER=$($DMIDECODE -s system-manufacturer 2>/dev/null)
+    DMI_SYSTEM_PRODUCT_NAME=$($DMIDECODE -s system-product-name 2>/dev/null)
+    DMI_SYSTEM_PRODUCT_VERSION=$($DMIDECODE -s system-version 2>/dev/null)
+    DMI_SYSTEM_FIRMWARE_VERSION=$($DMIDECODE -s bios-version 2>/dev/null)
+fi
+
+cat /proc/asound/modules 2>/dev/null|awk {'print $2'}>$TEMPDIR/alsamodules.tmp
+cat /proc/asound/cards >$TEMPDIR/alsacards.tmp
+lspci |grep -i "multi\|audio">$TEMPDIR/lspci.tmp
+
+#Check for HDA-Intel cards codec#*
+cat /proc/asound/card*/codec\#* > $TEMPDIR/alsa-hda-intel.tmp 2> /dev/null
+
+#Check for AC97 cards codec
+cat /proc/asound/card*/codec97\#0/ac97\#0-0 > $TEMPDIR/alsa-ac97.tmp 2> /dev/null
+cat /proc/asound/card*/codec97\#0/ac97\#0-0+regs > $TEMPDIR/alsa-ac97-regs.tmp 2> /dev/null
+
+#Check for USB mixer setup
+cat /proc/asound/card*/usbmixer > $TEMPDIR/alsa-usbmixer.tmp 2> /dev/null
+
+#Fetch the info, and put it in $FILE in a nice readable format.
+if [[ -z $PASTEBIN ]]; then
+echo "upload=true&script=true&cardinfo=" > $FILE
+else
+echo "name=$USER&type=33&description=/tmp/alsa-info.txt&expiry=&s=Submit+Post&content=" > $FILE
+fi
+echo "!!################################" >> $FILE
+echo "!!ALSA Information Script v $SCRIPT_VERSION" >> $FILE
+echo "!!################################" >> $FILE
+echo "" >> $FILE
+echo "!!Script ran on: `LANG=C TZ=UTC date`" >> $FILE
+echo "" >> $FILE
+echo "" >> $FILE
+echo "!!Linux Distribution" >> $FILE
+echo "!!------------------" >> $FILE
+echo "" >> $FILE
+echo $DISTRO >> $FILE
+echo "" >> $FILE
+echo "" >> $FILE
+echo "!!DMI Information" >> $FILE
+echo "!!---------------" >> $FILE
+echo "" >> $FILE
+echo "Manufacturer:      $DMI_SYSTEM_MANUFACTURER" >> $FILE
+echo "Product Name:      $DMI_SYSTEM_PRODUCT_NAME" >> $FILE
+echo "Product Version:   $DMI_SYSTEM_PRODUCT_VERSION" >> $FILE
+echo "Firmware Version:  $DMI_SYSTEM_FIRMWARE_VERSION" >> $FILE
+echo "" >> $FILE
+echo "" >> $FILE
+echo "!!Kernel Information" >> $FILE
+echo "!!------------------" >> $FILE
+echo "" >> $FILE
+echo "Kernel release:    $KERNEL_VERSION" >> $FILE
+echo "Operating System:  $KERNEL_OS" >> $FILE
+echo "Architecture:      $KERNEL_MACHINE" >> $FILE
+echo "Processor:         $KERNEL_PROCESSOR" >> $FILE
+echo "SMP Enabled:       $KERNEL_SMP" >> $FILE
+echo "" >> $FILE
+echo "" >> $FILE
+echo "!!ALSA Version" >> $FILE
+echo "!!------------" >> $FILE
+echo "" >> $FILE
+echo "Driver version:     $ALSA_DRIVER_VERSION" >> $FILE
+echo "Library version:    $ALSA_LIB_VERSION" >> $FILE
+echo "Utilities version:  $ALSA_UTILS_VERSION" >> $FILE
+echo "" >> $FILE
+echo "" >> $FILE
+echo "!!Loaded ALSA modules" >> $FILE
+echo "!!-------------------" >> $FILE
+echo "" >> $FILE
+cat $TEMPDIR/alsamodules.tmp >> $FILE
+echo "" >> $FILE
+echo "" >> $FILE
+echo "!!Sound Servers on this system" >> $FILE
+echo "!!----------------------------" >> $FILE
+echo "" >> $FILE
+if [[ -n $PAINST ]];then
+[[ `pgrep '^(.*/)?pulseaudio$'` ]] && PARUNNING="Yes" || PARUNNING="No"
+echo "Pulseaudio:" >> $FILE
+echo "      Installed - Yes ($PAINST)" >> $FILE
+echo "      Running - $PARUNNING" >> $FILE
+echo "" >> $FILE
+fi
+if [[ -n $ESDINST ]];then
+[[ `pgrep '^(.*/)?esd$'` ]] && ESDRUNNING="Yes" || ESDRUNNING="No"
+echo "ESound Daemon:" >> $FILE
+echo "      Installed - Yes ($ESDINST)" >> $FILE
+echo "      Running - $ESDRUNNING" >> $FILE
+echo "" >> $FILE
+fi
+if [[ -n $ARTSINST ]];then
+[[ `pgrep '^(.*/)?artsd$'` ]] && ARTSRUNNING="Yes" || ARTSRUNNING="No"
+echo "aRts:" >> $FILE
+echo "      Installed - Yes ($ARTSINST)" >> $FILE
+echo "      Running - $ARTSRUNNING" >> $FILE
+echo "" >> $FILE
+fi
+if [[ -n $JACKINST ]];then
+[[ `pgrep '^(.*/)?jackd$'` ]] && JACKRUNNING="Yes" || JACKRUNNING="No"
+echo "Jack:" >> $FILE
+echo "      Installed - Yes ($JACKINST)" >> $FILE
+echo "      Running - $JACKRUNNING" >> $FILE
+echo "" >> $FILE
+fi
+if [[ -n $ROARINST ]];then
+[[ `pgrep '^(.*/)?roard$'` ]] && ROARRUNNING="Yes" || ROARRUNNING="No"
+echo "RoarAudio:" >> $FILE
+echo "      Installed - Yes ($ROARINST)" >> $FILE
+echo "      Running - $ROARRUNNING" >> $FILE
+echo "" >> $FILE
+fi
+if [[ -z "$PAINST" && -z "$ESDINST" && -z "$ARTSINST" && -z "$JACKINST" && -z "$ROARINST" ]];then
+echo "No sound servers found." >> $FILE
+echo "" >> $FILE
+fi
+echo "" >> $FILE
+echo "!!Soundcards recognised by ALSA" >> $FILE
+echo "!!-----------------------------" >> $FILE
+echo "" >> $FILE
+cat $TEMPDIR/alsacards.tmp >> $FILE
+echo "" >> $FILE
+echo "" >> $FILE
+echo "!!PCI Soundcards installed in the system" >> $FILE
+echo "!!--------------------------------------" >> $FILE
+echo "" >> $FILE
+cat $TEMPDIR/lspci.tmp >> $FILE
+echo "" >> $FILE
+echo "" >> $FILE
+echo "!!Advanced information - PCI Vendor/Device/Subsystem ID's" >> $FILE
+echo "!!-------------------------------------------------------" >> $FILE
+echo "" >> $FILE
+lspci -vvn |grep -A1 040[1-3] >> $FILE
+echo "" >> $FILE
+echo "" >> $FILE
+
+if [ "$SNDOPTIONS" ]
+then
+echo "!!Modprobe options (Sound related)" >> $FILE
+echo "!!--------------------------------" >> $FILE
+echo "" >> $FILE
+modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p' >> $FILE
+echo "" >> $FILE
+echo "" >> $FILE
+fi
+
+if [ -d "$SYSFS" ]
+then
+echo "!!Loaded sound module options" >> $FILE
+echo "!!---------------------------" >> $FILE
+echo "" >> $FILE
+for mod in `cat /proc/asound/modules|awk {'print $2'}`;do
+echo "!!Module: $mod" >> $FILE
+for params in `echo $SYSFS/module/$mod/parameters/*`; do
+	echo -ne "\t";
+	echo "$params : `cat $params`" | sed 's:.*/::';
+done >> $FILE
+echo "" >> $FILE
+done
+echo "" >> $FILE
+fi
+
+if [ -s "$TEMPDIR/alsa-hda-intel.tmp" ]; then
+	echo "!!HDA-Intel Codec information" >> $FILE
+	echo "!!---------------------------" >> $FILE
+	echo "--startcollapse--" >> $FILE
+	echo "" >> $FILE
+	cat $TEMPDIR/alsa-hda-intel.tmp >> $FILE
+	echo "--endcollapse--" >> $FILE
+	echo "" >> $FILE
+	echo "" >> $FILE
+fi
+
+if [ -s "$TEMPDIR/alsa-ac97.tmp" ]; then
+        echo "!!AC97 Codec information" >> $FILE
+        echo "!!----------------------" >> $FILE
+        echo "--startcollapse--" >> $FILE
+        echo "" >> $FILE
+        cat $TEMPDIR/alsa-ac97.tmp >> $FILE
+        echo "" >> $FILE
+        cat $TEMPDIR/alsa-ac97-regs.tmp >> $FILE
+        echo "--endcollapse--" >> $FILE
+	echo "" >> $FILE
+	echo "" >> $FILE
+fi
+
+if [ -s "$TEMPDIR/alsa-usbmixer.tmp" ]; then
+        echo "!!USB Mixer information" >> $FILE
+        echo "!!---------------------" >> $FILE
+        echo "--startcollapse--" >> $FILE
+        echo "" >> $FILE
+        cat $TEMPDIR/alsa-usbmixer.tmp >> $FILE
+        echo "--endcollapse--" >> $FILE
+	echo "" >> $FILE
+	echo "" >> $FILE
+fi
+
+#If no command line options are specified, then run as though --with-all was specified
+if [ -z "$1" ]; then
+	update
+	withall
+	pbcheck	
+fi
+
+fi # proceed
+
+#loop through command line arguments, until none are left.
+if [ -n "$1" ]; then
+	until [ -z "$1" ]
+	do
+	case "$1" in
+		--pastebin)
+		        update
+			withall
+        		pbcheck
+			;;
+		--update)
+			update
+			exit
+			;;
+		--upload)
+			UPLOAD="yes"
+			withall
+			;;
+		--no-upload)
+			UPLOAD="no"
+			withall
+			;;
+		--output)
+			shift
+			NFILE="$1"
+			KEEP_OUTPUT="yes"
+			;;
+		--debug)
+			echo "Debugging enabled. $FILE and $TEMPDIR will not be deleted"
+			KEEP_FILES="yes"
+			echo ""
+			withall
+			;;
+		--with-all)
+			withall
+			;;
+		--with-aplay)
+			withaplay
+			;;
+		--with-amixer)
+			withamixer
+			;;
+		--with-alsactl)
+			withalsactl
+			;;
+		--with-devices)
+			withdevices
+			;;
+		--with-dmesg)
+			withdmesg
+			;;
+		--with-configs)
+			if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]]
+			then
+				echo "!!ALSA configuration files" >> $FILE
+				echo "!!------------------------" >> $FILE
+				echo "" >> $FILE
+
+				#Check for ~/.asoundrc
+				if [[ -e $HOME/.asoundrc ]]
+				then
+					echo "!!User specific config file ($HOME/.asoundrc)" >> $FILE
+					echo "" >> $FILE
+					cat $HOME/.asoundrc >> $FILE
+					echo "" >> $FILE
+					echo "" >> $FILE
+				fi
+
+				#Check for /etc/asound.conf
+				if [[ -e /etc/asound.conf ]]
+				then
+					echo "!!System wide config file (/etc/asound.conf)" >> $FILE
+					echo "" >> $FILE
+					cat /etc/asound.conf >> $FILE
+					echo "" >> $FILE
+					echo "" >> $FILE
+				fi
+			fi
+			;;
+		--stdout)
+			UPLOAD="no"
+			withall
+			cat $FILE
+			rm $FILE
+			;;
+		--about)
+			echo "Written/Tested by the following users of #alsa on irc.freenode.net:"
+			echo ""
+			echo "	wishie - Script author and developer / Testing"
+			echo "	crimsun - Various script ideas / Testing"
+			echo "	gnubien - Various script ideas / Testing"
+			echo "	GrueMaster - HDA Intel specific items / Testing"
+			echo "	olegfink - Script update function"
+			echo "  TheMuso - display to stdout functionality"
+			exit 0
+			;;
+		*)
+			echo "alsa-info.sh version $SCRIPT_VERSION"
+			echo ""
+			echo "Available options:"
+			echo "	--with-aplay (includes the output of aplay -l)"
+			echo "	--with-amixer (includes the output of amixer)"
+			echo "	--with-alsactl (includes the output of alsactl)"
+			echo "	--with-configs (includes the output of ~/.asoundrc and"
+			echo "	    /etc/asound.conf if they exist)" 
+			echo "	--with-devices (shows the device nodes in /dev/snd/)"
+			echo "	--with-dmesg (shows the ALSA/HDA kernel messages)"
+			echo ""
+			echo "	--output FILE (specify the file to output for no-upload mode)"
+			echo "	--update (check server for script updates)"
+			echo "	--upload (upload contents to remote server)"
+			echo "	--no-upload (do not upload contents to remote server)"
+			echo "	--pastebin (use http://pastebin.ca) as remote server"
+			echo "	    instead www.alsa-project.org"
+			echo "	--stdout (print alsa information to standard output"
+			echo "	    instead of a file)"
+			echo "	--about (show some information about the script)"
+			echo "	--debug (will run the script as normal, but will not"
+			echo "	     delete $FILE)"
+			exit 0
+			;;
+	esac
+	shift 1
+	done
+fi
+
+if [ "$PROCEED" = "no" ]; then
+	exit 1
+fi
+
+if [ "$UPLOAD" = "ask" ]; then
+	if [ -n "$DIALOG" ]; then
+		dialog --backtitle "$BGTITLE" --title "Information collected" --yes-label " UPLOAD / SHARE " --no-label " SAVE LOCALLY " --defaultno --yesno "\n\nAutomatically upload ALSA information to $WWWSERVICE?" 10 80
+		DIALOG_EXIT_CODE=$?
+		if [ $DIALOG_EXIT_CODE != 0 ]; then
+			UPLOAD="no"
+		else
+			UPLOAD="yes"
+		fi
+	else
+		echo -n "Automatically upload ALSA information to $WWWSERVICE? [y/N] : "
+		read -e CONFIRM
+		if [ "$CONFIRM" != "y" ]; then
+			UPLOAD="no"
+		else
+			UPLOAD="yes"
+		fi
+	fi
+
+fi
+
+if [ "$UPLOAD" = "no" ]; then
+
+	if [ -z "$TOSTDOUT" ]; then
+		mv -f $FILE $NFILE || exit 1
+		KEEP_OUTPUT="yes"
+	fi
+
+	if [[ -n $DIALOG ]]
+	then
+		if [[ -n $PBERROR ]]; then
+			dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "An error occurred while contacting the $WWWSERVICE.\n Your information was NOT automatically uploaded.\n\nYour ALSA information is in $NFILE" 10 100
+		else
+			dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "\n\nYour ALSA information is in $NFILE" 10 60
+		fi
+	else
+		echo
+
+		if [[ -n $PBERROR ]]; then
+			echo "An error occurred while contacting the $WWWSERVICE."
+			echo "Your information was NOT automatically uploaded."
+			echo ""
+			echo "Your ALSA information is in $NFILE"
+			echo ""
+		else
+			if [ -z "$TOSTDOUT" ]; then
+				echo ""
+				echo "Your ALSA information is in $NFILE"
+				echo ""
+			fi
+		fi
+	fi
+
+	exit
+
+fi # UPLOAD
+
+#Test that wget is installed, and supports --post-file. Upload $FILE if it does, and prompt user to upload file if it doesnt. 
+if
+WGET=$(which wget 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null); [[ -n "${WGET}" ]] && [[ -x "${WGET}" ]] && [[ `wget --help |grep post-file` ]]
+then
+
+if [[ -n $DIALOG ]]
+then
+
+if [[ -z $PASTEBIN ]]; then
+	wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://www.alsa-project.org/cardinfo-db/" &>$TEMPDIR/wget.tmp || echo "Upload failed; exit"
+	{ for i in 10 20 30 40 50 60 70 80 90; do
+		echo $i
+		sleep 0.2
+	done
+	echo; } |dialog --backtitle "$BGTITLE" --guage "Uploading information to www.alsa-project.org ..." 6 70 0
+else
+	wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://pastebin.ca/quiet-paste.php?api=$PASTEBINKEY&encrypt=t&encryptpw=blahblah" &>$TEMPDIR/wget.tmp || echo "Upload failed; exit"
+	{ for i in 10 20 30 40 50 60 70 80 90; do
+		echo $i
+		sleep 0.2
+	done
+	echo; } |dialog --backtitle "$BGTITLE" --guage "Uploading information to www.pastebin.ca ..." 6 70 0
+fi
+
+dialog --backtitle "$BGTITLE" --title "Information uploaded" --yesno "Would you like to see the uploaded information?" 5 100 
+DIALOG_EXIT_CODE=$?
+if [ $DIALOG_EXIT_CODE = 0 ]; then
+	grep -v "alsa-info.txt" $FILE >$TEMPDIR/uploaded.txt
+	dialog --backtitle "$BGTITLE" --textbox $TEMPDIR/uploaded.txt 0 0
+fi
+
+clear
+
+# no dialog
+else
+
+if [[ -z $PASTEBIN ]]; then
+	echo -n "Uploading information to www.alsa-project.org ... " 
+	wget -O - --tries=5 --timeout=60 --post-file=$FILE http://www.alsa-project.org/cardinfo-db/ &>$TEMPDIR/wget.tmp &
+else
+	echo -n "Uploading information to www.pastebin.ca ... " 
+	wget -O - --tries=5 --timeout=60 --post-file=$FILE http://pastebin.ca/quiet-paste.php?api=$PASTEBINKEY &>$TEMPDIR/wget.tmp &
+fi
+
+#Progess spinner for wget transfer.
+i=1
+sp="/-\|"
+echo -n ' '
+while pgrep wget &>/dev/null
+do
+	echo -en "\b${sp:i++%${#sp}:1}"
+done
+
+echo -e "\b Done!"
+echo ""
+
+fi #dialog
+
+#See if tput is available, and use it if it is.	
+if [ -n "$TPUT" ]; then
+	if [[ -z $PASTEBIN ]]; then
+		FINAL_URL=`tput setaf 1; grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2 ; tput sgr0`
+	else
+		FINAL_URL=`tput setaf 1; grep "SUCCESS:" $TEMPDIR/wget.tmp | sed -n 's/.*\:\([0-9]\+\).*/http:\/\/pastebin.ca\/\1/p';tput sgr0`
+	fi
+else
+	if [[ -z $PASTEBIN ]]; then
+		FINAL_URL=`grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2`
+	else
+		FINAL_URL=`grep "SUCCESS:" $TEMPDIR/wget.tmp | sed -n 's/.*\:\([0-9]\+\).*/http:\/\/pastebin.ca\/\1/p'`
+	fi
+fi
+
+# Output the URL of the uploaded file.	
+echo "Your ALSA information is located at $FINAL_URL"
+echo "Please inform the person helping you."
+echo ""
+
+# We couldnt find a suitable wget, so tell the user to upload manually.
+else
+	mv -f $FILE $NFILE || exit 1
+	KEEP_OUTPUT="yes"
+	if [[ -z $DIALOG ]]
+	then
+		if [[ -z $PASTEBIN ]]; then
+		echo ""
+		echo "Could not automatically upload output to http://www.alsa-project.org"
+		echo "Possible reasons are:"
+		echo "    1. Couldnt find 'wget' in your PATH"
+		echo "    2. Your version of wget is less than 1.8.2"
+		echo ""
+		echo "Please manually upload $NFILE to http://www.alsa-project.org/cardinfo-db/ and submit your post."
+		echo ""
+		else
+		echo ""
+		echo "Could not automatically upload output to http://www.pastebin.ca"
+		echo "Possible reasons are:"
+		echo "    1. Couldnt find 'wget' in your PATH"
+		echo "    2. Your version of wget is less than 1.8.2"
+		echo ""
+		echo "Please manually upload $NFILE to http://www.pastebin.ca/upload.php and submit your post."
+		echo ""
+		fi
+	else
+		if [[ -z $PASTEBIN ]]; then
+			dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://www.alsa-project.org.\nPossible reasons are:\n\n    1. Couldn't find 'wget' in your PATH\n    2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to http://www.alsa-project,org/cardinfo-db/ and submit your post." 25 100
+		else
+			dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://www.pastebin.ca.\nPossible reasons are:\n\n    1. Couldn't find 'wget' in your PATH\n    2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to http://www.pastebin.ca/upload.php and submit your post." 25 100
+		fi
+	fi
+fi
diff --git a/SOURCES/alsa-restore.service b/SOURCES/alsa-restore.service
new file mode 100644
index 0000000..4e9466b
--- /dev/null
+++ b/SOURCES/alsa-restore.service
@@ -0,0 +1,17 @@
+#
+# Note that two different ALSA card state management schemes exist and they
+# can be switched using a file exist check - /etc/alsa/state-daemon.conf .
+#
+
+[Unit]
+Description=Restore Sound Card State
+ConditionPathExists=!/etc/alsa/state-daemon.conf
+DefaultDependencies=no
+After=alsa-state.service
+Before=shutdown.target
+Conflicts=shutdown.target
+
+[Service]
+Type=oneshot
+ExecStart=-/sbin/alsactl -E ALSA_CONFIG_PATH=/etc/alsa/alsactl.conf --initfile=/lib/alsa/init/00main restore
+StandardOutput=syslog
diff --git a/SOURCES/alsa-state.service b/SOURCES/alsa-state.service
new file mode 100644
index 0000000..9b906de
--- /dev/null
+++ b/SOURCES/alsa-state.service
@@ -0,0 +1,17 @@
+#
+# Note that two different ALSA card state management schemes exist and they
+# can be switched using a file exist check - /etc/alsa/state-daemon.conf .
+#
+
+[Unit]
+Description=Manage Sound Card State (restore and store)
+ConditionPathExists=/etc/alsa/state-daemon.conf
+DefaultDependencies=no
+After=sysinit.target
+Before=shutdown.target
+Conflicts=shutdown.target
+
+[Service]
+Type=simple
+ExecStart=-/usr/sbin/alsactl -s -n 19 -c -E ALSA_CONFIG_PATH=/etc/alsa/alsactl.conf --initfile=/lib/alsa/init/00main rdaemon
+ExecStop=-/usr/sbin/alsactl -s kill save_and_quit
diff --git a/SOURCES/alsa-store.service b/SOURCES/alsa-store.service
new file mode 100644
index 0000000..87a6cb1
--- /dev/null
+++ b/SOURCES/alsa-store.service
@@ -0,0 +1,15 @@
+#
+# Note that two different ALSA card state management schemes exist and they
+# can be switched using a file exist check - /etc/alsa/state-daemon.conf .
+#
+
+[Unit]
+Description=Store Sound Card State
+ConditionPathExists=!/etc/alsa/state-daemon.conf
+DefaultDependencies=no
+Before=shutdown.target
+
+[Service]
+Type=oneshot
+ExecStart=/sbin/alsactl -E ALSA_CONFIG_PATH=/etc/alsa/alsactl.conf store
+StandardOutput=syslog
diff --git a/SOURCES/alsa.rules b/SOURCES/alsa.rules
new file mode 100644
index 0000000..6a4a0c3
--- /dev/null
+++ b/SOURCES/alsa.rules
@@ -0,0 +1,8 @@
+ACTION=="add", SUBSYSTEM=="sound", KERNEL=="controlC*", KERNELS!="card*", GOTO="alsa_restore_go"
+GOTO="alsa_restore_end"
+
+LABEL="alsa_restore_go"
+TEST!="/etc/alsa/state-daemon.conf", RUN+="/sbin/alsactl -E ALSA_CONFIG_PATH=/etc/alsa/alsactl.conf --initfile=/lib/alsa/init/00main restore /dev/$name"
+TEST=="/etc/alsa/state-daemon.conf", RUN+="/sbin/alsactl -E ALSA_CONFIG_PATH=/etc/alsa/alsactl.conf --initfile=/lib/alsa/init/00main nrestore /dev/$name"
+
+LABEL="alsa_restore_end"
diff --git a/SOURCES/alsactl.conf b/SOURCES/alsactl.conf
new file mode 100644
index 0000000..71f0d80
--- /dev/null
+++ b/SOURCES/alsactl.conf
@@ -0,0 +1,14 @@
+#
+# ALSA library configuration file for alsactl tool
+# (/usr/share/alsa tree is not necessary for alsactl)
+#
+
+ctl.hw {
+	@args [ CARD ]
+	@args.CARD {
+		type string
+		default "0"
+	}
+	type hw
+	card $CARD
+}
diff --git a/SOURCES/alsaloop-syslog.patch b/SOURCES/alsaloop-syslog.patch
new file mode 100644
index 0000000..d36e5f3
--- /dev/null
+++ b/SOURCES/alsaloop-syslog.patch
@@ -0,0 +1,64 @@
+diff --git a/alsaloop/alsaloop.c b/alsaloop/alsaloop.c
+index 20150dd..3b20682 100644
+--- a/alsaloop/alsaloop.c
++++ b/alsaloop/alsaloop.c
+@@ -195,6 +195,7 @@ void help(void)
+ "-w,--workaround use workaround (serialopen)\n"
+ "-U,--xrun      xrun profiling\n"
+ "-W,--wake      process wake timeout in ms\n"
++"-z,--syslog    use syslog for errors\n"
+ );
+ 	printf("\nRecognized sample formats are:");
+ 	for (k = 0; k < SND_PCM_FORMAT_LAST; ++k) {
+@@ -334,6 +335,14 @@ static int add_oss_mixers(struct loopback *loop,
+ 	return 0;
+ }
+ 
++static void enable_syslog(void)
++{
++	if (!use_syslog) {
++		use_syslog = 1;
++		openlog("alsaloop", LOG_NDELAY|LOG_PID, LOG_DAEMON);
++	}
++}
++
+ static int parse_config_file(const char *file, snd_output_t *output);
+ 
+ static int parse_config(int argc, char *argv[], snd_output_t *output,
+@@ -368,6 +377,7 @@ static int parse_config(int argc, char *argv[], snd_output_t *output,
+ 		{"ossmixer", 1, NULL, 'O'},
+ 		{"workaround", 1, NULL, 'w'},
+ 		{"xrun", 0, NULL, 'U'},
++		{"syslog", 0, NULL, 'z'},
+ 		{NULL, 0, NULL, 0},
+ 	};
+ 	int err, morehelp;
+@@ -405,7 +415,7 @@ static int parse_config(int argc, char *argv[], snd_output_t *output,
+ 	while (1) {
+ 		int c;
+ 		if ((c = getopt_long(argc, argv,
+-				"hdg:P:C:X:Y:l:t:F:f:c:r:s:benvA:S:a:m:T:O:w:UW:",
++				"hdg:P:C:X:Y:l:t:F:f:c:r:s:benvA:S:a:m:T:O:w:UW:z",
+ 				long_option, NULL)) < 0)
+ 			break;
+ 		switch (c) {
+@@ -417,8 +427,7 @@ static int parse_config(int argc, char *argv[], snd_output_t *output,
+ 			break;
+ 		case 'd':
+ 			daemonize = 1;
+-			use_syslog = 1;
+-			openlog("alsaloop", LOG_NDELAY|LOG_PID, LOG_DAEMON);
++			enable_syslog();
+ 			break;
+ 		case 'P':
+ 			arg_pdevice = strdup(optarg);
+@@ -561,6 +570,9 @@ static int parse_config(int argc, char *argv[], snd_output_t *output,
+ 			if (cmdline)
+ 				arg_default_wake = arg_wake;
+ 			break;
++		case 'z':
++			enable_syslog();
++			break;
+ 		}
+ 	}
+ 
diff --git a/SOURCES/alsaunmute b/SOURCES/alsaunmute
new file mode 100755
index 0000000..3f772ea
--- /dev/null
+++ b/SOURCES/alsaunmute
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+exec /sbin/alsactl \
+  -E ALSA_CONFIG_PATH=/etc/alsa/alsactl.conf \
+  --initfile=/lib/alsa/init/00main \
+  init
diff --git a/SOURCES/alsaunmute.1 b/SOURCES/alsaunmute.1
new file mode 100644
index 0000000..057ae50
--- /dev/null
+++ b/SOURCES/alsaunmute.1
@@ -0,0 +1,28 @@
+.TH ALSAUNMUTE 1 "21 April 2010"
+.SH NAME
+alsaunmute \- a simple script to initialize ALSA sound devices
+
+.SH DESCRIPTION
+\fBalsaunmute\fP is a shell script which runs the \fBalsactl(1)\fP
+utility with \fIinit\fP argument (see the script for details).
+
+.SH OPTIONS
+None
+
+.SS
+Example:
+\fBalsaunmute\fR
+
+.SH SEE ALSO
+\fB
+alsactl(1),
+alsamixer(1),
+amixer(1)
+\fP
+
+.SH BUGS 
+None known.
+
+.SH AUTHOR
+\fBalsaunmute\fP is by Jaroslav Kysela <perex@perex.cz>
+
diff --git a/SPECS/alsa-utils.spec b/SPECS/alsa-utils.spec
new file mode 100644
index 0000000..bf35c2a
--- /dev/null
+++ b/SPECS/alsa-utils.spec
@@ -0,0 +1,491 @@
+%define   baseversion	1.0.27
+%define   fixversion	.2
+
+Summary: Advanced Linux Sound Architecture (ALSA) utilities
+Name:    alsa-utils
+Version: %{baseversion}%{?fixversion}
+Release: 3%{?dist}
+License: GPLv2+
+Group:   Applications/Multimedia
+URL:     http://www.alsa-project.org/
+Source:  ftp://ftp.alsa-project.org/pub/utils/alsa-utils-%{version}.tar.bz2
+Source4: alsaunmute
+Source5: alsaunmute.1
+Source6: alsa-info.sh
+Source7: alsa-delay
+Source10: alsa.rules
+Source11: alsactl.conf
+Source20: alsa-restore.service
+Source21: alsa-store.service
+Source22: alsa-state.service
+Patch0:	alsaloop-syslog.patch
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+BuildRequires: alsa-lib-devel >= %{baseversion}
+BuildRequires: libsamplerate-devel
+BuildRequires: ncurses-devel
+BuildRequires: gettext-devel
+BuildRequires: xmlto
+BuildRequires: systemd-units >= 39-2
+Conflicts: udev <= 179-2
+# use latest alsa-lib - the executables in this package requires latest API
+Requires: alsa-lib%{?_isa} >= %{baseversion}, systemd-units >= 39-2
+Conflicts: filesystem < 3
+
+%description
+This package contains command line utilities for the Advanced Linux Sound
+Architecture (ALSA).
+
+%prep
+%setup -q -n %{name}-%{version}
+%patch0 -p1 -b .alsaloop-syslog
+
+%build
+%configure CFLAGS="$RPM_OPT_FLAGS -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64" --disable-alsaconf \
+   --with-udev-rules-dir=%{_prefix}/lib/udev/rules.d \
+   --with-systemdsystemunitdir=%{_unitdir}
+%{__make} %{?_smp_mflags}
+%{__cp} %{SOURCE4} .
+
+%install
+make install DESTDIR=$RPM_BUILD_ROOT
+%find_lang %{name}
+
+# Install ALSA udev rules
+mkdir -p $RPM_BUILD_ROOT/%{_prefix}/lib/udev/rules.d
+install -p -m 644 %{SOURCE10} $RPM_BUILD_ROOT/%{_prefix}/lib/udev/rules.d/90-alsa-restore.rules
+mkdir -p $RPM_BUILD_ROOT/%{_unitdir}
+install -p -m 644 %{SOURCE20} $RPM_BUILD_ROOT/%{_unitdir}/alsa-restore.service
+install -p -m 644 %{SOURCE21} $RPM_BUILD_ROOT/%{_unitdir}/alsa-store.service
+install -p -m 644 %{SOURCE22} $RPM_BUILD_ROOT/%{_unitdir}/alsa-state.service
+
+# Install support utilities
+mkdir -p -m755 $RPM_BUILD_ROOT/%{_bindir}
+install -p -m 755 alsaunmute %{buildroot}/%{_bindir}
+mkdir -p -m755 $RPM_BUILD_ROOT/%{_mandir}/man1
+install -p -m 644 %{SOURCE5} %{buildroot}/%{_mandir}/man1/alsaunmute.1
+
+# Move /usr/share/alsa/init to /usr/lib/alsa/init
+mkdir -p -m 755 %{buildroot}/%{_prefix}/lib/alsa
+mv %{buildroot}%{_datadir}/alsa/init %{buildroot}/%{_prefix}/lib/alsa
+
+# Link /usr/lib/alsa/init to /usr/share/alsa/init back
+ln -s ../../lib/alsa/init %{buildroot}%{_datadir}/alsa/init
+
+# Create a place for global configuration
+mkdir -p -m 755 %{buildroot}/etc/alsa
+install -p -m 644 %{SOURCE11} %{buildroot}/etc/alsa
+
+# Create /var/lib/alsa tree
+mkdir -p -m 755 %{buildroot}/var/lib/alsa
+
+# Install alsa-info.sh script
+install -p -m 755 %{SOURCE6} %{buildroot}/usr/bin/alsa-info
+ln -s alsa-info %{buildroot}/usr/bin/alsa-info.sh
+
+# Install alsa-delay script
+install -p -m 755 %{SOURCE7} %{buildroot}/usr/bin/alsa-delay
+
+%files -f %{name}.lang
+%defattr(-,root,root,-)
+%doc COPYING ChangeLog README TODO
+%config /etc/alsa/*
+%{_prefix}/lib/udev/rules.d/*
+%{_unitdir}/*
+%{_unitdir}/basic.target.wants/*
+%{_unitdir}/shutdown.target.wants/*
+%{_prefix}/lib/alsa/init/*
+%{_bindir}/*
+%{_sbindir}/*
+%{_datadir}/alsa/
+%{_datadir}/sounds/*
+%{_mandir}/man?/*
+%dir /etc/alsa/
+%dir %{_prefix}/lib/alsa/
+%dir %{_prefix}/lib/alsa/init/
+%dir /var/lib/alsa/
+
+%pre
+if [ ! -r /lib/systemd/system/alsa-state.service ]; then
+  [ -d /etc/alsa ] || mkdir -m 0755 /etc/alsa
+  echo "# Remove this file to disable the alsactl daemon mode" > \
+						/etc/alsa/state-daemon.conf
+fi
+
+%post
+if [ -s /etc/alsa/asound.state -a ! -s /etc/asound.state ] ; then
+  mv /etc/alsa/asound.state /etc/asound.state
+fi
+if [ -s /etc/asound.state -a ! -s /var/lib/alsa/asound.state ] ; then
+  mv /etc/asound.state /var/lib/alsa/asound.state
+fi
+
+%changelog
+* Tue Jul 30 2013 Jaroslav Kysela <jkysela@redhat.com> - 1.0.27.2-3
+- Added an updated alsa-delay script from RHEL 6
+
+* Fri Jul 19 2013 Jaroslav Kysela <jkysela@redhat.com> - 1.0.27.2-2
+- Fix alsa-state.service (rkill -> kill) - rhbz#986141
+
+* Wed Jul 10 2013 Jaroslav Kysela <jkysela@redhat.com> - 1.0.27.2-1
+- Updated to 1.0.27.2
+
+* Tue May 21 2013 Jaroslav Kysela <jkysela@redhat.com> - 1.0.27.1-1
+- Updated to 1.0.27.1
+- Updated alsa-info.sh to 0.4.61
+- Remove dependency on the dialog package (it is optional for alsa-info.sh)
+
+* Mon Apr 15 2013 Jaroslav Kysela <jkysela@redhat.com> - 1.0.27-2
+- Fix the new udev rules (missing GOTO) - bug#951750
+- Fix the string size in alsactl (underflow)
+
+* Fri Apr 12 2013 Jaroslav Kysela <jkysela@redhat.com> - 1.0.27-1
+- Updated to 1.0.27, activated the alsactl daemon mode
+- Updated alsa-info.sh to 0.4.61
+
+* Wed Feb 13 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.26-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
+
+* Thu Sep  6 2012 Jaroslav Kysela <jkysela@redhat.com> - 1.0.26-1
+- Updated to 1.0.26
+
+* Wed Jul 18 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.25-9
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
+
+* Tue Apr  3 2012 Peter Robinson <pbrobinson@fedoraproject.org> - 1.0.25-8
+- bump Release to be larger than F-16
+
+* Tue Jan 31 2012 Jaroslav Kysela <perex@perex.cz> 1.0.25-1
+- update to 1.0.25 final
+
+* Wed Jan 25 2012 Harald Hoyer <harald@redhat.com> 1.0.24.1-8
+- install everything in /usr
+  https://fedoraproject.org/wiki/Features/UsrMove
+
+* Thu Jan 12 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.24.1-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
+
+* Fri Jan  6 2012 Lennart Poettering <lpoetter@redhat.com> - 1.0.24.1-6
+- Always build with systemd support
+
+* Fri Jan  6 2012 Lennart Poettering <lpoetter@redhat.com> - 1.0.24.1-5
+- When installing the Fedora service files make sure to override the
+  actual service files with them instead of the symlinks to them
+- Drop StandardOutput=syslog since that is the default now and we
+  don't want to needlessly override the default
+
+* Mon Oct 31 2011 Bastien Nocera <bnocera@redhat.com> 1.0.24.1-4
+- Add patch to unmute MacBookAir4,1 speakers
+
+* Mon Feb 07 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.24.1-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
+
+* Fri Jan 28 2011 Jaroslav Kysela <jkysela@redhat.com> 1.0.24.1-2
+- add missing systemd files, add dependency on systemd-units
+- use own udev rule file for /lib/udev/rules.d
+- create /var/lib/alsa directory for asound.state
+
+* Fri Jan 28 2011 Jaroslav Kysela <jkysela@redhat.com> 1.0.24.1-1
+- updated to 1.0.24.1 final (new automake/autoconf)
+
+* Fri Jan 28 2011 Jaroslav Kysela <jkysela@redhat.com> 1.0.24-1
+- updated to 1.0.24 final
+- updated alsa-info.sh script to 0.4.60
+
+* Thu Jan 13 2011 Ville Skyttä <ville.skytta@iki.fi> - 1.0.23-4
+- Fix alsaunmute man page permissions, let rpmbuild compress it.
+
+* Mon Jun 28 2010 Jaroslav Kysela <jkysela@redhat.com> 1.0.23-3
+- add requires line (bug#526492) for specific alsa-lib package
+- add requires line for dialog package (bug#561988)
+- added man page for alsaunmute (bug#526174)
+- updated alsa-info.sh script to 0.4.59
+
+* Mon Jun 28 2010 Jaroslav Kysela <jkysela@redhat.com> 1.0.23-1
+- updated to 1.0.23 final
+
+* Sun Apr 18 2010 Thomas Spura <tomspur@fedoraproject.org> 1.0.22-2
+- don't own %%{_datadir}/sounds (#569425)
+
+* Fri Jan  1 2010 Jaroslav Kysela <jkysela@redhat.com> 1.0.22-1
+- updated to 1.0.22 final
+
+* Thu Sep  3 2009 Jaroslav Kysela <jkysela@redhat.com> 1.0.21-2
+- added missing patch file
+
+* Thu Sep  3 2009 Jaroslav Kysela <jkysela@redhat.com> 1.0.21-1
+- updated to 1.0.21 final
+- updated alsa-info.sh script to 0.4.58
+
+* Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.20-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
+
+* Fri May 15 2009 Jaroslav Kysela <jkysela@redhat.com> 1.0.20-3
+- added missing Headphone Volume patch
+
+* Fri May 15 2009 Jaroslav Kysela <jkysela@redhat.com> 1.0.20-2
+- fixed Headphone Volume issue (bz#500956)
+
+* Wed May 06 2009 Jaroslav Kysela <jkysela@redhat.com> 1.0.20-1
+- updated to 1.0.20 final
+- updated alsa-info.sh script to 0.4.56
+
+* Mon Feb 23 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.19-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
+
+* Mon Feb 09 2009 Jaroslav Kysela <jkysela@redhat.com> 1.0.19-3
+- fixed volume initialization for some HDA codecs
+- updated alsa-info.sh to 0.4.54
+
+* Wed Feb 04 2009 Jaroslav Kysela <jkysela@redhat.com> 1.0.19-2
+- add %dir directive for /lib/alsa and /lib/alsa/init directories (bz#483324)
+
+* Tue Jan 20 2009 Jaroslav Kysela <jkysela@redhat.com> 1.0.19-1
+- updated to 1.0.19 final
+
+* Tue Nov 04 2008 Jaroslav Kysela <jkysela@redhat.com> 1.0.18-5
+- fixed building
+
+* Tue Nov 04 2008 Jaroslav Kysela <jkysela@redhat.com> 1.0.18-4
+- updated to 1.0.18 final
+- updated alsa-info.sh script
+
+* Thu Sep 18 2008 Jaroslav Kysela <jkysela@redhat.com> 1.0.18-3.rc3
+- fixed alsa-info.sh link
+
+* Thu Sep 18 2008 Jaroslav Kysela <jkysela@redhat.com> 1.0.18-2.rc3
+- fixed /lib/alsa/init path for x86_64 (was /lib64/alsa/init)
+- added /etc/alsa/asound.state -> /etc/asound.state shift to %post section
+- fix udev rules (ommited /dev/ prefix for the alsactl utility)
+- added --ignore option for alsactl (added also to upstream)
+
+* Thu Sep 11 2008 Jaroslav Kysela <jkysela@redhat.com> 1.0.18-1.rc3
+- updated to 1.0.18rc3
+- updated alsa-info.sh script to 0.4.51
+- removed alsacard utility
+- removed salsa utility
+- changed alsaunmute to use 'alsactl init' now
+- updated ALSA udevd rules to use alsactl
+- moved /etc/alsa/asound.state back to /etc/asound.state
+
+* Mon Jul 21 2008 Jaroslav Kysela <jkysela@redhat.com> 1.0.17-1
+- updated to 1.0.17 final
+- updated alsa-info.sh script to 0.4.48
+
+* Mon Apr 28 2008 Martin Stransky <stransky@redhat.com> 1.0.16-3
+- Added alsa-info.sh script to /usr/bin/alsa-info
+
+* Tue Feb 19 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 1.0.16-2
+- Autorebuild for GCC 4.3
+
+* Mon Feb 18 2008 Martin Stransky <stransky@redhat.com> 1.0.16-1
+- updated to 1.0.16 final
+
+* Tue Jan 15 2008 Mikel Ward <mikel@mikelward.com>
+- add salsa man page
+
+* Mon Oct 29 2007 Martin Stransky <stransky@redhat.com> 1.0.15-1
+- updated to 1.0.15 final
+
+* Mon Oct 1 2007 Martin Stransky <stransky@redhat.com> 1.0.15-0.4.rc1
+- moved saved volume settings back to /etc/alsa
+  (per discussion at #293301)
+
+* Mon Sep 24 2007 Martin Stransky <stransky@redhat.com> 1.0.15-0.3.rc1
+- fixed #303151 - wrong salsa dir in /etc/udev/rules.d/90-alsa.rules
+
+* Thu Sep 20 2007 Matthias Saou <http://freshrpms.net/> 1.0.15-0.2.rc1
+- Update License field.
+- Mark udev rule as config.
+- Use find_lang macro again to include translations (why was it removed?).
+
+* Wed Sep 19 2007 Martin Stransky <stransky@redhat.com> 1.0.15-0.1.rc1
+- new upstream
+- moved saved volume settings to /var/lib (#293301)
+- patched alsactl for that (#255421)
+
+* Thu Aug 16 2007 Martin Stransky <stransky@redhat.com> 1.0.14-2
+- added an entry to alsaunmute for HP xw4550 (#252171)
+
+* Wed Jul 25 2007 Martin Stransky <stransky@redhat.com> 1.0.14-1
+- release bump
+
+* Thu Jun 7 2007 Martin Stransky <stransky@redhat.com> 1.0.14-0.8
+- new upstream
+
+* Wed May 30 2007 Martin Stransky <stransky@redhat.com> 1.0.14-0.7.rc2
+- updated alsanumute for Siemens Lifebook S7020 (#241639)
+- unmute Master Mono for all drivers
+
+* Wed May 2 2007 Martin Stransky <stransky@redhat.com> 1.0.14-0.6.rc2
+- added fix for #238442 (unmute Mono channel for w4550,
+  xw4600, xw6600, and xw8600)
+
+* Wed Apr 18 2007 Martin Stransky <stransky@redhat.com> 1.0.14-0.5.rc2
+- added more funcionality to salsa (save/load sound settings),
+  moved volume settings to /etc/alsa/
+
+* Thu Apr 10 2007 Martin Stransky <stransky@redhat.com> 1.0.14-0.4.rc2
+- added support for large files
+- minor fix in alsaunmute
+- fixed #209239 - alsaconf: Stale language-dependent files
+- fixed #233765 - alsa-utils : unowned directories
+
+* Fri Jan 19 2007 Martin Stransky <stransky@redhat.com> 1.0.14-0.3.rc2
+- new upstream
+
+* Wed Jan 10 2007 Martin Stransky <stransky@redhat.com> 1.0.14-0.2.rc1
+- added a config line for hda-intel driver
+
+* Mon Dec 11 2006 Martin Stransky <stransky@redhat.com> 1.0.14-0.1.rc1
+- new upstream
+
+* Mon Oct 2 2006 Martin Stransky <stransky@redhat.com> 1.0.12-3
+- fix for #207384 - Audio test fails during firstboot
+
+* Fri Aug 25 2006 Martin Stransky <stransky@redhat.com> 1.0.12-2
+- new upstream
+
+* Mon Aug 07 2006 Martin Stransky <stransky@redhat.com> 1.0.12-1.rc2
+- new upstream
+
+* Thu Jul 20 2006 Martin Stransky <stransky@redhat.com> 1.0.12-1.rc1
+- new upstream
+
+* Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - sh: line 0: fg: no job control
+- rebuild
+
+* Tue May 30 2006 Martin Stransky <stransky@redhat.com> 1.0.11-7
+- new upstream
+
+* Wed May 3  2006 Martin Stransky <stransky@redhat.com> 1.0.11-6.rc2
+- removed HW specific switch - it should be set by driver
+
+* Thu Apr 6  2006 Martin Stransky <stransky@redhat.com> 1.0.11-5.rc2
+- fixed rules file (#186494)
+- fixed Audigi mixer switch (#187807)
+
+* Mon Feb 20 2006 Martin Stransky <stransky@redhat.com> 1.0.11-3.rc2
+- removed autoreconf
+
+* Fri Feb 10 2006 Jesse Keating <jkeating@redhat.com> - 1.0.11-2.rc2.2
+- bump again for double-long bug on ppc(64)
+
+* Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 1.0.11-2.rc2.1
+- rebuilt for new gcc4.1 snapshot and glibc changes
+
+* Wed Jan 25 2006 Martin Stransky <stransky@redhat.com> 1.0.11-2.rc2
+- added volume option to alsaunmute utility (for s-c-s)
+
+* Thu Jan 12 2006 Martin Stransky <stransky@redhat.com> 1.0.11-1.rc2
+- new upstream
+
+* Fri Dec 09 2005 Jesse Keating <jkeating@redhat.com>
+- rebuilt
+
+* Thu Nov 24 2005 Martin Stransky <stransky@redhat.com> 1.0.10rf-1
+- new upstream version
+- added alias for snd-azx
+
+* Wed Nov 9 2005 Martin Stransky <stransky@redhat.com> 1.0.10rc1-2
+- fix for #169292 - RHEL4U2 xw4300 IntelHD internal speakers muted by default
+
+* Tue Sep 27 2005 Martin Stransky <stransky@redhat.com> 1.0.10rc1-1
+- new upstream version
+
+* Tue Aug 23 2005 Martin Stransky <stransky@redhat.com> 1.0.9-5
+- unmute External Amplifier by default (#166153)
+
+* Wed Jul 13 2005 Bill Nottingham <notting@redhat.com> 1.0.9-4
+- migrate the alsa restore program to a udev rule, not a dev.d program
+- conflict with appropriate udev
+- move alsaunmute, alsacard to /bin
+
+* Mon Jul 11 2005 Martin Stransky <stransky@redhat.com> 1.0.9-3
+- New alsaunmute utility
+- Add autoconf to BuildRequires (#162483)
+
+* Thu Jun 16 2005 Martin Stransky <stransky@redhat.com> 1.0.9-2
+- New upstream version
+
+* Mon May 30 2005 Martin Stransky <stransky@redhat.com> 1.0.9-1
+- New upstream version.
+- moved alsacard utility from alsa-lib to alsa-tools
+
+* Mon May 16 2005 Bill Nottingham <notting@redhat.com> 1.0.9rc2-2
+- make sure 'Wave' playback channel isn't muted (#157850)
+
+* Mon Apr 25 2005 Martin Stransky <stransky@redhat.com> 1.0.9rc2-1
+- New upstream version
+- add %%find_lang macro (#155719)
+
+* Fri Apr 1 2005 Bill Nottingham <notting@redhat.com> 1.0.8-4
+- replace the dev.d script with a program that calls alsactl to
+  restore the volume if there is a saved config, and just unmutes
+  the playback channels if there isn't one (#132575)
+
+* Mon Mar 7 2005 Martin Stransky <stransky@redhat.com>
+- rebuilt
+
+* Wed Feb 16 2005 Martin Stransky <stransky@redhat.com> 1.0.8-2
+- fix #148011 (add gettext-devel to BuildRequires)
+- add $RPM_OPT_FLAGS to CFLAGS
+
+* Wed Jan 26 2005 Martin Stransky <stransky@redhat.com> 1.0.8-1
+- update to 1.0.8
+- temporarily removed alsa-lauch.patch
+
+* Sat Jan 08 2005 Colin Walters <walters@redhat.com> 1.0.7-2
+- New patch alsa-utils-1.0.7-alsa-launch.patch, adds the
+  alsa-launch command.
+- New source file xinit-alsa-launch.sh, integrates alsa-launch
+  into X startup
+- BR xorg-x11-devel
+
+* Thu Jan 06 2005 Colin Walters <walters@redhat.com> 1.0.7-1
+- New upstream version
+
+* Tue Oct 19 2004 Bill Nottingham <notting@redhat.com> 1.0.6-3
+- tweak dev.d sound restore script (#133535, revisited)
+
+* Thu Oct 14 2004 Bill Nottingham <notting@redhat.com> 1.0.6-2
+- move alsactl to /sbin
+- include a dev.d script for mixer restoring (#133535)
+
+* Mon Aug 30 2004 Bill Nottingham <notting@redhat.com> 1.0.6-1
+- update to 1.0.6
+
+* Fri Jul  2 2004 Bill Nottingham <notting@redhat.com> 1.0.5-1
+- update to 1.0.5
+
+* Tue Jun 15 2004 Elliot Lee <sopwith@redhat.com>
+- rebuilt
+
+* Thu Mar 11 2004 Bill Nottingham <notting@redhat.com> 1.0.3-1
+- update to 1.0.3
+
+* Fri Feb 13 2004 Elliot Lee <sopwith@redhat.com>
+- rebuilt
+
+* Wed Jan 28 2004 Bill Nottingham <notting@redhat.com> 1.0.2-1
+- update to 1.0.2
+
+* Wed Dec 17 2003 Bill Nottingham <notting@redhat.com> 1.0.0-0.rc2
+- import fedora.us RPM, take out save-alsamixer & alsaconf for now
+
+* Thu Dec 11 2003 Thorsten Leemhuis <fedora[AT]leemhuis.info> 1.0.0-0.fdr.0.4.rc2
+- rename alsamixer-saver save-alsamixer
+
+* Mon Dec  8 2003 Thorsten Leemhuis <fedora[AT]leemhuis.info> 1.0.0-0.fdr.0.3.rc2
+- Integrate Michael Schwendt's script alsamixer-saver; Still not quite sure if
+  this script is the right way -- but mine didn't work...
+
+* Sat Dec  6 2003 Thorsten Leemhuis <fedora[AT]leemhuis.info> 1.0.0-0.fdr.0.2.rc2
+- Update to 1.0.0rc2
+- added alsamixer Script -- stores settings on shutdown, does nothing on startup
+- some minor corrections in spec-file style
+
+* Wed Dec  3 2003 Thorsten Leemhuis <fedora[AT]leemhuis.info> 1.0.0-0.fdr.0.1.rc1
+- Update to 1.0.0rc1
+
+* Wed Aug  6 2003 Dams <anvil[AT]livna.org> 0:utils-0.fdr.1
+- Initial build.