# build-time settings that support --with or --without:

#

# = x86only =

# Build only x86 Qemu targets.

#

# Disabled by default.

#

# = exclusive_x86_64 =

# ExclusiveArch: x86_64

#

# Disabled by default, except on RHEL.

#

# = rbd =

# Enable rbd support.

#

# Enable by default, except on RHEL.

#

# = fdt =

# Enable fdt support.

#

# Enabled by default, except on RHEL.

%if 0%{?rhel}

# RHEL-specific defaults:

%bcond_without x86only          # enabled

%bcond_without exclusive_x86_64 # enabled

%bcond_with    rbd              # disabled

%bcond_with    fdt              # disabled

%else

# General defaults:

%bcond_with    x86only          # disabled

%bcond_with    exclusive_x86_64 # disabled

%bcond_without rbd              # enabled

%bcond_without fdt              # enabled

%endif

%global SLOF_gittagdate 20120731

Summary: QEMU is a FAST! processor emulator

Name: qemu

Version: 1.2.0

Release: 10%{?dist}

# Epoch because we pushed a qemu-1.0 package. AIUI this can't ever be dropped

Epoch: 2

License: GPLv2+ and LGPLv2+ and BSD

Group: Development/Tools

URL: http://www.qemu.org/

# RHEL will build Qemu only on x86_64:

%if %{with exclusive_x86_64}

ExclusiveArch: x86_64

%endif

# OOM killer breaks builds with parallel make on s390(x)

%ifarch s390 s390x

%define _smp_mflags %{nil}

%endif

# This is generated from the git qemu-kvm-1.2.0 tag, replace with proper

# upstream tarbal once available

Source0: qemu-kvm-%{version}.tar.gz

#Source0: http://downloads.sourceforge.net/sourceforge/kvm/qemu-kvm-%{version}.tar.gz

Source1: qemu.binfmt

# Loads kvm kernel modules at boot

Source2: kvm.modules

# Creates /dev/kvm

Source3: 80-kvm.rules

# KSM control scripts

Source4: ksm.service

Source5: ksm.sysconfig

Source6: ksmctl.c

Source7: ksmtuned.service

Source8: ksmtuned

Source9: ksmtuned.conf

Source10: qemu-guest-agent.service

Source11: 99-qemu-guest-agent.rules

# Non upstream build fix

Patch1: 0001-mips-Fix-link-error-with-piix4_pm_init.patch

# Add ./configure --disable-kvm-options

# keep: Carrying locally until qemu-kvm is fully merged into qemu.git

Patch2: 0002-configure-Add-disable-kvm-options.patch

# The infamous chardev flow control patches

Patch101: 0101-char-Split-out-tcp-socket-close-code-in-a-separate-f.patch

Patch102: 0102-char-Add-a-QemuChrHandlers-struct-to-initialise-char.patch

Patch103: 0103-iohandlers-Add-enable-disable_write_fd_handler-funct.patch

Patch104: 0104-char-Add-framework-for-a-write-unblocked-callback.patch

Patch105: 0105-char-Update-send_all-to-handle-nonblocking-chardev-w.patch

Patch106: 0106-char-Equip-the-unix-tcp-backend-to-handle-nonblockin.patch

Patch107: 0107-char-Throttle-when-host-connection-is-down.patch

Patch108: 0108-virtio-console-Enable-port-throttling-when-chardev-i.patch

Patch109: 0109-spice-qemu-char.c-add-throttling.patch

Patch110: 0110-spice-qemu-char.c-remove-intermediate-buffer.patch

Patch111: 0111-usb-redir-Add-flow-control-support.patch

Patch112: 0112-virtio-serial-bus-replay-guest_open-on-migration.patch

Patch113: 0113-char-Disable-write-callback-if-throttled-chardev-is-.patch

# Spice features from upstream master: seamless migration & dynamic monitors

Patch201: 0201-spice-abort-on-invalid-streaming-cmdline-params.patch

Patch202: 0202-spice-notify-spice-server-on-vm-start-stop.patch

Patch203: 0203-spice-notify-on-vm-state-change-only-via-spice_serve.patch

Patch204: 0204-spice-migration-add-QEVENT_SPICE_MIGRATE_COMPLETED.patch

Patch205: 0205-spice-add-migrated-flag-to-spice-info.patch

Patch206: 0206-spice-adding-seamless-migration-option-to-the-comman.patch

Patch207: 0207-spice-increase-the-verbosity-of-spice-section-in-qem.patch

Patch208: 0208-qxl-update_area_io-guest_bug-on-invalid-parameters.patch

Patch209: 0209-qxl-disallow-unknown-revisions.patch

Patch210: 0210-qxl-add-QXL_IO_MONITORS_CONFIG_ASYNC.patch

Patch211: 0211-configure-print-spice-protocol-and-spice-server-vers.patch

Patch212: 0212-spice-make-number-of-surfaces-runtime-configurable.patch

Patch213: 0213-qxl-Add-set_client_capabilities-interface-to-QXLInte.patch

Patch214: 0214-Remove-ifdef-QXL_COMMAND_FLAG_COMPAT_16BPP.patch

Patch215: 0215-spice-switch-to-queue-for-vga-mode-updates.patch

Patch216: 0216-spice-split-qemu_spice_create_update.patch

Patch217: 0217-spice-add-screen-mirror.patch

Patch218: 0218-spice-send-updates-only-for-changed-screen-content.patch

Patch219: 0219-qxl-dont-update-invalid-area.patch

Patch220: 0220-qxl-Ignore-set_client_capabilities-pre-post-migrate.patch

Patch221: 0221-qxl-better-cleanup-for-surface-destroy.patch

Patch222: 0222-hw-qxl-tracing-fixes.patch

Patch223: 0223-qxl-add-trace-event-for-QXL_IO_LOG.patch

Patch224: 0224-hw-qxl-support-client-monitor-configuration-via-devi.patch

Patch225: 0225-qxl-always-update-displaysurface-on-resize.patch

Patch226: 0226-qxl-update_area_io-cleanup-invalid-parameters-handli.patch

Patch227: 0227-qxl-fix-range-check-for-rev3-io-commands.patch

# Ugh, ton of USB bugfixes / preparation patches for usb-redir

# live-migration which did not make 1.2.0 :|

# All are in upstream master so can be dropped next qemu release

Patch0301: 0301-usb-controllers-do-not-need-to-check-for-babble-them.patch

Patch0302: 0302-usb-core-Don-t-set-packet-state-to-complete-on-a-nak.patch

Patch0303: 0303-usb-core-Add-a-usb_ep_find_packet_by_id-helper-funct.patch

Patch0304: 0304-usb-core-Allow-the-first-packet-of-a-pipelined-ep-to.patch

Patch0305: 0305-Revert-ehci-don-t-flush-cache-on-doorbell-rings.patch

Patch0306: 0306-ehci-Validate-qh-is-not-changed-unexpectedly-by-the-.patch

Patch0307: 0307-ehci-Update-copyright-headers-to-reflect-recent-work.patch

Patch0308: 0308-ehci-Properly-cleanup-packets-on-cancel.patch

Patch0309: 0309-ehci-Properly-report-completed-but-not-yet-processed.patch

Patch0310: 0310-ehci-check-for-EHCI_ASYNC_FINISHED-first-in-ehci_fre.patch

Patch0311: 0311-ehci-trace-guest-bugs.patch

Patch0312: 0312-ehci-add-doorbell-trace-events.patch

Patch0313: 0313-ehci-Add-some-additional-ehci_trace_guest_bug-calls.patch

Patch0314: 0314-ehci-Fix-memory-leak-in-handling-of-NAK-ed-packets.patch

Patch0315: 0315-ehci-Handle-USB_RET_PROCERR-in-ehci_fill_queue.patch

Patch0316: 0316-ehci-Correct-a-comment-in-fetchqtd-packet-processing.patch

Patch0317: 0317-usb-redir-Never-return-USB_RET_NAK-for-async-handled.patch

Patch0318: 0318-usb-redir-Don-t-delay-handling-of-open-events-to-a-b.patch

Patch0319: 0319-usb-redir-Get-rid-of-async-struct-get-member.patch

Patch0320: 0320-usb-redir-Get-rid-of-local-shadow-copy-of-packet-hea.patch

Patch0321: 0321-usb-redir-Get-rid-of-unused-async-struct-dev-member.patch

Patch0322: 0322-usb-redir-Move-to-core-packet-id-and-queue-handling.patch

Patch0323: 0323-usb-redir-Return-babble-when-getting-more-bulk-data-.patch

Patch0324: 0324-usb-redir-Convert-to-new-libusbredirparser-0.5-API.patch

Patch0325: 0325-usb-redir-Set-ep-max_packet_size-if-available.patch

Patch0326: 0326-usb-redir-Add-a-usbredir_reject_device-helper-functi.patch

Patch0327: 0327-usb-redir-Ensure-our-peer-has-the-necessary-caps-whe.patch

Patch0328: 0328-usb-redir-Enable-pipelining-for-bulk-endpoints.patch

Patch0329: 0329-Better-name-usb-braille-device.patch

Patch0330: 0330-usb-audio-fix-usb-version.patch

Patch0331: 0331-xhci-rip-out-background-transfer-code.patch

Patch0332: 0332-xhci-drop-buffering.patch

Patch0333: 0333-xhci-move-device-lookup-into-xhci_setup_packet.patch

Patch0334: 0334-xhci-implement-mfindex.patch

Patch0335: 0335-xhci-iso-xfer-support.patch

Patch0336: 0336-xhci-trace-cc-codes-in-cleartext.patch

Patch0337: 0337-xhci-add-trace_usb_xhci_ep_set_dequeue.patch

Patch0338: 0338-xhci-fix-runtime-write-tracepoint.patch

Patch0339: 0339-xhci-update-register-layout.patch

Patch0340: 0340-xhci-update-port-handling.patch

Patch0341: 0341-usb3-superspeed-descriptors.patch

Patch0342: 0342-usb3-superspeed-endpoint-companion.patch

Patch0343: 0343-usb3-bos-decriptor.patch

Patch0344: 0344-usb-storage-usb3-support.patch

Patch0345: 0345-xhci-fix-cleanup-msi.patch

Patch0346: 0346-xhci-rework-interrupt-handling.patch

Patch0347: 0347-xhci-add-msix-support.patch

Patch0348: 0348-xhci-move-register-update-into-xhci_intr_raise.patch

Patch0349: 0349-xhci-add-XHCIInterrupter.patch

Patch0350: 0350-xhci-prepare-xhci_runtime_-read-write-for-multiple-i.patch

Patch0351: 0351-xhci-pick-target-interrupter.patch

Patch0352: 0352-xhci-support-multiple-interrupters.patch

Patch0353: 0353-xhci-kill-xhci_mem_-read-write-dispatcher-functions.patch

Patch0354: 0354-xhci-allow-bytewise-capability-register-reads.patch

Patch0355: 0355-usb-host-allow-emulated-non-async-control-requests-w.patch

Patch0356: 0356-ehci-switch-to-new-style-memory-ops.patch

Patch0357: 0357-ehci-Fix-interrupts-stopping-when-Interrupt-Threshol.patch

Patch0358: 0358-ehci-Don-t-process-too-much-frames-in-1-timer-tick-v.patch

Patch0359: 0359-configure-usbredir-fixes.patch

Patch0360: 0360-ehci-Don-t-set-seen-to-0-when-removing-unseen-queue-.patch

Patch0361: 0361-ehci-Walk-async-schedule-before-and-after-migration.patch

Patch0362: 0362-usb-redir-Change-cancelled-packet-code-into-a-generi.patch

Patch0363: 0363-usb-redir-Add-an-already_in_flight-packet-id-queue.patch

Patch0364: 0364-usb-redir-Store-max_packet_size-in-endp_data.patch

Patch0365: 0365-usb-redir-Add-support-for-migration.patch

Patch0366: 0366-usb-redir-Add-chardev-open-close-debug-logging.patch

Patch0367: 0367-usb-redir-Revert-usb-redir-part-of-commit-93bfef4c.patch

Patch0368: 0368-uhci-Don-t-queue-up-packets-after-one-with-the-SPD-f.patch

# And the last few ehci fixes + the actual usb-redir live migration code

# Not yet upstream but should get there real soon

Patch0369: 0369-ehci-Fix-interrupt-packet-MULT-handling.patch

Patch0370: 0370-usb-redir-Adjust-pkg-config-check-for-usbredirparser.patch

# Revert c3767ed0eb5d0.

# NOT upstream (hopefully will be soon).

# See: https://bugzilla.redhat.com/show_bug.cgi?id=853408

# and: https://lists.gnu.org/archive/html/qemu-devel/2012-09/msg00526.html

# plus followups.

Patch0900: 0001-Revert-qemu-char-Re-connect-for-tcp_chr_write-unconn.patch

BuildRequires: SDL-devel

BuildRequires: zlib-devel

BuildRequires: which

BuildRequires: texi2html

BuildRequires: gnutls-devel

BuildRequires: cyrus-sasl-devel

BuildRequires: libtool

BuildRequires: libaio-devel

BuildRequires: rsync

BuildRequires: pciutils-devel

BuildRequires: pulseaudio-libs-devel

BuildRequires: ncurses-devel

BuildRequires: libattr-devel

BuildRequires: usbredir-devel >= 0.5.2

BuildRequires: texinfo

%ifarch %{ix86} x86_64

BuildRequires: spice-protocol >= 0.12.1

BuildRequires: spice-server-devel >= 0.11.3

BuildRequires: libseccomp-devel >= 1.0.0

%endif

# For network block driver

BuildRequires: libcurl-devel

%if %{with rbd}

# For rbd block driver

BuildRequires: ceph-devel

%endif

# We need both because the 'stap' binary is probed for by configure

BuildRequires: systemtap

BuildRequires: systemtap-sdt-devel

# For smartcard NSS support

BuildRequires: nss-devel

# For XFS discard support in raw-posix.c

BuildRequires: xfsprogs-devel

# For VNC JPEG support

BuildRequires: libjpeg-devel

# For VNC PNG support

BuildRequires: libpng-devel

# For uuid generation

BuildRequires: libuuid-devel

# For BlueZ device support

BuildRequires: bluez-libs-devel

# For Braille device support

BuildRequires: brlapi-devel

%if %{with fdt}

# For FDT device tree support

BuildRequires: libfdt-devel

%endif

# For test suite

BuildRequires: check-devel

# For virtfs

BuildRequires: libcap-devel

Requires: %{name}-user = %{epoch}:%{version}-%{release}

%if %{without x86only}

Requires: %{name}-system-arm = %{epoch}:%{version}-%{release}

Requires: %{name}-system-cris = %{epoch}:%{version}-%{release}

Requires: %{name}-system-m68k = %{epoch}:%{version}-%{release}

Requires: %{name}-system-mips = %{epoch}:%{version}-%{release}

Requires: %{name}-system-ppc = %{epoch}:%{version}-%{release}

Requires: %{name}-system-sh4 = %{epoch}:%{version}-%{release}

Requires: %{name}-system-sparc = %{epoch}:%{version}-%{release}

Requires: %{name}-system-x86 = %{epoch}:%{version}-%{release}

%endif

Requires: %{name}-img = %{epoch}:%{version}-%{release}

%define qemudocdir %{_docdir}/%{name}

%description

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation. QEMU has two operating modes:

 * Full system emulation. In this mode, QEMU emulates a full system (for

   example a PC), including a processor and various peripherials. It can be

   used to launch different Operating Systems without rebooting the PC or

   to debug system code.

 * User mode emulation. In this mode, QEMU can launch Linux processes compiled

   for one CPU on another CPU.

As QEMU requires no host kernel patches to run, it is safe and easy to use.

%package kvm

Summary: QEMU metapackage for KVM support

Group: Development/Tools

%ifarch %{ix86} x86_64

Requires: qemu-system-x86 = %{epoch}:%{version}-%{release}

%endif

%description kvm

This is a meta-package that provides a qemu-system-<arch> package for native

architectures where kvm can be enabled. For example, in an x86 system, this

will install qemu-system-x86

%package  img

Summary: QEMU command line tool for manipulating disk images

Group: Development/Tools

%if %{with rbd}

# librbd (from ceph) added new symbol rbd_flush recently.  If you

# update qemu-img without updating librdb you get:

# qemu-img: undefined symbol: rbd_flush

# ** NB ** This can be removed after Fedora 17 is released.

Conflicts: ceph < 0.37-2

%endif

%description img

This package provides a command line tool for manipulating disk images

%package  common

Summary: QEMU common files needed by all QEMU targets

Group: Development/Tools

Requires(post): /usr/bin/getent

Requires(post): /usr/sbin/groupadd

Requires(post): /usr/sbin/useradd

Requires(post): systemd-units

Requires(preun): systemd-units

Requires(postun): systemd-units

%description common

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the common files needed by all QEMU targets

%package guest-agent

Summary: QEMU guest agent

Group: System Environment/Daemons

Requires(post): systemd-units

Requires(preun): systemd-units

Requires(postun): systemd-units

%description guest-agent

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides an agent to run inside guests, which communicates

with the host over a virtio-serial channel named "org.qemu.guest_agent.0"

This package does not need to be installed on the host OS.

%post guest-agent

if [ $1 -eq 1 ] ; then

    # Initial installation.

    /bin/systemctl daemon-reload >/dev/null 2>&1 || :

fi

%preun guest-agent

if [ $1 -eq 0 ] ; then

    # Package removal, not upgrade.

    /bin/systemctl stop qemu-guest-agent.service > /dev/null 2>&1 || :

fi

%postun guest-agent

/bin/systemctl daemon-reload >/dev/null 2>&1 || :

if [ $1 -ge 1 ] ; then

    # Package upgrade, not uninstall.

    /bin/systemctl try-restart qemu-guest-agent.service >/dev/null 2>&1 || :

fi

%package user

Summary: QEMU user mode emulation of qemu targets

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

Requires(post): systemd-units

Requires(postun): systemd-units

%description user

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the user mode emulation of qemu targets

%package system-x86

Summary: QEMU system emulator for x86

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

Provides: kvm = 85

Obsoletes: kvm < 85

Requires: vgabios >= 0.6c-2

Requires: seabios-bin >= 0.6.0-2

Requires: sgabios-bin

Requires: ipxe-roms-qemu

%ifarch %{ix86} x86_64

Requires: libseccomp >= 1.0.0

%endif

%description system-x86

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for x86. When being run in a x86

machine that supports it, this package also provides the KVM virtualization

platform.

%if %{without x86only}

%package system-arm

Summary: QEMU system emulator for arm

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

%description system-arm

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for arm

%package system-mips

Summary: QEMU system emulator for mips

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

%description system-mips

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for mips

%package system-cris

Summary: QEMU system emulator for cris

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

%description system-cris

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for cris

%package system-m68k

Summary: QEMU system emulator for m68k

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

%description system-m68k

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for m68k

%package system-sh4

Summary: QEMU system emulator for sh4

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

%description system-sh4

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for sh4

%package system-sparc

Summary: QEMU system emulator for sparc

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

Requires: openbios

%description system-sparc

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for sparc and sparc64

%package system-ppc

Summary: QEMU system emulator for PPC

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

Requires: openbios

Requires: SLOF = 0-0.1.git%{SLOF_gittagdate}%{?dist}

%description system-ppc

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for ppc

%endif

%ifarch %{ix86} x86_64

%package kvm-tools

Summary: KVM debugging and diagnostics tools

Group: Development/Tools

%description kvm-tools

This package contains some diagnostics and debugging tools for KVM,

such as kvm_stat.

%endif

%prep

%setup -q -n qemu-kvm-%{version}

%patch1 -p1

%patch2 -p1

%patch101 -p1

%patch102 -p1

%patch103 -p1

%patch104 -p1

%patch105 -p1

%patch106 -p1

%patch107 -p1

%patch108 -p1

%patch109 -p1

%patch110 -p1

%patch111 -p1

%patch112 -p1

%patch113 -p1

%patch201 -p1

%patch202 -p1

%patch203 -p1

%patch204 -p1

%patch205 -p1

%patch206 -p1

%patch207 -p1

%patch208 -p1

%patch209 -p1

%patch210 -p1

%patch211 -p1

%patch212 -p1

%patch213 -p1

%patch214 -p1

%patch215 -p1

%patch216 -p1

%patch217 -p1

%patch218 -p1

%patch219 -p1

%patch220 -p1

%patch221 -p1

%patch222 -p1

%patch223 -p1

%patch224 -p1

%patch225 -p1

%patch226 -p1

%patch227 -p1

%patch301 -p1

%patch302 -p1

%patch303 -p1

%patch304 -p1

%patch305 -p1

%patch306 -p1

%patch307 -p1

%patch308 -p1

%patch309 -p1

%patch310 -p1

%patch311 -p1

%patch312 -p1

%patch313 -p1

%patch314 -p1

%patch315 -p1

%patch316 -p1

%patch317 -p1

%patch318 -p1

%patch319 -p1

%patch320 -p1

%patch321 -p1

%patch322 -p1

%patch323 -p1

%patch324 -p1

%patch325 -p1

%patch326 -p1

%patch327 -p1

%patch328 -p1

%patch329 -p1

%patch330 -p1

%patch331 -p1

%patch332 -p1

%patch333 -p1

%patch334 -p1

%patch335 -p1

%patch336 -p1

%patch337 -p1

%patch338 -p1

%patch339 -p1

%patch340 -p1

%patch341 -p1

%patch342 -p1

%patch343 -p1

%patch344 -p1

%patch345 -p1

%patch346 -p1

%patch347 -p1

%patch348 -p1

%patch349 -p1

%patch350 -p1

%patch351 -p1

%patch352 -p1

%patch353 -p1

%patch354 -p1

%patch355 -p1

%patch356 -p1

%patch357 -p1

%patch358 -p1

%patch359 -p1

%patch360 -p1

%patch361 -p1

%patch362 -p1

%patch363 -p1

%patch364 -p1

%patch365 -p1

%patch366 -p1

%patch367 -p1

%patch368 -p1

%patch369 -p1

%patch370 -p1

%patch900 -p1

%build

buildarch="i386-softmmu x86_64-softmmu arm-softmmu cris-softmmu \

    m68k-softmmu mips-softmmu mipsel-softmmu mips64-softmmu \

    mips64el-softmmu sh4-softmmu sh4eb-softmmu sparc-softmmu sparc64-softmmu \

    ppc-softmmu ppcemb-softmmu ppc64-softmmu \

    i386-linux-user x86_64-linux-user alpha-linux-user arm-linux-user \

    armeb-linux-user cris-linux-user m68k-linux-user mips-linux-user \

    mipsel-linux-user ppc-linux-user ppc64-linux-user \

    ppc64abi32-linux-user sh4-linux-user sh4eb-linux-user \

    sparc-linux-user sparc64-linux-user sparc32plus-linux-user"

%if %{with x86only}

    buildarch="i386-softmmu x86_64-softmmu i386-linux-user x86_64-linux-user"

%endif

# Targets we don't build as of qemu 1.1.50

# alpha-softmmu lm32-softmmu microblaze-softmmu microblazeel-softmmu

# or32-softmmu s390x-softmmu xtensa-softmmu xtensaeb-softmmu unicore32-softmmu

# alpha-linux-user microblaze-linux-user microblazeel-linux-user

# or32-linux-user unicore32-linux-user s390x-linux-user

# --build-id option is used for giving info to the debug packages.

extraldflags="-Wl,--build-id";

buildldflags="VL_LDFLAGS=-Wl,--build-id"

%ifarch s390

# drop -g flag to prevent memory exhaustion by linker

%global optflags %(echo %{optflags} | sed 's/-g//')

sed -i.debug 's/"-g $CFLAGS"/"$CFLAGS"/g' configure

%endif

dobuild() {

    ./configure \

        --prefix=%{_prefix} \

        --sysconfdir=%{_sysconfdir} \

        --interp-prefix=%{_prefix}/qemu-%%M \

        --audio-drv-list=pa,sdl,alsa,oss \

        --disable-strip \

        --extra-ldflags="$extraldflags -pie -Wl,-z,relro -Wl,-z,now" \

        --extra-cflags="%{optflags} -fPIE -DPIE" \

%ifarch %{ix86} x86_64

        --enable-spice \

        --enable-mixemu \

        --enable-seccomp \

%endif

%if %{without rbd}

        --disable-rbd \

%endif

%if %{without fdt}

        --disable-fdt \

%endif

        --enable-trace-backend=dtrace \

        --disable-werror \

        --disable-xen \

        --enable-kvm \

        "$@"

    echo "config-host.mak contents:"

    echo "==="

    cat config-host.mak

    echo "==="

    make V=1 %{?_smp_mflags} $buildldflags

}

# This is kind of confusing. We run ./configure + make twice here to

# preserve some back compat: if on x86, we want to provide a qemu-kvm

# binary that defaults to KVM=on. All other qemu-system* should be

# able to use KVM, but default to KVM=off (upstream qemu semantics).

#

# Once qemu-kvm and qemu fully merge, and we base off qemu releases,

# all qemu-system-* will default to KVM=off, so we hopefully won't need

# to do these double builds. But then I'm not sure how we are going to

# generate a back compat qemu-kvm binary...

%ifarch %{ix86} x86_64

# Build qemu-kvm back compat binary

dobuild --target-list=x86_64-softmmu

# Setup back compat qemu-kvm binary which defaults to KVM=on

./scripts/tracetool.py --backend dtrace --format stap \

  --binary %{_bindir}/qemu-kvm --target-arch x86_64 --target-type system \

  --probe-prefix qemu.kvm < ./trace-events > qemu-kvm.stp

cp -a x86_64-softmmu/qemu-system-x86_64 qemu-kvm

make clean

%endif

# Build qemu-system-* with consistent default of kvm=off

dobuild --target-list="$buildarch" --disable-kvm-options

gcc %{SOURCE6} -O2 -g -o ksmctl

%install

%define _udevdir /lib/udev/rules.d

install -D -p -m 0755 %{SOURCE4} $RPM_BUILD_ROOT/lib/systemd/system/ksm.service

install -D -p -m 0644 %{SOURCE5} $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/ksm

install -D -p -m 0755 ksmctl $RPM_BUILD_ROOT/lib/systemd/ksmctl

install -D -p -m 0755 %{SOURCE7} $RPM_BUILD_ROOT/lib/systemd/system/ksmtuned.service

install -D -p -m 0755 %{SOURCE8} $RPM_BUILD_ROOT%{_sbindir}/ksmtuned

install -D -p -m 0644 %{SOURCE9} $RPM_BUILD_ROOT%{_sysconfdir}/ksmtuned.conf

%ifarch %{ix86} x86_64

mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/modules

mkdir -p $RPM_BUILD_ROOT%{_bindir}/

mkdir -p $RPM_BUILD_ROOT%{_datadir}/%{name}

mkdir -p $RPM_BUILD_ROOT%{_udevdir}

mkdir -p $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset

install -m 0755 %{SOURCE2} $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/modules/kvm.modules

install -m 0755 scripts/kvm/kvm_stat $RPM_BUILD_ROOT%{_bindir}/

install -m 0755 qemu-kvm $RPM_BUILD_ROOT%{_bindir}/

install -m 0644 qemu-kvm.stp $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/

install -m 0644 %{SOURCE3} $RPM_BUILD_ROOT%{_udevdir}

%endif

make DESTDIR=$RPM_BUILD_ROOT install

chmod -x ${RPM_BUILD_ROOT}%{_mandir}/man1/*

install -D -p -m 0644 -t ${RPM_BUILD_ROOT}%{qemudocdir} Changelog README TODO COPYING COPYING.LIB LICENSE

install -D -p -m 0644 qemu.sasl $RPM_BUILD_ROOT%{_sysconfdir}/sasl2/qemu.conf

# Provided by package ipxe

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/pxe*rom

# Provided by package vgabios

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/vgabios*bin

# Provided by package seabios

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/bios.bin

# Provided by package sgabios

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/sgabios.bin

# Provided by package openbios

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/openbios-ppc

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/openbios-sparc32

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/openbios-sparc64

# Provided by package SLOF

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/slof.bin

# remove unpackaged files on x86only:

%if %{with x86only}

rm -f ${RPM_BUILD_ROOT}%{_datadir}/%{name}/bamboo.dtb

rm -f ${RPM_BUILD_ROOT}%{_datadir}/%{name}/ppc_rom.bin

rm -f ${RPM_BUILD_ROOT}%{_datadir}/%{name}/spapr-rtas.bin

%endif

# The following aren't provided by any Fedora package

# Used by target s390/s390x

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/s390-zipl.rom

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/palcode-clipper

# Binary device trees for microblaze target

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/petalogix*.dtb

# the pxe gpxe images will be symlinks to the images on

# /usr/share/ipxe, as QEMU doesn't know how to look

# for other paths, yet.

pxe_link() {

  ln -s ../ipxe/$2.rom %{buildroot}%{_datadir}/%{name}/pxe-$1.rom

}

pxe_link e1000 8086100e

pxe_link ne2k_pci 10ec8029

pxe_link pcnet 10222000

pxe_link rtl8139 10ec8139

pxe_link virtio 1af41000

rom_link() {

    ln -s $1 %{buildroot}%{_datadir}/%{name}/$2

}

rom_link ../vgabios/VGABIOS-lgpl-latest.bin vgabios.bin

rom_link ../vgabios/VGABIOS-lgpl-latest.cirrus.bin vgabios-cirrus.bin

rom_link ../vgabios/VGABIOS-lgpl-latest.qxl.bin vgabios-qxl.bin

rom_link ../vgabios/VGABIOS-lgpl-latest.stdvga.bin vgabios-stdvga.bin

rom_link ../vgabios/VGABIOS-lgpl-latest.vmware.bin vgabios-vmware.bin

rom_link ../seabios/bios.bin bios.bin

rom_link ../sgabios/sgabios.bin sgabios.bin

mkdir -p $RPM_BUILD_ROOT%{_exec_prefix}/lib/binfmt.d

for i in dummy \

%ifnarch %{ix86} x86_64

    qemu-i386 \

%endif

%if %{without x86only}

%ifnarch alpha

    qemu-alpha \

%endif

%ifnarch arm

    qemu-arm \

%endif

    qemu-armeb \

%ifnarch mips

    qemu-mips qemu-mipsn32 qemu-mips64 \

%endif

%ifnarch mipsel

    qemu-mipsel qemu-mipsn32el qemu-mips64el \

%endif

%ifnarch m68k

    qemu-m68k \

%endif

%ifnarch ppc ppc64

    qemu-ppc \

%endif

%ifnarch sparc sparc64

    qemu-sparc \

%endif

%ifnarch s390 s390x

    qemu-s390x \

%endif

%ifnarch sh4

    qemu-sh4 \

%endif

    qemu-sh4eb \

%endif

; do

  test $i = dummy && continue

  grep /$i:\$ %{SOURCE1} > $RPM_BUILD_ROOT%{_exec_prefix}/lib/binfmt.d/$i.conf

  chmod 644 $RPM_BUILD_ROOT%{_exec_prefix}/lib/binfmt.d/$i.conf

done < %{SOURCE1}

# For the qemu-guest-agent subpackage install the systemd

# service and udev rules.

mkdir -p $RPM_BUILD_ROOT%{_unitdir}

mkdir -p $RPM_BUILD_ROOT%{_udevdir}

install -m 0644 %{SOURCE10} $RPM_BUILD_ROOT%{_unitdir}

install -m 0644 %{SOURCE11} $RPM_BUILD_ROOT%{_udevdir}

%check