# Turn off the brp-python-bytecompile script

%global __os_install_post %(echo '%{__os_install_post}' | sed -e 's!/usr/lib[^[:space:]]*/brp-python-bytecompile[[:space:]].*$!!g')

Summary: Mailing list manager with built in Web access

Name: mailman

Version: 2.1.15

Release: 26%{?dist}.1

Epoch: 3

Group: Applications/Internet

Source0: ftp://ftp.gnu.org/pub/gnu/mailman/mailman-%{version}.tgz

#Source0: http://prdownloads.sourceforge.net/mailman/mailman-%{version}.tgz

Source1: mm_cfg.py

Source3: httpd-mailman.conf

Source4: mailman.logrotate

Source5: mailman.INSTALL.REDHAT.in

Source6: mailman-crontab-edit

Source7: mailman-migrate-fhs

Source8: mailman-update-cfg

Source9: mailman-tmpfiles.conf

Source10: mailman.service

Patch1: mailman-2.1.12-multimail.patch

Patch2: mailman-2.1-build.patch

Patch3: mailman-2.1-mailmanctl-status.patch

Patch4: mailman-2.1.11-cron.patch

Patch5: mailman-2.1.13-FHS.patch

Patch6: mailman-python-compile.patch

Patch7: mailman-2.1.13-archive-reply.patch

Patch8: mailman-2.1.9-LC_CTYPE.patch

Patch9: mailman-2.1.9-ctypo-new.patch

Patch10: mailman-2.1.10-ctypefix.patch

#Patch11: mailman-2.1.9-header-folding.patch

Patch12: mailman-2.1.9-selinux.patch

Patch13: mailman-2.1.9-unicode.patch

Patch14: mailman-2.1.11-fhsinit.patch

#Patch15: mailman-2.1.11-footer.patch

Patch17: mailman-2.1.12-mmcfg.patch

Patch18: mailman-2.1.12-initcleanup.patch

# the service is now off by default

Patch20: mailman-2.1.12-init-not-on.patch

Patch22: mailman-2.1.15-check_perms.patch

Patch23: mailman-2.1.12-dmarc.patch

Patch24: mailman-2.1.15-CVE-2015-2775.patch

# https://bugzilla.redhat.com/show_bug.cgi?id=1351939

Patch25: mailman-2.1.15-rh1351939.patch

Patch26: mailman-2.1.12-newlist-ja.patch

Patch27: mailman-2_1-xss_vulnerability.patch

License: GPLv2+

URL: http://www.list.org/

Requires(pre): shadow-utils, /sbin/chkconfig, /sbin/service

Requires: cronie, httpd, python, coreutils

Requires: python-dns

Requires(post): systemd

Requires(post): systemd-sysv

Requires(preun): systemd

Requires(postun): systemd

BuildRequires: automake

BuildRequires: python-devel

BuildRequires: systemd-units

%global contentdir /usr/share/httpd

# Installation directories

# rpmlint will give an error about hardcoded library path,

# but this is necessary, because there are python executables inside,

# which the user can run in their scripts. 

# see rhbz#226117 for more information

%global mmdir /usr/lib/%{name}

%global varmmdir /var/lib/%{name}

%global docdir /usr/share/doc/%{name}-%{version}

%global configdir /etc/%{name}

%global datadir %{varmmdir}/data

%global archivesdir %{varmmdir}/archives

%global lockdir /var/lock/%{name}

%global logdir /var/log/%{name}

%global piddir /var/run/%{name}

%global queuedir /var/spool/%{name}

%global templatedir %{configdir}/templates

%global httpdconfdir /etc/httpd/conf.d

%global restart_flag /var/run/%{name}-restart-after-rpm-install

%global mmbuilddir %{_builddir}/%{name}-%{version}

%global httpdconffile %{name}.conf

# Now, the user and group the CGIs will expect to be run under.  This should

# match the user and group the web server is configured to run as.  The scripts

# will error out if they are invoked by any other user.

%global cgiuser    apache

%global cgigroup   apache

# Now, the user and group the scripts will actually execute as.

%global mmuser       mailman

%global mmuserid     41

%global mmgroup      mailman

%global mmgroupid    41

# Directory/File modes & permissions

%global dirmode 2775

%global exemode 2755

# Now, the groups your mail spoolers run as.  Sendmail uses 'mail'(12)

# and postfix used to use 'nobody', but now uses 'postfix'

%global mailgroup  "mail postfix mailman nobody daemon"

# The mail wrapper program

%global mail_wrapper mailman

%description

Mailman is software to help manage email discussion lists, much like

Majordomo and Smartmail. Unlike most similar products, Mailman gives

each mailing list a webpage, and allows users to subscribe,

unsubscribe, etc. over the Web. Even the list manager can administer

his or her list entirely from the Web. Mailman also integrates most

things people want to do with mailing lists, including archiving, mail

<-> news gateways, and so on.

Documentation can be found in: %{docdir}

When the package has finished installing, you will need to perform some

additional installation steps, these are described in:

%{docdir}/INSTALL.REDHAT

%prep

%setup -q

%patch1 -p1 -b .multimail

%patch2 -p1 -b .permissions

%patch3 -p1 -b .status

%patch4 -p1 -b .cron

%patch5 -p1 -b .FHS

%patch6 -p1 -b .python-compile

%patch7 -p1 -b .archive-in-reply-to

%patch8 -p1 -b .lctype

%patch9 -p1 -b .ctypo

%patch10 -p1 -b .ctypefix

%patch12 -p1 -b .selinux

%patch13 -p1 -b .unicode

%patch14 -p1 -b .fhsinit

%patch17 -p1 -b .mmcfg

%patch18 -p1 -b .initcleanup

%patch20 -p1

%patch22 -p1

%patch23 -p1

%patch24 -p1

%patch25 -p0

%patch26 -p1

%patch27 -p1 -b .xss

# Change `#!/usr/bin/env python` shebang to `#!/usr/bin/python`

sed -i '1s|^#! */usr/bin/env python$|#!/usr/bin/python|' `find -iname '*.py'`

#cp $RPM_SOURCE_DIR/mailman.INSTALL.REDHAT.in INSTALL.REDHAT.in

cp %{SOURCE5} INSTALL.REDHAT.in

%build

CFLAGS="$RPM_OPT_FLAGS -fPIE -DPIE"; export CFLAGS

# Full relro

export LDFLAGS="$LDFLAGS -pie -Wl,-z,relro -Wl,-z,now"

rm -f configure

aclocal

autoconf

# rpmlint will give an error about hardcoded library path,

# but this is necessary, because there are python executables inside,

# which the user can run in their scripts. 

# see rhbz#226117 for more information

./configure \

        --libdir=/usr/lib \

        --prefix=%{mmdir} \

        --with-var-prefix=%{varmmdir} \

        --with-config-dir=%{configdir} \

        --with-lock-dir=%{lockdir} \

        --with-log-dir=%{logdir} \

        --with-pid-dir=%{piddir} \

        --with-queue-dir=%{queuedir} \

        --with-template-dir=%{templatedir} \

        --with-python=%{__python} \

        --with-mail-gid=%{mailgroup} \

        --with-cgi-id=%{cgiuser} \

        --with-cgi-gid=%{cgigroup} \

        --with-mailhost=localhost.localdomain \

        --with-urlhost=localhost.localdomain \

        --without-permcheck

function SubstituteParameters()

{

sed -e 's|@VAR_PREFIX@|%{varmmdir}|g' \

    -e 's|@VARMMDIR@|%{varmmdir}|g' \

    -e 's|@prefix@|%{mmdir}|g' \

    -e 's|@MMDIR@|%{mmdir}|g' \

    -e 's|@CONFIG_DIR@|%{configdir}|g' \

    -e 's|@DATA_DIR@|%{datadir}|g' \

    -e 's|@LOCK_DIR@|%{lockdir}|g' \

    -e 's|@LOG_DIR@|%{logdir}|g' \

    -e 's|@PID_DIR@|%{piddir}|g' \

    -e 's|@QUEUE_DIR@|%{queuedir}|g' \

    -e 's|@DOC_DIR@|%{docdir}|g' \

    -e 's|@HTTPD_CONF_DIR@|%{httpdconfdir}|g' \

    -e 's|@HTTPD_CONF_FILE@|%{httpdconffile}|g' \

    $1 > $2

}

SubstituteParameters "INSTALL.REDHAT.in" "INSTALL.REDHAT"

SubstituteParameters "%{SOURCE1}" "Mailman/mm_cfg.py.dist"

SubstituteParameters "%{SOURCE3}" "httpd-mailman.conf"

SubstituteParameters "%{SOURCE4}" "mailman.logrotate"

make

%install

# Normal install.

make DESTDIR=%{buildroot} install

#make install prefix=%{buildroot}%{mmdir} var_prefix=%{buildroot}%{varmmdir}

# Install the mailman cron.d script

mkdir -p %{buildroot}/etc/cron.d

cat > %{buildroot}/etc/cron.d/%{name} <

# DO NOT EDIT THIS FILE!

#

# Contents of this file managed by /etc/init.d/%{name}

# Master copy is %{mmdir}/cron/crontab.in

# Consult that file for documentation

EOF

# Copy the icons into the web server's icons directory.

mkdir -p %{buildroot}%{contentdir}/icons

cp %{buildroot}/%{mmdir}/icons/* %{buildroot}%{contentdir}/icons

# Create a link to the wrapper in /etc/smrsh to allow sendmail to run it.

# The link should be relative in order to make it work in chroot

mkdir -p %{buildroot}/etc/smrsh

ln -s ../..%{mmdir}/mail/%{mail_wrapper} %{buildroot}/etc/smrsh

# sitelist.cfg used to live in the DATA_DIR, now as part of the 

# FHS reoraganization it lives in the CONFIG_DIR. Most of the

# documentation refers to it in its DATA_DIR location and experienced

# admins will expect to find it there, so create a link in DATA_DIR to

# point to it in CONFIG_DIR so people aren't confused.

ln -s %{configdir}/sitelist.cfg %{buildroot}%{datadir}

# Install a logrotate control file.

mkdir -p %{buildroot}/etc/logrotate.d

install -m644 %{mmbuilddir}/mailman.logrotate %{buildroot}/etc/logrotate.d/%{name}

# Install the httpd configuration file.

install -m755 -d %{buildroot}%{httpdconfdir}

install -m644 %{mmbuilddir}/httpd-mailman.conf %{buildroot}%{httpdconfdir}/%{httpdconffile}

# Install the documentation files

install -m755 -d %{buildroot}%{docdir}

install -m644 %{mmbuilddir}/INSTALL.REDHAT   %{buildroot}%{docdir}

install -m644 %{mmbuilddir}/ACKNOWLEDGMENTS  %{buildroot}%{docdir}

install -m644 %{mmbuilddir}/FAQ              %{buildroot}%{docdir}

install -m644 %{mmbuilddir}/NEWS             %{buildroot}%{docdir}

install -m644 %{mmbuilddir}/README           %{buildroot}%{docdir}

install -m644 %{mmbuilddir}/README.CONTRIB   %{buildroot}%{docdir}

install -m644 %{mmbuilddir}/README-I18N.en   %{buildroot}%{docdir}

install -m644 %{mmbuilddir}/README.NETSCAPE  %{buildroot}%{docdir}

install -m644 %{mmbuilddir}/README.USERAGENT %{buildroot}%{docdir}

install -m644 %{mmbuilddir}/STYLEGUIDE.txt   %{buildroot}%{docdir}

install -m644 %{mmbuilddir}/UPGRADING        %{buildroot}%{docdir}

cp -r %{mmbuilddir}/contrib %{buildroot}%{docdir}

install -m644 %{SOURCE7} %{buildroot}%{docdir}/contrib/migrate-fhs

install -m755 -d %{buildroot}%{docdir}/admin

cp -r %{mmbuilddir}/doc %{buildroot}%{docdir}/admin

#install the script for updating the config (bz#484328)

mkdir -p %{buildroot}%{mmdir}/bin/

install -m755 %{SOURCE8} %{buildroot}%{mmdir}/bin/

# set library path in mailman-update-cfg script.

sed -i 's,@mmdir@,%{mmdir},g' %{buildroot}%{mmdir}/bin/mailman-update-cfg

# remove dir/files from %{buildroot} that we aren't shipping

rm -rf %{buildroot}%{varmmdir}/icons

# The file fblast confuses /usr/lib/rpm/find-requires because its an executable

# script file that does not have the interpreter as the first line, its not

# executable by itself so turn off its execute permissions

chmod 0644 %{buildroot}/%{mmdir}/tests/fblast.py

# Security issues...

#chmod 0755 %{buildroot}/%{mmdir}/pythonlib/japanese/c/_japanese_codecs.so

#chmod 0755 %{buildroot}/%{mmdir}/pythonlib/korean/c/hangul.so

#chmod 0755 %{buildroot}/%{mmdir}/pythonlib/korean/c/_koco.so

# Directories...

mkdir -p %{buildroot}/%{lockdir}

mkdir -p %{buildroot}/%{logdir}

mkdir -p %{buildroot}/%{piddir}

mkdir -p %{buildroot}/%{queuedir}

mkdir -p %{buildroot}/%{_tmpfilesdir}

install -m 0644 %{SOURCE9} %{buildroot}%{_tmpfilesdir}/%{name}.conf

# Systemd service file

mkdir -p %{buildroot}%{_unitdir}

install -m644 %{SOURCE10} %{buildroot}%{_unitdir}

# Move mm_cfg.py to /etc/mailman and create symlink to it

mkdir -p %{buildroot}%{configdir}

mv %{buildroot}%{mmdir}/Mailman/mm_cfg.py %{buildroot}%{configdir}

ln -s %{configdir}/mm_cfg.py %{buildroot}%{mmdir}/Mailman/

# Put README file into old templates directory to inform admins

# about change

cat > %{buildroot}%{mmdir}/templates/README <

Templates have been moved to %{templatedir}.

EOF

# byte-compile %{mmdir}

#py_byte_compile %{__python} %{buildroot}%{mmdir}

find %{buildroot}%{mmdir} -type f -a -name "*.py" -print0 | xargs -0 %{__python} -c 'import py_compile, sys; [py_compile.compile(f, dfile=f.partition("$RPM_BUILD_ROOT")[2]) for f in sys.argv[1:]]' || :

find %{buildroot}%{mmdir} -type f -a -name "*.py" -print0 | xargs -0 %{__python} -O -c 'import py_compile, sys; [py_compile.compile(f, dfile=f.partition("$RPM_BUILD_ROOT")[2]) for f in sys.argv[1:]]' || :

# Change permissions of directories to keep rpmlint silent

find %{buildroot}/%{mmdir} -type d -exec chmod 755 {} \;

find %{buildroot}/%{templatedir} -type d -exec chmod 755 {} \;

# There is no need for setgid bit in all files in those directories except cgi-bin

chmod %{buildroot}/%{mmdir} -s -R

# cgi-bin contains ELF executables which have to have setgid

chmod g+s %{buildroot}/%{mmdir}/cgi-bin/*

chmod g+s %{buildroot}/%{mmdir}/mail/mailman

# no need for setgid in configdir

chmod %{buildroot}/%{configdir}/* -s -R

%pre

# Make sure the user "mailman" exists on this system and has the correct values

if grep -q "^mailman:" /etc/group 2> /dev/null ; then

  /usr/sbin/groupmod -g %{mmgroupid} -n %{mmgroup} %{mmgroup} 2> /dev/null || :

else

  /usr/sbin/groupadd -g %{mmgroupid} %{mmgroup} 2> /dev/null || :

fi

if grep -q "^mailman:" /etc/passwd 2> /dev/null ; then

  /usr/sbin/usermod -s /sbin/nologin -c "GNU Mailing List Manager" -d %{mmdir} -u %{mmuserid} -g %{mmgroupid}       %{mmuser} 2> /dev/null || :

else

  /usr/sbin/useradd -s /sbin/nologin -c "GNU Mailing List Manager" -d %{mmdir} -u %{mmuserid} -g %{mmgroupid} -M -r %{mmuser} 2> /dev/null || :

fi

# Mailman should never be running during an install, but a package upgrade

# shouldn't silently stop the service, so if mailman was running

# we'll leave a temp file in the lock directory as a flag so in

# the post install phase we can restart it.

#

# rpmlint will complain here about "dangerous use of rm"

# but this is OK because we are only rm-ing our temporary file

if [ -d %{lockdir} ]; then

  rm -f %{restart_flag}

  /sbin/service %{name} status >/dev/null 2>&1

  if [ $? -eq 0 ]; then

      touch %{restart_flag}

      /sbin/service %{name} stop >/dev/null 2>&1

  fi

fi

# Remove older rpm-state dir

if [ -d %{_localstatedir}/lib/rpm-state/mailman ]; then

  rm -rf %{_localstatedir}/lib/rpm-state/mailman

fi

# Move mm_cfg.py to different location to be able to copy it to /etc/mailman

# later in post. This is needed, otherwise RPM would remove it.

mkdir -p %{_localstatedir}/lib/rpm-state/mailman/

if [ -L %{configdir}/mm_cfg.py -a ! -L %{mmdir}/Mailman/mm_cfg.py -a -d %{configdir} ]; then

  mv %{mmdir}/Mailman/mm_cfg.py %{_localstatedir}/lib/rpm-state/mailman/mm_cfg.py

fi

# Move templates dir to different location to be able to copy it to

# /etc/mailman later in post. This is needed, otherwise RPM would remove it.

if [ ! -d %{templatedir} -a -d %{mmdir}/templates ]; then

  mv %{mmdir}/templates %{_localstatedir}/lib/rpm-state/mailman/

fi

# rpm should not abort if last command run had non-zero exit status, exit cleanly

exit 0

%post

# We no longer use crontab, but previous versions of the spec file did, so clean up

if [ -f /var/spool/cron/%{mmuser} ]; then

  crontab -u %{mmuser} -r

fi

# Restart mailman if it had been running before installation

if [ -e %{restart_flag} ]; then

  rm %{restart_flag}

  /sbin/service %{name} start >/dev/null 2>&1

fi

# Move mm_cfg.py from /usr/lib/mailman/Mailman to /etc/mailman and create

# symlink to it (#905845).

if [ -f %{_localstatedir}/lib/rpm-state/mailman/mm_cfg.py ]; then

  cp -p %{_localstatedir}/lib/rpm-state/mailman/mm_cfg.py %{configdir}/mm_cfg.py

fi

# Move mmdir/templates to /etc/mailman/templates

if [ -d %{_localstatedir}/lib/rpm-state/mailman/templates ]; then

  cp -pr %{_localstatedir}/lib/rpm-state/mailman/templates/* %{templatedir}

  rm -rf %{_localstatedir}/lib/rpm-state/mailman/templates/

fi

if [ -d %{_localstatedir}/lib/rpm-state/mailman ]; then

  rm -rf %{_localstatedir}/lib/rpm-state/mailman

fi

# systemd

%systemd_post mailman.service

# rpm should not abort if last command run had non-zero exit status, exit cleanly

exit 0

%preun

# if [ $1 = 0 ]' checks that this is the actual deinstallation of

# the package, as opposed to just removing the old package on upgrade.

%systemd_preun mailman.service

# rpm should not abort if last command run had non-zero exit status, exit cleanly

exit 0

%postun

if [ $1 = 0 ]; then

  crontab -u %{mmuser} -r 2>/dev/null

fi

# systemd

%systemd_postun_with_restart mailman.service

# rpm should not abort if last command run had non-zero exit status, exit cleanly

exit 0

%triggerun -- mailman < 3:2.1.14-9

%{_bindir}/systemd-sysv-convert --save mailman >/dev/null 2>&1 ||:

/bin/systemctl enable mailman.service >/dev/null 2>&1

/sbin/chkconfig --del mailman >/dev/null 2>&1 || :

/bin/systemctl try-restart mailman.service >/dev/null 2>&1 || :

%files

%defattr(-,root,%{mmgroup})

%dir %{mmdir}

%dir %{mmdir}/Mailman

%{mmdir}/templates

%{mmdir}/bin

%dir %{mmdir}/cgi-bin/

%attr(2755, root, %{mmgroup}) %{mmdir}/cgi-bin/*

%dir %{mmdir}/cron

%{mmdir}/icons

%dir %{mmdir}/mail

%attr(2755, root, %{mmgroup}) %{mmdir}/mail/mailman

%{mmdir}/messages

%{mmdir}/pythonlib

%{mmdir}/scripts

# rpmlint will complain here about config files being in /usr

# but these are both data files -parts of mailman's web UI-

# and config files - user can change them to match the design

# and/or content of their web pages

%config(noreplace) %{templatedir}

%{mmdir}/tests

%dir %{varmmdir}

%{varmmdir}/data

%{varmmdir}/lists

%{varmmdir}/spam

%dir %{archivesdir}

%{archivesdir}/public

# fix for security issue #459530

%attr(2770,%{cgiuser},%{mmgroup}) %{archivesdir}/private

#cron dir minus one file which is listed later

%{mmdir}/cron/bumpdigests

%{mmdir}/cron/checkdbs

%{mmdir}/cron/cull_bad_shunt

%{mmdir}/cron/disabled

%{mmdir}/cron/gate_news

%{mmdir}/cron/mailpasswds

%{mmdir}/cron/nightly_gzip

%{mmdir}/cron/paths.py

%{mmdir}/cron/paths.pyc

%{mmdir}/cron/paths.pyo

%{mmdir}/cron/senddigests

#Mailman dir minus one file which is listed later

%{mmdir}/Mailman/Archiver

%{mmdir}/Mailman/Autoresponder.py

%{mmdir}/Mailman/Autoresponder.pyc

%{mmdir}/Mailman/Autoresponder.pyo

%{mmdir}/Mailman/Bouncer.py

%{mmdir}/Mailman/Bouncer.pyc

%{mmdir}/Mailman/Bouncer.pyo

%{mmdir}/Mailman/Bouncers

%{mmdir}/Mailman/Cgi

%{mmdir}/Mailman/Commands

%{mmdir}/Mailman/CSRFcheck.py

%{mmdir}/Mailman/CSRFcheck.pyc

%{mmdir}/Mailman/CSRFcheck.pyo

%{mmdir}/Mailman/Defaults.py

%{mmdir}/Mailman/Defaults.pyc

%{mmdir}/Mailman/Defaults.pyo

%{mmdir}/Mailman/Deliverer.py

%{mmdir}/Mailman/Deliverer.pyc

%{mmdir}/Mailman/Deliverer.pyo

%{mmdir}/Mailman/Digester.py

%{mmdir}/Mailman/Digester.pyc

%{mmdir}/Mailman/Digester.pyo

%{mmdir}/Mailman/Errors.py

%{mmdir}/Mailman/Errors.pyc

%{mmdir}/Mailman/Errors.pyo

%{mmdir}/Mailman/GatewayManager.py

%{mmdir}/Mailman/GatewayManager.pyc

%{mmdir}/Mailman/GatewayManager.pyo

#%%{mmdir}/Mailman/Generator.py

#%%{mmdir}/Mailman/Generator.pyc

#%%{mmdir}/Mailman/Generator.pyo

%{mmdir}/Mailman/Gui

%{mmdir}/Mailman/Handlers

%{mmdir}/Mailman/htmlformat.py

%{mmdir}/Mailman/htmlformat.pyc

%{mmdir}/Mailman/htmlformat.pyo

%{mmdir}/Mailman/HTMLFormatter.py

%{mmdir}/Mailman/HTMLFormatter.pyc

%{mmdir}/Mailman/HTMLFormatter.pyo

%{mmdir}/Mailman/i18n.py

%{mmdir}/Mailman/i18n.pyc

%{mmdir}/Mailman/i18n.pyo

%{mmdir}/Mailman/__init__.py

%{mmdir}/Mailman/__init__.pyc

%{mmdir}/Mailman/__init__.pyo

%{mmdir}/Mailman/ListAdmin.py

%{mmdir}/Mailman/ListAdmin.pyc

%{mmdir}/Mailman/ListAdmin.pyo

%{mmdir}/Mailman/LockFile.py

%{mmdir}/Mailman/LockFile.pyc

%{mmdir}/Mailman/LockFile.pyo

%{mmdir}/Mailman/Logging

%{mmdir}/Mailman/Mailbox.py

%{mmdir}/Mailman/Mailbox.pyc

%{mmdir}/Mailman/Mailbox.pyo

%{mmdir}/Mailman/MailList.py

%{mmdir}/Mailman/MailList.pyc

%{mmdir}/Mailman/MailList.pyo

%{mmdir}/Mailman/MemberAdaptor.py

%{mmdir}/Mailman/MemberAdaptor.pyc

%{mmdir}/Mailman/MemberAdaptor.pyo

%{mmdir}/Mailman/Message.py

%{mmdir}/Mailman/Message.pyc

%{mmdir}/Mailman/Message.pyo

%{mmdir}/Mailman/mm_cfg.py.dist

%{mmdir}/Mailman/MTA

%{mmdir}/Mailman/OldStyleMemberships.py

%{mmdir}/Mailman/OldStyleMemberships.pyc

%{mmdir}/Mailman/OldStyleMemberships.pyo

%{mmdir}/Mailman/Pending.py

%{mmdir}/Mailman/Pending.pyc

%{mmdir}/Mailman/Pending.pyo

%{mmdir}/Mailman/Post.py

%{mmdir}/Mailman/Post.pyc

%{mmdir}/Mailman/Post.pyo

%{mmdir}/Mailman/Queue

%{mmdir}/Mailman/SafeDict.py

%{mmdir}/Mailman/SafeDict.pyc

%{mmdir}/Mailman/SafeDict.pyo

%{mmdir}/Mailman/SecurityManager.py

%{mmdir}/Mailman/SecurityManager.pyc

%{mmdir}/Mailman/SecurityManager.pyo

%{mmdir}/Mailman/Site.py

%{mmdir}/Mailman/Site.pyc

%{mmdir}/Mailman/Site.pyo

%{mmdir}/Mailman/TopicMgr.py

%{mmdir}/Mailman/TopicMgr.pyc

%{mmdir}/Mailman/TopicMgr.pyo

%{mmdir}/Mailman/UserDesc.py

%{mmdir}/Mailman/UserDesc.pyc

%{mmdir}/Mailman/UserDesc.pyo

%{mmdir}/Mailman/Utils.py

%{mmdir}/Mailman/Utils.pyc

%{mmdir}/Mailman/Utils.pyo

%{mmdir}/Mailman/Version.py

%{mmdir}/Mailman/Version.pyc

%{mmdir}/Mailman/Version.pyo

%{mmdir}/Mailman/versions.py

%{mmdir}/Mailman/versions.pyc

%{mmdir}/Mailman/versions.pyo

%{_unitdir}/mailman.service

%doc %{docdir}

%dir %attr(0755,root,root) %{contentdir}/icons

%attr(0644,root,root) %{contentdir}/icons/*

%attr(0644, root, %{mmgroup}) %config(noreplace) %verify(not md5 size mtime) %{configdir}/mm_cfg.py

%attr(0644, root, %{mmgroup}) %config(noreplace) %verify(not md5 size mtime) %{mmdir}/Mailman/mm_cfg.py

%verify(not md5 size mtime) %{mmdir}/Mailman/mm_cfg.py?

%config(noreplace) %{httpdconfdir}/%{httpdconffile}

%config(noreplace) /etc/logrotate.d/%{name}

/etc/smrsh/%{mail_wrapper}

%dir %attr(2775,root,%{mmgroup}) %{configdir}

%attr(0644, root, %{mmgroup}) %config(noreplace) %verify(not md5 size mtime) %{configdir}/sitelist.cfg

%attr(775,root,%{mmgroup}) %{logdir}

%{_tmpfilesdir}/%{name}.conf

%attr(2775,root,%{mmgroup}) %{queuedir}

%attr(0644,root,root) %config(noreplace) %verify(not md5 size mtime) /etc/cron.d/mailman

%attr(0644,root,%{mmgroup}) %config(noreplace) %{mmdir}/cron/crontab.in

%attr(0755,root,root) %{mmdir}/bin/mailman-update-cfg

%dir %attr(775,root,%{mmgroup}) %{piddir}

%dir %attr(775,root,%{mmgroup}) %{lockdir}

%changelog

* Fri Mar 02 2018 Pavel Zhukov <pzhukov@redhat.com> - 3:2.1.15-26.1

- Related: #1545974 - Add import regular expression module

* Fri Mar 02 2018 Pavel Zhukov <pzhukov@redhat.com> - 3:2.1.15-26

- Related: #1545974 - Bump release to make it higher than 7.5

* Fri Mar 02 2018 Pavel Zhukov <pzhukov@redhat.com> - 3:2.1.15-24.2

- Resolves: #1545974 -  Add sanitizer to mitigate XSS injection

* Fri Feb 16 2018 Pavel Zhukov <pzhukov@redhat.com> - 3:2.1.15-24.1

- Resolves: #1545974 -  Fix XSS vulnerability in web UI

* Wed Feb 22 2017 Pavel Šimerda <psimerda@redhat.com> - 3:2.1.15-24

- Resolves: #1232737 - Fix instances of #!/usr/bin/env python in mailman

* Wed Feb 22 2017 Pavel Šimerda <psimerda@redhat.com> - 3:2.1.15-23

- Resolves: #1232749 - fix bad subject of the welcome email when creating list

  using newlist command

* Fri Feb 10 2017 Pavel Šimerda <psimerda@redhat.com> - 3:2.1.15-22

- Resolves: #1351939 - Mailman 2.1.15 and later crashes on more email

* Wed Jun 10 2015 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-21

- fix CVE-2015-2775 - directory traversal in MTA transports

* Tue Mar 17 2015 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-20

- fix #1107652 - do not install patch backup files in documentation

* Tue Mar 17 2015 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-19

- fix #1188043 - set 2775 permission only for /etc/mailman

* Mon Mar 16 2015 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-18

- fix #1107652 - add support for DMARC

- fix #1180981 - install tmpfiles.d into /usr/lib instead of /etc

- fix #1188043 - set 2775 permission for /etc/mailman

* Fri Jan 24 2014 Daniel Mach <dmach@redhat.com> - 3:2.1.15-17

- Mass rebuild 2014-01-24

* Thu Jan 02 2014 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-16

- fix #1044496 - fix setgid for cgi and mailman binaries

* Fri Dec 27 2013 Daniel Mach <dmach@redhat.com> - 3:2.1.15-15

- Mass rebuild 2013-12-27

* Tue Jul 23 2013 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-14

- build with full relro support

* Thu Apr 04 2013 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-13

- move mailman-update-cfg to /usr/lib/mailman/bin

* Tue Apr 02 2013 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-12

- fix #947191 - change contentdir to /usr/share/httpd

* Thu Mar 14 2013 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-11

- do not use py_byte_compile, remove python3-devel dependency

* Thu Mar 14 2013 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-10

- fix #921421 - fix /var/spool/mailman/ permissions

- fix #921423 - move mm_cfg.py to /etc/mailman

- move templates from /usr/lib/mailman to /etc/mailman

* Thu Feb 14 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3:2.1.15-9

- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild

* Tue Jan 22 2013 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-8

- fix #838580 - check if directories are 0755, there is no need to need

  02775 on all Mailman directories

* Thu Dec 06 2012 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-7

- remove fuzz=3 and rebase patches

* Wed Nov 21 2012 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-6

- clean up spec file

* Wed Oct 24 2012 Václav Pavlín <vpavlin@redhat.com> - 3:2.1.15-5

- Scriptlets replaced with new systemd macros (#850198)

* Tue Aug 21 2012 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-4

- fix ownership of unowned directories

* Thu Aug 16 2012 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-3

- Python executables does not need setgid

* Thu Jul 19 2012 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-2

- do not set setgid bit on directories where it is not needed

* Mon Jun 18 2012 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-1

- fix #822096 - update to version 2.1.15

- fixed httpd config file to work with httpd-2.4

* Wed Jan 11 2012 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.14-13

- fix #751581 - changed systemd service file to create error log with proper

  permissions, changed logrotate conf to swifth to proper username/group

* Wed Jan 11 2012 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.14-12

- fix #773188 - fix typo in reset_pw.py causing it to not work

* Thu Dec 15 2011 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.14-11

- fix #754898 - decode subjects

* Wed Oct 12 2011 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.14-10

- fix #745411 - remove Indexes from httpd config

* Wed Jul 13 2011 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.14-9

- fix #719371 - added native systemd unit file

* Wed May 18 2011 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.14-8

- fix #701539 - fixed permissions of all directories in mailman dir

* Mon May 09 2011 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.14-7

- fix #701539 - fixed cgi-bin permissions

* Tue Apr 05 2011 Jan Kaluza <jkaluza@redhat.com> - 3:2.1.14-6

- fix #688435 - set proper permissions for private archive

- fix badly rebased LC_CTYPE patch which caused newlist to fail with traceback