From 16e60d9443ebe87df0cecac9a22df6e0440b805d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ale=C5=A1=20Nesrsta?= <starous@volny.cz>
Date: Fri, 12 Apr 2013 20:42:46 +0200
Subject: [PATCH 292/482] Fix handling of split transfers.
---
ChangeLog | 4 ++++
grub-core/bus/usb/ehci.c | 25 ++++++++++-------------
grub-core/bus/usb/usbhub.c | 50 +++++++++++++++++++++++++++++++++++++++-------
include/grub/usb.h | 4 ++--
4 files changed, 59 insertions(+), 24 deletions(-)
diff --git a/ChangeLog b/ChangeLog
index 79563b8..e8e4569 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,7 @@
+2013-04-12 Aleš Nesrsta <starous@volny.cz>
+
+ Fix handling of split transfers.
+
2013-04-12 Vladimir Serbinenko <phcoder@gmail.com>
* grub-core/net/http.c: Fix bad free.
diff --git a/grub-core/bus/usb/ehci.c b/grub-core/bus/usb/ehci.c
index e902fcd..18b12b2 100644
--- a/grub-core/bus/usb/ehci.c
+++ b/grub-core/bus/usb/ehci.c
@@ -798,7 +798,7 @@ grub_ehci_pci_iter (grub_pci_device_t dev, grub_pci_id_t pciid,
/* Set ownership of root hub ports to EHCI */
grub_ehci_oper_write32 (e, GRUB_EHCI_CONFIG_FLAG, GRUB_EHCI_CF_EHCI_OWNER);
- /* Enable asynchronous list */
+ /* Enable both lists */
grub_ehci_oper_write32 (e, GRUB_EHCI_COMMAND,
GRUB_EHCI_CMD_AS_ENABL
| GRUB_EHCI_CMD_PS_ENABL
@@ -942,9 +942,9 @@ grub_ehci_setup_qh (grub_ehci_qh_t qh, grub_usb_transfer_t transfer)
* SplitCompletionMask - AFAIK it is ignored in asynchronous list,
* InterruptScheduleMask - AFAIK it should be zero in async. list */
ep_cap |= GRUB_EHCI_MULT_THREE;
- ep_cap |= (transfer->dev->port << GRUB_EHCI_DEVPORT_OFF)
+ ep_cap |= (transfer->dev->split_hubport << GRUB_EHCI_DEVPORT_OFF)
& GRUB_EHCI_DEVPORT_MASK;
- ep_cap |= (transfer->dev->hubaddr << GRUB_EHCI_HUBADDR_OFF)
+ ep_cap |= (transfer->dev->split_hubaddr << GRUB_EHCI_HUBADDR_OFF)
& GRUB_EHCI_HUBADDR_MASK;
if (transfer->dev->speed == GRUB_USB_SPEED_LOW
&& transfer->type != GRUB_USB_TRANSACTION_TYPE_CONTROL)
@@ -1261,16 +1261,6 @@ grub_ehci_setup_transfer (grub_usb_controller_t dev,
/* XXX: Fix it: Currently we don't do anything to restart EHCI */
return GRUB_USB_ERR_INTERNAL;
- /* Check if transfer is not high speed and connected to root hub.
- * It should not happened but... */
- if ((transfer->dev->speed != GRUB_USB_SPEED_HIGH)
- && !transfer->dev->hubaddr)
- {
- grub_error (GRUB_USB_ERR_BADDEVICE,
- "FULL/LOW speed device on EHCI port!?!");
- return GRUB_USB_ERR_BADDEVICE;
- }
-
/* Allocate memory for controller transfer data. */
cdata = grub_malloc (sizeof (*cdata));
if (!cdata)
@@ -1887,13 +1877,18 @@ grub_ehci_fini_hw (int noreturn __attribute__ ((unused)))
/* We should disable all EHCI HW to prevent any DMA access etc. */
for (e = ehci; e; e = e->next)
{
+ /* Disable both lists */
+ grub_ehci_oper_write32 (e, GRUB_EHCI_COMMAND,
+ ~(GRUB_EHCI_CMD_AS_ENABL | GRUB_EHCI_CMD_PS_ENABL)
+ & grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND));
+
/* Check if EHCI is halted and halt it if not */
if (grub_ehci_halt (e) != GRUB_USB_ERR_NONE)
- grub_error (GRUB_ERR_TIMEOUT, "restore_hw: EHCI halt timeout");
+ grub_error (GRUB_ERR_TIMEOUT, "fini_hw: EHCI halt timeout");
/* Reset EHCI */
if (grub_ehci_reset (e) != GRUB_USB_ERR_NONE)
- grub_error (GRUB_ERR_TIMEOUT, "restore_hw: EHCI reset timeout");
+ grub_error (GRUB_ERR_TIMEOUT, "fini_hw: EHCI reset timeout");
}
return GRUB_USB_ERR_NONE;
diff --git a/grub-core/bus/usb/usbhub.c b/grub-core/bus/usb/usbhub.c
index 6fc9d02..e3b7d40 100644
--- a/grub-core/bus/usb/usbhub.c
+++ b/grub-core/bus/usb/usbhub.c
@@ -49,7 +49,7 @@ static grub_usb_controller_dev_t grub_usb_list;
static grub_usb_device_t
grub_usb_hub_add_dev (grub_usb_controller_t controller,
grub_usb_speed_t speed,
- int port, int hubaddr)
+ int split_hubport, int split_hubaddr)
{
grub_usb_device_t dev;
int i;
@@ -63,8 +63,8 @@ grub_usb_hub_add_dev (grub_usb_controller_t controller,
dev->controller = *controller;
dev->speed = speed;
- dev->port = port;
- dev->hubaddr = hubaddr;
+ dev->split_hubport = split_hubport;
+ dev->split_hubaddr = split_hubaddr;
err = grub_usb_device_initialize (dev);
if (err)
@@ -108,8 +108,8 @@ grub_usb_hub_add_dev (grub_usb_controller_t controller,
grub_dprintf ("usb", "Added new usb device: %p, addr=%d\n",
dev, i);
- grub_dprintf ("usb", "speed=%d, port=%d, hubaddr=%d\n",
- speed, port, hubaddr);
+ grub_dprintf ("usb", "speed=%d, split_hubport=%d, split_hubaddr=%d\n",
+ speed, split_hubport, split_hubaddr);
/* Wait "recovery interval", spec. says 2ms */
grub_millisleep (2);
@@ -219,7 +219,12 @@ attach_root_port (struct grub_usb_hub *hub, int portno,
grub_boot_time ("Port enabled");
/* Enable the port and create a device. */
- dev = grub_usb_hub_add_dev (hub->controller, speed, portno, 0);
+ /* High speed device needs not transaction translation
+ and full/low speed device cannot be connected to EHCI root hub
+ and full/low speed device connected to OHCI/UHCI needs not
+ transaction translation - e.g. hubport and hubaddr should be
+ always none (zero) for any device connected to any root hub. */
+ dev = grub_usb_hub_add_dev (hub->controller, speed, 0, 0);
hub->controller->dev->pending_reset = 0;
npending--;
if (! dev)
@@ -593,6 +598,8 @@ poll_nonroot_hub (grub_usb_device_t dev)
{
grub_usb_speed_t speed;
grub_usb_device_t next_dev;
+ int split_hubport = 0;
+ int split_hubaddr = 0;
/* Determine the device speed. */
if (status & GRUB_USB_HUB_STATUS_PORT_LOWSPEED)
@@ -608,8 +615,37 @@ poll_nonroot_hub (grub_usb_device_t dev)
/* Wait a recovery time after reset, spec. says 10ms */
grub_millisleep (10);
+ /* Find correct values for SPLIT hubport and hubaddr */
+ if (speed == GRUB_USB_SPEED_HIGH)
+ {
+ /* HIGH speed device needs not transaction translation */
+ split_hubport = 0;
+ split_hubaddr = 0;
+ }
+ else
+ /* FULL/LOW device needs hub port and hub address
+ for transaction translation (if connected to EHCI) */
+ if (dev->speed == GRUB_USB_SPEED_HIGH)
+ {
+ /* This port is the first FULL/LOW speed port
+ in the chain from root hub. Attached device
+ should use its port number and hub address */
+ split_hubport = i;
+ split_hubaddr = dev->addr;
+ }
+ else
+ {
+ /* This port is NOT the first FULL/LOW speed port
+ in the chain from root hub. Attached device
+ should use values inherited from some parent
+ HIGH speed hub - if any. */
+ split_hubport = dev->split_hubport;
+ split_hubaddr = dev->split_hubaddr;
+ }
+
/* Add the device and assign a device address to it. */
- next_dev = grub_usb_hub_add_dev (&dev->controller, speed, i, dev->addr);
+ next_dev = grub_usb_hub_add_dev (&dev->controller, speed,
+ split_hubport, split_hubaddr);
if (dev->controller.dev->pending_reset)
{
dev->controller.dev->pending_reset = 0;
diff --git a/include/grub/usb.h b/include/grub/usb.h
index 9e2c221..1cc9942 100644
--- a/include/grub/usb.h
+++ b/include/grub/usb.h
@@ -225,9 +225,9 @@ struct grub_usb_device
struct grub_usb_desc_endp *hub_endpoint;
/* EHCI Split Transfer information */
- int port;
+ int split_hubport;
- int hubaddr;
+ int split_hubaddr;
};
--
1.8.2.1