# -*- rpm-spec -*-

# If neither fedora nor rhel was defined, try to guess them from %{dist}

%if !0%{?rhel} && !0%{?fedora}

%{expand:%(echo "%{?dist}" | \

  sed -ne 's/^\.el\([0-9]\+\).*/%%define rhel \1/p')}

%{expand:%(echo "%{?dist}" | \

  sed -ne 's/^\.fc\?\([0-9]\+\).*/%%define fedora \1/p')}

%endif

# Default to skipping autoreconf.  Distros can change just this one line

# (or provide a command-line override) if they backport any patches that

# touch configure.ac or Makefile.am.

%{!?enable_autotools:%define enable_autotools 0}

# A client only build will create a libvirt.so only containing

# the generic RPC driver, and test driver and no libvirtd

# Default to a full server + client build

%define client_only        0

# Now turn off server build in certain cases

# RHEL-5 builds are client-only for s390, ppc

%if 0%{?rhel} == 5

    %ifnarch %{ix86} x86_64 ia64

        %define client_only        1

    %endif

%endif

# Disable all server side drivers if client only build requested

%if %{client_only}

    %define server_drivers     0

%else

    %define server_drivers     1

%endif

# Always build with dlopen'd modules

%define with_driver_modules 1

# Now set the defaults for all the important features, independent

# of any particular OS

# First the daemon itself

%define with_libvirtd      0%{!?_without_libvirtd:%{server_drivers}}

%define with_avahi         0%{!?_without_avahi:%{server_drivers}}

# Then the hypervisor drivers that run in libvirtd

%define with_xen           0%{!?_without_xen:%{server_drivers}}

%define with_qemu          0%{!?_without_qemu:%{server_drivers}}

%define with_lxc           0%{!?_without_lxc:%{server_drivers}}

%define with_uml           0%{!?_without_uml:%{server_drivers}}

%define with_libxl         0%{!?_without_libxl:%{server_drivers}}

%define with_qemu_tcg      %{with_qemu}

# Change if we ever provide qemu-kvm binaries on non-x86 hosts

%if 0%{?fedora} >= 18

    %define qemu_kvm_arches    %{ix86} x86_64 ppc64 s390x

%else

    %define qemu_kvm_arches    %{ix86} x86_64

%endif

%ifarch %{qemu_kvm_arches}

    %define with_qemu_kvm      %{with_qemu}

%else

    %define with_qemu_kvm      0

%endif

# Then the hypervisor drivers that run outside libvirtd, in libvirt.so

%define with_openvz        0%{!?_without_openvz:1}

%define with_vbox          0%{!?_without_vbox:1}

%define with_vmware        0%{!?_without_vmware:1}

%define with_phyp          0%{!?_without_phyp:1}

%define with_esx           0%{!?_without_esx:1}

%define with_hyperv        0%{!?_without_hyperv:1}

%define with_xenapi        0%{!?_without_xenapi:1}

%define with_parallels     0%{!?_without_parallels:1}

# Then the secondary host drivers, which run inside libvirtd

%define with_interface        0%{!?_without_interface:%{server_drivers}}

%define with_network          0%{!?_without_network:%{server_drivers}}

%define with_storage_fs       0%{!?_without_storage_fs:%{server_drivers}}

%define with_storage_lvm      0%{!?_without_storage_lvm:%{server_drivers}}

%define with_storage_iscsi    0%{!?_without_storage_iscsi:%{server_drivers}}

%define with_storage_disk     0%{!?_without_storage_disk:%{server_drivers}}

%define with_storage_mpath    0%{!?_without_storage_mpath:%{server_drivers}}

%if 0%{?fedora} >= 16

    %define with_storage_rbd      0%{!?_without_storage_rbd:%{server_drivers}}

%else

    %define with_storage_rbd      0

%endif

%if 0%{?fedora} >= 17

    %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:%{server_drivers}}

%else

    %define with_storage_sheepdog 0

%endif

%define with_numactl          0%{!?_without_numactl:%{server_drivers}}

%define with_selinux          0%{!?_without_selinux:%{server_drivers}}

# A few optional bits off by default, we enable later

%define with_polkit        0%{!?_without_polkit:0}

%define with_capng         0%{!?_without_capng:0}

%define with_fuse          0%{!?_without_fuse:0}

%define with_netcf         0%{!?_without_netcf:0}

%define with_udev          0%{!?_without_udev:0}

%define with_hal           0%{!?_without_hal:0}

%define with_yajl          0%{!?_without_yajl:0}

%define with_nwfilter      0%{!?_without_nwfilter:0}

%define with_libpcap       0%{!?_without_libpcap:0}

%define with_macvtap       0%{!?_without_macvtap:0}

%define with_libnl         0%{!?_without_libnl:0}

%define with_audit         0%{!?_without_audit:0}

%define with_dtrace        0%{!?_without_dtrace:0}

%define with_cgconfig      0%{!?_without_cgconfig:0}

%define with_sanlock       0%{!?_without_sanlock:0}

%define with_systemd       0%{!?_without_systemd:0}

%define with_numad         0%{!?_without_numad:0}

%define with_firewalld     0%{!?_without_firewalld:0}

%define with_libssh2       0%{!?_without_libssh2:0}

# Non-server/HV driver defaults which are always enabled

%define with_python        0%{!?_without_python:1}

%define with_sasl          0%{!?_without_sasl:1}

# Finally set the OS / architecture specific special cases

# Xen is available only on i386 x86_64 ia64

%ifnarch %{ix86} x86_64 ia64

    %define with_xen 0

    %define with_libxl 0

%endif

# Numactl is not available on s390[x] and ARM

%ifarch s390 s390x %{arm}

    %define with_numactl 0

%endif

# RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor,

# VMWare, libxenserver (xenapi), libxenlight (Xen 4.1 and newer),

# or HyperV.

%if 0%{?rhel}

    %define with_openvz 0

    %define with_vbox 0

    %define with_uml 0

    %define with_phyp 0

    %define with_vmware 0

    %define with_xenapi 0

    %define with_libxl 0

    %define with_hyperv 0

    %define with_parallels 0

%endif

# Fedora 17 / RHEL-7 are first where we use systemd. Although earlier

# Fedora has systemd, libvirt still used sysvinit there.

%if 0%{?fedora} >= 17 || 0%{?rhel} >= 7

    %define with_systemd 1

%endif

# Fedora 18 / RHEL-7 are first where firewalld support is enabled

%if 0%{?fedora} >= 17 || 0%{?rhel} >= 7

    %define with_firewalld 1

%endif

# RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC

%if 0%{?rhel} == 5

    %define with_qemu_tcg 0

    %ifnarch x86_64

        %define with_qemu 0

        %define with_qemu_kvm 0

    %endif

    %define with_lxc 0

%endif

# RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen

# on all archs. Other archs all have LXC available though

%if 0%{?rhel} >= 6

    %define with_qemu_tcg 0

    %ifnarch x86_64

        %define with_qemu 0

        %define with_qemu_kvm 0

    %endif

    %define with_xen 0

%endif

# Fedora doesn't have any QEMU on ppc64 until FC16 - only ppc

%if 0%{?fedora} && 0%{?fedora} < 16

    %ifarch ppc64

        %define with_qemu 0

    %endif

%endif

# Fedora doesn't have new enough Xen for libxl until F18

%if 0%{?fedora} && 0%{?fedora} < 18

    %define with_libxl 0

%endif

# PolicyKit was introduced in Fedora 8 / RHEL-6 or newer

%if 0%{?fedora} >= 8 || 0%{?rhel} >= 6

    %define with_polkit    0%{!?_without_polkit:1}

%endif

# libcapng is used to manage capabilities in Fedora 12 / RHEL-6 or newer

%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6

    %define with_capng     0%{!?_without_capng:1}

%endif

# fuse is used to provide virtualized /proc for LXC

%if 0%{?fedora} >= 17 || 0%{?rhel} >= 7

    %define with_fuse      0%{!?_without_fuse:1}

%endif

# netcf is used to manage network interfaces in Fedora 12 / RHEL-6 or newer

%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6

    %define with_netcf     0%{!?_without_netcf:%{server_drivers}}

%endif

# udev is used to manage host devices in Fedora 12 / RHEL-6 or newer

%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6

    %define with_udev     0%{!?_without_udev:%{server_drivers}}

%else

    %define with_hal       0%{!?_without_hal:%{server_drivers}}

%endif

# interface requires netcf

%if ! 0%{?with_netcf}

    %define with_interface     0

%endif

# Enable yajl library for JSON mode with QEMU

%if 0%{?fedora} >= 13 || 0%{?rhel} >= 6

    %define with_yajl     0%{!?_without_yajl:%{server_drivers}}

%endif

# Enable sanlock library for lock management with QEMU

# Sanlock is available only on i686 x86_64 for RHEL

%if 0%{?fedora} >= 16

    %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}

%endif

%if 0%{?rhel} >= 6

    %ifarch %{ix86} x86_64

        %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}

    %endif

%endif

# Enable libssh2 transport for new enough distros

%if 0%{?fedora} >= 17 || 0%{?rhel} >= 6

    %define with_libssh2 0%{!?_without_libssh2:1}

%endif

# Disable some drivers when building without libvirt daemon.

# The logic is the same as in configure.ac

%if ! %{with_libvirtd}

    %define with_interface 0

    %define with_network 0

    %define with_qemu 0

    %define with_lxc 0

    %define with_uml 0

    %define with_hal 0

    %define with_udev 0

    %define with_storage_fs 0

    %define with_storage_lvm 0

    %define with_storage_iscsi 0

    %define with_storage_mpath 0

    %define with_storage_rbd 0

    %define with_storage_sheepdog 0

    %define with_storage_disk 0

%endif

%if %{with_qemu} || %{with_lxc} || %{with_uml}

    %define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}}

# Enable libpcap library

    %define with_libpcap  0%{!?_without_libpcap:%{server_drivers}}

    %define with_macvtap  0%{!?_without_macvtap:%{server_drivers}}

# numad is used to manage the CPU and memory placement dynamically,

# it's not available on s390[x] and ARM.

    %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6

        %ifnarch s390 s390x %{arm}

            %define with_numad    0%{!?_without_numad:%{server_drivers}}

        %endif

    %endif

%endif

%if %{with_macvtap}

    %define with_libnl 1

%endif

%if 0%{?fedora} >= 11 || 0%{?rhel} >= 5

    %define with_audit    0%{!?_without_audit:1}

%endif

%if 0%{?fedora} >= 13 || 0%{?rhel} >= 6

    %define with_dtrace 1

%endif

# Pull in cgroups config system

%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6

    %if %{with_qemu} || %{with_lxc}

        %define with_cgconfig 0%{!?_without_cgconfig:1}

    %endif

%endif

%if %{with_udev} || %{with_hal}

    %define with_nodedev 1

%else

    %define with_nodedev 0

%endif

%if %{with_storage_fs} || %{with_storage_mpath} || %{with_storage_iscsi} || %{with_storage_lvm} || %{with_storage_disk}

    %define with_storage 1

%else

    %define with_storage 0

%endif

# Force QEMU to run as non-root

%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6

    %define qemu_user  qemu

    %define qemu_group  qemu

%else

    %define qemu_user  root

    %define qemu_group  root

%endif

# The RHEL-5 Xen package has some feature backports. This

# flag is set to enable use of those special bits on RHEL-5

%if 0%{?rhel} == 5

    %define with_rhel5  1

%else

    %define with_rhel5  0

%endif

%if 0%{?fedora} >= 18 || 0%{?rhel} >= 7

    %define with_systemd_macros 1

%else

    %define with_systemd_macros 0

%endif

Summary: Library providing a simple virtualization API

Name: libvirt

Version: 1.0.2

Release: 2%{?dist}%{?extra_release}

License: LGPLv2+

Group: Development/Libraries

BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root

URL: http://libvirt.org/

%if %(echo %{version} | grep -o \\. | wc -l) == 3

    %define mainturl stable_updates/

%endif

Source: http://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.gz

Patch1: 0001-complete-virterror-virerror-name-change.patch

Patch2: 0001-Fix-missing-error-constants-in-libvirt-python-module.patch

%if %{with_libvirtd}

Requires: libvirt-daemon = %{version}-%{release}

    %if %{with_network}

Requires: libvirt-daemon-config-network = %{version}-%{release}

    %endif

    %if %{with_nwfilter}

Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}

    %endif

    %if %{with_driver_modules}

        %if %{with_libxl}

Requires: libvirt-daemon-driver-libxl = %{version}-%{release}

        %endif

        %if %{with_lxc}

Requires: libvirt-daemon-driver-lxc = %{version}-%{release}

        %endif

        %if %{with_qemu}

Requires: libvirt-daemon-driver-qemu = %{version}-%{release}

        %endif

        %if %{with_uml}

Requires: libvirt-daemon-driver-uml = %{version}-%{release}

        %endif

        %if %{with_xen}

Requires: libvirt-daemon-driver-xen = %{version}-%{release}

        %endif

Requires: libvirt-daemon-driver-interface = %{version}-%{release}

Requires: libvirt-daemon-driver-secret = %{version}-%{release}

Requires: libvirt-daemon-driver-storage = %{version}-%{release}

Requires: libvirt-daemon-driver-network = %{version}-%{release}

Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}

Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

    %endif

%endif

Requires: libvirt-client = %{version}-%{release}

# All build-time requirements. Run-time requirements are

# listed against each sub-RPM

%if 0%{?enable_autotools}

BuildRequires: autoconf

BuildRequires: automake

BuildRequires: gettext-devel

BuildRequires: libtool

%endif

BuildRequires: python-devel

%if %{with_systemd}

BuildRequires: systemd-units

%endif

%if %{with_xen}

BuildRequires: xen-devel

%endif

BuildRequires: libxml2-devel

BuildRequires: xhtml1-dtds

BuildRequires: libxslt

BuildRequires: readline-devel

BuildRequires: ncurses-devel

BuildRequires: gettext

BuildRequires: libtasn1-devel

BuildRequires: gnutls-devel

BuildRequires: libattr-devel

%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6

# for augparse, optionally used in testing

BuildRequires: augeas

%endif

%if %{with_hal}

BuildRequires: hal-devel

%endif

%if %{with_udev}

    %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7

BuildRequires: systemd-devel >= 185

    %else

BuildRequires: libudev-devel >= 145

    %endif

BuildRequires: libpciaccess-devel >= 0.10.9

%endif

%if %{with_yajl}

BuildRequires: yajl-devel

%endif

%if %{with_sanlock}

# make sure libvirt is built with new enough sanlock on

# distros that have it; required for on_lockfailure

    %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6

BuildRequires: sanlock-devel >= 2.4

    %else

BuildRequires: sanlock-devel >= 1.8

    %endif

%endif

%if %{with_libpcap}

BuildRequires: libpcap-devel

%endif

%if %{with_libnl}

    %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7

BuildRequires: libnl3-devel

    %else

BuildRequires: libnl-devel

    %endif

%endif

%if %{with_avahi}

BuildRequires: avahi-devel

%endif

%if %{with_selinux}

BuildRequires: libselinux-devel

%endif

%if %{with_network}

BuildRequires: dnsmasq >= 2.41

BuildRequires: iptables

BuildRequires: iptables-ipv6

BuildRequires: radvd

%endif

%if %{with_nwfilter}

BuildRequires: ebtables

%endif

BuildRequires: module-init-tools

%if %{with_sasl}

BuildRequires: cyrus-sasl-devel

%endif

%if %{with_polkit}

    %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6

# Only need the binary, not -devel

BuildRequires: polkit >= 0.93

    %else

BuildRequires: PolicyKit-devel >= 0.6

    %endif

%endif

%if %{with_storage_fs}

# For mount/umount in FS driver

BuildRequires: util-linux

%endif

%if %{with_qemu}

# From QEMU RPMs

BuildRequires: /usr/bin/qemu-img

%else

    %if %{with_xen}

# From Xen RPMs

BuildRequires: /usr/sbin/qcow-create

    %endif

%endif

%if %{with_storage_lvm}

# For LVM drivers

BuildRequires: lvm2

%endif

%if %{with_storage_iscsi}

# For ISCSI driver

BuildRequires: iscsi-initiator-utils

%endif

%if %{with_storage_disk}

# For disk driver

BuildRequires: parted-devel

    %if 0%{?rhel} == 5

# Broken RHEL-5 parted RPM is missing a dep

BuildRequires: e2fsprogs-devel

    %endif

%endif

%if %{with_storage_mpath}

# For Multipath support

    %if 0%{?rhel} == 5

# Broken RHEL-5 packaging has header files in main RPM :-(

BuildRequires: device-mapper

    %else

BuildRequires: device-mapper-devel

    %endif

    %if %{with_storage_rbd}

BuildRequires: ceph-devel

    %endif

%endif

%if %{with_numactl}

# For QEMU/LXC numa info

BuildRequires: numactl-devel

%endif

%if %{with_capng}

BuildRequires: libcap-ng-devel >= 0.5.0

%endif

%if %{with_fuse}

BuildRequires: fuse-devel >= 2.8.6

%endif

%if %{with_phyp} || %{with_libssh2}

BuildRequires: libssh2-devel >= 1.3.0

%endif

%if %{with_netcf}

    %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7

BuildRequires: netcf-devel >= 0.2.2

    %else

        %if 0%{?fedora} >= 16 || 0%{?rhel} >= 6

BuildRequires: netcf-devel >= 0.1.8

        %else

BuildRequires: netcf-devel >= 0.1.4

        %endif

    %endif

%endif

%if %{with_esx}

    %if 0%{?fedora} >= 9 || 0%{?rhel} >= 6

BuildRequires: libcurl-devel

    %else

BuildRequires: curl-devel

    %endif

%endif

%if %{with_hyperv}

BuildRequires: libwsman-devel >= 2.2.3

%endif

%if %{with_audit}

BuildRequires: audit-libs-devel

%endif

%if %{with_dtrace}

# we need /usr/sbin/dtrace

BuildRequires: systemtap-sdt-devel

%endif

%if %{with_storage_fs}

# For mount/umount in FS driver

BuildRequires: util-linux

# For showmount in FS driver (netfs discovery)

BuildRequires: nfs-utils

%endif

%if %{with_firewalld}

# Communication with the firewall daemon uses DBus

BuildRequires: dbus-devel

%endif

# Fedora build root suckage

BuildRequires: gawk

# For storage wiping with different algorithms

BuildRequires: scrub

%if %{with_numad}

BuildRequires: numad

%endif

Provides: bundled(gnulib)

%description

Libvirt is a C toolkit to interact with the virtualization capabilities

of recent versions of Linux (and other OSes). The main package includes

the libvirtd server exporting the virtualization support.

%package docs

Summary: API reference and website documentation

Group: Development/Libraries

%description docs

Includes the API reference for the libvirt C library, and a complete

copy of the libvirt.org website documentation.

%if %{with_libvirtd}

%package daemon

Summary: Server side daemon and supporting files for libvirt library

Group: Development/Libraries

# All runtime requirements for the libvirt package (runtime requrements

# for subpackages are listed later in those subpackages)

# The client side, i.e. shared libs and virsh are in a subpackage

Requires: %{name}-client = %{version}-%{release}

# for modprobe of pci devices

Requires: module-init-tools

# for /sbin/ip & /sbin/tc

Requires: iproute

    %if %{with_avahi}

        %if 0%{?rhel} == 5

Requires: avahi

        %else

Requires: avahi-libs

        %endif

    %endif

    %if %{with_network}

Requires: dnsmasq >= 2.41

Requires: radvd

    %endif

    %if %{with_network} || %{with_nwfilter}

Requires: iptables

Requires: iptables-ipv6

    %endif

    %if %{with_nwfilter}

Requires: ebtables

    %endif

    %if %{with_netcf} && (0%{?fedora} >= 18 || 0%{?rhel} >= 7)

Requires: netcf-libs >= 0.2.2

    %endif

# needed for device enumeration

    %if %{with_hal}

Requires: hal

    %endif

    %if %{with_udev}

        %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7

Requires: systemd >= 185

        %else

Requires: udev >= 145

        %endif

    %endif

    %if %{with_polkit}

        %if 0%{?fedora} >= 12 || 0%{?rhel} >=6

Requires: polkit >= 0.93

        %else

Requires: PolicyKit >= 0.6

        %endif

    %endif

    %if %{with_storage_fs}

Requires: nfs-utils

# For mkfs

Requires: util-linux

# For pool-build probing for existing pools

BuildRequires: libblkid-devel >= 2.17

# For glusterfs

        %if 0%{?fedora} >= 11

Requires: glusterfs-client >= 2.0.1

        %endif

    %endif

    %if %{with_qemu}

# From QEMU RPMs

Requires: /usr/bin/qemu-img

# For image compression

Requires: gzip

Requires: bzip2

Requires: lzop

Requires: xz

    %else

        %if %{with_xen}

# From Xen RPMs

Requires: /usr/sbin/qcow-create

        %endif

    %endif

    %if %{with_storage_lvm}

# For LVM drivers

Requires: lvm2

    %endif

    %if %{with_storage_iscsi}

# For ISCSI driver

Requires: iscsi-initiator-utils

    %endif

    %if %{with_storage_disk}

# For disk driver

Requires: parted

Requires: device-mapper

    %endif

    %if %{with_storage_mpath}

# For multipath support

Requires: device-mapper

    %endif

    %if %{with_storage_sheepdog}

# For Sheepdog support

Requires: sheepdog

    %endif

    %if %{with_cgconfig}

Requires: libcgroup

    %endif

    %ifarch %{ix86} x86_64 ia64

# For virConnectGetSysinfo

Requires: dmidecode

    %endif

# For service management

    %if %{with_systemd}

Requires(post): systemd-units

Requires(post): systemd-sysv

Requires(preun): systemd-units

Requires(postun): systemd-units

    %endif

    %if %{with_numad}

Requires: numad

    %endif

# libvirtd depends on 'messagebus' service

Requires: dbus

%description daemon

Server side daemon required to manage the virtualization capabilities

of recent versions of Linux. Requires a hypervisor specific sub-RPM

for specific drivers.

    %if %{with_network}

%package daemon-config-network

Summary: Default configuration files for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%description daemon-config-network

Default configuration files for setting up NAT based networking

    %endif

    %if %{with_nwfilter}

%package daemon-config-nwfilter

Summary: Network filter configuration files for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%description daemon-config-nwfilter

Network filter configuration files for cleaning guest traffic

    %endif

    %if %{with_driver_modules}

        %if %{with_network}

%package daemon-driver-network

Summary: Network driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%description daemon-driver-network

The network driver plugin for the libvirtd daemon, providing

an implementation of the virtual network APIs using the Linux

bridge capabilities.

        %endif

        %if %{with_nwfilter}

%package daemon-driver-nwfilter

Summary: Nwfilter driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%description daemon-driver-nwfilter

The nwfilter driver plugin for the libvirtd daemon, providing

an implementation of the firewall APIs using the ebtables,

iptables and ip6tables capabilities

        %endif

        %if %{with_nodedev}

%package daemon-driver-nodedev

Summary: Nodedev driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%description daemon-driver-nodedev

The nodedev driver plugin for the libvirtd daemon, providing

an implementation of the node device APIs using the udev

capabilities.

        %endif

        %if %{with_interface}

%package daemon-driver-interface

Summary: Interface driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%description daemon-driver-interface

The interface driver plugin for the libvirtd daemon, providing

an implementation of the network interface APIs using the

netcf library

        %endif

%package daemon-driver-secret

Summary: Secret driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%description daemon-driver-secret

The secret driver plugin for the libvirtd daemon, providing

an implementation of the secret key APIs.

        %if %{with_storage}

%package daemon-driver-storage

Summary: Storage driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%description daemon-driver-storage

The storage driver plugin for the libvirtd daemon, providing

an implementation of the storage APIs using LVM, iSCSI,

parted and more.

        %endif

        %if %{with_qemu}

%package daemon-driver-qemu

Summary: Qemu driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

# There really is a hard cross-driver dependency here

Requires: libvirt-daemon-driver-network = %{version}-%{release}

%description daemon-driver-qemu

The qemu driver plugin for the libvirtd daemon, providing

an implementation of the hypervisor driver APIs using

QEMU

        %endif

        %if %{with_lxc}

%package daemon-driver-lxc

Summary: LXC driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

# There really is a hard cross-driver dependency here

Requires: libvirt-daemon-driver-network = %{version}-%{release}

%description daemon-driver-lxc

The LXC driver plugin for the libvirtd daemon, providing

an implementation of the hypervisor driver APIs using

the Linux kernel

        %endif

        %if %{with_uml}

%package daemon-driver-uml

Summary: Uml driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%description daemon-driver-uml

The UML driver plugin for the libvirtd daemon, providing

an implementation of the hypervisor driver APIs using

User Mode Linux

        %endif

        %if %{with_xen}

%package daemon-driver-xen

Summary: Xen driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%description daemon-driver-xen

The Xen driver plugin for the libvirtd daemon, providing

an implementation of the hypervisor driver APIs using

Xen

        %endif