## Path:        Hardware/IPMI

## Description: Enable standard hardware interfaces (KCS, BT, SMIC)

## Type:        yesno

## Default:     "yes"

## Config:      ipmi

# Enable standard hardware interfaces (KCS, BT, SMIC)

# You probably want this enabled.

IPMI_SI=yes

## Path:        Hardware/IPMI

## Description: Enable /dev/ipmi0 interface, used by ipmitool, ipmicmd,

## Type:        yesno

## Default:     "yes"

## Config:      ipmi

# Enable /dev/ipmi0 interface, used by ipmitool, ipmicmd,

# and other userspace IPMI-using applications.

# You probably want this enabled.

DEV_IPMI=yes

## Path:        Hardware/IPMI

## Description: Enable IPMI_WATCHDOG if you want the IPMI watchdog

## Type:        yesno

## Default:     "no"

## Config:      ipmi

# Enable IPMI_WATCHDOG if you want the IPMI watchdog

# to reboot the system if it hangs

IPMI_WATCHDOG=no

## Path:        Hardware/IPMI

## Description: Watchdog options - modinfo ipmi_watchdog for details

## Type:        string

## Default:     "timeout=60"

## Config:      ipmi

# Watchdog options - modinfo ipmi_watchdog for details

# watchdog timeout value in seconds

# as there is no userspace ping application that runs during shutdown,

# be sure to give it enough time for any device drivers to

# do their cleanup (e.g. megaraid cache flushes)

# without the watchdog triggering prematurely

IPMI_WATCHDOG_OPTIONS="timeout=60"

## Path:        Hardware/IPMI

## Description: Enable IPMI_POWEROFF if you want the IPMI poweroff module to be loaded.

## Type:        yesno

## Default:     "no"

## Config:      ipmi

# Enable IPMI_POWEROFF if you want the IPMI

# poweroff module to be loaded.

IPMI_POWEROFF=no

## Path:        Hardware/IPMI

## Description: Enable IPMI_POWERCYCLE if you want the system to be power-cycled on reboot

## Type:        yesno

## Default:     "no"

## Config:      ipmi

# Enable IPMI_POWERCYCLE if you want the system to be power-cycled (power

# down, delay briefly, power on) rather than power off, on systems

# that support such.  IPMI_POWEROFF=yes is also required.

IPMI_POWERCYCLE=no

## Path:        Hardware/IPMI

## Description: Enable "legacy" interfaces for applications

## Type:        yesno

## Default:     "no"

## Config:      ipmi

# Enable "legacy" interfaces for applications

# Intel IMB driver interface

IPMI_IMB=no